Impossible to get data of Httpconnection and analyze these data on the real device

Hello

I use a Blackberry 9000 "BOLD" device. I get xml using the Http connection. My Simulator, it works fine. (Note that I'll have to keep MDS - CS run in HTTP request).

but when I install the application on the device it shows only the UI elements. No data is downloaded from HTTP connection.

Do I have to apply all the settings on the device? Please suggest.

Thank you

Aktaion.

Make sure that properly define the connection string.

There is a very good guide here: http://www.localytics.com/blog/post/how-to-reliably-establish-a-network-connection-on-any-blackberry...

Tags: BlackBerry Developers

Similar Questions

Y510 unable to get data from the camera.

Hello

I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

Thank you

Peter

I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

Hi BartlettNYC,

Please see the links below, to solve the problems with Window XP SP3.

Steps to take before you install Windows XP SP3.

http://support.Microsoft.com/kb/950717

How to troubleshoot a windows XP SP3 Installation failure.

http://support.Microsoft.com/kb/950718

Good luck.

I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook Windows xp sp3 home.

I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook.

I tried to connect my netbook to a sony bravia tv and I pressed the power button to restart because it was so slow awakening of the mode standby

I am running windows xp home sp3. What should I do?

Hi samp2000,

Follow the steps in this article to resolve the problem:

When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

I get my serial number and click on 'Download', then the dialog box says 'unavailable screen '. What the devil?

I get my serial number and click on 'Download', then the dialog box says 'unavailable screen '. What the devil?

Please access the following link to download the installer of Photoshop elements 14. If you're still having problems, try to please the link to Chrome or Firefox and check if it downloads.

Download Photoshop Elements | 10, 12, 14, 11, 13

Thank you.

Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

I just burn a CD with no problem at all. Using the same type of CD, brand new, I tried to burn another CD and got this error message:

Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message. No idea why my CD-writer has decided to stop working for me?

Hi Cierrajade,

1. you have any third-party DVD burning software installed on the computer?

Method 1

You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

Method 2

If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

Disc burning: frequently asked questions

http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

Method 3

If the previous step fails, check if you can burn CDs using Windows Explorer

Burn a CD or DVD in Windows Explorer

http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

I hope this helps!

Halima S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

How to develop and test the application mobile flex without the real device?

I'm trying to read some information about it, but decided to ask also here.
I have a project that has a company wants to grow me, it's for iPad. That's ok I am with Flex and the framework for web development, but not for mobile. Why? Because I have no idea how to test my application. I know generation ago it sort of the desktop version of the application with the change of the "back" button on the orientation stuff, but how do I know my application will look and work exactly the same (I mean NOT performance here). I mean you know how every android or iOS device have their native keyboard or native video player for example and I have only in the debug version of the application.
The question is how to develop this application based on the desktop emulator or anything and then hope that my app looks and works on a device, as it should... Of course I can't afford to buy all the devices it is just to be able to test on it if necessary? So, how do you, how to test how my iPad app works on a device without a? I know I should get a licence from iOS dev to be able to package the app for iOS, but it's $ 99 per year or something like that I can handle, but how to test my application without having to buy the darn device? Are there any emulator for iPad or something like that I know what my customers will see when they get the application? One of my friends told me that the mac os x use the developers a tool - cause some kit of dev who has emulators for all iOS devices and you can build and test there immediately and that you can simulate virtually any combination of key for example, and he said he's working and seems to 1:1 as the real device but he didn't know if can I export an AIR application and try it like this, he only knew for app written in native code.
If someone can just tell me how should I do this? Should I buy a mac os x computer laptop to test because I am a user of windows 7, or perhaps create a mac os x virtual machine and tests out there or maybe the only option is to actually buy the device... that would be terrible for a freelancer...
I hope someone can save the day here! Thank you.
F

Since the AIR for iOS applications are compiled to ARM code you will not be able to run on iOS emulators running on Mac OSX.

