Impossible to detect all the graphics processors after the CC 2015.1

Similar Questions

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• Is there a way to detect all the keys that the user clicked in AS3?

  Hi all

  Quick question - is there a way to detect all the keys that the user clicked using the AS3 code? I have pimples on my project and I want to that they be disabled once the user has clicked on it, but I wonder if there is a function that I can write that will automatically disable all keys that the user clicked once?

  Thank you!

  Here is an example where the buttons share the same handler... try it and see if it works (I can't due to not having Flash on hand).  The only problem that I could expect it not to love the evt.currentTarget is not identifiable as a particular class type, but sometimes it can't.  If this is the case there is an easy solution.

  Btn1.addEventListener (MouseEvent.CLICK, processBtnClick);

  btn2.addEventListener (MouseEvent.CLICK, processBtnClick);

  function processBtnClick(evt:MouseEvent):void {}

  evt.currentTarget.removeEventListener (MouseEvent.CLICK, processBtnClick)

  }

  If you also want to keep track of which buttons were clicked already you can store in an array...

  var clickedButtons:Array = new Array();

  Btn1.addEventListener (MouseEvent.CLICK, processBtnClick);

  btn2.addEventListener (MouseEvent.CLICK, processBtnClick);

  function processBtnClick(evt:MouseEvent):void {}

  evt.currentTarget.removeEventListener (MouseEvent.CLICK, processBtnClick)

  clickedButtons.push (evt.currentTarget)

  }

• Impossible to find all the drivers XP for Satellite Pro P200-15W

  Hello everyone.

  I just installed XP Professional and now I have problems with some drivers. The laptop is a Satellite Pro P200 15W and the drivers are:

  Graphics card (specification says that it is an Ati Mobility Radeon HD2600, and I have not found the pilot)
  Wireless card (both pilots in the toshiba download page don't work)
  Audio device on Bus Audio High Definition (I installed the audio driver, but after that, appears this 'new' device)

  In addition, it appears an unknown device and I have no idea on what it can be

  I searched many forums and pages, and everything I've tried has failed.

  Can someone help me?

  Best regards and thank you

  Wait a minute of traditional knowledge. You confused me completely. All the drivers, tools and utilities are available on the download page of Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Sorry, but I must ask you something: what exactly is your problem? As you can see he is also classified document called Instructions of facilities. All you need to do is install it using the order of good facilities. Have you ever done this?

  BTW: Have you installed WXP including SP2?

• Impossible to pass all the apps that require a connection

  I had this problem since the summer power on and off: as soon I to connect to update an application, the app store fails. My connection is fine and the update process starts, but closes unexpectedly after about 30 seconds telling me that I have to go to the "items purchased" (note to Apple the German translation is bad). Of course, even when I switch to the pane of purchases the problem persists. The same problem exists when trying to install all new elements it, even for free.

  Initially, I had this problem with XCode 7. I spent over an hour with telephone support from Apple to try to correct this there included removing and running traces. They let fall the ball for several weeks and when I get back in touch they had no solutlon. At some point in October, the seeming problem to resolve itself but reappeared since then and currently preventing me from updating to OS X 10.11.

  I enabled debug for the app store and tried the different options all to nothing does not. I don't see anything special except for "storedownloadd (488) deny/dev read-data file.

  Has anyone experienced something similar and managed to fix it?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Updated Garageband for Mac - impossible to find all the Apple Loops loops

  Hi, a few days I've updated Garageband for Mac. Assume that coming up with 2600 apple loops and allows for live lines to use.

  After the update, Apple Loops the loop browser said I don't have that approximately 1900 ++ loops. Where are the loops? Not sure I missed all the steps.

  Please notify. Thank you

  See this discussion: Re: New loops for 10.1.1 even as new loops of Logic?

  Have you downloaded the new loops and sounds using the command from the menu bar main GarageBand ' GarageBand > SoundLibrary > download all sounds available?

• Photosmart 4385: Photosmart C4385 - impossible to get all the functions work in Windows x 64 10

  Everything was fine in Win7 x 64 until the upgrade. After several attempts of uninstalling and reinstalling the software at least I feel funtions, no scanning however. The wizard keeps sending me an all in one package that starts to install, then disappears to halfway through the installation. the package has been 140_408-5. Something new or more compatible? Very frustrating.

  I tried all these things except the hidden admin ACCT. FYI, I finally got this thing to install, and here's how I did it. I used WinRAR to uncomress the .exe wrapper in a separate folder.  I then ran the setup .exe to the root and it first uninstalled everything. I then restarted it and installed all the drivers, the center of solutions etc. Single file across the package with a date of creation other then 2012 and prior was the files in the setup file dated 2014. Obviously something is wrong with the envelope of the installation program.

