Impossible to first level of Cisco would invest 3.0 3.1
J’ai téléchargé le fichier d’installation de mise à niveau de mise à niveau-PI-3.0.X_to_3.1.0.0.132.tar.gz et essayé de l’installer. I follow the normal upgrade procedure. However, after the first step he shows me the error below.
Launch the Application upgrade...
Step 1 of 7: file transfer...
-full.
Step 2 of 7: unpacking file...
% Impossible to dissociate the package. The package is may be damaged, or there is not enough disk space.
I checked that I have more than 65% of disk space. So, I don't know if that's a problem. Any suggestions?
Hello
When you perform an upgrade online from 3.0 to 3.1, first a backup is triggered and it's improvement process is triggered.
Excerpt from the document:
Step 5 move files from backup (files with extension the.tar.gpg) of the /localdisk directory to another server and make sure /localdisk has 80% free space
Step 9 ensure the local repository (defaultRepo) contains no backup file
This must be the reason why you are not able to upgrade successfully. Also check the md5sum of the package shipped with one available on the cisco Web site
I hope this helps.
Thanks and greetings
Rambeau
Tags: Cisco Network
Similar Questions
-
How to release the source code (only) for first level VI?
Hello
I develop an add-on for an application that I have. The demand is large (more than 1,500 VI) and the screws are set up to compile with for most of the default settings (there is a first level VI, some with visible front, most of them are not visible).
The customer wants that source code for the work that I do, and he will use the many existing Subvi. The addon itself will be a Subvi (I have a Main.vi that basically opens 'front' and it is a new screen). The sub - VI existing basically make data collection and treatment, and the new code will perform additional processing and have a nice GUI for existing code. The customer wants the source so that they can make changes as needed.
Is there an easy way to simply provide the source for the first level VI? Basically, I want to give them M.vi, where M.vi name n.vi, o.vi... etc, but o - z.vi should be non-free. In addition, M.vi is called by Main.vi, which opens A screens - M.vi
One option is to copy the entire application, then open each sub - VI and save it without Source Code. But with so many files, this seems like a bad idea. So, I also maintain two applications.
Good ideas out there? It seems if easy in other languages (using object files) it looks like there should be a solution here I don't see... Thank you!
rnelsonee wrote:
Ah! I completely forgot to Save with Options. It's been so long that I had to deal with this type of problem.
OK, to ensure that:
I opened my first level VI, saving Options with-> apply the password (or remove diagrams) and then give it to them. I also provide a normal backup of their VI, with source.
I still about 100 screws which are called dynamically are not part of the VI treeand I would still have to re - register with a password, but it's better than every single VI. Thank you!
Use the option duplicate hiarchy and preserve...
apply to all...
at least as far my memories are good.
Ben
-
SQL to get first level parent counties only
11g,
Hello world
I have a table like
Create the table TempEmp
(number of emp_id,
emp_name varchar2 (100),
number of mgr_id,
report_submit_status varchar2 (1)
)
Insert into TempEmp values (1, 'xxxx', 2, 'Y');
insert into Tempemp values (2, 'YYYY', null, 'n');
insert into TempEmp values (3, 'vvvv', 2, ' don't);
insert into TempEmp values (4, 'tttt', 1, ' only)
I need to show the output of the first level below the EMP is entered and the counts where status = ' not grouped by them.
For example,.
If you run the query for emp_id 2, 1 and 3 reporting directly to him. and the 4-1 statement. If the output should be
County Assessor first_level emp_id where report_submit_Status is N
1 1
3 1
If I ran the sql of emp_id code 1, the output would be
County Assessor first_level emp_id where report_submit_Status is N
4 1
That way the hierarchy could be up to any level, as in an organization.
Any help would be appreciated
Thank you!
Ryan
Hello
According to your specific needs, here's a way:
WITH got_first_level_emp_id AS
(
CONNECT_BY_ROOT SELECT emp_id LIKE first_level_emp_id
OF tempemp
WHERE report_submit_status = ' don't
START WITH mgr_id = 2 - or whatever the desired value
CONNECT BY mgr_id = emp_id PRIOR
)
SELECT first_level_emp_id
COUNT (*) AS count_n
OF got_first_level_emp_id
GROUP BY first_level_emp_id
;
-
VI marking as first level during construction
All by building a Bachelor's degree in LAW, is it possible to specify screws in the upper level. I wasn't able to see an option for this in the construction specifications. I'm using LabVIEW 8.6.
Thank you!
In the file Source settings page, you can mark files as the first level.
Don't forget that you can include files from LabVIEW within a Bachelor of law
Tone
-
How to display the loading Image when you press a first level tab
I have a long report which is directly related to a first level tab and want to display an image that makes the user aware that the application is running and load the data.
