Impossible to delete mutiple audio codecs installed in windows server 2003

Similar Questions

• Which laptop model can be installed in Windows Server 2003 and PIA?

  People,
  
  Hello. The PIA (Weblogic and Tuxedo and SQL Server) and the PeopleTools are compatible with Windows Server 2003 or 2008. But it is not compatible with Windows 7. Because my HP laptop is installed with Windows 7 and can not be installed on Windows Server 2003 or 2008, I need to buy another laptop to install Windows Server 2003 or 2008 PIA and PeopleTools.
  
  I need to know what model of laptop computer can be installed on Windows Server 2003/2008 and double boots several operating systems. Everyone installs Windows Server 2003/2008 and PIA in any laptop? Please tell me the model of the laptop.
  
  Thanks in advance.
  
  Lucy

  Any modern laptop with lots of RAM (> = 4 GB) and hard disk space, within capablities of 64-bit virtualization should be well.
  Even if you have Windows 7 OS to host, you can still install a virtual machine software installable on top of your operating system (for example, VMWare), then install an operating system supported as a virtual machine (called guest operating system). You will work on this virtual machine, exactly as it was a server, waiting for your host what OS is also running, no need to dual-boot.

  Nicolas.

• Install on Windows Server 2003 32-bit OBIEE

  Hi all
  
  I try to install OBIEE on Windows Server 2003. I have installed the Java SDK from here:
  http://Java.Sun.com/javase/downloads/index_jdk5.jsp
  
  Then I set the JAVA_HOME to be D:\Sun\SDK and %JAVA_HOME%\bin we add the path in the system variables.
  There is also a variable user called Administrator PATH with the value D:\Sun\SDK\bin.
  
  When I run Setup OBIEE, I wonder for the location of the JDK (JAVA_HOME), but no matter what I come here, I get the following error:
  "Please specify a location for installation of JDK valid."
  
  I tried D:\Sun\SDK, D:\Sun\SDK\bin and a few others too, but nothing seems to work.
  
  Any ideas would be appreciated.

  Hi Alex,

  Try D:\Sun\SDK\jdk

  Andrej

• Choice of the database for vCenter Server 5 install on Windows Server 2003

  Hi all.

  We have an environment of health care small assisted living with a dozen sites/servers.

  A server has 3 VMw4 vms on it.

  We received two new servers each with ESXi installed 5. They will host several virtual machines of Windows Server for most of the migration of the current VMw4.

  I want to install vCenter Server 5 to manage.

  My book of VMware by Lowe, he mentions that the provided SqlExp08 is fine for 5 guests and 50 virtual machines.

  Us will never get more than that, probably.

  However, the server I want to install vCSrv5 on already has installed some Sql05 and Sql08 in use by other applications.

  These applications will be migrated to our new virtual machines later with their respective db.

  My questions are:

  (1) should I install vCSrv5 and use the provided SqlExp08 and just let it go at that? Should the PB is on another drive or should she be on a different server?

  (2) can I install using an instance of Sql05 or Sql08 that is already installed?

  I'm not sure about the impacts later when I migrate the few applications that currently use Sql05/Sql08.

  I'm not a DBA, but a dedicated database would seem to be the best.

  Do not forget that once our virtual machines installed vCSrv5 probably make much since most of the features are for large environments with multiple virtual machines.

  Any thoughts?

  Thanks in advance.

  The VM 5 host 50 thing is not applied hard.

  If you use the DB delivered, it will be on the same machine as the CV.

  Also a database dedicated to VC is the preferred option.

  Concerning

  Girish

• Remote agent ACS - can I install on windows server 2003 64-bit

  I have Setup tehfor customer 4.2 ACS to authenticate the client wirneless, ACS have to communitate with AD (windows 2003, Enterprise Edition, 64 - bit). Can I install remote agent (ACS 4.2) for ACS ACS can contact the AD to do?

  Please help me.

  Currently we do not support 64 bit OS.