• HP 15-r254nu: impossible to install all the drivers on my 15-r254nu (L5Z39EA)

  Hello. I am not able to install about half of the drivers for the HP 15 - r254nu (L5Z39EA). After you have installed the chipset, it appeared that it was successful, but I still have a lot of exclamation points in device for various things Manager.

  The only correctly installed drivers were the Realtek Audio Realtek LAN ones. When you try to install the wireless driver I get the message "the device may not be present or may have been ejected disabling the hp system.

  This new laptop is quite good one atm of mess that everything appears in the yellow exclamation points.

  The pilots have been uploaded here: http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7729219#Z7_30...

  I'm sure I'm on the right page, right?

  The BONE in which I tried to install all the drivers is Enterprise 8.1 Windows 64-bit.  I really hope that it is not caused by some kind of hardware problem.

  You are the very welcome.

  No, I think that you are with do not install the driver chipset since a newer version is already installed.

  Give this one a try...

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_140598_1

• Impossible to detect all devices Bluetooth for DELL XPS M1530 but shown as works fine

  My Dell XPS M1530 laptop running Windows Vista Home Premium SP2 32-bit. 2 days ago the bluetooth module could not detect all BT devices at all. I had been using a Dell BT travel mouse for 2 years now n it cannot be detected. It is the same for all the other BT devices I turn on. The sign of BT device on the status bar indicates that BT works well, but my other BT devices cannot detect the laptop, mouse. I read something on the net about the Office 2007 updates causes this problem. I tried uninstalling the WIDCOMM software n put it back in place, but nothing seems to work. I'm running true n of Windows Office 2007. Pls help thanks!

  Hi Hellfire190,

  Make sure that Windows is configured to accept incoming Bluetooth connections.

  Step 1
  You can check the compatible devices Bluetooth configuration panel. Here's how:

  1. Click the Start button, select Control Panel, click hardware and sound, and then click Bluetooth devices.
  2. Click the Options tab, select the allow the devices to connect to this computer check box, and then click OK.

  If this step does not help, try the next step.

  Step 2

  Remove and then reinstall the device:

  1. click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  2 Select the device that is not working, and then click Remove.

  3. click on Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  4. If the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  5. follow the remaining instructions in the wizard.

  ·         Make sure that the device is on and that the batteries should be replaced.

  ·         Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• GREP with lookaround: impossible to find all the "." with the exception of the end of the paragraph

  Hi all

  I'm actually build an expression grep to run in an InDesign document to find all the '. '. (full stop) without any whitespace that follows, except those standing at the end of a paragraph. My approach:

  \. (?! \s) (?! $)

  For some reason any '$' does not work when it is used as a negative lookahead. In the following example, only the first '. ' is found.

  test. test.test.test.

  Not used as anticipation as here...

  \. (?! \s) [^$]

  
  

  It works very well. But unfortunately I am I need the search for only the "." is divided as a result.

  I would appreciate any advice.

  Thank you very much!

  Jan

  This grep finds all the "." without space after except the one at the end of the paragraph

  (?<>

• Impossible to stop all the services of oracle R12 applications

  Hi experts,
  
  I installed oracle apps R12 on RHEL 5.2 box. and all is well wait you I can't access forms in mozilla firefox
  as he throws the java exception.
  
  but I even allow to stop all application services as I nee to restart my machine... I ran the $INST_HOMe/apps/PROD_appsserver/admin/scripts/adstpall.sh script and after:
  

  Enter the APPS password: 
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adapcctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adapcctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoacorectl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoacorectl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adformsctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adformsctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoafmctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adoafmctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adalnctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adalnctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adcmctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adcmctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/jtffmctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/jtffmctl.sh stop -nopromptmsg
  ****************************************************
  
  
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop
  script returned:
  ****************************************************
  ERROR : 
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop -nopromptmsg
  ****************************************************
  
  
  
  adstpall.sh:Exiting with status 8
  
  adstpall.sh: check the logfile /oracle/PROD/inst/apps/PROD_appsserver/logs/appl/admin/log/adstpall.log for more information ...  

  When I checked the log file that has been the result
  

  ........
  Executing service control script:
  /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop
  Timeout specified in context file: 100 second(s)
  
  RC-50208: Exception  in method TimedProcessProcess.run
  Raised by oracle.apps.ad.util.TimedProcess$TimedProcessProcess: java.io.IOException: java.io.IOException: /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh: cannot execute
  script returned:
  ****************************************************
  ERROR :
  Exception in TimedProcess...Failed to  execute command = /oracle/PROD/inst/apps/PROD_appsserver/admin/scripts/adopmnctl.sh stop -nopromptmsg
  ****************************************************
  
  
  
  [Service Control Execution Report]
  The report format is:
    <Service Group>            <Service>                                   <Script>         <Status>
  