Tried to use the plugin loading of Tobias Arnold icon, but it does not occur under this type of event.
No idea how to use this plugin with a tab without submitting the page.
Jeff23 theme is OK, the class = attribute "tab_link" on the tabs. I added that and now it works.
-
Comment: keep the first level of the menu bar visible?
Hello.
A question probably very basic pour most of the PSE community. I am a new user of Elements 9. In the Organizer, I can't seem to keep visible (continuously) the menu at the top of the work area bar. It is systematically reduced in the form of 2 small brackets (< <) that make the invisible basic options. I can't find this convenient. What is a characteristic of the version 9 of PSE-Organizer? There was a way to 'freeze' the menu in the open position, at least pay the first level?
Many thanks if anyone knows the answer because I have consulted a few friends and none of us has failed to address this problem.
Read this:
http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#_Setting_the_Windows
-
Question about my first payment of cisco ISE
Hi, thanks in advance,
It's my first time to be implemented cisco ISE 1.1.4 with Vmware Esxi v5.5
I did so far process
-Created NTP, DNS, AD, of course ESXI running and have link between each other, ISE is able to synchronize the time with ntp server and DNS, etc AD.
-J' created repository for installation of application bundle - which is ise-appbundle - 1.1.4.218.i386 that I could not find any fault of the application.
However, while I was doing installation and it said ' / opt/oracle/base/product/11.2.0/dbhome_1/bin/lsnrctl: error while loading shared libraries: libclntsh.so.11.1: cannot open shared object file: no such file or directory "."
I already check some forums and communities, and I have no problem about synchronizing time on dns with ntp and ISE itself with ntp.
I have no firewall between devices and no other network devices don't interfere.
and at the end of newspapers, it comes up like this
########################################################################################
ERROR: CANNOT START DB!
Database is not available in 240 seconds Timeout.
This could be the result of incorrect network interface configuration
or the lack of resources on the device or the virtual computer. Please solve the problem, run the following CLI to start the database again:
"reset - config application ise"
########################################################################################
Im just lost now... Any recommendation?
Well, it is true that the CCIE Security use ISE 1.1 as its base. So for the installation of laboratory only for this purpose, you might go with him.
90% of the things are similar and the concepts are identical to 1.1 to 1.3. The first versions were buggy however and we recommend to all production users go with 1.3.
A new installation of 1.14 should be OK; but you would not use the Archives of gz appbundle ISE - you need to use the new installation ISO.
Please see screenshot below.
-
We run IOS 8.2 (2) on the ASA 5510. Is there a level first password? If there is, is there a way to know what tier your password?
Thank you.
Laura
Laura,
You can set passwords for telnet, ssh, console etc using the commands of authentication "aaa". If you have these commands in your config file, then you are requiring authentication. You can learn more about this here:
http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/mgaccess.html#wp1042026
In addition, you can also set a password to enable to require passwords before allowing allow them nmode of ASA. This password is configured with password "enable."
http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/EF.html#wp1922477
If you are being prompted to enter a password, but do not know the password, you might have to perform a password recovery:
http://www.Cisco.com/en/us/docs/security/ASA/asa71/configuration/guide/trouble.html#wp1049302
-heather
-
HP deskjet 1050 J410 series: first levels in hp deskjet 1050 J410 series ink
I'm unable to check levels of ink on my printer hp deskjet 1050 J410 series.
I have always used the following method worked well, but WILL NOT WORK today!
Past the method: -.
1. click on Control Panel on the desktop
2. right click on the printer icon.
3. click on keep your printer (to get the dialog box containing the estimated ink levels wording.)
My problem:-I cannot find anywhere MAINTAIN YOUR PRINTER formulation that would allow me to access the dialog box mentioned in (3) above.
Can anyone help please because I am at the end of my mind, I searched everywhere to no avail on the computer for a
solution!
Thank you very much.
Joe
The steps described in the paper here can help find the ink level for your HP Deskjet 1050 j410 on Windows 8.1.
-
Power levels of Cisco 1572 PA Tx
Hello
Anyone know what the Tx power levels available are on the Cisco 1572 access points? I think that the Tx power level maximum APs is the legal limit in the regulatory domain, but I'm more interested in what the levels are on the lower part of the scale. Unfortunately I do not have available to test.
Kind regards
Brett
Hi Brett,
I think you're looking at these values.
http://www.Cisco.com/c/en/us/TD/docs/wireless/compliance/reference/guide/1570_EU.html#55419
Also see this link if you want more details on the technical specifications AP
HTH
Rasika
Pls note all useful responses *.
