Impossible to get to start FS2004

Similar Questions

• Windows media center m7350n: my computer refuses to get past start of windows blue screen

  Office refuses to make it past the windows blue screen with the words "starting windows" my Windows media center what do I do in order to get to start up again.  I did a few system recover test with these results. "

  Failed, test: test Shortself, Hd521-2w error code.  He also said that he would not recommend a system recovery.  This problem started one evening when my windows media center Office said that it had set a file.  How can I fix my desk as it is passed, the windows startup screen

  Skulldragon7

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your PC not start and I wanted to help.

  I wish I got good news for you, but I did not, as it sounds a bit like the hard drive has failed, what is to be expected if this PC XP - era still has the original drive.

  We have a few troubleshooting steps to test the drive but they only work on recent PC.

  What could work is by pressing ESC, or F1 or F2, when you start to see if one of these enter you a Setup screen, and if they do, choose to run the diagnostics from there to go to disk.

  If the drive has failed, there is bad news (sorry!) -in that HP long leaves Jersey recovery media for XP - era machines, so there is nothing you can order from HP to restore your PC to a new drive.

  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  And if not enough bad news, I guess that the hard drive in your XP machine has something known as an IDE interface.  You can tell by looking at the back of the car where the data cable connects.  If it is a large flat cable (about 2 inches wide) and there are a bunch of small pins where it connects on the disc, then it IS an IDE drive and those who are practically impossible to find, as the industry player opted for SATA disks making a few years back.

  Sorry... but it's time to think seriously to switch to a newer PC.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Impossible to get Vista SP2 installed

  Impossible to get SP2 to install on my windows vista 32 bit

  Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  Service Pack 2 for Windows Server 2008 and Windows Vista
  http://TechNet.Microsoft.com/en-us/Windows/dd262148

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M

• Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

  Hello

  I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

  Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
  Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

  Any ideas?

  See you soon,.
  Roy.

  Hello

  Hmm, what operating system are you using?
  Was - this operating system preinstalled by Toshiba?

  Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
  In addition, I would recommend checking the graphics card driver update.

  What version of BIOS you are using the most recent?

• Firefox Mobile - can't get the Start Page to load

  For the life of me, I can't not my selected 'Start Page', any option to choose to load at startup of firefox.

  Regardless of the option that I get, "Firefox Start", "Current Page", "Custom" Page, it always starts with the last tab, I have seen in the previous session.

  I close firefox using Advanced Task Killer. Restart it, see the "loading" screen and it just goes to the last page I was on.

  It drives me crazy!

  To force Firefox to display your home page at startup:

  1. Type "subject: config" in the address bar, then press Enter/Go on your keyboard
  2. Search for "crash."
  3. Tap "browser.sessionstore.resume_from_crash.
  4. Press the button to change from "true" to "false".

• loaded Microsoft combat flight simulator ww11 europe series. Unable to get game start with the joy stick. game with keybord works. gamepad is new logitech 3d pro extrem

  loaded Microsoft combat flight simulator ww11 europe series.  Unable to get game start with the joy stick.  game with keybord works.  gamepad is new logitech 3d pro extrem

  Hi Li-ngme,
   
  (1) have you installed drivers for the joystick correctly?
   
  It seems that the gamepad drivers is not updated for windows 7. Let us know if the gamepad work on other games under Windows 7.

  Try to access the link below and install the drivers for gamepad for windows 7 and even install as an administrator.
  http://www.Logitech.com/index.cfm/441/291&Hub=1&CL=GB, in? WT.z_sp = Image

  If this does not work, try to contact Logitech and check if they have updates on this for windows 7.
   
  ThaThanks and greetings:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

  Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

  http://support.Microsoft.com/kb/3161608

  Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

  Best regards, VZ

• TrayApp.msi comes and I have to keep hitting cancal several times to get my Start menu, can you help me?

  TrayApp.msi comes and I have to keep hitting cancel many times to get my Start menu, can you help me?

  It was the only part two of my answer ;-)

  In any case, it seems to be related to the HP printing software.

  Here are the possible corrections:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00811375&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00857032&CC=de&LC=de&DLC=de

  (this one is in German, I can't find an English, please try yourself to find one on the HP site)

  If you can't always solve the problem should ask for help in the forums of HP.

• BOOTMGR is missing is a message I get the start. checking the BIOS tells me HDD 1 fast (303).

  BOOTMGR is missing is a message I get the start. Checking the BIOS tells me HDD 1 fast (303).

  Hardiskerror wrote:

  Unfortunately I do not have the recovery discs HP or do it on a USB key. It does not start in Windows (I tried to download a recovery on another computer disc but was not sure if it's a 32 or 64-bit). It will allow me to boot from CD option but freezes when it says "starting windows."

  Anither problem just happened, as I was looking at the parameters of the Bios, the laptop turned off. Now when I try to return to this subject will not be. All that happens is that leads him 3 to forward flash 3 times (power, load and HD Led).

  Best wishes

  Roland.

  If the sticker OEM Windows on the laptop says Windows Home Premium, then it was probably 64-bit. You'll need to do a few things to bring your laptop into a useful state again.

  (1) remove the old hard drive from the laptop. Buy a new one and install it yourself, or have been in a store.

  (2) remove the battery and external power adapter and press the power button for 15-30 seconds. Plug the adapter external powre (leave uninstalled, battery). Now you should see it start BIOS and complain that it cannot find any bootable OS.

  (3) the set of recovery discs HP laptop of HP or purchase a licensed Windows Installation DVD. You can also download a version of Linux and install it on your new drive hard if that is your choice.

  How to order a HP recovery disk.

  Best regards

  ERICO

• Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

  Hi Dominic,

  I understand that you are unable to respond to this thread and created a new thread.

  As restart the print spooler does not solve the problem, please reinstall the printer and then check if that helps.

  Check out the following link to resolve the problem of iTunes.

  http://support.Apple.com/kb/HT3204

  Hope that the information provided is useful.

• With the help of LR4 with Windows 8 - impossible to get the images to desempilement.

  Using LR4 with Windows 8 - impossible to get the images to desempilement.

  Right click on the picture, select stacking, select Unstack

• Impossible to get anything Ive photoshopped with 14 elements Adobe to shoot and print at Wal-Mart kiosk

  Impossible to get anything I photo shopped with Adobe Elements at a Wal-Mart / Walgreens. Never had a problem with the photos, saving and printing with Corel Photshop

  File > save under of the editor and use the drop-down list to change the file type.

  

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• Photography plan Cloud creative student and Teacher Edition (one year) and no idea of how to get and start using the programs?

  So I just brought the creative plan Cloud photography student and Teacher Edition (one year) and no idea of how to get and start using the programs?

  Hello

  Go to creative.adobe.com and you identify with your Adobe ID

  From there, you can download the applications you purchased.

  Normally, you are taken there immediately after the purchase.