Impossible to get CC Office to install

Similar Questions

• Impossible to get 5 Ligtroom to install

  I can not get 5 Ligtroom to install. I just signed for CC and I was able to download and install photoshop and bridge without problem, but I can't get 5 Ligtroom to install.  It downloaded, but when I try to install it gets to 99% and then I get this error...

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DW006...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80}.

  ERROR: DW006: Apple package cannot be installed successfully.

  ERROR: third charge useful Adobe Photoshop Lightroom 5 installer. pkg failed with exit code: 1

  -------------------------------------------------------------------------------------

  Any ideas what I can do to help?

  Jason

  Hi Jason,

  Please confirm the details of the operating system.

  5 Lightroom requires Mac OS X 10.7 or higher.

  Find the system requirements for Lightroom 5 here:

  http://www.Adobe.com/products/Photoshop-Lightroom/tech-specs.html

  Please visit the following help on the same error message document.

  http://helpx.Adobe.com/Lightroom/KB/exit-code-7-displays-installing.html

  Kind regards

  Sumit Singh

• Satellite A30 - impossible to get a sound after installing XP

  Am not able to get sound after installing XP. Drivers from the Toshiba web site do not help. Does anyone have an idea on this issue. Thank you

  Hello

  It's old model of laptop, and all pilots must work. I'm sure you make a mistake. On this old notebook, you must install Windows XP Home SP1 edition and after doing this install all patches software, driver chipset, driver and driver sound to the less rated. The sound should work fine.

  If you have laptop model please download the drivers from the EMEA support page http://eu.computers.toshiba-europe.com

  Good bye

• Impossible to get Highway 2011 to install

  Impossible to install Highway 2011 because it is not completely installed?

  Thank you

  Paul

  Hi Paul Paton.

  This thread has been created in the Microsoft answers Site Feedback forum. the Microsoft moderation team has moved this thread on the Forum of programs.

  Thank you!

• Impossible to get updates of windows install on Vista Home Premium.

  Asked me to look at laptop Vista Home Premium SP2 a parent.

  On the control that I found that mid-November he did not updated either and any attempt to kick start this fails. I spent 2 nights and good Googling to get this fixed number, but now I'm stuck.

  The machine seems to be in a bit of a cycle, i.e. that force it to check the updates, it does, but then wants to update the agent on the machine. WU closes and not re - opens.
  Re-opening WU shows that this update failed and I got several WU error codes all different. Currently I have the error code is: 8024001

  So far, I have (in no particular order):
  Tried to re - install manually the WU agent, the normally and aggressively - these two don't
  Install updates via Autopatcher it also fails
  Run CheckSUR.exe, which ends, but solves nothing
  WMIdiag na go out with something useful
  Disabled the AV (Sophos) and do the updates - still fails
  Did a reboot selective via MSCONFIG - always fails when you try
  WU arrested and removed "C:\Windows\SoftwareDistribution" - still does not work.
  Has attempted to re - apply SP2 - will not be re - apply!

  Then, someone at - it ideas?

  Windows Vista Edition Home Premium
  SP2 successfully applied
  Dell Inspiron 1520

  Thank you
  Graeme

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to get VM Tools to install

  I mount the image converted from my PC under XP SP3.  I can't get VM tools of load/install.  I tried several different things based on info in the comments.  It has not installed with Fusion2.0 so I upgraded to 2.0.2 and it still does not work.  I watch the VM menu and it said 'Cancel VM tools install.  I restart the vm machine and still no luck.  I don't want to turn on and have to start all over again.  My XP is a retail purchased the upgrade to Win98 (OEM).  I have a program that I need to run on the PC, but do not want to go to the PC to run it.  Any ideas?

  My XP is a retail purchased the upgrade to Win98 (OEM)

  In the Virtual Machine library window, which guest operating system Fusion think machine has virtual - XP, 98, something else?

  The menu item install VMware Tools to connect the image appropriate to the guest. If you have autorun disabled (safer), you must run D:\setup.exe.

• Impossible to get 10.3 flash installed on my mac

  know that I am trying to install the right version, but I messed up something and it only happens to 5% to 27% insalled and then he said: installation failed. any ideas? Thank you!

  Follow the instructions here to uninstall it first: http://kb2.adobe.com/cps/909/cpsid_90906.html

  Then go here and choose the version you want: http://get.adobe.com/flashplayer/otherversions/

  Post edited by: Xircal

• Impossible to get 10.3 to install

  My computer is not compatible with flash player 11 but cannot get 10.3 to work either. It load to half way and says error and now I can not even find the right item to download. They are all debugs etc. that I see.

  In my programs, I have Adobe Flash Player 10 Active X installed, but I think it's only a part of what I need... I can't find what I need on the Web site. I come back to, "more up-to-date version", that I can't use.

  ActiveX for Internet Explorer, if you do not use that is, uninstall ActiveX Flash Player.
  For other browsers, here's the plugin of Flash Player Flash Player 11 32-bit:

  Flash Player for other browsers

  Or if you want to keep the Flash Player 10.3:

  Flash Player 10.3 for other browsers

• Impossible to get any OS to install PowerEdge 1750 Server

  I'm having some trouble with that and it makes me nuts. It's the 1st Rackmount Dell I worked on. Other then that I was working on a tower. But the part that I did not do anything with the SCSI hard drives is.

  So maybe someone here can help me. I got a Dell PowerEdge 1750, 2 Maxtor 36 GB SCSI disks in there. The server was using RAID mirror the primary drive before being erased and replaced. So now, the server must be configured with Linux and it does not matter if drivers are reflected in the RAID at all.

