Impossible to deploy the Jdeveloper to Weblogic application!

Similar Questions

• Please help me on the jdeveloper to weblogic application deployment

  At the beginning I just thought after developing an adf application then just deploy as an .ear file and deploy it in the weblogic console and everything will be ok. But actually I had a lot of problems. Then I had a tutorial for it and I do what he says step by step, but some new problems occurred. This is the tutorial I mentioned: [how-to: ADF Deployment Guide | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.htm]
  
  Now, could someone tell how did deploy your adf application?
  
  Here are the errors I got.
  
  It's the packege of installation and the operating system I use:
  1. 6.3_x64 + jdeveloper11123.jar(include wls10.3.5) + adr centOS (the package name is ofm_appdev_generic_11.1.1.6.0_disk1_1of1.zip) [and earlier, I used a solaris11 of oracle vm and install jdeveloper11.1.2.3, the same probem occurred as CentOS.]
  2 Win7_x64 + jdeveoper11123.exe(include wls10.3.5) + adr mentioned above
  
  Here are the problems I get:
  in case 1, after that I installed the jdeveloper (using the sun jdk 1.7), the weblogic seems to be fine but I na not configure a domain. But after I opened a
  request (which I get from the oracle jdeveloper tutorial demo, which works well in my Win7 env) and I run it, the integrated weblogic can not get
  has started. First in the console it says identifier jrocket - is not recognized, then I edit the setDomainEnv.sh and the startWebLogic.sh file in the
  integrated wls area (that of the Director of .jdeveloper) to assign to the variable JAVA_VM - server. After that another problem emerged: when the
  WLS goes to the 'start-up' status, it is blocked and I turn to System Monitor shows only a thread of java using more than 1 GB of memory in my system
  and occupy 150% of my cpu (it's a dual-core computer). I wait about 5 minutes, when an error came up said "PermSize is too small".so I change the
  setDomainEnv.sh file to set the PermSize be 1024 m and MaxPermSize to 2048. (the name of the variable is something like that, maybe not the)
  exactly on time. "I think you can understand that one is). But the problem is still there.
  
  then in 2 cases in the first place the jdev and integrated wls works fine, but when I deploy an application that works well in one ear of the file, and then deploy it to a
  WLS (10.3.5) autonomous it never Works.the dumb mistake is something libraries of reference/dependencies was not found. Then I tried again a server connection to
  the autonomous wls and I got the tutorial [how_to_deploy_adf | http://www.oracle.com/webfolder/technetwork/jdeveloper/howto/11114/managedserver/wlsadfms.html], as the tutorial says I my standalone patch
  WLS with adr and everything is fine, no error reported. Then I tried the new server in the new slot machine the adminserver management and apply the
  the ADF model in him will overload / console em. But after I restarted the new server (by the console, and then by file stop + startweblogic.bat) the server is running
  the application in the new server is just 'not available '. I tried for three times in three computer, two of them are running win7, it runs Windows XP.
  
  I don't know what the problem is and I'm quite a beginner on this subject. Someone help me please. Thank you very much!
  
  respect, Neo.

  Neo,
  There are a few problems. First of all, jdev comes with its own jdk provided in the product (jdk 1.6_x). The next thing is that if you use JDev 11.1.2.3.0 to build an application you must use a wls 10.3.5 and 10.3.6 where you need to install the appropriate on runtime. In your case, you first install adf runtime 11.1.1.6.0 and then you need to install two patches that update the adf to 11.1.2.3.0 life. These husks are only available through support.oracle.com, which means that you need a support contract to get.
  More information you can find in my blog http://tompeez.wordpress.com/2011/09/14/jdeveloper-versions-vs-weblogic-server-versions/
  The rest of your problems disappear once you have installed the adf right on your server runtime.

  Timo

• Impossible to deploy the application

  Hi all

  I'm having the following problem:

  I have an app, but it has a bug in it, that I'm chasing. The bug causes the app to not close properly (if the icon is grayed out). Once the icon is grayed out I can't even deploy the app without having to reboot. Even uninstall the app is not solve this problem. The message is:

  Failure of deployment: Info: request shipment: launch
  Info: Action: launch
  News: Native debugging: on
  Info: Launch of com.example.FixIt.testDev_ample_FixItdd6a40cf...
  result::invalid
  Info: done

  It is a huge frustration and cost far too much time. Any suggestions/ideas (I know - correct this bug would be ideal, but this problem has struck me before that the bug has been introduced).

