Impossible to install any windows 3.1 installer,

Similar Questions

• Impossible to install any program to do with windows or printer drivers?

  I can't get windows updates keep giving me. I think I'm up to about 55 so far. I can't get the drivers installed by windows - they install form Epson, but then a pop-up at the bottom of the screen says unable to install the drivers and it cannot recognize my printer. I also tried to download Heimdal and is not yet open. I tried to find WindowsUpdate.log to see what is happening and what I can see is not permitted. I even tried to download - System Update Readiness Tool for Windows 7 for x 64 based systems (KB947821) [October 2014]

  and who says windows cannot open this file. So I don't have an idea of what has gone wrong with the system and I don't really want to do a clean install as I have so many programs it takes me forever to re - download all programs and find all the codes, etc.

  So is there someone who can solve this problem?

  If so, I would be extremely and eternally grateful.

  thanking you all in anticipation of a good answer.

  Hello

  Thank you for the update.

  Program installation or removal fails due to corrupted registry or install blocked key. Follow these methods and check if that helps:

  Method 1: Unregister and register the Windows Setup program again

  1. Press Windows key + R, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  2. Press Windows key + R, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.

  Method 2: I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  I hope this helps.

• Impossible to install any updates from Windows

  I run Vista, SP1, 32 bit OS.  I could not successfully install an update of windows for a long time.

  I disabled the auto update because I had so many unsuccessful attempts

  Often I had to go back to a point files out of the reboot loop (configuration updates stage 3 of 3 0% complete)

  Recently ran Windows Update and see it there are 48 important updates that must be installed.  I chose an and he's never finished... just stayed in a suspended all State when trying to install - I've been waiting a long time.

  I just purchased TurboTax and installing he says he needed to update/install a windows update - she not too.

  Please help... Thank you... Keith

  I use McAfee Security Center and that you have never used anything else... laptop came with this installed, and I kept the current subscription...

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself. See if this triple McAfee fix solves the problem: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• IMPOSSIBLE TO INSTALL ANY OPERATING SYSTEM

  Hello

  I bought a computer hp laptop with this specification HP Pavilion g4-1310au Notebook PC about two weeks ago. It comes with a Freedos operating system. I tried to install an operating system from windows xp and also tried to install a windows 7, but every time I have to install the operating system, the installion was interrupted with a meassage to individuals a "blue screen" error error message saying that there are problems with my hard drive and I need to check on my hard drive. This scenario came when I tried to install windows xp on it. The next thing I did is that I tried to install windows 7 on the laptop computer. But still no luck, this time the error indicates that the installation cannot continue because there is a file missing or damaged file that prevents the installation.

  I also tried to set some settings in the BIOS of the laptop as the Boot Option to start start installation in the cd/dvd from the laptop drive.

  What seems to be the problem if I'm not able to install any operating system of your laptop? Is there a way or any special instructions for me to install the operating systems in this particular type and model of your laptop?

  Your help will be much appreciated if you could guide me to solve my problem with my laptop.

  Hello.
  
  Thank you for your patience and for all of the advice you gave me.
  After trying so hard to figrure that it seems to be the problem with my laptop
  why I can not install any operating system in it, I came across a software that makes the
  Tip for my problem. The software is called v1.4.6 RUFUS. I used it to make a
  USB bootable windows 7 and it worked.
  
  Finally, I realized that my laptop is fine but there is a problem with the process that
  I used to make a bootable usb key. After trying the software, everything went well and
  the installation of the operating system is a success.

• Impossible to install the windows update and perform the system restore

  Original title: what restore systerm causing failure/Vista

  Windows update fails with a few updates, tried to restore the back before I loaded the system machanic - fails

  Hello

  1. What is the description which are impossible to install updates?

  2. What is the message exact error do you get when you try to install updates?

  3. you get any error message while you perform the system restore?

  I suggest you to follow the steps mentioned below and check if it helps:

  Method 1: Reset components from Windows Update from the link of the suite, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2:

  If the problem persists, then try to put your computer in a clean boot state, and then try to install the update to windows.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Manually try to install updates from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Method 4: You can also try to perform the system restore , safe mode and check if the same problem occurs.

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Hope this information is useful.

• Impossible to install custom Windows 7 like drive not detected

  Hello! I have a problem with my installation of windows, I can't select partitions because s does not exist. Only see the drivers are my usb device and start: (...) I tried to format the partition with cmd but does not score was only 3600 MB (my usb memory), and I deleted my windows! any suggestions? THX

  Original title: installation of Windows 7

  Hello

  Sorry for the delay in responding,

  Thanks for the update and send the screen shot for the same thing. According to the screen shot, it seems that you have chosen the wrong option (Ex - like load a driver) because you do not receive the displayed records.

  Please follow the steps below and check if it helps.

  (A) start the computer from your Windows 7 installation DVD.
  (B) when you are prompted, Press any key to boot from the installation DVD.
  (C) select your language preferences and click on the Next button.
  Click the install button to start the installation.
  If you did step 1, then uncheck the I want to help make Windows installation better area (unless you want), and then click the go online to get the latest updates for installation option.
  If you did step 1, Windows 7 will now check online and install the available installation updates.
  Check I accept the license terms box, and click Next.

  Click (Advanced) custom option. (See screenshot below)

  

  Select the hard drive or partition for the installation of currently installed Windows you want to install Windows 7 on and click on the Next button.

  Click OK.

  Windows 7 installation will now begin.

