Impossible to debug javascript

Similar Questions

• Impossible to debug UIWebview with Safari 9.1

  Recently updated to El Capitan 10.11.4, it comes with Safari 9.1. Now, I'm unable to debug UIWebview on iOS Simulator (tested on 9.2 iOS and iOS 8.4. both don't work). In the setting of safari Simulator are as follows. Inspector Web is running, JavaScript is activated. Website fraud warning is DISABLED. In Safari for Mac menu develop appear, the entrance of Simulator appear when the Simulator was launched but only show JSContext. The UIWebview embedded in our application does not appear in the submenu of the Simulator. All the web pages in safari iOS does not appear as well. Is there a setting that I missed? It worked before the upgrade to 10.11.4

  Hello ahuang105,

  If you are a developer, you cannot act as a user.

  This means that you need to test the Apple software throughout each cycle of beta. You need to do this test on a complete ecosystem "burner" - iOS devices, Mac, Apple ID dedicated to the beta test. Along the way, so something that you develop breaks in all of this, you will be able to report a bug to Apple and to develop an alternative solution in case Apple releases with the bug.

  In the same time, another complete ecosystem production - Apple ID, Mac and iOS devices all dedicated development of production - needs to stay on the most recent version has no crippling bugs. For El Capitan, your guess is as good as mine what build that can be. 10.11.3 I guess.

  For now, I suggest to ask in the developer forums if this bug in particular is fixed in 10.11.5. I have seen engineers Apple recommends this build for Simulator in 10.11.4 problems.

• How to debug Javascript side QML?

  Can someone give me some tips on debugging of Javascript inside QML?

  Sometimes things do not work, but no errors appear at all.

  What is a good way to do this?

  You use the new "slog2info" approach to see the log output? I believe that you will see JavaScript errors here as soon as they occur. Have had no trouble with it so far.

• How to debug javascript/qml?

  is there a way to set breakpoints in qml/javascript and debugging code?

  Normally I can SSH to my Nokia N9 will enable developer mode.

  You should also be able to do it on the playbook:

  http://openbbnews.WordPress.com/2011/12/21/devuser-and-1000/

  And then edit files using vi (assuming that QNX vi?).

  I have yet to try this with my playbook, but I'll do that when I start the porting on BB 10 soon.

• First 10.3: Debugging JavaScript in HTML Panel crashes

  Since the upgrade to 10.3 first, we noticed that when you debug with breakpoints in JavaScript HTML panels, when execution reaches the breakpoint, the panel all crashes and recharging.

  We did not have this problem the same panel JavaScript code in the first 9.2 debugging.

  This problem seems to occur on the same lines of script, some other lines of script never make the Panel crash.

  All the tested script lines were simple browser JS, no involved NodeJS.

  I tried the upgrade in my version of the ExtensionManifest element manifest.xml and 5.0 to 6.0 RequiredRuntime element, but nothing helped.

  I've not heard or seen such a problem. Please send me your Panel and tell me where to put breakpoints to see the falls.

• WebCenter Capture - how to debug javascript for import processor

  Javascript for import processor code is server-side.  Therefore, it does not println in the java console.

  How to debug a process of import or of javascript recognition process?

  Thank you

  you will use the standard recorder instead of the println function. as you say, that only works for running javascript on the client side.

  See doc-id 1946012.1 for a good example.

  hope this helps,

  -ryan

• Debugging Javascript in Dreamweaver CC

  Hello

  This certainly sounds like a newbee question but here, it will:

  Say I start a new site. I only have one page so far: a Javascript file. I've name it wawascwipt.js. Nothing else. No HTML5, no CSS3, not nothing.

  I want to be able to debug or check my calculations from my code of wawascwipt.js with some sort of console or debugger.

  How the hell can I do in Dreamweaver CC?

  Thank you.

  Dreamweaver displays syntax in code view javascript errors, but it does not include javascript debugging. There are many development environments that include javascript debugging tools.

  You can use the Firefox plugin firebug for javascript debugging. Chrome also comes with a javascript console. You will find under Tools.

