Impossible to get on-time performance real ESXi 4

Similar Questions

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• How can I get information from performance on disc with vFoglight 6.5 latency?

  Can someone tell me where I can get info from performance on disc with vFoglight 6.5 latency?

  There are also alarms that deal with the latency of disk. You are looking for a report or dashboard? Check the alarm Viewer and define a filter on the "latency". This will show you all the current latency time, then you can explore the host or logical unit number that is having the problem.

• SSD Intel DC P3700 NVMe and performance in ESXi 5.5.

  Hello

  I have 2 HP Proliant DL380 G9 with a 2 TB Intel P3700 NVMe SSD PCI - e card each.

  To put a virtual machine on these cards, I don't get the performance I expected.

  My basis for this is a Workstation Windows 8.1 with a 800 P3700 Go card for OS/workspace based on a Supermicro X10DAI motherboard.

  When I benchmark P3700 of this workstation, I get results and performance as expected.

  During the calibration of a virtual machine on a data P3700 store, I get waaay lower results, especially for workloads sequential.

  Change controller of paravirtualised, results changes a little, mainly best write performance, but the results are always a way weak.

  I use the following driver for P3700, downloaded from the vmware.com website:

  Is - 1.0e.0.30 - 1vmw.550.0.0.1391871.x86_64.vib

  Screenshots of P3700 on Windows desktop / VMWare workstation VM / ESXI 5.5:

  

  
  

  
  

  Paravirtualised:

  

  
  

  Any ideas?
  

  Now we are talking about, the drivers are definitely the big question here.

  Pre-release of Intel driver: intel-nvme - 1.0e.0.0 - 1OEM.550.0.0.1391871.x86_64.vib, did the trick.

  The results are always a little strange when it comes to performance and results in read/write / values are not yet 100% where I want them, but ATTO finally shows sequentially results above the limit of 600/800 MB I saw with vmwares pilot.

  Storage of the weak watch anvil utilities score both on driver LSI_SCSI and paravirtualised. I'm not shure why, but outcomes are improved in a way.

  I guess than the version driver gold, and maybe a combination with ESXi 6 improve it more.

  I consider a little more.

  Intels pre-release driver with LSI_SCSI controller:

  

• How can I get the time to a server in JavaScript? Thank you

  Hello I have implemented a JavaScript from Adobe that expire after a certain date. However, the script asks both on the computer that can be changed. I thought that maybe I could get the time from a server NTP, NIST, which cannot be changed. However, I can't understand how to call and get the time server using JavaScript. I heard that JavaScript is client-side, but there is also a side server as well. Is it possible to code in Adobe Acrobat DC? I heard also that time of the OS is different maybe through Microsoft server. Could I get the OS somehow time?

  I've tried ActiveXObject which doesn't seem to work and in a desperate trial of windows.open ("Internet address"). Other thoughts on attempts? Thank you very much!!!

  Other strategies are also welcome having the exact time of the real.

  -Christmas

  The main problem with anything that is based on JavaScript is that it can be turned off easily, in order to place you in the document code will not work. Or a PDF Viewer that can't stand not JavaScript can be used. A form can submit to a server that can return a response that could include the current time.

• How to get the time of browser in the project template

  Hello
  
  With Jdev 11.1.2.3
  
  How can I get the time to browsers in the model project?
  
  Groovy accesses the browser time?
  
  I have to do some calculations (based on the time of the browser) for each row returned by a query. I think it would work if I could get time to groovy browser because I was able to perform the calculation in the SQL of my View object.
  
  But I can't seem to find how to get browser in Groovy times? Any ideas?
  
  The other option, is to use JavaScript to get the date of the browser, that should work, but the lines are displayed from a query in an AF:table, I need to apply the calculation to set the color of the table date field based on the calculation of date browser. So a java method should run for each row returned and displayed in the table.
  
  What senses seem to better you experts? I seem to be in a catch 22 here... Any ideas? And there are items that you can reference?
  
  Thanks for the help.
  
  Published by: 966952 on March 11, 2013 05:41

  As I said, you can set the inlinestyle of the field you want to change the background of a method of bean that return a style as appropriat

  // Bean code: the bean is set as requestScope bena in adfc-config.xml
  import javax.el.ELContext;
  import javax.el.ExpressionFactory;
  import javax.el.ValueExpression;
  
  import javax.faces.application.Application;
  import javax.faces.context.FacesContext;
  
  public class TableInlineStyleBean
  {
      public TableInlineStyleBean()
      {
          super();
      }
  
