Impossible to download LabVIEW OR SoftMotion Module 2011 SP1

Similar Questions

• SoftMotion module only runs under 32-bit labview and not 64-bit labview

  Good day everyone,

  I downloaded the softmotion module for my Labview 2013 64 bit but when I try to create a new set of solidworks there is no option for this.

  But when I installed the 32-bit version of Labview 2013 I could see the possibility of creating a new set of solidworks.

  Why can I not see the option for the Labview 2013 64 bit?

  P.S. I am using Solidworks 2014 64 bit Premium.

  Thank you

  This is the 64-bit

  

  This is the 32-bit

  

  The softmotion module is not supported for 64-bit LabVIEW.  You can see what we support in the link below.

  http://www.NI.com/white-paper/10383/en/

• Problem installing module time real LabVIEW 2011 SP1

  Hi, I'm new here. I have a problem when I tried to install LabVIEW Real - Time 2011 SP1. Whenever the part of initialization, this message appears: "NEITHER Labview 2011 SP1 32-nit must be installed before installing the OR labview 2011 SP1 real-time Module.» I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well. I use a Windows7 OS and also have Labview 2010 and an older version of Labview 2010 RT module installed. I didn't remove the old version of the software, and I don't know if it is related to this problem.

  Can anyone help? Thank you in advance!

  MrSun87 wrote:

  ... I'm sure that I've already installed Labview 2011 32-bit SP1 and it works well...

  Can post you a screenshot of MAX where are installed Versions of LabVIEW?

  Christian

• Need link to download LabVIEW 2011 Windows 32-bit SP1

  I looked up the link to download LabVIEW 2011 SP1 32-bit Windows for an hour.  I thought it might be incorporated in the version SP1f2.  Nope. SP1f1 version. Nope.  Research of ni.com do not, Google does not find it, I'm stuck.

  How about this?

  LabVIEW 2011 SP1 (32-bit)

• Just LabVIEW 2012. Why am I being asked to download LabVIEW 2011 SP1 f2 RTE Patch?

  Hello

  Recently, I got a new machine (clean install of Windows 8) and installed LabVIEW 2012, with no other previous versions. However, when I ran the Service OR day, he registered "LabVIEW 2011 SP1 f2 R(32-bit) Run-Time Engine Patch" as an update is critical.

  I'm confused; I accidentally installed LV 2011 too?

  Thank you

  No, you did nothing wrong.  time engine run freely installed with LabVIEW 2012 to record for previous versions.  Install the patch.

• Ask for a link for Labview 2011 SP1

  I ask for the link to download the Labview 2011 SP1.

  I have a bug that corrects SP1 (damaged Panel before, cannot open vi, see the discussion http://forums.ni.com/t5/LabVIEW/LabVIEW-load-error-code-3-Could-not-load-front-panel/td-p/1895379/pa...), but the download link disappeared.

  Please, if anyone knows tell me the link to download (32 bit).

  I found it here

  http://download.NI.com/support/softlib/LabVIEW/labview_development_system/2011%20SP1/

  Anyway, there are a few problems with the link that you gave to me. I thank you all the same because what is happening is somethink wronk with national instruments site, which is not the same for all countries (web designers should check and fix the bug).

• Impossible to download and update the app on the iPhone 6 Plus

  Topic: impossible to download and update the app on my iPhone 6 Plus

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Impossible to download on appstore

  Hello

  I've updated recently for iOS version 9.2.1 on my ipad 3 and since then I'm not able to download apps. He tries just to download and finally nothing happens. When I try to restart my ipad, I see a prompt "impossible to buy. The "Apps" could not be downloaded right now. Please try again later. »

  I was able to download the same apps in the past, but now impossible to download or update. Help, please.

  Kind regards

  Malou

  Hi reetasukumaran,

  If you receive a message that the apps could not be download and to try again later, then it may be a problem connecting to the iTunes Store.

  If you cannot connect to the iTunes Store - Apple Support

  Please see the sections, "before you begin" and "on your iPhone, iPad or iPod touch.

  Then, if necessary:

  To learn more

  If the steps above do not resolve your problem, and you will see a specific error message, make sure that it is not recognized as a possible error from iTunes Store.

  If there is still a problem, get more help.

  Take care

• LabVIEW Touch Panel Module | ActiveX controls | Windows CE

  Hello

  I am trying to determine if it is possible to use with the LabVIEW Touch Panel Module ActiveX controls.