You can do a very simple test with the "Simulator" built into Flash Builder, but it is not much more than a window to AIR with a window size that matches the resolution of the selected iOS device. When running in the simulator of the application is not compiled to ARM code so it will take a completely different code path than what will be the final release of iOS.

Ultimately if you are developing for iOS with AIR nothing but for tests on real iOS devices.

Impossible to get a php form and web to work properly

Hello
I have a web form in html and php code that works fine in my old site.
I've just updated my site and must transfer the code for the html form in a newly designed page.
I copied and pasted the form into the new page. The form set up and working properly, except that it does not send the form to my email address.
Everything seems to be the same as my old page but obviously I don't not linked them correctly. I have attached the code for two html files. Thanks for any help. Owen
form code
< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
" < html xmlns =" http://www.w3.org/1999/xhtml "> <!-InstanceBegin template="/Templates/PGATEMPLATE3.dwt ' codeOutsideHTMLIsLocked = 'false'->
< head >
< meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
<!-InstanceBeginEditable name = "doctitle"-->
< title > Golf lessons Golf INSTRUCTION IN MARYLAND, Baltimore Owen Dawson PGA GOLF LESSONS IN BALTIMORE < /title >
< meta name = "Keywords" content = "LESSONS of GOLF, GOLF LESSONS IN BALTIMORE, BALTIMORE, MARYLAND, BALTIMORE, SHORT GAME, BUNKER PLAY INSTRUCTION GOLF" / >
< name meta = "Description" content = "Golf Instruction at Baltimore Maryland" / >
<! - InstanceEndEditable - >
< link href = "file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/twoColFixRtHdr.css" rel = "stylesheet" type = "text/css" / >
<!-[if IE 5] >
< style type = "text/css" >
/ * Place corrections for IE 5 css box model * in this conditional comment * /.
.twoColFixRtHdr #sidebar1 {width: 220px ;}}
< / style >
<! [endif]--> <!-[if IE] >
< style type = "text/css" >
/ * place patches css for all versions of Internet Explorer in this conditional comment * /.
.twoColFixRtHdr #sidebar1 {padding-top: 30px ;}}
.twoColFixRtHdr #mainContent {zoom: 1 ;}}
/ * the owner above zoom gives IE the hasLayout property, avoid several bugs * /.
< / style >
<! [endif]-->
< script src = "file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script >
< link href = "file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/SpryAssets/SpryMenuBarHorizontal.css" rel = "stylesheet" type = "text/css" / >
< style type = "text/css" >
 <! - InstanceEndEditable - >
< / head >
< body class = "twoColFixRtHdr" >
< div id = "container" >
< div id = "header" >
< h1 > < img src = "file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/photos/newpgabannerfinal3_2_10.png" width = "739" height = "210" / > < / h1 >
<!-InstanceBeginEditable name = "EditRegion4"->
< ul id = "MenuBar1" class = "MenuBarHorizontal" >
< li > < a href = "file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/index.html" class = "style1" > home < /a > < /li >
< li > < a href = 'file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/V1Login.html' class = 'style1' > V1 student videos < /a > < /li >
< li > < a href = 'file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/Private_Lessons.html' class = 'style1' > tutoring < /a > < /li >
< li > < a href = 'file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/Clinics.html' class = 'style1' > clinics < /a > < /li >
< li > < a href = 'file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/PGAPHOTOGALLERY/index.html' class = 'style1' > photo library < /a > < /li >
< li > < a href = 'file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/Gift_Certificates.html' class = 'style1' > gift certificates < /a > < /li >
< li > < a href = 'file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/Instructional_Video.html' class = 'style1' > instructional video < /a > < /li >
< li > < a href = "mailto: " [email protected] "class ="style1"> Contact Owen < /a > < /li > "
< /ul >
<! - InstanceEndEditable - >
< p align = "center" > < / p >
<!-end #header--> < / div >