      // get a value
  
      private Object  getValueExpression(String name)    {
          FacesContext facesCtx = FacesContext.getCurrentInstance();
          Application app = facesCtx.getApplication();
          ExpressionFactory elFactory = app.getExpressionFactory();
          ELContext elContext = facesCtx.getELContext();
          ValueExpression lCreateValueExpression = elFactory.createValueExpression(elContext, name, Object.class);
          return lCreateValueExpression.getValue(elContext);
      }
  
      public String getCalculateStyle()    {
          //use expression from table or any other EL to do the calculation
          String val = "#{row.CommissionPct}";
          Object obj = getValueExpression(val);
          String color = null;
          if (obj != null)        {
              Number n = (Number) obj;
              // return red as background if CommissionPct > 0.2
              if (n.floatValue() > 0.2)
                  color = "background-color:Red;";
          }
          return color;
      }
  }
  

  And in the af: table a column (for example CommisionPct)

  Timo

• Impossible to get 'notes' of the virtual machine

  I tried to use a powershell script to get information from the virtual machine. I can get VMHost, VMname and GuestVersion using the script in the following, but failed to get the notes of the virtual machine. Anyone know why I can't get notes, please help me with that. Thank you in advance.

  report = @)
  foreach ($vmView in (Get-View - ViewType VirtualMachine))
  {
  $report += $vmView. Select-Object @{Name = "$vmhost"; Expression = {($vmView.Runtime.Host Get-View).} Name}},
  @{Name = "VMName"; Expression = {$_.} Name}},
  @{Name = 'Notes'; Expression = {$_.} Description}},

  @{Name = "GuestVersion"; {Expression = {$vmView.Guest.GuestFullName}}
  }
  $report | Sort-Object VMName-descending | Export-Csv "d:\vm_GuestVersion.csv" - NoTypeInformation

  There is no need to do it with the cmdlet Get-View.

  You can do

  $report = @()foreach ($vm in Get-VM){    $report += $vm | `        Select-Object @{Name="VMHost"; Expression={($_.Host).Name}},            @{Name="VMName"; Expression={$_.Name}},            @{Name="Notes"; Expression={$_.Description}},            @{Name="GuestVersion"; Expression={$_.Guest.OSFullName}}}$report | Sort-Object VMName -Descending | Export-Csv "d:\vm_GuestVersion.csv" -NoTypeInformation
  

  If you want to do with the cmdlet Get-View for any reason, you can do

  $report = @()
  foreach ($vmView in (Get-View -ViewType VirtualMachine))
  {
      $report += $vmView | `        Select-Object @{Name="VMHost"; Expression={(Get-View $vmView.Runtime.Host).Name}},
              @{Name="VMName"; Expression={$_.Name}},
              @{Name="Notes"; Expression={$_.Config.Annotation}},
              @{Name="GuestVersion"; Expression={$vmView.Guest.GuestFullName}}
  }
  $report | Sort-Object VMName -Descending | Export-Csv "d:\vm_GuestVersion.csv" -NoTypeInformation
  

  But note that as you need a view of the GET each time for the host name, performance will suffer.

• Query to get the time MIN

  Hi all.
  
  How can I get rank with MIN time (DESPITE DAY) (for the first six hours 08:00-14:00, AND the NEXT 6 hours 14:01 to 20:00)
  If what follows is my sample

  03/05/2012 17:30:00
  04/05/2012 17:00:00
  10/05/2012 18:00:00
  12/05/2012 08:00:00
  10/05/2012 07:00:00  
  03/05/2012 11:00:00  

  my result should be at first six hours 07:00 and 17:00 followed by six)
  
  
  Thanks in advance for any help

  Personally, I do not like to convert dates into strings and vice versa. I think that both arithmetic and precise the date date would perform better.

  Here's an alternative:

  with t as (
    select to_date('03/05/2012 17:30:00','DD/MM/YYYY HH24:MI:SS') as dt from dual union all
    select to_date('04/05/2012 17:00:00','DD/MM/YYYY HH24:MI:SS') from dual union all
    select to_date('10/05/2012 18:00:00','DD/MM/YYYY HH24:MI:SS') from dual union all
    select to_date('12/05/2012 09:00:00','DD/MM/YYYY HH24:MI:SS') from dual union all
     select to_date('10/05/2012 08:30:00','DD/MM/YYYY HH24:MI:SS') from dual union all
    select to_date('03/05/2012 11:00:00','DD/MM/YYYY HH24:MI:SS') from dual
  )
  select to_char(min(dt) keep (dense_rank first order by dt-trunc(dt)), 'HH24:MI:SS') hh24miss
  from t
  group by trunc((extract(hour from to_timestamp(dt))-2)/6)
  order by 1;
  
  HH24MISS
  --------
  08:30:00
  17:00:00
  

  Explanation:

  -Use the EXTRACT function to get the time. The date must be "converted" in a timestamp date because ANSI does not have the component "hour".
  -Subtract the difference of two hours from the time. This will change the interval from 2-8 to 0-6, 8-14-6-12, etc.
  -Divide by 6 and truncates the result. This will give 1 what it is from 08:00 to 13:59.59 hours.
  -Group by this result, which will all split into groups of ranges of 6 hours.

