Impossible to get Highway 2011 to install

Similar Questions

• Impossible to get 5 Ligtroom to install

  I can not get 5 Ligtroom to install. I just signed for CC and I was able to download and install photoshop and bridge without problem, but I can't get 5 Ligtroom to install.  It downloaded, but when I try to install it gets to 99% and then I get this error...

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DW006...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 2 error (s)

  -Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80}.

  ERROR: DW006: Apple package cannot be installed successfully.

  ERROR: third charge useful Adobe Photoshop Lightroom 5 installer. pkg failed with exit code: 1

  -------------------------------------------------------------------------------------

  Any ideas what I can do to help?

  Jason

  Hi Jason,

  Please confirm the details of the operating system.

  5 Lightroom requires Mac OS X 10.7 or higher.

  Find the system requirements for Lightroom 5 here:

  http://www.Adobe.com/products/Photoshop-Lightroom/tech-specs.html

  Please visit the following help on the same error message document.

  http://helpx.Adobe.com/Lightroom/KB/exit-code-7-displays-installing.html

  Kind regards

  Sumit Singh

• Satellite A30 - impossible to get a sound after installing XP

  Am not able to get sound after installing XP. Drivers from the Toshiba web site do not help. Does anyone have an idea on this issue. Thank you

  Hello

  It's old model of laptop, and all pilots must work. I'm sure you make a mistake. On this old notebook, you must install Windows XP Home SP1 edition and after doing this install all patches software, driver chipset, driver and driver sound to the less rated. The sound should work fine.

  If you have laptop model please download the drivers from the EMEA support page http://eu.computers.toshiba-europe.com

  Good bye

• Impossible to get updates of windows install on Vista Home Premium.

  Asked me to look at laptop Vista Home Premium SP2 a parent.

  On the control that I found that mid-November he did not updated either and any attempt to kick start this fails. I spent 2 nights and good Googling to get this fixed number, but now I'm stuck.

  The machine seems to be in a bit of a cycle, i.e. that force it to check the updates, it does, but then wants to update the agent on the machine. WU closes and not re - opens.
  Re-opening WU shows that this update failed and I got several WU error codes all different. Currently I have the error code is: 8024001

  So far, I have (in no particular order):
  Tried to re - install manually the WU agent, the normally and aggressively - these two don't
  Install updates via Autopatcher it also fails
  Run CheckSUR.exe, which ends, but solves nothing
  WMIdiag na go out with something useful
  Disabled the AV (Sophos) and do the updates - still fails
  Did a reboot selective via MSCONFIG - always fails when you try
  WU arrested and removed "C:\Windows\SoftwareDistribution" - still does not work.
  Has attempted to re - apply SP2 - will not be re - apply!

  Then, someone at - it ideas?

  Windows Vista Edition Home Premium
  SP2 successfully applied
  Dell Inspiron 1520

  Thank you
  Graeme

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to get VM Tools to install

  I mount the image converted from my PC under XP SP3.  I can't get VM tools of load/install.  I tried several different things based on info in the comments.  It has not installed with Fusion2.0 so I upgraded to 2.0.2 and it still does not work.  I watch the VM menu and it said 'Cancel VM tools install.  I restart the vm machine and still no luck.  I don't want to turn on and have to start all over again.  My XP is a retail purchased the upgrade to Win98 (OEM).  I have a program that I need to run on the PC, but do not want to go to the PC to run it.  Any ideas?

  My XP is a retail purchased the upgrade to Win98 (OEM)

  In the Virtual Machine library window, which guest operating system Fusion think machine has virtual - XP, 98, something else?

  The menu item install VMware Tools to connect the image appropriate to the guest. If you have autorun disabled (safer), you must run D:\setup.exe.

• Impossible to get 10.3 flash installed on my mac

  know that I am trying to install the right version, but I messed up something and it only happens to 5% to 27% insalled and then he said: installation failed. any ideas? Thank you!

  Follow the instructions here to uninstall it first: http://kb2.adobe.com/cps/909/cpsid_90906.html

  Then go here and choose the version you want: http://get.adobe.com/flashplayer/otherversions/

  Post edited by: Xircal

• Impossible to get 10.3 to install

  My computer is not compatible with flash player 11 but cannot get 10.3 to work either. It load to half way and says error and now I can not even find the right item to download. They are all debugs etc. that I see.

  In my programs, I have Adobe Flash Player 10 Active X installed, but I think it's only a part of what I need... I can't find what I need on the Web site. I come back to, "more up-to-date version", that I can't use.

  ActiveX for Internet Explorer, if you do not use that is, uninstall ActiveX Flash Player.
  For other browsers, here's the plugin of Flash Player Flash Player 11 32-bit:

  Flash Player for other browsers

  Or if you want to keep the Flash Player 10.3:

  Flash Player 10.3 for other browsers

• Impossible to get any OS to install PowerEdge 1750 Server

  I'm having some trouble with that and it makes me nuts. It's the 1st Rackmount Dell I worked on. Other then that I was working on a tower. But the part that I did not do anything with the SCSI hard drives is.

  So maybe someone here can help me. I got a Dell PowerEdge 1750, 2 Maxtor 36 GB SCSI disks in there. The server was using RAID mirror the primary drive before being erased and replaced. So now, the server must be configured with Linux and it does not matter if drivers are reflected in the RAID at all.

  So I tried to install Ubuntu server OS and he repeated to me that it cannot find the drivers for the drives. I tried a few drivers here at DELL who have been to Red Hat and it did not work.

  Then, I tried a copy of Red Hat Linux 8.0 and had the same problem that Ubuntu has given me.

