Impossible to debug in Simulator

Similar Questions

• Impossible to debug as - > Blackberry in Eclipse Simulator

  Hello

  I've implemented an application for some time using Eclipse 3.5 and Blackberry plugin version 1.1.2 without a lot of questions, but recently, I was stuck on this one:

  Whenever I try to "Debug slot-> Blackberry Simulator ', Eclipse crashes at 31% saying"delegate launch. " This leaves me in a bad spot for my application debugging. However, I only peut 'run as-> Blackberry Simulator '.

  I tried the new configurations debug with different simulators. I tried to re-intsalling the eclipse + blackberry plugin. I'm still stuck with the same question.

  Can anyone share ideas they might have on it, or suggest how I could resolve this more?

  Thank you

  Jon

  Apparently, it had something to do with the BBDevMgr process running. When I killed this process in windows Task Manager, Eclipse was able to start the Simulator in debug mode. All good now!

• Impossible to debug Flash to iOS Simulator

  Hello

  AIR Beta 15 (302) and 2014 use professional Flash, Flash throws the error "unable to install the application on iOS Simulator."

  The SDK path is set to /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/S DKs/iPhoneSimulator8.0.sdk

  I use profile development and selected the Debug Mode...

  Thanks for any help you can give.

  Craig

  I can suddenly using AIR 16 but not AIR 15.

• Impossible to debug UIWebview with Safari 9.1

  Recently updated to El Capitan 10.11.4, it comes with Safari 9.1. Now, I'm unable to debug UIWebview on iOS Simulator (tested on 9.2 iOS and iOS 8.4. both don't work). In the setting of safari Simulator are as follows. Inspector Web is running, JavaScript is activated. Website fraud warning is DISABLED. In Safari for Mac menu develop appear, the entrance of Simulator appear when the Simulator was launched but only show JSContext. The UIWebview embedded in our application does not appear in the submenu of the Simulator. All the web pages in safari iOS does not appear as well. Is there a setting that I missed? It worked before the upgrade to 10.11.4

  Hello ahuang105,

  If you are a developer, you cannot act as a user.

  This means that you need to test the Apple software throughout each cycle of beta. You need to do this test on a complete ecosystem "burner" - iOS devices, Mac, Apple ID dedicated to the beta test. Along the way, so something that you develop breaks in all of this, you will be able to report a bug to Apple and to develop an alternative solution in case Apple releases with the bug.

  In the same time, another complete ecosystem production - Apple ID, Mac and iOS devices all dedicated development of production - needs to stay on the most recent version has no crippling bugs. For El Capitan, your guess is as good as mine what build that can be. 10.11.3 I guess.

  For now, I suggest to ask in the developer forums if this bug in particular is fixed in 10.11.5. I have seen engineers Apple recommends this build for Simulator in 10.11.4 problems.

• FPGA debug using simulated via custom IO VI - error message

  I have a 7966R SMU with interface MXI Win7-64 / LV2013 - 32 bit. The installation works. VI can execute on the target FPGA.

  I want to debug a FPGA on the host vi use simulated via custom VI IO. I try to follow the tutorial using LabVIEW: Tutorial: creating test (Module FPGA). Did the custom test vi and the "inverter.vi" and set the mode of the simulated performance.

  When you run the "inverter.vi" (FPGA target but for now simulate on host computer) I get this error message dialog box:

  Current run
  An another FPGA VI for this target is already running on the development computer. Stop the other VI before running this vi.

   

  

  I don't see where I could stop this other fpga vi. Actually I don't know this other vi at all. Here is the project, which may not be very simple:

  

  Tips are welcome.

  Can you show us what the host vi looks like?  You open multiple references to the same FPGA vi?

  You close the refecence when you complete the vi?

  Can you try to close completely, LabVIEW can open an example flexrio from the finder example and trying to run it on the dev machine?

• Impossible to debug on real device

  Hello

  When I try to debug an application on a real device debugging I get an error that a debug file is missing.

  After the tutorial on http://supportforums.blackberry.com/rim/attachments/rim/java_dev@tkb/18/1/How_to_Debug_and_Optimize _... he said that I may receive this error if "the reason why this might happen is that the version of the software on your device does not correspond to the.
  the software version of your Simulator

  I use blackberry curve withDevice software versio 5.0.0.103

  The research unit of the Simulator for OS 5.0.0 it does'nt seem to be a simulator for this version of the software.

  What can I do?

  You must launch the application manually on the device. I don't know why the breakpoints are not recognized. Try to delete the app, reboot the device, the app package, sing, load (debug as)... you can tell that the debugger is attached with success by the lines displayed in the Console view.

• Impossible to debug app due to AccessControllException

  My application uses the PersistanceStore to store an array of strings.

  When you start the application in the normal mode (non-debug), it works fine.

  When you start the application in debugging mode, it tells me that CrossApplication is not possible due to the AccessControllException.