  Kind regards

  ~ JG

  Note the useful messages

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• Impossible to get any OS to install PowerEdge 1750 Server

  I'm having some trouble with that and it makes me nuts. It's the 1st Rackmount Dell I worked on. Other then that I was working on a tower. But the part that I did not do anything with the SCSI hard drives is.

  So maybe someone here can help me. I got a Dell PowerEdge 1750, 2 Maxtor 36 GB SCSI disks in there. The server was using RAID mirror the primary drive before being erased and replaced. So now, the server must be configured with Linux and it does not matter if drivers are reflected in the RAID at all.

  So I tried to install Ubuntu server OS and he repeated to me that it cannot find the drivers for the drives. I tried a few drivers here at DELL who have been to Red Hat and it did not work.

  Then, I tried a copy of Red Hat Linux 8.0 and had the same problem that Ubuntu has given me.

  Then laughing, I tried a copy of Windows XP Home Edition who was sitting by a former Workstation. Same problem, Windows could not find the hard drives. I have download the drivers PERC 4/Di windows server 2000 and 2003 (x 84). Tried loading to see if pilots would allow me to install the OS or not. Never worked.

  Finally try, I popped a copy of Windows Server 2003 R2 Enterprise Edition in and he had the same problem as XP, so I pop the drivers PERC 4/Di and selected the driver for Windows Server 2003 and it has yet to find the hard drives.

  What I am doing wrong?

  NEWS POST:

  Integrated server 1.80 Firmware revision management

  Review from the primary backplane Firmware 1.01

  PowerEdge Expandable RAID Controller BIOS B109 February 18, 2003

  PERC 4/Di Standard FW 4.04

  0 logical drives to the host adapter

  Or logical drives 0 managed by the BIOS

  Broadcom NetXtreme managed by BIOS Boot Agent V7.0.3

  I don't know if this noraml or not, I think that it funny that he finds the 0 logical drives, but when you go into the configuration both appear in there.

  PERC does not support non - RAID JBOD, so if you want mirrored or not, you must configure the drives in the PERC BIOS (CTRL-M)... or put it turns off and only use the system SCSI controller.

  If you want to use as separate readers readers / person, you must configure each disk in a single drive RAID 0.

  If you want to disable RAID and used in SCSI mode only, so you need to start on the configuration of the BIOS (F2), embedded devices, and Embedded RAID SCSI value active.

  The fact that the POST said 0 logical drives found indicates that the disks are not configured - don't forget, readers must be configured in a sort of table before they can be used by the operating system.  So it must show at least a logical drive before installation can never be successful.

  Once the RAID is set up, you will need to worry about drivers.

• Windows Server 2003 detects no audio device

  When I start Windows Server 2003, I hear no sound start. I hear no sound XP, nor do I hear the sound of UK.

  Then, I discovered that volume does not work as well. When I go to start > Control Panel > sounds and Audio devices, it says "no Audio device". There IS an audio device built into the logic board.

  I went through every troubleshooting step and what I see is that I need to get drivers.

  Unfortunately, Windows Server 2003 is an old operating system, and it is almost impossible to find the drivers. When I go to start > administrative tools > computer management > Device Manager, I see one category "Other devices" with a yellow question mark icon. I see 2 devices inside, "On the HD Audio Bus Audio device" and "Base system device". Both have a little yellow warning sign next to them. Double-click any of these two, and he said: 'the drivers for this device are not installed (Code 28)', and when I click on the button to install the driver, it gets stuck in the research or error "cannot install this hardware", said.

  I don't have the disc or Windows recognize even anything on both devices. I also made sure that audio has been enabled in the Services, and that did not work. You have a driver or a fix? Answer as soon as possible!

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer.

• Need driver Audio for Windows server 2003 for the INSPIRON 1545 laptop

  Hi all

  I need Audio and video drivers for my new laptop computer Inspiron 1545 laptop. It now supports drivers for Vista, XP and Windows 7 only.

  I installed Windows server 2003 to install SAP. But I am unable to get the sound.and not able to install video and audio drivers.

  Please help me how to get these drivers.

  Thanks in advance,

  Delphine.