  -Now, in each group, so the component "hour": TRUNC (DT) is the date with time set to 0, DT - TRUNC (DT) is the component "hour".
  -Ordering by the component "hour", download the first date that corresponds to the first component of the time.

  Published by: stew Ashton on November 16, 2012 17:38

• Flex Mobile Application and get the time zone

  Hello

  I need to know the time in a Mobile application in order to perform some calculations.

  The problem is that I need to know the time from the GMT.

  Is there anyway to zone set by the user to detect or somehow get the time?

  not tried but it's any help

  Date

  timezoneOffset : number

  [read-only] The difference, in minutes, between the time universal (UTC) and the local time of the computer.

• get utc time in oracle without restarting the session

  Hello world
  
  I need to get utc time in oracle without restarting the session. Now I get what type:
  
  Select double sessiontimezone;
  
  In the new session, I'm sessiontimezone exact value, for example, I live in Istanbul, Turkey and there + 02:00. But last Saturday, this value is passed to 03:00. If a session that was created only, when I call sessiontimezone, back + 03:00, this is true.
  
  But, if I call sessiontimezone, I see + 02:00 in a session that created it before last Saturday night.
  
  What should I do to get the value real sessiontimezone without restarting the session?

  do you want to time UTC, you can use...

  select systimestamp at time zone 'UTC' from dual
  

  This will give always the hour UTC

  Ravi Kumar

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• How to get taken time stated in the IO in the sequence editor?

  Hi all

  Is it possible to get the indicated default time NI Semiconductor Test Operator Interface OR in the sequence editor?

  

  Are there any expression in sequence editor that can get this time taken in the operator Interface?

  How can I include this time taken in the STDF generated by the transformation in the result sequence editor?

  Thank you

  Socket's operating time is stored in the TestResultsPropertyObject. To access this object is via the MainSequenceResult parameter in the Plugin model - USE fact entrypoint. The TS. TotalTime property records the total amount of time that required to run your test code MainSequence recall. It comes to the value included in the default reports.

  The OI shows the average decision-making time of execution of the whole lot, gets it from the Manager of semiconductor modules.

  I hope this helps.

• I'm looking for a time sound real when system starts in a PDA?

  Hi all!

  I want to create a program that can be useful as a meter away. I have the PDA with microphone and speaker, so I can use it as sonar in the audible range.

  The problem is when I try to find the point in time when my acoustic impulse starts ringing. It is very important to know the exact time of the impulse starts as it affects the quality of recognition reflected pulse.

  If I use special functions such as 'Get System Time' or 'Ms timer value' I usually get incorrect results.

  First my program starts to save, and then after the start of the pulse of 100 ms, then after 200 ms program will stop recording and saves the data.

  I get RecStartTime, SndStartTime, so I can calculate how many data points in my record are before Pulse: (SndStartTime - RecStartTime) * 44, 1.

  But I always find start impulse in my test folder much later.

  So I don't think that "Mrs. timer value" can be used to know exactly the moment of time of sound starts (really starts).

  How can I avoid this problem?

  Thank you.

  I'm not really sure that a Microphone and a speaker are sufficiently precise a method to measure the distance.  Perhaps you should consider a hobby ultrasonic sensor.  I used a lot of these things in College and it worked very well.

• get the time of waveform - increase accuracy?

  Hi I am trying to measure a voltage and take the voltage and time to specific blood pressure and place everything in a pure and simple to read the file.  I had success with the foregoing, however, when we look at the data, the timestamps are not precise enough.  It's mapped data that appear to show only the 1 significant digit, and I need a lot more specific than that.

  Is it possible to use the "get Waveform time Array.vi ' which will appear more precision when obtaining these components?

  Version is 8.6

  For those who are not idiots and care to know the solution, the drafting of a worksheet, Excel truncates data.  I don't know why the data has been lost, but there is no way to recover it in Excel.  In my case, the resolution of valuable time has been lost.  However, writes to a text file can address this problem.

• How to get the time based on the time zone?

  Hi all

  I try to get timestamp based on the time zone I assign in the computer... for example right now I m CA, if I change the time zone of the computer IS, and use time get Sec.vi, I always get time to CA.

  and not the ACC at EST time... How can I get the time according to the time on my laptop?

  Think I remember vaguely that LV reads this parameter when loading, then try to restart LV after changing the time zone and see if that helps.