  So I tried to install Ubuntu server OS and he repeated to me that it cannot find the drivers for the drives. I tried a few drivers here at DELL who have been to Red Hat and it did not work.

  Then, I tried a copy of Red Hat Linux 8.0 and had the same problem that Ubuntu has given me.

  Then laughing, I tried a copy of Windows XP Home Edition who was sitting by a former Workstation. Same problem, Windows could not find the hard drives. I have download the drivers PERC 4/Di windows server 2000 and 2003 (x 84). Tried loading to see if pilots would allow me to install the OS or not. Never worked.

  Finally try, I popped a copy of Windows Server 2003 R2 Enterprise Edition in and he had the same problem as XP, so I pop the drivers PERC 4/Di and selected the driver for Windows Server 2003 and it has yet to find the hard drives.

  What I am doing wrong?

  NEWS POST:

  Integrated server 1.80 Firmware revision management

  Review from the primary backplane Firmware 1.01

  PowerEdge Expandable RAID Controller BIOS B109 February 18, 2003

  PERC 4/Di Standard FW 4.04

  0 logical drives to the host adapter

  Or logical drives 0 managed by the BIOS

  Broadcom NetXtreme managed by BIOS Boot Agent V7.0.3

  I don't know if this noraml or not, I think that it funny that he finds the 0 logical drives, but when you go into the configuration both appear in there.

  PERC does not support non - RAID JBOD, so if you want mirrored or not, you must configure the drives in the PERC BIOS (CTRL-M)... or put it turns off and only use the system SCSI controller.

  If you want to use as separate readers readers / person, you must configure each disk in a single drive RAID 0.

  If you want to disable RAID and used in SCSI mode only, so you need to start on the configuration of the BIOS (F2), embedded devices, and Embedded RAID SCSI value active.

  The fact that the POST said 0 logical drives found indicates that the disks are not configured - don't forget, readers must be configured in a sort of table before they can be used by the operating system.  So it must show at least a logical drive before installation can never be successful.

  Once the RAID is set up, you will need to worry about drivers.

• Impossible to get Vista SP2 installed

  Impossible to get SP2 to install on my windows vista 32 bit

  Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Service Pack 2 for Windows Server 2008 and Windows Vista
  http://TechNet.Microsoft.com/en-us/Windows/dd262148

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• Windows Search 4 the program active with a log on before you can use the start menu. It is sometimes impossible to open an Office application.

  Original title: search Windows 4

  With Windows Search 4, the program active at the log on before you can use the start menu. Several search screens occur and reproduce when they are closed. Sometimes it's impossible to open an Office, research childcare opening application.

  Hi Ken_978,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  ·         The question is only limited to Office applications?

  ·         What exactly happens when you try to open an Office application? You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.

  Follow the steps below to uninstall:

  a. click on Start

  b. click Control Panel

  c. select Add / Remove Program

  d. place a check on "Show updates"

  e. you will see Windows Desktop Search 4.0 and uninstall it.

  Reinstall back, you can see the link below:

  http://www.Microsoft.com/Windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx

  Hope this information helps.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Break-in Thinapp Office 2007 Win764bit with Office 2010 installed

  Hello, we have a use case where some Excel documents can be run in Office 2007.  Therefore, I decided to just Excel 2007 or Office 2007 thinapp.  All of our VDI boxes already have Office 2010 installed in native mode.

  Office 2007 thinapp well, but now we have another problem.

  Whenever the user opens all excel documents, it opens Excel 2007 instead of Excel 2010.  The user wants to open Excel 2010 whenever he opens an excel document.  However, the user is aware that he must run Excel 2007 first of all, every time he wants to open those special few Excel documents.

  But, once that Excel 2007 is broadcast to its VDI box, open excel documents eventually call Excel 2007 instead of Excel 2010.

  Is there a solution to this problem?  I suppose that this will be a registry change, but don't know where.

  Thank you!

  > Whenever the user opens all excel documents, it opens Excel 2007 instead of Excel 2010.  The user wants to open Excel 2010 whenever he opens > all excel document.  However, the user is aware that he must run Excel 2007 first of all, every time he wants to open those little special Excel > documents.

  > But once Excel 2007 is broadcast to its box VDI, opening all excel documents will eventually call Excel 2007 instead of Excel 2010.

  1. in the statements above, as I understand it is that the user wants to open most documents in Excel 2010, only a handful of some of the documents should open in Excel 2007. And current behavior in your environment, it's that all documents will open in Excel 2007. Is there a difference in behavior if Excel 2007 is running or not at this time, when the user double-clicks a document (opening).

  2. in addition, I you recommend to check the HKEY_CLASSES_ROOT\.xls subkey and get the "Excel.Sheet.x" (where x is a number) and then find the value of HKEY_CLASSES_ROOT\Excel.Sheet.x\Shell\Open\Command, which usually a file path, which makes this point in your case, if it is Excel 2007, then change it so that it points to Excel 2010 and test it.

  Thank you.

• Cannot get original InDesign to install on a G5 running OS 10.5.8

  Original CS bought and installed on iMac G5. Recently, the computer died a tragic death. I bought a used machine but same vintage running OS 10.5.8. I was able to install Photoshop CS and Illustrator CS (after a few errors). But impossible to get InDesign to install. : Error could not complete the installation of disc. Need help.

  Johnheg can you try copying the contents of the disk on your desktop.  This will let us know if there is a failure in the installation media if you receive a disk error.