  It seems that the app is not recognized to be the same application when starting in debugging. Reset the same the entire memory as NVWam, SD card and the file system does not solve this problem.

  After reset of all memory, I always get the same exception. Even if, during startup in normal mode, my app tells me that no peristence for this specific key object has been found (if clear memory worked!).

  How to deal with it in debug mode?

  Thank you

  I found a batch/sh file that cleans the directory of simulators (takes 5 min), after that I'm able to debug again. Very strange!

  the file was in eclipse under: eclipse\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.29\components\simulator\clean.bat

• Impossible to debug with 9000 device

  Hi, I develop a little app that I debug in the Simulator and now I wan't to test on a real device.

  I have connected my BB Bold 9000 to the Pc via the USB cable and selected "join" in the JDE.

  Currently, I get lots of messages like "cannot find NET_RIM_APPMANAGER. DEBUG ".

  If I navigate to the directory of Simulator and select this file, then I0ve has received the message "(debugging information Bad C:\program files... \net_rim_appmanager.debug(4873cc83)-net_rim_appmanager (48c06f7e).

  I think the problem is a version mismatch, I downloaded the last Simulator ("version 4.6.0.92 (9000 Telefónica)"), but if I look in my camera in options-> it reads: "Blackberry 9000 (3G, Wi - Fi) V4.6.0.147 (Platform 4.0.0.144)".

  So, how can I get the files of debugging for the version V4.6.0.147 or how can I downgrade my V4.6.0.92 device?

  THX in advance for your help

  Concerning

  Alejandro

  Well, everything is now resolved.

  I found this post explaining that, sometimes, the JDE errors the need for signatures of a code particularly (in may cases, says JDE he needed RBB, but also RRT.) Thus, the .csl file editing and adding 52525400 = RIM API execution it compiles and runs correctly.

  So now that the code is executed, I can debug, even with the missing .debug files.

  Thx for your help, and I hope this can help someone else...

• Impossible to debug in Eclipse

  Hello

  I'm trying to debug an application in a true smart phone BlackBerry. I use Eclipse for a 8703e with OS 4.2.1.110.

  When I run the debug option, he tell me that I lack the net_rim_app_manager.debug file. I saw on the forum I need to navigate to the folder of the Simulator and select the correct file. I tried with all version of Simulator and Eclipse always telling me that I don't have the right file. I've read elsewhere that I need the exact os version of the Simulator, but there is no RIM Web site. I use the 4.1.0.359 version so that the Simulator for the 8703e.

  If I ignore the error message, as I read in another post, debugging starts, but my breakpoints doesn't work.

  What can I do? Any ideas? I really need to debug on the real device, cause all works on the Simulator, but I have problem in the actual device.

  THX

  I found the problem! The version was not quite the same thing (only an IP in a change of HttpConnection) so the debugger do not stop.

  For all the people who have this problem, make sure you have the exact same version of the application installed and use in Eclipse (do not add a space online!).

  Thx for the support

• New SDK and Simulator installed, BUT impossible to deploy on Simulator... Simulator Option out - sail Buritto OSX

  Hey guys,.

  I installed the new 1.0.1 SDK and Simulator without problems...

  In my prefs Burrito... I chose BlackBerry Tablet OS and change 0.94 path to the 1.0.1 folder sdk...

  When I try to set up the debug configuration... I can only run my application locally... Cannot select the option Simulator... It is unselectable and greyed out

  See this screen below:

  

  Is there something I'm missing here? Thanks in advance.

  Never mind... It's been a while since I deployed Simulator... You must click the radio button device... to select the Simulator... Who is intuitive?

• Impossible to debug a library project

  I have programmed a Blackberry CLDC project relying on two Blackberry library projects included in the application through the Eclipse Java Build Path project. When I start the app in the Blackberry Simulator, I am able to debug the code of one of the two projects of library, but not the other. Breakpoints in the library are ignored, and if I try to enter this library method calls, the debugging process freezes.

  It all works very well with the other library.

  Someone has encountered this or knows how to solve?

  I'm programming with the Blackberry Eclipse Plugin under the component pack 4.3.0.13

  I solved the problem: I had renamed the library sooner, while the Simulator had two containnig different cod files the same class files. This seems to have led to the problem described. I reinstalled the Simulator and took care that only the current cod files have been deployed in it, and now it works.

• Content on Debug view Simulator

  Using Flash Pro CC so I am controlled the film Simulator is here but if I try to debug it is not , frame Flash, reboot the computer, reset the debug workspace has not set.

  any ideas?

  I created a new Android AIR and works very well if it is related to projects created already, perhaps before the last update CC. I'll try to copy and paste the old stuff of new empty folders to try to solve it.

  UPDATE: the old stuff to copy and paste in the new empty file solves the problem. Thank you very much

• Impossible to debug - conflicts at the level of the API - a newer than IDE device - bad joke?