< div id = "sidebar1″" >
< class p = "style7" > < a href = "file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/Contact_Form.html" > form of statement < /a > < /p >
< class p = "style7" > < a href = 'file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/Sample_Lesson.html' > lesson example < /a > < /p >
" < class p ="style7"> < a href =" http://www.YouTube.com/user/owenpga "target ="_blank"> video tutorials < /a > < /p > "
" < class p ="style7"> < a href =" http://owendawsonpga.blogspot.com "target ="_blank"> < /a > < /p > educational Blog "
< class p = 'style7 style8' > < / p >
< class p = "style2" > < / p >
< class p = "style2" > < /p > testimonials
< class p = "style6 style7" > "I worked with Owen Dawson for 7 years. During this time my swing has changed and improved. This has happened through exercises and the use of the video of Owen. It is because of these techniques, I understand how to hit good shots, but equally important why I hit a bad shot. I'm glad that I had the opportunity to work with Owen and highly recommend. "< strong > Sam Young - Country Club of Maryland - 2009 men's Club Champion < facilities > < / p >"
< class p = "style2" >... < /p >
< class p = "style6 style7" > "Owen made two things particularly well, in my opinion. First of all, he is a master of the recording technology, and it really helps me to see what I need to fix, and what must be the new movement. Second, Owen knows what the best next step should be in your own journey to a better swing. I took a lesson or two from Owen each year for the last three or four years - a relatively small step at a time and then worked on grooving this step. During this period, my index finger was removed about 8 shots, and in 2007 I won the 'Most improved player' award of the Club. Congratulations to Owen! "< /p >
< class p = "style6 style7" > < Bill Smillie - strong CCofMD > < / strong > < / p >
< h3 class = "style2" > < a href = "file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/Testimonials.html" > read other testimonials < /a > < / h3 >
<!-end # sidebar1″->
< / div >
<!-InstanceBeginEditable name = "MAINCONTENT" value->
< div id = "mainContent" >
< do action = "contactformprocess_original_db.php" method = "post" enctype = "multipart/form-data" name = "form1" id = "form1" target = "ifr" > "
< class p = "style5" > name < /p >
< p >
< label for = "textfield" > < span class = "style5" > first </span > < / label >
< input type = "text" name = "textfield" id = "textfield" / >
< /p >
< p >
< label for = "textfield2" > < span class = "style5" > last </span > < / label >
< input type = "text" name = "textfield2" id = "textfield2" / >
< /p >
< p > < span class = "style5" > phone number
< label >
< input type = "text" name = "textfield3" id = "textfield3" / >
< / label >
</span > < / p >
< p > < span class = "style5" > </span > Email
< label >
< input type = "text" name = "textfield4" id = "textfield4" / >
< / label >
< /p >
< p > < span class = "style5" > address
< label >
< input type = "text" name = "textfield5" id = "textfield5" / >
< / label >
</span > < / p >
< p > < span class = "style5" > status </span >
< label >
< input type = "text" name = "textfield6" id = "textfield6" / >
< / label >
< /p >
< p > < span class = "style5" > Zip Code </span >
< label >
< input type = "text" name = "textfield7" id = "textfield7" / >
< / label >
< /p >
