Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

Similar Questions

• Satellite P50-B-103 - to connect my HDMI output on a VGA monitor

  Hi all

  I just bought a satellite * P50-B-103 *, which has a HDMI output and I want to connect it to an external VGA monitor.

  I thought that I just need to buy a HDMI - VGA Converter, but the buyer was told that Toshiba, unless this model, is not ready to connect to a VGA monitor, although I use a converter.

  Is it true or I can connect my laptop to the vga monitor using the converter?

  Thanks in advance,

  Charly

  It remains that HDMI provides digital signal and analog support port VGA (RGB) signal.

  To be honest, I read a lot of articles on these adapters and converters, but in many cases, these converters are useless.

  So it s no matter if your laptop was manufactured by Toshiba or another manufacturer.
  ITSA the question of the standard of caught signals supported by each port.

• Satellite U500 (PSU52E) - where to get a replacement screen?

  My laptop computer screen of my Satellite U500 (PSU52E) broke. Can someone recommend where I can buy a replacement screen?

  Thank you

  Hello

  You can get a replacement from an authorized service provider screen:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Guys can order all original spare parts in order to get a spare part of Toshiba compatible and original guys. :)

• Impossible to get PRTSCR DEL + keys to work on the Satellite A100

  I have the Satellite A100 - 232 PSAA2E. Bought in Greece... If some of the keys have a second role - for Greek letters. Especially not a problem.

  However... I can't get led (top-right) to work and same (3buttons on the left led) the print. Is there a setting to change or is there another way to remove and print screen?

  Your ad is somewhat confusing. Satellite A100 is pretty old laptop so I do not understand how you have this problem now.

  Everything was ok in the past?

  As far as I know you can change the keyboard input language, but this has nothing to do with DEL or PRINT key features.

• Qosmio G40 XP MCE - impossible to get an IR receiver to work.

  Hello.

  I have a G40 with XP MCE, but I can't get an IR receiver to work. I would like to use the remote control. You know which driver to use to make this work?

  Thank you

  I think its called the pilot consumer infrared (CIR).

• Impossible to get Windows Vista Mail to work since the installation of FireFox

  In recent weeks, been unable to access the Internet or use any messaging service using IE8. Internet Explorer opens not - except in safe mode with network. I spent several hours to solve this problem without success. Then as a last resort, I downloaded and installed Firefox and in normal mode the page Firefox came and I have full access to the Internet and Microsoft Hotmail - however I can't get Windows Vista Mail to work.

  WMUtil is very easy to perform and can fix things.  Especially if you got rid of McAfee.  You may still need to remove your e-mail account and then add again, but it's also easy to do.

  Many people find Thunderbird much more preferable to alternatives to Microsoft.

  Steve

• RV180 router: impossible to get Inter-VLAN routing to work.

  I've been hit in this now for two days and just can't get Inter-VLAN routing to work on this router.

  Here is the place is:.

  Updated to the latest firmware of Cisco (1.0.1.9).
  From default settings, I added 2 VLAN as follows:

  VLAN (id = 1) default: dhcpmode = port IP=192.168.1.1/24 from server 1
  VLAN vlan2 (id = 2): dhcpmode = port IP=192.168.2.1/24 from Server 2
  VLAN vlan3 (id = 3): dhcpmode = port IP=192.168.3.1/24 Server 3

  (without link)
  WAN port
  |
  Routing/NAT
  |
  --------------------------------------
  VLAN ip 192.168.1.1 192.168.2.1 192.168.3.1
  name of VLAN by default vlan2, vlan3
  VLAN id ID = 1 ID = 2 ID = 3
  Inter-VLAN only routing Yes Yes
  Excluded excluded unidentified 1 port
  2 excluded excluded Untagged port
  Port 3 unmarked excluded except
  Port 4 (not interest) without excluded tag excluded
  ---------      --------     --------
  1 2 3 Port port
  |              |            |
  AdminPC PC3 PC2
  192.168.2.191 192.168.3.181

  PC2 is assigned an IP address of 192.168.2.191 (DGW = 192.168.2.1) - OK
  PC3 is assigned an IP address of 192.168.3.181 (DGW = 192.168.3.1) - OK

  (IP 192.168.2.191) PC2 can ping 192.168.2.1 and 192.168.3.1 - OK
  (IP 192.168.3.181) PC3 can ping 192.168.3.1 and 192.168.2.1 - OK

  BUT...
  PC2 cannot ping PC3 - don't DO NOT WORK
  PC3 can not ping PC2 - don't DO NOT WORK

  (does not work in gateway and router Mode)

  CAN SOMEONE HELP ME UNDERSTAND WHY?