  There is no ActiveX container on the pallet in the Touch Panel Module and I can't find any mention of ActiveX controls in the manual of touch panel.  So, I'm gathering that ActiveX is NOT supported on LabVIEW Touch Panel running on Windows Embedded CE.

  Can anyone confirm if the ActiveX controls are supported on the LabVIEW Touch Panel Module?

  Thank you

  Steve

  Hi, unfortunately they are not (see this link). For more information, see the Manualand the listof the supported features.

• Download LabVIEW 7.1

  Hi I want to download labview 7.1. My company has a serial number for 8.6.1 and fewer versions. I checked on ni.com, but only the latest version can be downloaded.

  TNX in advance.

  LV 7.1 was large.

  Contact your local office of NOR.  They will be able to send you a copy on disk.

• NOR-845 x driver Labview 2011 SP1

  Hi all

  I faced problem,

  I have a LabView program that is used to communicate with devices SPI-NOR-8451. Program worked perfectly, on PC with LabView 2010. After that, I moved the program to new PC where f1 LabView 2011 SP1 has been installed. And now, I am not able even open - LabView program stuck on the white block diagram (not responding).

  Program is complex and includes 10 ~ SubVis, which is packaged in the .llb file. I tried different things - to decompress from .llb, or run subVis themselves - for all the subVis, which include a part any communication NOR-8451, I've got stuck LabView. In addition, after the removal of NOR-845 x pilot, I can't ignore everything and load the program successfully, with '? ' instead of screws of NOR-845 x pallete.

  In addition, when I'am tring from white VI and set NEITHER-845 x ref Device link (see attachment for details Link_on_ref_.jpg) on the block diagram, I'm LabView stuck - see the attached Stuck_.jpg.

  I use NEITHER-845 x driver 2.0, I tried to reinstall several times.

  So, it's my suspicious that NEITHER-845 x driver 2.0 does not work for LabView f1 2011 SP1 - is it possible? Or maybe I'm doing something wrong?

  Hi RangerOne,

  Thanks for the trace, as LabVIEW is suspended, it is what I expected but hoped a different error code. If you could go to MAX and reset Configuration data, and then create a MAX Technical report and attach it.

  If you open the test Panel, you run a query, it works or hang? Try to run a trace when you try to query.

  I see the same error with the camera on my machine under interrupt in Pipe status is not abnormal.

  I also noticed that your computer input for findlist, retcount and SrcName parameters have not the & on the non-working paper. I will continue to examine the reason why the & is not there and if it has an effect on the shot.

  DylanC

• Impossible to download SKYPE. It is said is not compatible

  Impossible to download SKYPE.  It is said is not compatible

  Hi samfell

   

  1. what operating system is installed on the computer?

  2. which version of Skype you trying to install?

   

  Check out the link below to identify the operating system installed on the computer.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  If you have Windows 7 installed on the computer, then you can refer to the below link to the Compatibility Center provided and make sure that the compatible version of Skype -

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Skype&OS=32-bit

  
  For Windows Vista you can check the Compatibility Center link provided below and tick-

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Skype

   

  I hope this helps.

• Impossible to download SQL Server 2005 Express Edition Service Pack 4 (2463332 KB)

  Impossible to download SQL Server 2005 Express Edition Service Pack 4 (2463332 KB)

  SUPPORT IS LOCATED IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• I have xp media center 2004. Download the guide in October 2011, he stopped.

  I have xp media center 2004. Download the guide in October 2011, he stopped. I have read some of the other responses on this issue and tried everything they tried. Nothing has worked. The guide icon shows up and says it's the download, but it does not download. This isn't a UK issue, because I live in the State of WA, identical to MS. I appreciate all help.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Windows Media Center Edition 2004 does not download the Program Guide after you change the download method.

  http://support.Microsoft.com/kb/840825

• Impossible to download photos from Kodak digital camera-message says "the computer can not read scanner or camera".

  Original title: impossible to download photos from Kodak digital camera-message says "computer cannot read the scanner or camera > use cable because the card does not work." It worked fine for 2 years

  Hi twila11,

  · You receive an error with the error code?

  · What is the service pack installed on your computer?

  · What is the model number of the Kodak camera?

  Check the status of the device in the Device Manager. Follow the steps below:

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the device

  c. expand the device, then double-click on it to check if there is no error code or error message.

  In addition, check if updates and patches are distributed by Kodak for the camera on the site of the factory.

  Link:http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=2/6868&pq-locale=en_US&_requestid=66353

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.