  Thank you

  Gerry

  It is possible to this post, or others in this thread, will help you to avoid having to restart: http://supportforums.blackberry.com/t5/Cascades-Development/Beta-4-WebView-app-freeze-post-exit/m-p/...

• Having the problem with 'Deploy the SRDemo on WebLogic servers' - Shay Shmeltzer

  Hello:
  I read "Deployment SRDemo ADF Sample Application on WebLogic servers" written by Shay Shmeltzer
  
  in the link: http://www.oracle.com/technology/products/jdev/howtos/weblogic/deployingwls.html
  
  I followed the step in the file: but I can not find the 'SRDemoWebLogic.deploy '.
  
  
  Please help me, thank you very much.
  
  Shay Shmeltzer:can you help me? Thank you.

  Make sure you use the correct version of the SRDemo ADF BC application.
  You can get it here:
  http://download.Oracle.com/OTN/Java/JDeveloper/1013/extensions/SRDemoSampleADFBCExtension.zip

• How to deploy the business on Oracle Application Server rule

  OPA dear team,
  
  
  We have a requirement in which we integrate the OPA with BPEL. We must define the rules of modeling tool Oracle policy and deploy it in Oracle Application Server.We will then that wsdl and call the rule of BPEL partner links engine. By default the Oracle Policy modeling tool deploys for tomcat. Ask your input about how we can deploy on oracle application server.
  
  Thank you
  Anand

  bwolff wrote:

  So my question is how to deploy a rulebase.zip a determination server that runs on Oracle Weblogic Server 11g?

  Thank you
  Brian

  Normally, an application server will expand the war for the web application file works from the expanded location. When this is the case, you can deploy a new one simply by copying the module zip file in the directory WEB-INF/classes/rulebases .

  However, Weblogic is not extend the web application, there is no directory to copy the file zip of modules on.

  It is possible to run the determinations under weblogic server so that you can deploy a new modules without restarting the server of determinations. There are two technqiues to achieve this.

  1. you can manually unzip the .war file somewhere that the weblogic server can see locally and then deploy the .war file expanded as the determinations server web app. If you do that you can deploy a new modules by copying the zip file in the directory WEB-INF/classes/rulebases to this place.

  2. it is possible to specify a rulebases directory that is not in the web application. In this case, it should be a place the web application can be done locally. You can deploy a new modules by copying the rulebase.zip file to the location specified modules.

  You specify a different directory to search rulebases by setting a java system property: determinations.server.rulebase.dir.

  Example of

  -Ddeterminations.server.rulebase.dir=/some/other/dir/rulebases
  

• Ipa for iPhone CS5 is ok, but impossible to deploy the CS5.5-AIR 2.7... Please help!

  Hi, guys, I had success use CS5 to release a

  n app on the Apple store. Now upgrade to CS5.5, I use the trial home version and

  full version at the office to deploy my application on my iPod touch, it cannot be deployed

  for her, no error message, just see when iTunes show "Determing.

  for sync apps"and the app sync enabled box is not checked. I try to uninstall

  Flash CS5.5 and Air 2.7 l.  Restart and re - install in a folder "Adobe2" and overlap AIR 2.7.

  still do not work, does anyone know or ideas to fix this...

  Something else to help you achieve, you will not be able to use CS5.5 update the application you already in the App Store. Apple rules prohibit you to drop support for a device when you perform an update. You can use CS5.5 for the manufacture of new applications to submit, but you do have to use CS5 (or PFI from the command line) during updates of the existing application.

• Dell Optiplex 3040 MT - in the BIOS there is no option to select "ATA" for SATA Operation! (Impossible to deploy the Image system Windows 2008 Server in AHCI Mode)

  Dear Experts,

  I am unable to find the "ATA" option in dell optiplex 3040mt. where might not deploy top Windows Server 2008 image.
  In dell 3020 I deploy the image using ATA mode.
   