< p > < span class = "style5" > how did you find me? </span >
< label for = "select" > < / label >
< select name = "select" id = "sΘlectionner" >
< option value = "internet" > search the Internet < / option >
< option value = "referral of a friend" > refer a friend < / option >
< option value = "ccmdsite" > Country Club of MD Web site < / option >
< option value = "other" > other < / option >
< / select >
< /p >
< p > < span class = "style5" > what are your Golf goals? </span >
< select name = "select2" id = "select2" >
< option value = "break 100" > break 100 < / option >
< option value = "break 90" > Break 90 < / option >
< option value = "break 80" > Break 80 < / option >
< option value = 'ArrΩter the slice' > stop slice the ball < / option >
< option value = "arrΩter the hook" > stop hang the ball < / option >
< option value = "Compete" > local tournaments Compete < / option >
< option value = more "coherent" > more consistently Hit shots < / option >
< / select >
< /p >
< p > < span class = "style5" > how you can practice? </span >
< label for = 'select3' > < / label >
< select name = "select3" id = "select3" >
< option value = '1 hour' > 1 hour < / option >
< option value = '2 hours' > 2 hours < / option >
< option value = '3 hours' > 3 hours < / option >
< option value = "3 hours >" > more than 3 hours a week < / option >
< / select >
< /p >
< p > < span class = "style5" > you want to learn? </span >
< label for = 'select4' > < / label >
< select name = "select4" id = "select4" >
< option value = "full swing" > Full Swing mechanics irons < / option >
< option value = 'swing driver' > Full mechanical Swing driver < / option >
< option value = 'short locations' > Short Pitch shots inside 50 yards < / option >
< option value = 'bunker game' > Bunker play < / option >
< option value = "chipping" > Chipping < / option >
< option value = "short shots" > short strokes from rough < / option >
< / select >
< /p >
< class p = "style5" > what's your Handicap? < label for = "choisies5" > < / label >
< select name = "choisies5" id = "choisies5" >
< option value = 'scratch 5' > Scratch - HDCP 5 < / option >
< option value = "6-10" > 6-10 HDCP < / option >
< option value = "11 to 15" > 11-15 HDCP < / option >
< option value = "15 to 20" > 15-20 HDCP < / option >
< option value = "> 21" 21 > and < / option >
< / select >
< /p >
< class p = "style5" > how long have you been playing?
< label for = "select6" > < / label >
< select name = "select6" id = "select6" >
< option value = "beginner" > start < / option >
< option value = '2 to 5' > 2-5 years < / option >
< option value = '6 to 10 years' > 6-10 years < / option >
< option value = "11-15 years" > 11-15 years < / option >
< option value = "> 15" > 15 years < / option >
< / select >
< /p >
< class = "style5" p > have you ever had a lesson?
< label for = "select7" > < / label >
< select name = "select7" id = "select7" >
< option value = "yes" > YES < / option >
< option value = "no" > n < / option >
< / select >
< /p >
< class p = "style5" > more information
< label >
< name textarea = "textfield8" pass = "40" id = "textfield8" > < / textarea >
< / label >
< /p >
< class p = "style5" >
< label for = "button" > < / label >
< input type = "button" name = "button" id = "button" value = "Submit" onclick = "submitForm ()" / > "
< /p >
< class p = "style5" > < / p >
< div id = 'msg' style = "font: arial bold 12px" > < / div >