  Hello

  I am new to this forum and Blackberry, but I develop applications for iOS and Android.

  Unfortunately I'm not able to debug anything, it seems that the IDE is obsolete - or abandoned or...?

  Message from that connection is:
  The API level 10.3.1--> Runtime Version 10.3.2 project

  "Cannot find the corresponding debug symbols", after clicking on "install...". "nothing happens.

  Enter in the update box (API level) and pressing get more, no new items were found.

  So, how can it be, that there are versions, which are not covered by the IDE development? On other manufacturers, it's the other way around, you will be able to test in advance, and here I have to wait until I could test the devices already sold?

  That must have been a bad joke, but maybe I'm not smart enough to find the right button.

  Or did I used the wrong environment and development via Momentics is no longer supported or interrupted?

  If someone managed to use the IDE and be able to debug on 10.3.2 Please give me a hint.

  Thank you.

  Momentics Version: 2.1.2 Build id: 201503050937

  Bond Blackberry device,

  OS 10.3.2.2474

  Take a look at the article below, which has a work around for debugging with 10.3.2.

  Workaround for the error: cannot find in debugging symbols

• Impossible to deploy on Simulator

  Hello-

  I use Eclipse to develop a BlackBerry application. When I try to deploy my application on the Simulator, Simulator is launched, but only the old version of my application is here. A new not to push on. We also tried to push a simulator that does not have an older version of the app, and the app does not appear. I'm lead to believe that something prevents the current version of our deployed application. The problem is that I have not been able to find error messages that indicate what is happening. Someone at - it ideas?

  Kind regards

  Eric

  Hi Eric,.

  Yes, others have posted this question similar forum - try this first and see if you get deployed...

  Right click on the folder of your main project in Eclipse

  Find the menu item "Turn BlackBerry" and make sure it is checked.

  In this case, consult the console window (there may be several console windows so you will need to click the icon for the console to see other consoles.  You want the console to the 'Auditor' window  Check if the auditor is a failure that will prevent the application under construction and therefore it will not deploy (but usually if this is the case your main project folder will be a mistake about it (the red X)).

  Kory

• Impossible to debug the example provided with the SDK projects

  Hey there.
  Just recently I started learning the SDK AE. After reading the first two pages of the Guide to the software development kit, I decided to try to build/debug examples of projects in visual studio.
  I tried with the model project "Skeleton" and with the "Resizer effect" project, but the two I can't seem to make it work.

  I set the environment variable AE_PLUGIN_BUILD_DIR for the correct path, and I also made sure visual studio debug using AfterFX.exe
  However, if I try to launch the visual studio debugging (F5)... nothing happens. After effects opens, but nothing happens after that.

  I checked my output log and... Well well full of messages like:

  
  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\AudioFilters.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\ProjectConverterHost.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\TransmitHost.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\DisplaySurface.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\FLT.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\RG.dll. Cannot find or open the PDB file.
  There are many more of these erros... basically for each DLL in the \Support Files\ folder.

  At the end of my output log, I have the following:

  < 5060 > < AppVers > < 5 > App Version = Version 13.5.1.1x48

  < 5060 > < AppDirs > < 5 > App Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  The executable < 5060 Dir > < AppDirs > < 5 > = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  Resources < 5060 > < AppDirs > < 5 > Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  Package < 5060 > < AppDirs > < 5 > Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  < 5060 > < AppDirs > < 5 > Plugin Dir = C:\Program Files\Adobe\Adobe after effects CC Files\Plug-ins 2015\Support

  < 5060 > < AppDirs > < 5 > required Dir = C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Required

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\aeres1.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): unloaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\aeres1.dll.

  The program ' [3244] AfterFX.exe "ended with code 0 (0x0).

  
  

  
  

  Can someone tell me what I'm missing?

  Well, it is normal that if you launch AE in the debugger, nothing different happens if you launch AE normally. Which means that you must create or load a project and apply your plugin, so you can stop in the debugger (unless you want to catch global initialization, which is made on the loading of the program).

  With regard to the PDB messages in the journal, which is quite ok, as the Adobe dll plugin obviously would not come with debug information.

  The plugins you've compiled are born actually in the correct path? They are available in the menu effects in AE? It is the first thing to check, because when there is not this plugin, debugging is not available :-)

  I interpreted your question so that your .aex files are actually present and visible on EI, you just can't break into the debugger when one of them is used.

  So for your plugin, you must make sure that it contains debug information, otherwise you will not be able to debug.

  Please check the following settings for your project in Visual Studio:

  "C/C++" - "Debug Information Format" value "Program Database"

  "C/C++ - preprocessor"-"Preprocessor Definitions" string contains the "_DEBUG" set

  "C/C++ - Code generation '-'Runtime Library' is defined is ' / MTd ' or ' / MDd" (this is the most common error when unable to debug!)

  ' Linker - debugging - 'generate debugging information' set to 'Yes "".