Thumb drives in Windows XP

Windows xp Pro USB key USB is detected but does not display the drive in Explorer or my computer. The USB key can be seen in Computer Manager with the assigned drive letter. The computer will detect and display the portable USB hard drive.

A bit of a"dagger in the dark;

Go to calculate Manager Disk Manager. Make sure that this shows a formatting. Try changing the drive letter to something not obliterated, say, the from '

Tom

Tags: Windows

Similar Questions

  • Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

    Hello

    Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

    I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

    Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

    Kind regards

    Andreas Ball

    Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

    The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

    Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

    Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

    complete list of supported products and the operating system:

    http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

    Renesas Electronics USB 3.0 Host Controller®
    http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

    Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

    What does this do?

    This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

    This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

    The products and operating systems (view all...)
    Model:
    VPCL213FX/B
    Operating system:
    Windows® 7 64-bit

    IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

    Important notes
    • During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights.
    • To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding.
    • It is strongly recommended that you print these instructions for reference during the installation process.
    Download and Installation Instructions
    1. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding.
    2. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference).
    3. Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation.
    4. The "User Account Control" screen, click 'yes '.
    5. On the screen "Select Country", select the country for the installation and then click on "next".
    6. To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next".
    7. The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation.
    8. The "Complete" screen, click on "Finish".

    Installation of the Renesas Electronics USB 3.0 host controller is complete.

  • Spectrum: Intel WLAN Driver for Windows 10

    I hope this isn't a disaster in the making.  Recently, I've had this laptop and have tried to keep everything up-to-date.
    I noticed it says to install two updates - we did it, we failed.
    The update that failed is titled "Intel WLAN Driver for Windows 10".  I tried to install this update several times now without success.

    Anyone has any advice on this subject?

    I thank you for your time and have a good day.

    Please try to install this driver provided CV... sp74902.exe (Intel Wireless LAN Driver)

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • USB Thumb Drive (UHYBS-064GH) format/write protection fault

    Hello

    Hoping for help.

    Bought a 64 b USB Thumb Drive (UHYBS-064GH), a private seller, but the point is brand new in packaging.

    When I tried to copy files through him, he maxed out at comments 45Gig and seems to have caused a clerical error. I was able to remove the majority of the cases, however on 5gig of them would not remove (in that they seem to have removed, until you updated).

    To counter this, I tried to "quick format", the drive (using Windows XP SP3), but the disc is write protected and I am unable to remove it.

    Spoke to a friend who told me that I should try a low-level format, which tried & it seemed to work, however when I insert the USB system indicates that the drive is not formatted & I would like to format. When you click Yes, I get the error 'write protected '.

    Was the question of the google machine & even tried to change registry settings, but also failed.

    So I hope someone out there has a solution for me (which does not include a big hammer & some anger management)...?

    Would it be possible that this USB drive is defective?
    In my opinion, you should contact the merchant and must replace it with another.

  • HP DeskJet 970cse driver for Windows 64-bit 10

    I have the same problem with the HP 970cxi.

    Windows x 64 10 find a driver for 970cxi, but when installing windows survey error message:
    "Windows encountered a problem installing the software driver for your device."

    Windows finds the driver for your device but encountered an error trying to install it.

    HP 970cxi.

    The a this device installation programs can not preform the installation at this time. »

    Under the DEVICES MANAGER printer has been added in the OTHER DEVICES section, and the QUESTION mark is above it.

    When I try to print in any application I get the answer I need to install the printer.

    I tried power and off the printer and change the USB ports but he wasnnt solve the problem.
    Printer has been normally normally in Windows 8 x 32 fey days before.

    Please give me link to any driver (.inf) to install, and print documents.

    didn't need to be original for 970cxi, only it works so I can print text documents.

    Thank you very much for your help.

    And the printer is not in offline mode. Driver no longer works in Windows 10 x 64. Thank you

    Welcome to the HP community @Hp970cxi,

    I saw your post on your Deskjet 970cxi not working only not with Windows 10. I checked the supported printers and drivers for Windows 10, and this unit can be installed with the driver from Windows Update here: installation and using the built-in Windows print driver

    If the device does not connect and print, you may need an improved unit to work with the operating system more recent (Windows 10). If you wish to contact HP to see what your options are, I'll leave their contact information below.