< / make >
< p align = "center" class = "style8" > < br / >
< /p >
< class p = 'style8' > < / p >
< class p = 'style8' > < / p >
< class p = "style8 style12" > < strong > < br / >
< facilities > < / p >
< p align = "left" > < / p >
< h1 > < / h1 >
<!-end #mainContent->
< / div >
<! - InstanceEndEditable - >
<!-this element of compensation should immediately follow the #mainContent div in order to force the #container div to contain all the child-> fleet
< br class = 'clearfloat' / >

< div id = "footer" >
" < p align ="center"> < a href =" http://golfaroundtheworld.com "" "target ="_blank"> < img src ="file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/photos/GAW.png"alt =" "width ="153"height ="56"hspace ="50"border ="0"/ > < / has > < a href =" http://www.owendawsonphotography.com "target ="_blank"> < img src ="file:///Macintosh HD/users/owenpga/Desktop/New PGA SITE/photos/ody.png"width ="186"height ="56"hspace ="50"border ="0"/ > < /a > < /p > "
< h2 align = "center" class = "style6" > © Owen Dawson P.G.A.™ all rights reserved < / h2 >
<!-end #footer->
< / div >
<!-end #container--> < / div >
< script type = "text/javascript" >
<!--
var MenuBar1 = new Spry.Widget.MenuBar ("MenuBar1", {imgDown: "SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});})
->
< /script >
< / body >
<! - InstanceEnd - > < / html >
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
php code
<?
$fname = $HTTP_POST_VARS ["textfield"];
$lname = $HTTP_POST_VARS ["textfield2"];
$phone = $HTTP_POST_VARS ["textfield3"];
$email = $HTTP_POST_VARS ["textfield4"];
$address = $HTTP_POST_VARS ["textfield5"];
$state = $HTTP_POST_VARS ["textfield6"];
$zip = $HTTP_POST_VARS ["textfield7"];
$find = $HTTP_POST_VARS ['select'];
$goals = $HTTP_POST_VARS ["select2"];
$practice = $HTTP_POST_VARS ["select3"];
$learn = $HTTP_POST_VARS ["select4"];
$handicap = $HTTP_POST_VARS ["choisies5"];
$timeplaying = $HTTP_POST_VARS ["select6"];
$lesson = $HTTP_POST_VARS ["select7"];
$additional = $HTTP_POST_VARS ["textfield8"];

echo "$fname\n$ lname\n$ phone\n$ email\n$ address\n$ state\n$ zip\n$ find\n$ goals\n$ practice\n$ learn \n$handicap\n$timeplaying\n$lesson\n$additional\n;
mail (' [email protected]', "Owen Dawson PGA Contact submission form", "name: $fname\nLast name: $lname\nPhone number: $phone\nEmail: $email\nAddress: $address\nState: $state\nZip Code: $zip\nHow did you find me?") $find\nWhat are your goals? $goals\nHow much can you practice? $practice\nWhat would you like to learn? $learn\nWhat is your handicap? $ time handicap\nHow were you play golf? $timeplaying\nHave you never took a lesson? "$lesson\nAdditional Information: $additional\n ',"(de: [email protected]'); "
? >
< html >
< head >
< script type = "text/javascript" >
Window.OnLoad = function() {}
parent.messageSent ();
}
< /script >
< / head >
< body >
< / body >
< / html >

just before the closing head tag it is an editable region for the insertion of specific scripts on the page. Glance at this:

and place the script between the 2 comments.

Impossible to install the KB2744842 update, get 80072EE2 error code and have problems connecting to the Internet

Original title: 80072EE2 and KB2744842

Tried to install update Cumulative security for IE 9 for Windows Vista for x 64-based systems (KB2744842).
The installation failed, and now the internet connectivity is corrupt.

Errir received message is 80072EE2.

Tried several reboots, power/power on the router, ISP shows works, but cannot connect to the internet.

Help, please! And what happened to the phone support for Windows Update problems?

Hello

1 did you do changes on the computer before the show?

2. do you receive error messages about the inability to connect to the internet?

Work with the question about the installation of update KB2744842.

Method 1:

See the site:

Windows Update error 80072ee2

http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

Method 2: Install the update manually to the clean boot

Step 1: Clean boot

When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

Check out the link:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.microsoft.com/kb/929135.

Note: once you are done with the boot, follow step 7 in the article to set your computer to normal startup.

Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

Step 2:

Download manually on the site:

A security update cumulative for Internet Explorer 9 on Windows Vista (KB2744842)

http://www.Microsoft.com/en-US/Download/details.aspx?ID=34732

Addressing the issue with the help of an internet connection:

Method 3:

See the site:

Windows wireless and wired network connection problems

http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

You can also consult the site:

The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

You can visit the hotline:

Microsoft Technical Support phone numbers

http://support.Microsoft.com/kb/319726

data synchronized and merged from all of the added devices?

Is the first device I sighn in too the device main leader of all computers that will get the data? or they all merge together?
I mean, I have two computers, a netbook and a laptop.
The laptop is one that has all the correct addons and preferences and bookmarks, I just need things to sync on the netbook.
Thank you:
With regard to:
Melissa Cox.