  Delphine,

  This is how it was done before Vista. There could be a better way now.

  1 enable the Windows Audio Service. (This should already be activated in 2003 Standard Edition). For other versions:

  Go to start/run and type "services.msc" and press the 'Enter' key (or click on 'ok'). The Services window appears. Scroll down the page until you find "Windows Audio" to the bottom of the list. Double-click on it and change the type of startup to automatic, and then click Start, apply, then OK.

  2. download and install the Microsoft Windows Server 2003 KB901105 update from this page of Microsoft:

  http://support.Microsoft.com/?kbid=901105

  3. restart.

  4 install the audio driver for Windows XP. If you have trouble to install it using Windows XP compatibility mode.

  5. set the hardware acceleration DirectX:

  Click Start/run and type "dxdiag" and press the 'Enter' key (or click on 'ok'). Go to the Audio tab and move the slider to 'Level of hardware acceleration Sound' at full speed.

  (Thanks to kovacsAtTiLa of a site called west - wind.com.) He posted critical information, the link to the patch from Microsoft).

• Cannot install KB979909 and KB979906 for Windows 2000, Windows Server 2003 and Windows XP

  Original title: Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 security update for Windows 2000, Windows Server 2003 and Windows XP x 86 __Microsoft .NET Framework 1.1 SP1 (KB979909) update for Windows 2000 and Windows XP (KB979906) __KB979909)

  I was warned, I got updates, I clicked on install

  he installed an and failed both

  I can't determine how to solve this problem, and the little shield that warns me still here says I need to update

  the explanation refers to the sp?

  IM unaware of what these elements affect

  See the RESPONSE message in this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/5dc22ff1-ba9a-4a3a-9f19-49e85908c4c9 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Im trying to install Windows Server 2003 R2 optional components

  Im trying to install Windows Server 2003 R2 optional components, but the installation wizard, says "the file 'clusnfs.exe' on Windows Server 2003 R2 is necessary". Can I download it online? I'm just trying to choose the optional component which would allow a computer MAC share files and the printer connected to the server.

  Hello

  As the problem you posted is related to the Windows Server operating system, I suggest that you post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Can I install windows server 2003 on a computer laptop i3/i5 processor Intel?

  I am told that Windows server 2003 is not certified on these processors.

  The reason to install the older Windows OS Server, I want to install Oracle E * Business suite R12 on this machine.

  Oracle E * Business suite R12 is not certified on WIndows server 2005/2007

  Hi NageshMandalik,

  Since your question involves the use of Windows Server 2003, please join the TechNet community for assistance. They specialize in THIS type of environment Pro and will be better suited to help you

  TechNet Forum
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/threads

  Best regards, Ajay

• How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you!

• What is the difference (other than the device/user limit) feature which would prevent me from installing this new software on Small Business Server 2003 R2 SP2, which 'requires' Windows Server 2003 Std Ed & SQL 2005 Std Ed 32bits. ?

  Need to install new software to the main application. Software provider said Windows Server 2003 STD. Ed. (32 bits) and Microsoft SQL Server 2005 32-bit Standard Edition, Cumulative Update package 8 for SQL Server 2005 SP 2, MDAC 2.8 or later.  We have Microsoft Windows Small Business Server 2003 Standard Edition (SP2 R2).

  Software publisher made a special note that 'Microsoft SQL Server sent as part of Small Business Server is not supported. Please contact us for more information about SQL Server Enterprise Edition. "(contradiction?)

  • Small business, fewer than 10 users.
  • Don't use do not Exchange or IIS part included in SBS 2003.
  • I have access to install SQL 2005 Std install/replace on Small Business SERVER 2003

  Hi copenetadmin5,

  Thank you for visiting Microsoft Answers. SQL Forum, I think, would be the best place where you can discuss much more on the above query. Please visit the link below to find a community that will provide the support you want.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  Nice day.

• Install RDCman 2.2 the use Remote Desktop on windows server 2003 fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  CAN ANYONE HELP?

  Hi Mordi26:

  This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:

  http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en