  According to Ken, you need an HTML page to launch the script.

• Debugging Javascript inside JDeveloper 11.1.1.3

  I am trying to intercept method Javascript of ADF listeners of Client calls using Javascript debugging options. I have install JDeveloper, as described in the Oracle JDeveloper 11 G manual. I use Mozilla 3.0.18 for the browser on a Windows XP computer. When I debug the application, Firefox appears. The loading of the page, but the application does not have a break on breakpoints that I know are to be crossed. I get the following error messages in the debugger Javasript tab in the IDE.
  
  "C:\Program Files\Mozilla Firefox\firefox.exe" "file:/C:/Documents and Settings/jbasiago/Application Data/JDeveloper/system11.1.1.3.37.56.60/o.j2ee/drs/WebAppRunner.html" - oraclejsdebugport = 3379
  The debugger is connected to the local process.
  Error: Components.classes['@mozilla.org/privatebrowsing;1 "] is not defined in the file: chrome://foo/content/overlay.js line: 161 and position: 0"
  Error: gPrefService is null in the file: chrome://browser/content/browser.js line: 3724 and position: 0
  Error: Components.classes['@mozilla.org/privatebrowsing;1 "] is not defined in the file: chrome://foo/content/overlay.js line: 312 and position: 0"
  Error: Components.classes['@mozilla.org/privatebrowsing;1 "] is not defined in the file: chrome://foo/content/overlay.js line: 312 and position: 0"
  
  When I put a new breakpoint in Javascript, I get this message in the tab IntegratedWebLogicServer debugging in the IDE.
  
  Cannot set the breakpoint (C:\Projects\ADF-Flex-Poc\ADF-Rack\ViewController\public_html\FlexIntegration.js
  
  Any ideas?

  Hello

  I do that all the time with Firebug in Firefox and it all works well. Note that JavaScript breakpoints must be set on the client side - not the side server.

  Frank

• Impossible to find Javascript on my computer

  I'm on Firefox 38.01.Windows 8.1 and see any Javascript.

  It worked thank you

• Impossible to debug - conflicts at the level of the API - a newer than IDE device - bad joke?

  Hello

  I am new to this forum and Blackberry, but I develop applications for iOS and Android.

  Unfortunately I'm not able to debug anything, it seems that the IDE is obsolete - or abandoned or...?

  Message from that connection is:
  The API level 10.3.1--> Runtime Version 10.3.2 project

  "Cannot find the corresponding debug symbols", after clicking on "install...". "nothing happens.

  Enter in the update box (API level) and pressing get more, no new items were found.

  So, how can it be, that there are versions, which are not covered by the IDE development? On other manufacturers, it's the other way around, you will be able to test in advance, and here I have to wait until I could test the devices already sold?

  That must have been a bad joke, but maybe I'm not smart enough to find the right button.

  Or did I used the wrong environment and development via Momentics is no longer supported or interrupted?

  If someone managed to use the IDE and be able to debug on 10.3.2 Please give me a hint.

  Thank you.

  Momentics Version: 2.1.2 Build id: 201503050937

  Bond Blackberry device,

  OS 10.3.2.2474

  Take a look at the article below, which has a work around for debugging with 10.3.2.

  Workaround for the error: cannot find in debugging symbols

• Impossible to debug on real device

  Hello

  When I try to debug an application on a real device debugging I get an error that a debug file is missing.

  After the tutorial on http://supportforums.blackberry.com/rim/attachments/rim/java_dev@tkb/18/1/How_to_Debug_and_Optimize _... he said that I may receive this error if "the reason why this might happen is that the version of the software on your device does not correspond to the.
  the software version of your Simulator

  I use blackberry curve withDevice software versio 5.0.0.103

  The research unit of the Simulator for OS 5.0.0 it does'nt seem to be a simulator for this version of the software.

  What can I do?

  You must launch the application manually on the device. I don't know why the breakpoints are not recognized. Try to delete the app, reboot the device, the app package, sing, load (debug as)... you can tell that the debugger is attached with success by the lines displayed in the Console view.

