Impossible to connect to internet error C:\ProgramData\perfkill64.dll could not be started

Similar Questions

• every time I try to load it from the DVD the error appears as: "the application could not be started because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Original title: SPWIZENG.dll

  Hi, I got a cd of Windows 7 from my friend who is a software engineer so he gets all the programs (operating systems). It burned in a DVD instead of CD. So, every time I try to load from the DVD the error appears as:

  «The application failed to start because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Then when I click ok, it says:

  The file 'Autorun.dll' could not be loaded or is corrupt. Setup cannot continue.

  Help, please. I'm not good with computers and I honestly don't know what to do.

  Thanks in advance,

  :)

  Hello

  Are you able to play or open other CD or DVD?

  Step 1: These error messages may be due to corrupted media. Try to use the same media on another computer and check if you are able to use it.

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-upgrade-windows-7-error-code-0x7e/b1bfbe8f-7980-4847-a186-2206e87c6bc4

• Trying to connect to a Web site, the following message displays error Impossible to connect to the database from the database. Could not connect to MySQL. It is only on a single Web site. What is c. What should I do?

  Could not connect to MySQL

  1. it sounds like a problem on server-side (which means there is nothing you can do about it probably)
  2. which site?

• When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.

  Error message: a message session could not be started. Please check your MAPI installation - sending email from MYOB

  When I try to send an email to MYOB I get error message saying: "an email session could not be started. Please check your MAPI installation '.

  How can I solve this problem?

  Hi all

  I have a workaround which is a little less boring that the patch "restart the PC": If you get the error where MYOB crashes when you try to send an e-mail, open Task Manager (ctrl-alt-del or right click on the start bar), then go to the "Processes" tab and close all instances of wlmail.exe using the button "complete the process".

  It seems that this error occurs if you have Windows Live Mail opened when you try and send emails of MYOB. If you then close WLMail after that get the error the process seems to never close, so you have to close it manually. If you send all your emails with closed WLMail MYOB it seems to be OK.

  See you soon

• popup error message on my computer that says an application could not be started

  Hi, my name is Grace.

  I have a popup error message on my computer that says that an application could not be started.  He said I need to contact the vendor of the application, but I don't know what application it is, or who is the developer.

  The message says: "wyabrax.exe - this application could not be started."  When I check the details all that I get something SHIM .net is something.  Here are the details that I get,

  ------------------------------------------------------------------------

  Error: "this application could not be started."

  Error message

  This application could not be started.

  Cause

  The app is not configured in a way that allows to determine the appropriate version of the .NET Framework runtime. The shim code is SHIM_NOVERSION_FOUND.

  Resolution

  You can not solve the problem of configuration yourself. Contact the application vendor to fix the problem.

  ------------------------------------------------------------------------------------------------------------

  The problem is that I don't know what application it is.  How can I find so he can stop interrupting my work on my computer?

  Thank you in advance!

  Hello

  Google has no information on wyabrax.exe.

  It may be a left over starting entry of Malware that has been removed from your security programs.

  This is a suggestion for you:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V12.03"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• DLL could not be opened error at startup.

  Whenever I boot, I get an error message - he says DLL could not be opened.  Anyone know how what it is or how to get rid of?

  Hello

  Try the methods below and check if that helps:

  Method 1:

  Safe mode:

  Follow the link mentioned below steps to start the system in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are not facing problems in safe mode, and then try Method 2:

  Method 2:

  Clean boot:

  http://support.Microsoft.com/kb/929135

  (Note: follow step-7 since the link above to start in normal mode.)

  Hope the helps of information.

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.

• Wi - Fi connection error: the hosted network could not be started.

  Original title: need help Urgent

  I get this error message. I'm not able to start the wifi sharing in my lenovo ideacentre desktop. I'm not able to see the microsoft wifi adapater everywhere in my office, even in the Device Manager and the adapter option Add.

  C:\Windows\System32>netsh wlan start hostednetwork
  The hosted network could not be started.
  The group or resource is not in the correct state to perform the requested operation.

  Hi Siddha,

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How can I fix WinMail error code 0 x 80070002, MSOE.dll could not be initialized?

