XControl - behavior strange element parameters

Similar Questions

• Behavior strange screen/video Satellite Pro P100-109

  I have a strange problem with my Satellite Pro (P100-109 model pspa3e 00n009du). I edge video card printing is letting me down, so if anyone has a solution so please help!

  Yesterday, while working properly since I bought the machine, I had a strange video behavior. Black icon arround windows not updated correctly etc.
  After a restart of the system, these problems seemed resolved, but it lasted just a view minutes.
  After awhile, I got a blue screen (BCCode: ea BCP1...) BCP4:00000001 SP: 2.0) learned Internet research that his had to do with the video driver.

  Symptoms of the display:
  -Vertical dotted lines shown on the screen of the bios toshiba (variety of colors)
  -Loading of Windows show a few vertical lines as well
  -After loading the clickable elements appear black (not titles of window - no buttons shown/rendering)
  -L' screen goes black every 4 seconds
  -System responds very slowly, but sometimes it seems that it works normally
  -mouse disappears
  -After awhile that I get a black screen, system does not answer more.
  -In windows safe mode (so do not using the nvidia drivers), the display seems to work normally

  DID the next trying to solve my problem in vain:

  -J' I uninstalled/removed the nvidia drivers and installed the last on the toshiba site.
  -Deletion of original and installed drivers drivers Guru3D site (also used the Driverutility from the same site).
  -J' I uninstalled/removed the nvidia drivers and installed the original
  -Upgrade to SP3

  Uninstalling the driver (in safe mode) and so to use a generic driver only seem to work.

  Anyone know how this can be resolved or are these signs that the nVidia GeForce Go 7900 has been roasted.

  Hello

  Long story. short answer...

  It is really possible that your GPU chip malfunctions.

  I came to this conclusion because the laptop don t symptoms occur if the graphics driver is not installed.
  If the graphics card driver is installed the graphics card would go with the best performance and possibly graph questions would appear once again.

  I think that you can't do anything to what might solve this problem outside to contact the ASP in your country and ask for help.

  Good luck

• Tecra 8000: Behavior strange keyboard after reassembly

  Hello

  After reassembling the individual keys on my keyboard in Tecra 8000, the keys have a strange behavior. For example, if I press the 2 key the display shows '82' or 'q '. If I hold the button longer, the display shows "2222222222222...", the right to sign for the key. "
  You know, what can I do?
  I had to go back the key because my little niece takes off all the keys.

  Thanks for your reply,
  Butch

  Hello

  I agree with Daniel. There is a technical problem and the only thing you can do is to try to clean the contacts. If there is no success, you need to replace the keyboard. This unit is older and I am sure you can find a used keyboard at low prices.

  Good bye

• Behavior strange table when getting values

  I have a table that contains the TypeDef'd controls and I need to get a reference to the control of each element individually. To do this, I use the values property of the array Index that I put to the index of the item that I want to get. From there on, I can get a reference to the control. This occurs when the value of the table is changed through a simple value change event.

  When you change the value of an element, and then by using the property of Index values for the reference control at this level, the control returned reference is not one that should be. What seems to happen when I change an element in an array, this item automatically becomes the index '0' in the table itself. It's a very strange behaviour and I tried to go around for a little while. I've attached pictures of the screw that I use to show you everything.

  In the first image, I stressed the important portions in green. Going from left to right, the first Green Watch box that I'll put the index at which the table should be starting at 0. The reason I do this is because it is possible that the index display may be replaced by another value and lag between what we expect, it is (0). In the loop for, I set the property to Index values for what is the value of i. This, in theory, loop through all the items in the table, and then I get the value and the reference of this element. In the probe window, you can see the different values of the sons and I will refer to this in a second.

  In the second picture you can see the value of the table on the real front. The values of the sensors in the first picture taken after that I changed the value of one of the properties of the "Alarm 7" line. The value of the façade, it is clear that the 'Alarm 7' index value is 2, but when you look at the probe in the first image there shows that it is at index 0. Anyone know why this is happening and how to get the references to their actual index?

  1.

  

  2.

  

  
  

• behavior strange m3u

  I'm ready to take my clip 4 GB at best buy - I am a few days on the return policy.  Or check myself in an asylum. This is beyond frustrating.  I used the playlist creator 3.5 and mp3 tag to create playlists with clip in msc mode.  All the mp3s and playlists are in the music folder.  This is what happens:

  3 selections show as empty.  I can put the mp3s in the existing playlist with other mp3s and they will show. So the mp3s themselves aren't a problem. They will not work in their own playlist.  HOWEVER, if I create playlists of replacement with exactly the same mp3s the following weird things occur:

  For a set of mp3s, the orignial playlist works but only as long as the alternate playlist, which now displays under vacuum, is left on the clip.