The data of all connected devices will merge on the server and will be distributed to all necessary devices.

Getting data from the nodes of event data

Hi all

I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

Find attached an example. It is not the actual code but shows what I have to do.

Thank you

Dan07

Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

How to get data in the procedure after CREATE TABLE table1 AS SELECT * from table2

Hello
can any body tell me how to get the data in the new table created in the procedure. because it gives following error.
- Error (47,21): PL/SQL: ORA-00942: table or view does not exist
tableName: = "BCKUP_" | TO_CHAR (sysdate, 'ddmmrrrr');
tableDDL: = 'CREATE TABLE' | tableName. "AS SELECT * FROM Table1 where to_char(MSG_IN_TIME,''dd-mon-rrrr'') < sysdate - ' | daysNumber;
EXECUTE IMMEDIATE backUpDDL;
COMMIT;
DELETE FROM Table1;
How to select the data in the newly created table. as...
Select * from ". tableName;

Do not choose anything to get the number...

Just after backupDDL EXECUTE IMMEDIATE, simply refers to SQL % ROWCOUNT - who will be the number of lines.

Oh and DDL engages automatically, your commitment is redundant.

Satellite A65-S126: I get error codes 7 and 4 - need to replace the internal RAM

I was making mistakes first when I boot.
Windows has a file missing or currupted (isapnp.sys).
So I try to make a startup disk XP repair and while it is endearing to copy files, I receive other errror ' blah blah error code is 7 or 4.

I did some research on all three errors and every difficulty unique potintial ram bad or bad Bios settings. I tried to reset the cmos and I've updated since the last version of toshiba. Always the same thing.

I also replaced the ram with two sticks, that I had. The same problem. I think there must be some on board the cause of ram that I can get out the chip from the bottom and the laptop will always start and says it has installed 256.

Where and how we replace RAM or what do you think?

Thank you.

Have you tested the memory? You can use Memtest www.memtest.org which is a floppy disk or a CD.

Perhaps the error is just guessing what the problem is. File copy errors can also be caused by a scratched or damaged CD, bad CPU, defective HARD drive, faulty DVD drive or motherboard. If Memtest passes, then test the hard drive for bad sectors.

When installing CorelDraw X 5 I get a blank page and I can't continue the installation, the same phenomenon occurs when installing a web cam logiteck which gives (Vista SP @, 32 bit ver)

When installing CorelDraw X 5 I get a blank page of the installer and I can't continue the installation, the same phenomenon occurs when installing a web cam logiteck which gives (Vista SP @, 32 bit ver)

Hello

1. have you made changes on the computer before this problem?
2. do you get any error code or error message?

I suggest you to try the steps in the following Microsoft article and check if this may help.

Problems installing and uninstalling programs on Windows computers:
http://support.Microsoft.com/kb/2438651

Put the computer in a clean boot state, and check if that helps.
How to solve the problem by running the clean boot in Windows Vista:
http://support.Microsoft.com/kb/929135

Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

Hope the information is useful.

Do not get data in the target after the beginning of the session.

Hello
I applied the filter. source and target table are Oracle database tables. Source have data. Target of no data. I chose insert, update, commit as true in the properties of the target. Eventhough
After the execution, I do not receive data in the tables of the target. Please check below the images.
Thanks in advance,
A.Kavya.

Hello

Screen capture, I see you used LKM as well. Then, probably, you can start by consulting the table loading step $ CAN to see how many rows were loaded into C$ source table.

If you have data in C$ then next step would be to check the data loaded in I$ table. I can see screenshots that you set the false Frother so that your data can not go to E$. PS please check where your data falls to C$ I $ loading.

You can restart the interface and you can set the property 'drop of temporary objects' false so that C$ I $ table not deleted and are there for analysis.

It will be useful.

Thank you

Ajay

Impossible to get data of Httpconnection and analyze these data on the real device

Similar Questions

Maybe you are looking for