  Suddenly, I was unable to access my aol e-mail account via winmail as I did for some time.  I get an error message that says: "Windows Mail could not be started.  initialize junk filtering.  Your computer may be out of memory or your disk is full. (0 x 80070002) ».  My only option is to click OK.  Can I get a second message which reads: ' Windows Mail could not be started because MSOE. " DLL cannot be initialized. "I ran virus scans, I tried to reinstall Windows Mail, I checked the Microsoft Knowledgebase and I restored my computer to a point before you have the problem.  I can access my AOL e-mail account via the Internet, but really have problems with the functionality, and I can't access any previous mail in my Inbox or one of my registered email.  Can someone tell me what's happened and how can I fix the problem?

  Hello

   
  Method 1: You can reset the message storage location and which can allow you to run Windows Mail.

  Navigate to the following location:

  Mail C:\Users\{yourusername}\AppData\Local\Microsoft\Windows
  Note: (The directory may be hidden, go to control panel |) Folder options | View and activate
  display of files and folders hidden and also uncheck the hide option
  extensions of known file types).
  Rename this directory from Windows Mail to Windows Mail old and then start
  Windows Mail and it will introduce a new message store in a new directory of Windows Mail.
  Note: If make you it work, then you can go to file | Import |
  Messages and point to the old directory.
   
  Method 2:
  You can try to remove the Windows Mail registry key and if
  It doesn't work, then try to delete the identity key.
  (a) click Start, type run and press enter
  (b) in the execution type search regedit and press enter
  (c) go to the following location:
  
  HKEY_CURRENT_USER\Software\Microsoft\Windows Mail
  HKEY_CURRENT_USER\Identities
  Note: Make sure WinMail is closed, right click on the key and
  Click on delete.
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
   
   
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail 
   
  
   

• Autorun.dll could not be loaded error code (0X3E7) or sometimes (0XC1).

  I bought the windows family pack 7 at Wal-Mart.  I'm trying to install it on my desktop dell XP computer.  Everytime I try it says ' the autorun.dll could not be loaded or is corrupt Setup cannot continue error code (0X3E7) or sometimes (0XC1).»  Sometimes, I have an error spwizeng.dll.  Sometimes it seems to read the disc, it shows is a Readme.txt file and this file explains this disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.  I have the last wood, firm dishes and drivers. I ran windows & update manager and he did not find any problem. I am trying to install the 32-bit version.  I tried this drive on our computer dell laptop on vista and it seems to work OK.  I did an internet search and it says reburn the DVD.  It is a store brought the DVD.

  He had the DVD player.  I tried to reinstall the programs with her and it lock on.  I'm out brought a new now everything is fine.

• Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

  I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

  I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

  The file 'autorun.dll' is present on the disk.

  I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

  My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

  Thank you.

  
  

  
  

  OK, so, this response is a little late to come, but if you never solved...

  I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
  I hope this helps...

• Windows Live Messenger error: A conversation with (user name) could not be started. Please try again.

  When you try to send a text message to a number using Windows Live Messenger I get this error: "a conversation with (user name) could not be started. Please try again. "I can't send a text message to a phone using Windows Live Messenger. What is the problem?

  Ask in the Windows Live Solution Center Portal Messenger.

• Outlook express could not be started, error: 0 x 8000040005, 183

  Original title: 0 x 8000040005, 183

  I get this code, my quick books does not more open because I tried to send an e-mail here.  It says "outlook express could not be started. The application could not open message store outlook express. Your computer may be out of memory or your disk is full.  Contact support technique microsoft for further assistance, 0 x 8000040005, 183' Please help!

  Hello

  The file in which outlook express stores messages are filled, so the error code.  I suggest you to change the location of the file where the messages are stored.

  Perform the steps mentioned below and check if this is useful:

  Method 1:

  (a) open outlook express

  (b) click on Tools.

  (c) click on options.

  (d) go to the maintenance tab and the store file.

  (e) click Edit.

  (f) c/documents and settings/directors name/outlook express contract

  (g) restart the computer

  See also: http://support.microsoft.com/kb/245419

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/  

  
  Method 2: if the problem persists, perform the following steps:

  (a) open the Windows Desktop Search Options

  (b) click Edit and clear the checkbox next to Outlook Express.

  (C) click on 'OK', then 'close'.

  Let us know if you face any issues.