  For the two series of mp3s, the playlists of alternative works, but only as long as the original playlists, which still show as emptly, are left on the clip.

  If I delete all remaining empty playlists, playlists also show empty makes me to square.

  All the other playlists created with the same programs work very well.  It makes no sense, so I think that the memory is damaged or defective.  I've updated the firmware, put in shape, several times by using all the methods in the forum.  I think that sansa trying to push me over the edge with this wicked game!

  Should I try again with another element?

  It seems that the bizarre behavior of mp3 I lived is fixed in the latest fw-thanks SanDisk!

• Behavior strange Portal NMP

  SNTC portal has a strange behavior:

  -Admin white dash

  -Summary of the inventory information about devices but everything is empty

  -Able to download a current ratio and loans received by e-mail however my reports is empty

  Any suggestions for investigation?

  Thank you all

  Hi Christophe,

  What browser do you use? I would recommend Chrome or Firefox. If you are already using one of those, I would recommend to empty your cache and restart the browser. Finally, try to open the portal in an ingognito tab. If the problem persists after trying these fixes, please update this post with a screenshot or two examples you provided.

  Thank you

  Nathalie

• Behavior strange question slides as well as a countdown timer!

  Hello Captivators,

  I am facing a strange behavior on the slides in question with a countdown. Whenever I have put a countdown on a question slide, one of the options and answers disappear. What's not here? Am I missing anything in the settings?

  I am using Captivate 8 (Trial Version).

  
  

  

  
  

  

  Thanks in advance for your support.

  Greetings

  Please, do not post the same question twice... Will check this point, but had to read your question twice. Not very friendly to post in several forums.

• Seriously the behavior strange opening file HAVE CS5 Mac

  I don't really know how to find solutions to this problem, but today when I opened a file existing art Illustrator immediately took a part of the project and gave him a white fill with black outline... I thought that I had pushed a button and accidentally caused cela, but when I hit undo, nothing happened. When I looked in the Edit menu, the selection of the cancellation was not available. Close the document without saving changes, leave IT and I has reopened the case. Same thing happened. Then I restarted the computer. Same thing. Opening a different file does not do. Check out the screenshots for before (screenshot of an overview of the Finder) and after (once the file is opened in Illustrator). When the file is opened, for a brief moment, all right and then something happens, and the document is converted. If I try to close the document, I request if I want to save the file (which I did not). Anyone can shed light on this strange behavior and how to fix it?

  Thank you!!!

  -g-

  It's the beforemath:

  

  It is the sequel:

  

  It almost seems that a script runs. I'm retired.

• Query Sub behavior strange when using Expressions regular Oracle

  I met a strange "inconsistent" when you use an Expression regular Oracle with subqueries in SQL. Here are some details on how to reproduce what I have observed. We managed to find a solution to this "problem" using a database index; I'm writing this case hoping to better understand why Regular Expressions Oracle do not seem to work in the same way that the older, standard functions integrated as INSTR, SUBSTR, AS, etc..
  
  Environment settings:
  This test has been done using Oracle XE (GR 11, 2) on 32-bit Windows operating system. For my test, I used the HR schema (which is delivered pre-completed with the installation of this product) with some modifications of my own.
  
  Make the Test objects:
  

  create table hr.emp_test as
  select to_char(employee_id) as emp_id_char, employee_id as emp_id,
  first_name, last_name, hire_date
  from hr.employees;

  To illustrate my test, I inserted mixed alphanumeric values and a null value in the column of my emp_id_char for good measure:
  

  insert into hr.emp_test (emp_id_char, first_name, last_name, hire_date)
  values ('XKCD123','TEST','LASTNAME',sysdate);
  insert into hr.emp_test (emp_id_char, first_name, last_name, hire_date)
  values (null,'TEST1','LASTNAME2',sysdate);
  commit;

  * (1) this request fails once a nonnumeric value is inserted into the emp_test table.*
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date 
        from hr.emp_test  )
  select * from sub1
  where emp_id between 100 and 110

  * (2) this query works OK.*
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date 
        from hr.emp_test where emp_id_char not like 'X%'  )
  select * from sub1
  where emp_id between 100 and 110

  * (3) this query works OK.*
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date 
        from hr.emp_test where instr(emp_id_char,'X',1) = 0 )
  select * from sub1
  where emp_id between 100 and 110