    You can also try to run the tool print and scan doctor and the HP printer install wizard for Windows to see if they can help you print.

    Details of HP:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    I hope this helps.

    Testify of my response to your concern today by clicking the thumbs up below!

  • HP Photosmart C4680: HP Photosmart C4680 driver for Windows Vista 32-bit

    I can't find the HP Photosmart 4680 for Windows Vista 32-bit driver. The HP Web site has only the driver for Windows 7 and newer. I tried to install this driver, and obviously it did not work. Can anyone help? Thanks in advance.

    HI @rtraveler,

    I understand that you need drivers for Windows Vista. I'd love to help you.

    I have provided the link to the Windows Vista drivers.

    All-in-one HP Photosmart C4600 series printer full feature software and driver.

    If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

  • The thumb drive.

    Is it possible to install an OS (Win7 or XP) on a thumb drive/memory stick?

    Have a memory stick 64gig. It is recognized as a disk using a 3rd party boot program partitioning.

    But install win7 the reader isn't here in the choice.

    It has been formatted in NTFS and defined as an active player in the partitioning program.

    Win7 sees regular HDs when they are formatted and active the value of this same partitioning program.

    A mem-stick is not allowed to be used as C: drive?

    Unfortunately, no, you must install the drive of Windows 7 or XP which is installed inside your computer.

    Customers who have access to versions of client of Windows such as Windows 8.1 Enterprise volume license can use specialized USB USB keys they can install Windows on Windows called To Go.

    Unfortunately, Windows Enterprise 8.1 is not available at a retailer

  • ... the thumb drive work lost HELP

    I was organizing my USB in putting things in the files, I used the cut & paste, today when I plugged my thumb drive, Miss me more than half of my work. where at - it go? can I get it back?

    Hi Amysuzanne,

    1. What is the brand and model of the flash player?

    2. did you transfer the files in the flash player or have you used the files of the external flash player?

    3. have you checked if some files are hidden?

    Insert the flash drive and open folder options, you can consult the steps mentioned in the article.

    Show hidden files

    http://Windows.Microsoft.com/en-in/Windows7/show-hidden-files

    If you are unable to the recover files even after display, there might be a chance that the files may be lost or damaged. You can find some third-party software using the favorite search engine to retrieve these files.

    Note:  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    Hope this information helps. Provide more information so that we can help you.

  • I want to transfer my files to my external hard drive free windows click on my mac, it recognizes the drive but I can't nothing or see the files. Any help is appreciated

    I need to transfer my files to my external hard drive free windows click on my mac.  I can see the drive but cannot do anything or transfer.  any help is appreciated.

    The drive does not appear in the Finder?  Do you get an icon for it on your desktop?

    You say that it recognizes the drive, how exactly, what is the point?

    What happens when you try to use it?

    How the drive is formatted?  Is it encrypted?

  • IDT audio driver for Windows XP

    Hello

    I have a DV7-1050ef downgraded to XP. I know that HP does not support Windows XP more.

    Anyone found yet an IDT audio driver for Windows XP? I have already tried many, none of them worked.

    I also installed the UAA kb888111.exe driver. Do I need to install anything else before the driver IDT?

    Thank you!

    You might try this one:

    http://www.VersionTracker.com/dyn/moreinfo/win/196800

    I've heard it works, but never tried it myself.

  • 350g 1: IDT driver for windows 10

    High-definition audio codec, IDT does not work properly in windows 10 is there an updated driver for windows 10?

    Hey, guess what after that update novmber widows 10, that the problem is now solved very well the works of idt hd codec.

  • Qosmio F50 - 10 M - infrared driver for Windows 7 64 bit missing

    I want to change my OS from VISTA (32 bit) to Windows 7 (64-bit), I'm on downloading all the drivers needed for the proper functioning of my laptop in the future.