  Please tell us how to activate the "ATA" option in Optiplex 3040 and install windows server 2008.

  Thank you!

  Jesse There is no option in 3040 because the ATA mode is no longer supported.  F6 drivers are REQUIRED for windows 7, 8 or 10.   XP/VISTA is not supported at all and will not be installed.

  AHCI is the only option available in the modern Bios and chipsets.

  The INTEL RST F6 drivers are REQUIRED for all advanced sector format 4 k drives. Most of all the readers

  https://Downloadcenter.Intel.com/download/25165/

  

• Impossible to deploy the unit VR (SRM 5.1)

  Hi all

  I need help.

  I install SRM 5.1 on a new site with the following specifications:

  2 * 5.1 ESXi hosts (build 799733) and a vCenter 5.1 (build 880146).

  After matching sites, I'm trying to deploy the VR of the plugin of SRM device. the error I get is:

  The OVF package uses features that are not supported.

  Line 157: unsupported section ' {http://www.vmware.com/schema/ovf} vServiceDependencySection' (Extension of vCenter vService dependence).

  When I looked, I found that the '"Managed IP address' and 'the vCenter server name' values (under settings-> run settings vcenter), both must be filled, but I filled before the attempt to deploy.

  so... What can I do?

  Hello

  Could you please make sure that 'VMware VirtualCenter Management Web services' service is started?

• Impossible to deploy the model after upgrading to vCenter v4_1

  Hi all

  I updated vCenter Server from version 4.0 to v4.1 and re-registers the hosts.
  Virtual machines are working well and are able to collect data on performance.

  However, when I tried to deploy the model, error occurred and failed to deploy the model.

  (This model were made to vCenter v4.0 environment, before moving on to vCenter v4.1).

  My client needs deploy the model so that it can create a new server next week...

  I looked to the top of the Knowledge Base and found the following information.

  ----------------------------------------------------

  Knockout No. 1036224
  VMware KB after upgrading to vCenter Server 4_0 to 4_1, deployment of a model with a comments customization fails

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1036224 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 321118019 & StateID = 1 0 321114529

  ----------------------------------------------------

  If there is anyone who has solved this problem by following the procedures written in this KB, could you tell me at what level you updated VMware tools for?
  In addition, was the update of the virtual hardware to solve this problem?
  (I hope that the material of the VM is v7, which is the last for ESXv.4.0, update the virtual hardware is not required in my environment :)

  Thanks for you information in advance!

  
  < environment >
  Before the upgrade: vCenter Server * v4.0*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware,.
  After upgrade: vCenter Server * v4.1*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware
  (I've specifically updated only the vCenter server and ESX and VM(Windows/Linux) are not updated).

  Hello

  Try to convert the template to a virtual machine, then new - VM model.

  Sounds strange, but it works for us

• Impossible to deploy the application, integrated WLS seems to be stuck

  Hello
  
  I'm able to run my application in JDEV 11 G 11.1.1.6
  In fact, I deleted my domain name so that it would create a new.
  
  Before I was running well, but tight now I have problems running my application.
  I have a problem running even a simple page with a Hello World output text.
  
  My internal Weblogic just pause on this line.

  <Mar 9, 2012 5:11:47 PM CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode> 
  <Mar 9, 2012 5:11:47 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> 
  <Mar 9, 2012 5:11:47 PM CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> 

  He's not even trying to deploy my application. :(
  
  I also notice that when I try to end my weblogic.
  It will just come out.

  Process exited.

  He does not even try to do a cleaning when unloading...
  
  Hmm... I think that somehow my weblogic is stuck on a breakpoint but I had turned off all the breakpoint in the
  Display the breakpoints.
  
  No matter who is this and how to fix this error.
  
  Thank you

  @Timo: he just read through the lines and missed this part :).

  @Neliel, after the server starts, you can try killing him (from task manager kill java.exe) and then try to run the page to see if the server is started and the app gets deployed very well (destination of JDeveloper).