  * (4) this query Fails.*
  

  with
     sub1 as ( select emp_id_char, first_name, last_name, hire_date
                 from hr.emp_test
                where regexp_instr(emp_id_char, '[^[:digit:]]') = 0 ),
     sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
                from sub1 )
  select *
  from sub2
  where emp_id between 100 and 110
  
  ERROR:
  ORA-01722: invalid number

  * (5) even down the results of the rational expression of 3rd under the query in sequential processing order also FAILS *.
  

  with
     sub1 as ( select emp_id_char, first_name, last_name, hire_date
                 from hr.emp_test
                where regexp_instr(emp_id_char, '[^[:digit:]]') = 0 ),
     sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
                from sub1 ),
     sub3 as ( select emp_id, first_name, last_name, hire_date from sub2 )
  select *
  from sub3
  where emp_id between 100 and 110
  
  ERROR:
  ORA-01722: invalid number

  * (6) that it does not like previous query as well *.
  

  with
     sub1 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date,
         regexp_instr(emp_id_char, '[^[:digit:]]') as reg_x 
         from hr.emp_test 
         where reg_x = 0),
     sub2 as ( select emp_id, first_name, last_name, hire_date, reg_x
        from sub1 where reg_x = 0 )
  select * from sub2
  where emp_id between 100 and 110
  
  ERROR:
  ORA-00904: "REG_X": invalid identifier

  Our Solution...
  Add a hint to the query of sup that 'hiding' the result of sub1 in memory. That did the trick. This suspicion resembles only viable workaround for this behavior. Other old built-in functions (INSTR, AS, etc.) an they were automatically following the execution plan (results of cache memory) that he had to use a 'hint' to force with the function of the regular expression.
  
  The conclusion, which is what I would like to help to understand or explain is that:
  If you create a series of queries/sup queries or inline views, values depend on "regular expression" type built-in sql functions do not seem to stick or maintain when implemented in complex query logic.
  
  Any idea is appreciated!
  Thank you!
  
  Published by: 870810 on July 6, 2011 15:47

  870810 wrote:
  I met a strange "inconsistent" when you use an Expression regular Oracle with subqueries in SQL.

  This is the expected behavior and has nothing to do with regular expressions - much less directly (I'll explain later). Main rule: there is no WHERE clause predicate order. Even if you use views, views online, subquery factoring, optimizer etc. can extend your display, display online, a subquery factoring. And it's Optimizer who decides the order of execution predicate unless you use the ORDERED_PREDICATES key. Now, I can explain. Regular expressions are powerful enough but also everywhere in life to pay for it with the higher cost of execution. That's why optimizer decides to apply emp_id between 100 and 110 first and regexp_instr (emp_id_char, "[^ [: digit:]]'") = 0 later.

  explain plan for
  with
  sub1 as ( select emp_id_char, first_name, last_name, hire_date
  from emp_test
  where regexp_instr(emp_id_char, '[^[:digit:]]') = 0 ),
  sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
  from sub1 )
  select *
  from sub2
  where emp_id between 100 and 110;
  
  SQL> @?\rdbms\admin\utlxpls
  
  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------------
  Plan hash value: 3124080142
  
  ------------------------------------------------------------------------------
  | Id  | Operation         | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  ------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |          |     1 |    57 |     3   (0)| 00:00:01 |
  |*  1 |  TABLE ACCESS FULL| EMP_TEST |     1 |    57 |     3   (0)| 00:00:01 |
  ------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------------
  
     1 - filter(TO_NUMBER("EMP_ID_CHAR")>=100 AND
                TO_NUMBER("EMP_ID_CHAR")<=110 AND  REGEXP_INSTR
                ("EMP_ID_CHAR",'[^[:digit:]]')=0)
  
  15 rows selected.
  
  SQL> 
  

  As you can see, optimizer uses a FULL SCAN to read data from the table and apply emp_id between 100 and 110 which translates TO_NUMBER ("EMP_ID_CHAR") > = 100 AND TO_NUMBER ("EMP_ID_CHAR")<=110. and="" obviously="" it="" fails="" trying="" to="" convert="" xkcd123="" to="" number.="" now="" cost="" of="" instr(emp_id_char,'x',1)="0" is="" lower="" and="" optimizer="" decides="" to="" apply="" instr="" first.="" therefore="" xkcd123="" is="" filtered="" out="" before="" to_number="" is="">

  SQL> explain plan for
    2  with
    3  sub1 as ( select emp_id_char, first_name, last_name, hire_date
    4  from emp_test
    5  where instr(emp_id_char, 'X') = 0 ),
    6  sub2 as ( select to_number(emp_id_char) as emp_id, first_name, last_name, hire_date
    7  from sub1 )
    8  select *
    9  from sub2
   10  where emp_id between 100 and 110;
  
  Explained.
  