    When the choice of my laptop (Qosmio F50 - 10 M) and operating system (Windows7 - 64 bit) there is no more infrared driver (for my remote).

    Do I need to have a driver for the infrared interface (which I have and is downloadable with VISTA32)?
    If Yes, where can I get it?

    Thank you very much for the help!

    Kind regards
    starmind

    Hi Starmind_1,

    I n t have remote to test my Qosmio F50 so that I can t but if there is no driver for Windows 7, I guess that the 64 bit Vista driver should work fine on Windows 7. In addition most Vista drivers also work on Windows 7 so it s worth a try! :)

    But from my own experience, I can say that Windows 7 64 bit works like a charm on Qosmio F50 and in my opinion better than Vista. I used all the drivers from the official website of Toshiba and don t have problems.
    Everything works great! :)

  • No Apple USB driver in Windows 10 Device Manager

    Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

    I tried

    • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
    • restarting my computer
    • disabled my virus protection software
    • synchronization with different strings (some Apple, others not)
    • my devices restart and try again
    • Uninstalling iTunes and reinstalling
    • Uninstalling iTunes and goes back to and older version
    • make a Windows system to a restore point when I could synchronize my devices

    My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

    Anything else I can try?  I'm out of ideas.  Thank you!

    This can help:

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

    Refer to the section:

    If you are using a Windows PC

    and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

    Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

    Troubleshooting problems with iTunes for Windows updates

    especially the section:

    Remove and then reinstall iTunes and other software components

  • Satellite T135-S1309 - audio driver for Windows XP

    I have a Satellite T135-S1309 and I can't find the audio driver for windows XP in toshiba Web site or on the internet.

    Please if anyone can help me I will be grateful.

    Hi, mate

    can you post what's installed on your laptop card? Realtek? You can check this in the Device Manager

  • HP EliteBook 850 G3: No audio for no built in speaker and headphone with jack after driver and windows update

    Hello

    I just made some updates driver and windows (windows birthday) and after installation I have not any sound with the built-in spaker or with my headphones plugged with one taken more. But with a usb headset it works!

    When I go to the window of Windows playback devices there is no device present.

    I already update the Audio drivers and reboot to run the tool in solving audio problems in Windows, but nothing new, it does not.

    Gauthier

    Hi Gunthar,

    Give the driver following a shot

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

    This driver solved the same problem we had with our Elitebook 840 G3

Maybe you are looking for

  • Quality mediocre speaker after moving my Mac Book Pro

    Hi all Was moving around my Mac Book Pro to show my sister home, then all of a sudden the sound quality of the speakers has deteriorated and that he was not as crisp as before. Should I just allow the speaker to stabilize by asking my Mac or should b

  • HOW CAN I MAKE MY COMPUTER BURN CDS AGAIN?

    I TRIED TO BURN CD, BUT FOR SOME REASON ANY, WHENEVER I HAVE IT TRY STARTS TO BURN, BUT THEN I GET AN X NEXT TO ALL THE SONGS AND THE ERROR MESSAGE ME SAID TO TRY TO CLEAN THE CD USING A NEW ONE OR DO BURN AT A LOWER SPEED AND I ALREADY DID ALL THAT

  • XPS 8910, bi-ecrans, Nvidia GTX 970?

    I just got a new 8910 XPS, well. But the video card (Nvidia GeForce GTX 970) only on the card, DVI - D video output. I want to connect a second monitor, DVI - D or VGA input. There are a lot of other jacks on the rear panel, several HDMI, DP (Display

  • Does not appear internet image on ios

    HI experts,Developed with adf 11.1.2.4_39_64_64 mobile jdk1.6.0_51I have amx components of image on line table referenced on url Web siteseems on anroid correctly but does not appear on ios platform. Deployed with xcode5.1I Set image source on so inp

  • The OS restart every night

    I think some interaction with the host and VMware operating system is causing the host OS to restart every night, and therefore the VMware OS through a hard reboot.I am running OSX 10.9.5 on a MacBook Air with VMware fusion 7.1.1. I am running Window