• Impossible to debug as - > Blackberry in Eclipse Simulator

  Hello

  I've implemented an application for some time using Eclipse 3.5 and Blackberry plugin version 1.1.2 without a lot of questions, but recently, I was stuck on this one:

  Whenever I try to "Debug slot-> Blackberry Simulator ', Eclipse crashes at 31% saying"delegate launch. " This leaves me in a bad spot for my application debugging. However, I only peut 'run as-> Blackberry Simulator '.

  I tried the new configurations debug with different simulators. I tried to re-intsalling the eclipse + blackberry plugin. I'm still stuck with the same question.

  Can anyone share ideas they might have on it, or suggest how I could resolve this more?

  Thank you

  Jon

  Apparently, it had something to do with the BBDevMgr process running. When I killed this process in windows Task Manager, Eclipse was able to start the Simulator in debug mode. All good now!

• Impossible to debug app due to AccessControllException

  My application uses the PersistanceStore to store an array of strings.

  When you start the application in the normal mode (non-debug), it works fine.

  When you start the application in debugging mode, it tells me that CrossApplication is not possible due to the AccessControllException.

  It seems that the app is not recognized to be the same application when starting in debugging. Reset the same the entire memory as NVWam, SD card and the file system does not solve this problem.

  After reset of all memory, I always get the same exception. Even if, during startup in normal mode, my app tells me that no peristence for this specific key object has been found (if clear memory worked!).

  How to deal with it in debug mode?

  Thank you

  I found a batch/sh file that cleans the directory of simulators (takes 5 min), after that I'm able to debug again. Very strange!

  the file was in eclipse under: eclipse\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.29\components\simulator\clean.bat

• Impossible to debug with 9000 device

  Hi, I develop a little app that I debug in the Simulator and now I wan't to test on a real device.

  I have connected my BB Bold 9000 to the Pc via the USB cable and selected "join" in the JDE.

  Currently, I get lots of messages like "cannot find NET_RIM_APPMANAGER. DEBUG ".

  If I navigate to the directory of Simulator and select this file, then I0ve has received the message "(debugging information Bad C:\program files... \net_rim_appmanager.debug(4873cc83)-net_rim_appmanager (48c06f7e).

  I think the problem is a version mismatch, I downloaded the last Simulator ("version 4.6.0.92 (9000 Telefónica)"), but if I look in my camera in options-> it reads: "Blackberry 9000 (3G, Wi - Fi) V4.6.0.147 (Platform 4.0.0.144)".

  So, how can I get the files of debugging for the version V4.6.0.147 or how can I downgrade my V4.6.0.92 device?

  THX in advance for your help

  Concerning

  Alejandro

  Well, everything is now resolved.

  I found this post explaining that, sometimes, the JDE errors the need for signatures of a code particularly (in may cases, says JDE he needed RBB, but also RRT.) Thus, the .csl file editing and adding 52525400 = RIM API execution it compiles and runs correctly.

  So now that the code is executed, I can debug, even with the missing .debug files.

  Thx for your help, and I hope this can help someone else...

• Impossible to debug in Eclipse

  Hello

  I'm trying to debug an application in a true smart phone BlackBerry. I use Eclipse for a 8703e with OS 4.2.1.110.

  When I run the debug option, he tell me that I lack the net_rim_app_manager.debug file. I saw on the forum I need to navigate to the folder of the Simulator and select the correct file. I tried with all version of Simulator and Eclipse always telling me that I don't have the right file. I've read elsewhere that I need the exact os version of the Simulator, but there is no RIM Web site. I use the 4.1.0.359 version so that the Simulator for the 8703e.

  If I ignore the error message, as I read in another post, debugging starts, but my breakpoints doesn't work.

  What can I do? Any ideas? I really need to debug on the real device, cause all works on the Simulator, but I have problem in the actual device.

  THX

  I found the problem! The version was not quite the same thing (only an IP in a change of HttpConnection) so the debugger do not stop.

  For all the people who have this problem, make sure you have the exact same version of the application installed and use in Eclipse (do not add a space online!).

  Thx for the support