  SQL> @?\rdbms\admin\utlxpls
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------
  Plan hash value: 3124080142
  
  ------------------------------------------------------------------------------
  | Id  | Operation         | Name     | Rows  | Bytes | Cost (%CPU)| Time     |
  ------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |          |     1 |    57 |     3   (0)| 00:00:01 |
  |*  1 |  TABLE ACCESS FULL| EMP_TEST |     1 |    57 |     3   (0)| 00:00:01 |
  ------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------
  
     1 - filter(INSTR("EMP_ID_CHAR",'X')=0 AND
                TO_NUMBER("EMP_ID_CHAR")>=100 AND TO_NUMBER("EMP_ID_CHAR")<=110)
  
  14 rows selected.
  
  SQL> 
  

  The bottom LINE: With the help of strings to store non-chaine (numeric in your case) is never a good idea and shows design problems.

  SY.

• Target and trigger a behavior strange reversal

  I searched around forums but you have not found this problem or resolution.

  I was hoping to use a reversal on the ToolTip widget event to have balloons pop up explaining certain elements of a chart. I followed the example of Rufus in the video. I created originally the ToolTip so that everything was visible, organized correctly, then tried to make the points of reversal with no fill.  More specifically some of the things that happened (and none of them systematically):

  • The first access point has been defined "no fill" and then verified in preview - seems good
  • The second hotspot has been set to "no fill" then checked preview - now known th it returned to gray and the second was gray too.  However, when I saw and turning spots, the reactive truns of transparent grey and the ball appears.  So if I overthrow the next spot, the first goes back to opaque gray and the other is now transparent.
  • I tried to simply change the color in green on a third hotspot just to see if there was a problem of transparency.  Nope.  When you preview, the spot is still gray, but when I place turning it turns green, and the ball is triggered.
  • Even in design mode, the new color will not be displayed, it remains just gray.  I can change the colour, say green, and it will display properly, until I click on an another hot spot to change its color.  The hotspot previous poster then as gray.  If I then click back to this place, it lights up new green.  So Muse knows it is supposed to be green but it will not display.
  • Finally, I have five points in a row.  When the mouse above left to right one of the hot spots will be transparent turns and stay, when I smile and then from right to left it grey turns again.  If it wasn't weird enough, then when I roll from left to right and left, then right again, it will remain transparent.

  I tried to set a color and the opacity to 1% as suggested in another thread, but it has not yet changed the color of the hot spot.

  Could someone please help with this problem.  I see other problems with viewers etc., but this one is quite perplexed because of the random appearance.

  I tried to try another on a blank page just for confirmation and the same behavior that's happened.

  All I want is for the hot spots of trigger transparent and stay like that.

  Thanks in advance.

  Jeff

  Hey,.

  Please take a look here: http://aad6a8dasda7das9d.businesscatalyst.com/default1.html and let me know if the behavior for the first hotspot is what you need in your case. This is controlled from the "Status" window: http://screencasteu.worldsecuresystems.com/Cristi/2012-05-07_1815.png
  If you have a test site where I can see that the hotspot in question please let me know. I think my explanation above should fix this problem.

  If there is something different that you are after, and I missed that informed me.

  Kind regards

• Behavior strange translation...

  Hi all
  
  I tried to translate my application I m bit get strange errors. Here´s what I did:
  
  1. mapping language. source app: 101, target application: 201 - worked
  2. text of the translation of seeds-worked
  3 translated some articles, just to test...
  4 downloaded xliff - worked
  5 apllied xliff to app no. 201-works
  
  so I expected now see an apllication called 201 in the application builder. But anyway there. it s nothing has changed.
  But if I go to URL f? p = 201:1: I get an error:
  

  ORA-0000: normal, successful completion
   Error Unable to fetch authentication_scheme in application 201.  
  OK

  below this there is my Developer toolbar and I can click on "Application 201", which leads me to the application builder where I see my translated application... strange!
  I navigated to the shared components > authentication > plans, no scheme has been marked as current. I tried to make one of them is current but it fails without error message.
  
  any ideas?
  
  Greetings,
  
  Sebastian

  What I used was preferably point (point of use containing preferably) and I created the element of the application FSP_LANGUAGE_PREFERENCE.