    Web Entry Point Services   Oracle HTTP Server PROD_appsserver          adapcctl.sh      Failed
    Web Application Services   OACORE OC4J Instance PROD_appsserver        adoacorectl.sh   Failed
    Web Application Services   FORMS OC4J Instance PROD_appsserver         adformsctl.sh    Failed
    Web Application Services   OAFM OC4J Instance PROD_appsserver          adoafmctl.sh     Failed
    Batch Processing Services  OracleTNSListenerAPPS_PROD_appsserver       adalnctl.sh      Failed
    Batch Processing Services  OracleConcMgrPROD_appsserver                adcmctl.sh       Failed
    Batch Processing Services  Oracle ICSM PROD_appsserver                 ieoicsm.sh       Disabled
    Batch Processing Services  Oracle Fulfillment Server PROD_appsserver   jtffmctl.sh      Failed
    Other Service Group        OracleFormsServer-Forms PROD_appsserver     adformsrvctl.sh  Disabled
    Other Service Group        Oracle Metrics Client PROD_appsserver       adfmcctl.sh      Disabled
    Other Service Group        Oracle Metrics Server PROD_appsserver       adfmsctl.sh      Disabled
    Other Service Group        Oracle MWA Service PROD_appsserver          mwactlwrpr.sh    Disabled
    Root Service Group         Oracle Process Manager for PROD_appsserver  adopmnctl.sh     Failed
  
  
  ServiceControl is exiting with status 8

  How can I check the status of all services?
  
  any help will be appreciated
  
  Thanks and greetings
  VD

  Hello

  but I'm a new plan for oracle apps... can you please guide me on how to run the automatic configuration to stop all the services?

  You must run the script of adautocfg.sh under the INST_TOP/admin/scripts directory $.

  Note: 387859.1 - AutoConfig helps manage system Configurations in Oracle E-Business Suite Release 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=387859.1

  Kind regards
  Hussein

• My cd Tower driver does not detect a particular cd alone... it detects all the other CD

  Hello my laptop driver has not detected a particular cd alone... it detects all other CD... How to get rid of this problem

  You probably can't fix it.  It's probably a damaged CD unreadable.

• Impossible to reinstall all the programs Cloud

  My windows 8 computer had to do a restore, it didn't even give me a choice. It corrupted my install Adobe on the cloud.
  I tried to reinstall the application manager, but every time I go to download say first or any other adobe program of cloud that nothing happens at all. He used to work but now does not.
  I installed the application of adobe support and all I got was that it was a mistake to start strap and restart my pc. If it does not then delete the inprogress registry.
  Current key did not yet exist.
  I don't understand why it will not reinstall.

  I tried the adobe cleaner, it says there are errors, I can not even find the log file now.

  Help is appreciated.
  Thank you

  I could solve this problem. When you use the vacuum cleaner I choose clean all the. Evidenlty you must have all of the programs mentioned to use this feature.
  When I selected clean each one program it worked well all right.

• After debugging problem impossible to download all the games online in my office.

  I can't open a new online games installed in my office that this problem starts when debugging appeared in my office. It is said like this:

  I have set the debugging by just going to tools, options, internet + advance + turn off debugging. Am I wrong?

  but there is always one:

  ERROR:
  WRUPDATER: Access denied p1_0_55_sub2.zip.

  my pc have the problem or the game...? all online games, I tried to download does not work.

  Hi khirenmaya,
   
  Have you downloaded the games from a particular Web site?
  Have you tried downloading from another source and see if that helps?
  What games did not run after installation?
   
  In the meantime, you can perform the following steps to determine where the problem lies.
   
  Step 1: Try to disable antivirus, firewall and other security software installed on the computer and check if you are able to play these games. If you can not then make sure allow all those who you have disabled.

  Step 2:

  Uninstall and reinstall the game.

  Check if the problem persists.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to find all the VM files after changing the esxi4 HDD esxi5

  Hi all

  I have a problem and you need help someone here.  I have an esxi4 with some VM guest OS inside and works without problem, after I detach the esxi4 host harddrive to a new host esxi5.  I can't not find any data file or vmdk in esxi5 under my vSphere client hosting.  Then I checked the disk space has been used but no file inside?  Same result even I update the vmfs3 to vmfs5 data store.  What's wrong???

  Help, please

  NG Man

  Welcome to the community,

  Please provide more details.

  • do you see the disc moved under Configuration-> storage-> vmhbaXX adapters?
  • the datatsore dies it see the place in the Configuration-> storage?
  • make data stores (old and new) have different names - the same name could cause problems!
  • you see any folder or files when you 'old' data store using the browser to store data of pen?

  Same result even I update the data vmfs3 to vmfs5 store

  If there are any questions, it is not a good idea to make major changes without knowing the cause of the problem!

  André