  Then laughing, I tried a copy of Windows XP Home Edition who was sitting by a former Workstation. Same problem, Windows could not find the hard drives. I have download the drivers PERC 4/Di windows server 2000 and 2003 (x 84). Tried loading to see if pilots would allow me to install the OS or not. Never worked.

  Finally try, I popped a copy of Windows Server 2003 R2 Enterprise Edition in and he had the same problem as XP, so I pop the drivers PERC 4/Di and selected the driver for Windows Server 2003 and it has yet to find the hard drives.

  What I am doing wrong?

  NEWS POST:

  Integrated server 1.80 Firmware revision management

  Review from the primary backplane Firmware 1.01

  PowerEdge Expandable RAID Controller BIOS B109 February 18, 2003

  PERC 4/Di Standard FW 4.04

  0 logical drives to the host adapter

  Or logical drives 0 managed by the BIOS

  Broadcom NetXtreme managed by BIOS Boot Agent V7.0.3

  I don't know if this noraml or not, I think that it funny that he finds the 0 logical drives, but when you go into the configuration both appear in there.

  PERC does not support non - RAID JBOD, so if you want mirrored or not, you must configure the drives in the PERC BIOS (CTRL-M)... or put it turns off and only use the system SCSI controller.

  If you want to use as separate readers readers / person, you must configure each disk in a single drive RAID 0.

  If you want to disable RAID and used in SCSI mode only, so you need to start on the configuration of the BIOS (F2), embedded devices, and Embedded RAID SCSI value active.

  The fact that the POST said 0 logical drives found indicates that the disks are not configured - don't forget, readers must be configured in a sort of table before they can be used by the operating system.  So it must show at least a logical drive before installation can never be successful.

  Once the RAID is set up, you will need to worry about drivers.

• Impossible to get CC Office to install

  This all started when I tried to update the necessary until my CC already installed office. I hit the update and it simply never exceeded 2%. I did some searching through the forums and decided to uninstall all the CC's of things on my computer and do a fresh install. Now I am trying to install the CC desktop application and it is hampering about 1/4 on the way through and does nothing. No errors. Not nothing. He's here. If I try to cancel the installation it ask me "if I am sure" and when I say yes, it never goes away.

  I don't know what to do at this point. Please help I need to work on projects.

  Thank you

  CHR.s

  OK so I've corrected this problem and how I fixed it is not in the forums that I know. I can't guarantee this is what fixed the issue but I was tired ALL forums and the chat suggested Adobe rep and it was the only thing that worked. Just in case anyone else has this problem, here is how I fixed it.

  I got to talk to someone from Adobe cat and they had me try several solutions, I had already tried. I tried everything at this point. If the rep has ended up giving me a link direct to Adobe Application Manager and said who would fix it. They (type of) sounded confident. The problem is that I had at the end of my conversation with him (or her) in order to install this hotfix. Then I restarted, double click on install and... same question. Hampers is to 'download' and leaves me not force quit. I could not even so he can force leave via activity monitor. Needless to say I was back to square one without answers. Then I noticed that I could not connect to the App Store. Same question King... to hinder, rinse and repeat. These issues could be related? Perhaps? I'll try anything at this point. So I started looking in the fixes for when you cannot sign "in the App Store" and came across this link. OS x: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support I went through the list and nothing worked. That is until I have got down to "invalid or incorrect certificates. What it means. Then I dropped both of these cache files in the trash (as stated in), restarted my computer and boom goes the dynamite! Worked like a charm.

  I had CC upward and the installation of Photoshop in a few minutes. Still, I don't think it's common, so I wanted to help out if anyone has any questions.

  Thanks for your help kglad

  CHR.s

• Impossible to uninstall AVB 2011

  Impossible to uninstall AVB 2011 after installing Zone Alarm + firewall free antivirus. AVB still makes me even when ZA is scanning that slows down the system.

  Do you mean AVG?  See http://www.avg.com/us-en/utilities

• Impossible to get Vista SP2 installed

  Impossible to get SP2 to install on my windows vista 32 bit

  Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Service Pack 2 for Windows Server 2008 and Windows Vista
  http://TechNet.Microsoft.com/en-us/Windows/dd262148

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Cannot get original InDesign to install on a G5 running OS 10.5.8

  Original CS bought and installed on iMac G5. Recently, the computer died a tragic death. I bought a used machine but same vintage running OS 10.5.8. I was able to install Photoshop CS and Illustrator CS (after a few errors). But impossible to get InDesign to install. : Error could not complete the installation of disc. Need help.

  Johnheg can you try copying the contents of the disk on your desktop.  This will let us know if there is a failure in the installation media if you receive a disk error.

• Impossible to find a J2SE SDK installed to the path: < ECLIPSE_INSTALL_PATH > \jre6

  I try to run SQL developer for the first time, but get the error message similar to the following:
  
  Impossible to find a J2SE SDK installed to the path: < ECLIPSE_INSTALL_PATH > \jre6
  
  * < ECLIPSE_INSTALL_PATH > - advanced to the Eclipse installation path (includes JDK 6_U16)
  
  I tried setting the JAVA_HOME to < ECLIPSE_INSTALL_PATH > \jre6 environment variable that does not work.
  
  Can anyone help? Thanks in advance.

  Developer SQL requires a JDK to run (you are actually showing a JRE).

  To set the location of the JDK to use for SQL Developer, you can add the next line with the path to a valid JDK installation:

  C:\Program Files\Java\jdk1.6.0_18 SetJavaHome

  sqldeveloper.conf, usually located in /sqldeveloper/bin