  Arun-

• Impossible to deploy the Application of MAF

  Hi Please help me in this issue:

  [11:31:25] Server Android Debug bridge closure...

  [11:31:25] undeployment.

  [11:31:25] - incomplete deployment .

  [11:31:25] illegal character in the path to the index 12: file:/E:/MAF projects/DATA Visualization/deploy/Android1/java_res/assets/jvm/lib/cvm.properties

  Environment: Jdev 12.1.3 / Windows 7

  I deleted deploy before the folder deploy too, but I get this error again...

  Hello

  You can remove the spaces of the trail to deploy folder (/ E:/MAF projects / DATA Visualization/deployment). Remove the spaces to projects of the MAF and visualization of DATA in MAFProjects and DATAVisualization, then try to deploy it.

  Kind regards

  Véronique

• Substitute the value of weblogic - application.xml at startup?

  Is it possible to override a value in an application.xml file - weblogic by specifying it on the command line? I need to start an ear in two different instances, but need to have one of them uses a different cookie name of session handle. The ear is big enough, so I don't want to duplicate and deploy separately to change just that one value. Any suggestions?

  Hello

  Try to use the 'plan '.

  Thank you.

  Naour Vijay.

• Impossible to deploy the rules posted in HFM

  I'm trying to convert my rules based on scripts at Calc Manager in HFM 11.1.2.3.502. I can load the rules by type and validate them successfully, but when I checked, and you try to deploy, I get the following error:

  "Objects of consolidation can be deployed.

  Is there a switch to reverse that will allow me to use the Calc Manager or some other configuration that I'm missing?

  Do not have many selected item. The menu in the upper part applies to any selected item in the UI (which here is not valid). To only have selected the application node or right-click on the application node and you should see a deployment option.

  Sree-

• Deploy the Web service client application

  I built a webservice client in FB3. It works very well in FB3. I can also run by referring to the SWF directly in the file
  Directory - bin-debug (not in the FB3) and it works very well also.
  
  Now, I copied the directory bin-debug outside the workspace of FB3 and evokes the swf file. "This time I got errors when accessing the webservice server:"Error of security to access the url"faultCode ="Channel.Security.Error"faultDetail =" Destination: DefaultHTTP '...
  
  Why I run the swf file when it is in the FB3 workspace and can't when it is out of the workspace?
  
  Also, I did the Release version and run the swf file in the bin-release directory. He gave me the same error messages when I ran in FB3.
  
  Am I missing some configurations?
  

  FlexBuilder installed in a trusted location. It can access anything whatsoever. That's nice for development, but cause a lot of grief the first time you deploy an application.

  This crossdomain isn't enough for FP9, especailly with WebService. There are several other parameters need to be defined. Here's what I have:
  
  http://www.Macromedia.com/XML/DTDs/cross-domain-policy.DTD">
  
  
  
  
  
  

  Tracy

• Impossible to deploy the database of NOR-XNET to target RT PC

  Hello

  I am trying to deploy a XNET database to a target RT PC simply by following the tutorial here: http://digital.ni.com/public.nsf/allkb/9847EF6F2D867BC186257DCE00626236

  However, when I click on deploy nothing happens; I get no error message and the database alias does not appear as present in the aim of RT (the entire list is empty for the RT target). If I run my code, he complains about the database not being is not present, so I don't know that it isn't here.

  I checked with Max OR and target a NI-XNET 1.6.0 installed. I'm using LabVIEW 2015. I have no problem connecting to the target. I tried an another new database created with LabVIEW 2015, without going. I tried to disable the Windows Firewall as suggested in a similar position (http://forums.ni.com/t5/Automotive-and-Embedded-Networks/Unable-to-deploy-NI-XNET-Database-to-RT-Tar...), but that no longer works.

  Help!

  Thank you

  Hello

  It seems that I have the latest version of XNET on my target and the crowd at the beginning, but just to try something I did the following:

  • I have reinstalled XNET on the target using NOR-MAX. I had to uninstall dependency package "nor-xnet for NI-CAN compatibility library", before doing this.
  • I have uninstalled and installed the last XNET on target as well.

  After that, things worked!

  Thank you