  I switch languages using flags as links in the navigation bar (but you can also use a button with a redirect to URL option) with:
  ASK LANG =
  point Set FSP_LANGUAGE_PREFERENCE: =

  In order to ensure the correct language is displayed, I created an implementation process called OnLoad: BeforeHeader with condition when demand = LANG to refresh the page when a language is placed. That should solve your problem with the poorly planned language.
  Which is caused by the order in which the APEX shows you the page and sets the language of preference.

  begin
    owa_util.redirect_url('f?p='||:APP_ID||':'||:APP_PAGE_ID||':'||:APP_SESSION);
  end;
  

• Behavior strange iMac

  My iMac is only around the age of five months. (iMac 5K, 27 inches, end of 2014) In the first month, he began acting strangely.

  Happening every other day, then every day, now, maybe two or three times a day.

  If I leave on for some time, it was impossible to all suddenly typing in the search bar of safari (or amazon, etc.). Each letter would take a few seconds to appear, and the popup of alternative character would start to appear on the letters. Then, when I choose to restart, in the "are you sure...". ' popup instead of an icon of power in one button circle, it would be an arrow in the circle. Reboot would be back to normal, but now more and more short periods.

  I was hoping it would be after the OS updates, but it's just got worse.

  Everyone this experience or has an idea of what might happen?

  This keyboard exact problem happened to me 3 or 4 times over the last two months, with the extra trouble losing volume control (it will either mute or maximum). Restart usually solved it but not this last time (yesterday and today). He seems to have stopped in itself allows me to type this. You wonder if it's a question of bluetooth.

  I got this imac for well over a year, the problem does not appear until I "upgraded" to El Capitan. Hmmm.

  I understand these things myself, but I can call it Apple support next time.

  iMac (27 inch, end 2013) El Capitan 10.11.3 Version

• Behavior strange keyboard Lenovo Y-50

  Hey. My Lenovo Y-50 is a little older than a year, and all of a sudden the keyboard started acting strangely. On the windows login screen, everything is normal, but then the keyboard does not work. When I turn on the keyboard on the screen it starts to work immediately. Any ideas what the problem may be?

  Hey, I tried everything and nothing seemed to work. But then I turned off FilterKeys, allowed him once again and tweaked the settings a little bit and now everything worked for a few days. I don't know what it was, but the problem seems to have been in the settings for FilterKeys.

  Thanks for the quick response.

• Behavior strange battery on the iPhone 5 with iOS 9.2

  After installing iOS on iPhone 9.2 5 phone consumes my battery unusually quickly and in a very strange way.

  Specifically, after be recharged to 100%, it can go up to almost 60 to 50% within 1-2 hours of waiting use or with some very basic internet as e-mail, facebook, whats app etc. (not youtube or other battery consuming requests, no call phone and not a lot of applications running on the bottom). If I do 2-3 a few phone calls, the battery can easily go to 0. Another strange issue is that sometimes when the battery indication is around 60-65% the phone is suddenly switched off indicating low battery. I can't turn back on until I plug in power. Then my battery will immediately 0% back to 60-65% and charing. If I disconnect the cable again and wait a few minutes, it climbs from 60 percent to 15 percent. If I connect the cable again, as it did at 60%. A few more times, he spends 40 to 45% to 10% in both directions.

  My wife has an iPhone 5 with iOS installed 9.2 and has similar problems with the battery. On previous versions of the software that we have never had such problems, the battery is sufficient for use throughout the day with plenty of internet and other applications and a few phone calls. My phone is now almost useless, the only way to take the battery throughout the day is to have it on the stand mode with all applications closed and no phone call, and once again the battery remains close to 100% for a long time.

  Is a known, issue y at - it solution or something I can do like downgrade the SW, or should I wait for the next version of the software be released?

  Make an appointment at the genius bar and have checked phones.

  Some units of the iPhone 5 have been manufactured with a defective battery. Apple has a program in place to replace them for free. You can check here serial numbers if your phone is part of the program. https://www.Apple.com/support/iPhone5-battery/

• Behavior strange cursor Lenovo Flex 15

  Hi all

  I bought a Lenovo Flex 15 and it downgraded to Windows 7. Everything works like a charm, except that sometimes the cursor starts moving on its own at the top left of the screen where the "computer" and "My documents" folders and it starts to open up to them.

  This behavior occurs randomly... do you know what is the cause?

  Thanks for the help.

  Atom

  If you have disabled the touch controller, the jump stop. However, this isn't really a solution.

  Try to wipe the edges of the laptop with a Microfiber cloth. It should improve it a little.