  Your help is very appreciated.

  I bought this unit specifically because she supported routing inter - VLAN!

  Vlaminck

  ---------------------------------------------------------------------------

  Support information:

  Screenshots:
  Belonging to a VLAN:
  VLAN ID Description Inter VLAN device Port 1 Port 2 Port 3 Port 4
  Routing Mgment
  1 default disabled enabled unmarked excluded excluded unlabeled
  2 active active VLAN2 excluded unmarked excluded excluded
  Unmarked 3 VLAN3 active active excluded excluded excluded

  Several subnets VLAN:
  VLAN ID IP address Subnet Mask DHCP DNS Proxy Mode status
  1 192.168.1.1 255.255.255.0 DHCP Server enabled
  2 192.168.2.1 255.255.255.0 DHCP Server enabled
  3 192.168.3.1 255.255.255.0 DHCP Server enabled

  Routing table (Bridge Mode)

  Destination Gateway Genmask Metric Ref use Interface Type flags
  127.0.0.1 127.0.0.1 255.255.255.255 1 0 0 static lo upward, gateway, host
  192.168.3.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg3 to the TOP
  192.168.2.0 0.0.0.0 255.255.255.0 0 0 0 dynamic bdg2 upward
  192.168.1.0 0.0.0.0 255.255.255.0 0 0 0 static bdg1 to the TOP
  192.168.1.0 192.168.1.1 255.255.255.0 1 0 0 static bdg1 upward, gateway
  127.0.0.0 0.0.0.0 255.0.0.0 0 0 0 lo dynamic

  Routing table (router Mode)

  (Ditto)

  Hello

  It's not because the pings are allowed on the same subnet that they come from a different subnet.

  You probably have a firewall problem windows software because that by default, it removes a different subnet icmp echoes.

  Concerning

  Alain

  Remember messages useful rate.

• Impossible to get a select statement to work

  Hi guys, I tried to get this select statement to work. But it won't be fair
  
  SELECT THE "GEN".
  WHEN'M ' THEN 'MALE '.
  WHEN 'F' THEN 'WOMAN '.
  END OTHER 'UNKNOWN '.
  THE EMPLOYEE
  
  That run, however, I just get unknown ranks.
  
  Summer racking me my brains on this simple thing for a half hour :(
  
  Thanks :)

  HC wrote:

  Otherwise, if I have not ' around GEN, then it says it's an invalid identifier.

  Who says table used has no column named gen. You use SQL * more? If so, publication:

  employee of ESCR

  This will give you a list of columns in the table. Make sure that gen is one of the columns.

  SY.

• HP Pavilion TouchSmart 15-n029: HDMI output not working not not on HP Pavilion 15

  Hi guys, I'm new here on the HP Forum.

  My problems started when I got my new laptop and I HATED windows 8.

  If one of my friends had a drive with Windows 7 above.

  After installation nothing worked, no WiFi, USB, HDMI and so on.

  I have serched the days for new drivers and found most of them on the website of HPs.

  But I was not disabled to find a job for my HDMI output driver.

  You guys can help me with this?

  Jesper Forsberg - Sweden

  Hello:

  The only suggestion I can offer would be to try the AMD graphics driver, if you don't have already done.

  Your laptop is not supported by HP for W7 and especially not supported for 32-bit operating systems.

  http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2032

  As a last resort, try to manually install the W7 x 64 graphics driver from the support page and the driver of your laptop (sp66999).

  I explored the driver file, and there are 32-bit included in this file drivers.

• Satellite 1130-Z31: impossible to get 1600 x 900 on the second monitor

  I have a Toshiba Satellite 1130-Z31 (an old, but everything works well).

  Now, I have attached a second monitor with a native resolution of 1600 x 900 pixels.

  I put the second screen resolution to 1600 x 900, it is accepted.

  However, the image on the second monitor is ugly, and the external monitor´s what OSD says it gets 1440 x 900 pixel laptop computer signals.

  It seems that Toshiba sends an image with a lower resolution on the whole.

  I installed the latest graphic driver - no change.

  Or would it be a problem with a bad quality VGA cable or almost?

  Any ideas?

  Thank you
  Turtle

  Hello

  Unfortunately, I wasn't able to find the info which resolutions are supported for external screens, but if you can't get 1600 x 900 pixels which means that this resolution is not supported by the graphics card.

  What video port are you using? VGA 15 pins port maybe?

• Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

  I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. After cloning, the next problem is the Toshiba to accept DSS. Make me 2 errors: if I change the boot mode in the UEFI I get an error "check media prescence.

  If I change to the CSM, I get a PXE - MOF - exit Intel PXE ROM. am using the latest version of the BIOS, ver 1.9. It is; s been proposals to downgrade the BIOS to ver 1.2 but when even did not do this. Any ideas on what I can do? Feeling puzzled and irritated and really regret my decision to buy a Toshiba

  Sorry, but I must ask you this question: is recognized by the BIOS of SSD?
  Have you tried to install original recovery image on it?

  I ask this question because I use Samsung SSD on my laptop older satellite and it works without any problem.

• Satellite L750-1NG - impossible to get into the BIOS

  Hello team,

  I've recently updated my Toshiba BIOS of v3.0 to v3.6 and I am not currently able to access BIOS. I don't see a splash or the other screen. Except that my computer works very well. I have a Satellite L750-1NG and running Windows 7.

  Thanks in advance for you help. :)

  Post edited by: welika

  Hello

  Have you tried to press F2, immediately after the laptop was turned on?
  Press F2 repeatedly in the line.

  Otherwise I recommend starting the utility HWSetup from Toshiba. (All programs-> Toshiba-> Utilities-> HWsetup)
  Here you can change some settings of the BIOS like him setting the Standard (default).
  I think you'll need spend the quick start the normal start because you said that you can not see the Toshiba start screen.

• Satellite L500 - impossible to get a wireless modem to work

  Optus modem crashed computer and would be not recognized as being connected, wireless under tension and telstra said also there that modems are not compatible with windows 7. No one including toshiba seem to know blame the new windows 7, had computer 3 weeks and can not use it! someone help me please.so frustrating.thanks

  Post edited by: shanestar
  i'm sure there must be a compatible wireless modem and servers of the program to run that works.

  > Wireless under tension and also says telstra modems that are not compatible with windows 7.
  Sorry mate but I really don t understand your question
  The wireless network card that is installed on your laptop is fully compatible with Win 7 and the drivers are located on the Toshiba WLan portal.

  If you are talking about a 3rd party modem, then I must say that you are wrong here if you have problems with a device any 3rd party then you should get in touch with the manufacturer in your case with modem manufacturer

• Satellite Pro A120 - impossible to get a PCMCIA card work

  OK, I have a problem with cardbus (xp SP2) of my Satellite Pro A120.

  I use the cardbus slot to add conections firewire via an IEEE 1394 cardbus card and have been doing this for a long time. The other night, my computer came into hibernation with the card still in the slot and still in use, and when I tried to use it the next day, the card wasn't working at all.
  So I thought that had died on me and has brought another, this one to be exact [http://www.newegg.com/Product/Product.aspx?Item=N82E16839314003].

  When I plug the new card into the slot, windows starts the installation add something new but can't find the driver, nothing on the CD provided, and it does not conect to windows update to find an ethier. Thus, the new card does not work and do not settle, it appears just with! next to pci device.

  I have searched all over the internet to find the driver, read the manual etc. I even did a fresh install of windows so that he could find the drivers but nope.
  The only thing I can think is the slot does not except 32-bit cardbus, but in my manual it says this:

  «The computer is equipted with a pc card slot which can accomedate type II card.» Any pc card that meets the standards of the industry can be installed. Housing supports 16-bit pc cards, including pc cards 16 multifunction card and cardbus pc cards. CardBus supports a new standard for 32-bit pc cards".

  Any help please

  Thank you

  > I can't find drivers anywhere!
  Usually, it takes the CD with drivers with the product. So if you don't have it try to find the driver on the manufacturers support page.
  Try with this one http://www.belkin.com/support/product/?lid=en&pid=F5U222

  Good luck!

• Satellite L875D - an another GPU for Dual HDMI output possible?

  My L875D Satellite has a loose VGA output and I can get is more a third monitor to display, which leaves me with just the screen of the laptop and a second monitor - the computer screen is too small for my needs, so I would get my other 27 "monitor in service yet.

  Is it possible to install a different graphics card that came with the laptop? (AMD Radeon HD 7520G) I'd like one that allows me to connect two HDMI screens that extend, rather than duplicate.

  What am I looking for and it is possible to install myself?

  Thanks in advance for the advice,
  JO

  > Is it possible to install a different graphics card that came with the laptop?
  No, it is not possible to replace or update the graphics card.

  > I'd like one that allows me to connect two HDMI screens that extend, rather than duplicate.

  I recommend to use an external device, for example a * Dynadock * which would allow you to use additional external monitors.