-
Hello
I wanted to give access to the firewall based on the privilege level pix. By default, it is at level 15. Then, I created a database of aaa
AAA-server local LOCAL Protocol
Console Telnet AAA authentication local
AAA authentication enable console local
Then I created a username as
username password for the privileged comments 9
By default there is no privilege survey for 9. Then to meant to test, I added only the privilege to see the single clock, as the
privileged view level 9 control clock
After that that I'm connected using the host account both telnet and enable but I could do all the task as a person with access to level 15. Can advice me how to set the level of privilege based on users and restrict their access to the firewall. As guest connect you can see that the version of the pix and should not be able to go the config t and any static or access list.
Thanks in advance
Here is the url that speaks exactly that.
http://www.Cisco.com/warp/public/110/pix_command.shtml
PL. see 'Privilege of understanding settings' on this url
-
Images of the map in my Collection of first level only showing not
I have two Collections in my Collection of top level. Both have maps Images applied, although when I saw, I don't see Images of card Collection, only the collections associated within these two in the Pages ahead. Shouldn't I see 2 cards when the application is started initially? One for each collection in my Top Collection?
Jeff
Hi Jeff,
So that you will never see all the cards for the elements in it, there is no page navigation for the top-level collection. The top-level collection defines all the elements that make up the level menu upper and left/right content accessible by scanning when the app starts everything first.
To get the structure, you're after you should do another collection (I usually call 'home') and put this collection to your TLC. Add then your other two objects at home.
Neil
-
Please can someone help?
My catalogue LR4 suddenly started showing pictures to folder and subfolder level 0 and only shows the correct number of images at the file level.
Your help would BE welcome.
Thank you.
Click on the sign in Control Panel folder + and check "display the Photos in subfolders.
-
My current system is having a hard time to follow and it's time for an upgrade. I have a license for Adobe Design Standard CS6 and would obviously like to ensure that my license is valid after the upgrade.
How can I go on the migration from one system to another? Are there of "traps" I should be aware of?
is there a publication "how to" document on how to do this?
Thanks in advance.
Rgds,Maurice
No use of account something designed to make the upgrade without pain by copying the software everywhere... will leave you with something more or less broken. Reinstall and configure properly takes time, but are necessary.
The basic 'how' is ' imagine that you bought just for the first time. After that it works, turn off on the old system to avoid future pain.
I do not know if someone has views on the appropriateness of using migration for other purposes. I tend to say, just reinstall, copy data, again put in place.
-
creating a first level RTOS VI (RT HAND?)
Hello experts,
I have following question: zum "OR LabVIEW for the CompactRIO Developers Guide" Figure 3.1. (Art. 27), die die Struktur of Top - Level - VI auf dem RTOS shows.
* [http://www.ni.com/pdf/products/us/criodevguidesec1.pdf]
1 die mit "HAND RT" beschrifteten VI habe ich in keiner Bibliothek found. Um as VI is're sich dear und wo sind sharp ggf. to find?
2 there are possibly einen complete Beispielcode dazu?
Danke für die Hilfe
Andreas
Hello Andreas,
Tradierten wurde das RT Main.vi ein own themselves breast das den Programmcode VI
zum Ablauf der Maschine contains. Es sich auf dem Bild nur um eine schematische out
Representation wie ein solches VI aufgebaut breast konnte.
Im from NI CompactRIO Developers Guide different additional libraries wie die verwendet werden
Simple messaging (STM) reference library
Reference library for the Table of the current value (CVT)
NI CompactRIO waveform reference library
Darin sind die VI´s zu sehen sind die included further.
Yesterday Referenz Architekturen
In vehicles repository Datalogger for CompactRIO systems
cRIO Vibration Data Logger Reference Design
Hope ich die information helfen Ihnen weiter.
Maybe you are looking for
-
Please tell me why the new version of fire fox trying so hard at my computer.plus time, I opened the Fire Fox opened with an apps/conduit please delete. also the fire flicker fox opening and closing of Fire Fox.
-
I received an email from myself - DO NOT sent by me? I didn't send it, it was junk! I've been hacked?
-
I use Windows Vista. How can I configure Windows to bring up a window asking me what to do (eg. open to view files, play music with Windows Media Player, print photos using Microsoft Office Picture Manager etc.) whenever I have insert a flash into th
-
Windows connection problems and "Windows could not log in the Windows Event Service.
September 14, 2014, I installed the hotfix for Windows (KB2590550). When I try to log on to a standard user account (not Admin), I would get an error that might say something like "Windows could not connect to the Windows Service Service event". I c
-
Export button on the Advanced sub-region Switcher does not fetch data in excel
Hi allI have an urgent need.The question is:I have a Swich area, based on its attribute VO, Case1-> makes Advanced Table1, CAS2-> make advanced table2Now, I have exportButton in advance Table1 and Table2 advance.After querying data on the page, by cl