  It will be useful,

  Concerning

• Impossible to install old windows on Satellite A100-787

  I bought the Satellite A100-787 with Vista home premium installed. I wanted to remove vista and install older windows.
  I tried Win XP without service pack, but the installation gave me a lot of blue screens and could not continue.
  I tried Windows Millennium, but even once it froze during installation because of "material conflict". How can I install old windows on this computer.
  Pls don't tell me that it is not compatible with the old windows, because this makes no sense.

  > How to install old windows on this computer?

  Thank you for using Windows XP edition family SP2 not SP1. I installed Windows XP SP2 home edition on the new Satellite A200 and if I can do it on the A200 you can do this on A100 also.

• I have window 8 whenever iam to install any windows application store displays error 0 x 80070426 and when iam open my microsoft account he signed in

  I have windows 8 when iam going to install from windows app store shows that your purchase is not complete and it displays error 0 x 80070426

  Hi Sandeep,

  Do you use a proxy connection to connect to the internet?

  You could deal with the issue because of some changes in the Windows store settings, or there could be something wrong with the Microsoft account.

  Follow these methods and check.

   

  Method 1:

  I suggest to refer to the following article and follow the steps. Here is the link for your reference.

  Why can't find or install the application on the Windows Store?

  http://Windows.Microsoft.com/en-us/Windows-8/why-find-install-app-Windows-store

  Method 2:

  I suggest you to clear the cache to store and check.

  Follow these steps to do so.

  (a) on the screen, press Windows key + R to open the Run dialog box.

  (b) type WSReset.exe and press enter.

  Method 3:

  Disable the third-party antivirus software

  If you have any third-party software installed on the computer, then I suggest you to disable the antivirus software and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  I suggest you run the troubleshooter Microsoft account and check. Here is the link for your reference.

  http://go.Microsoft.com/fwlink/?LinkId=268424

  Feel free to write us if you have any other questions related to the issue. We would behappy to help you.

• Impossible to install 10 Windows on Bootcamp partition

  #1

  Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
  So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
  He shows me the 4 partition but there are two partitions (3) and two partition (1).
  Is this a problem?
  Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
  I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!

  You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.

  If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.

• Lenovo A3500-HV, impossible to install any application after the upgrade to Android 4.4.2

  Yesterday, I warned that a new update is available for my A7-50 A3500-HV Lenovo tablet. I downloaded a 1.1 GB file and leave it to install the Tablet Android 4.4.2

  First of all, I found that I am not able to certain actions. For example, I'm not able to select checkboxes. Then a bigger problem appeared. Now I can not install any application and when I try to do, it is not possible to remove the button install. However Cancel button works correctly.

  How to solve this problem? There is another current patch?

  SOLVED!

  I had to reset to factory settings after upgrade. However, it was so painful, that I did it and just solved the problem.

• Impossible to install any program because not supported under Vista, but my PC is Windows 7 Pro 64-bit

  I try to install Rockwell Automation Studio 5000, but I get an error message saying "Studio 5000 is not supported on Windows Visa without Service Pack 1 or higher". However my PC is under Windows 7 Pro (64 bit) and Vista that is covered by the requirements of this program.

  Any ideas?

  What is the version number of Studio 5000 you have?

  You can try to install using the "compatibility mode".

  What is program compatibility?
  Program compatibility is a mode in Windows that allows you to run programs written
  for earlier versions of Windows. Most programs written for Windows Vista are also running Windows 7,
  but some older programs might run poorly or not at all.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Compatibility mode - make sure to run older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Windows 7 Compatibility Center
  See if your software or hardware is listed and what options you have

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Learn how to use the Mode of Windows 7 compatibility with legacy applications

  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Impossible to install any programs, it says that my windows install is not installed correctly, but it will not let you install anything to fix. Help!

  the major difficulty. I can't install anyting because it keeps telling me that windows install is not installed correctly, so it will not allow anything to be mounted

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/45b2ba57-1a5a-4d3f-99a1-431e414cf5b5] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have windows 7 home premimum but impossible to install any cd because I did that in my Start menu... Where I find my install or run on my hp? any advice would be appreciated

  On my last computer, I would put a cd and it would come to run or install.  on this new computer which is a hp 2711 x, I can put a cd in and nothing happens... I don't know the next step to take

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• Impossible to install KB2790655 - Windows Server 2008 R2 SP1

  Hi all

  Having the "all TCP/IP ports are a matter of TIME_WAIT state" on Windows Server 2008 R2 SP1 which has been fixed in hotfix KB2553549. After searching for updates replaced for KB2553549, I found KB2790655. When I try to install it, I get the error "this update is not applicable to your computer".

  I am currently,
  N ' is not connected to the internet

  -With the help of x 64 versions of windows updates (64 bit OS)

  -Using the Intel Xeon processor

  What I tried,
  Installation/update of system tool bar. He has successfully installed and running but no dice with KB2790655.

  -Verified in triplicate that the update is already installed on my computer.

  My current issues at the present time are,
  -A security update KB2790655 replaced? I was unable to find anything after about 30 minutes of research.

  -Are there any required pre-reqs for this 2008 R2 SP1 security update? I don't see any other than the Windows RT pre - req.

  -Could you my TCP/IP TIME_WAIT problem cause problems with windows update?

  -My next step connects to the internet to try to download the update directly?

  Links,

  https://support.Microsoft.com/en-us/KB/2553549

  https://TechNet.Microsoft.com/library/security/MS12-032

  https://TechNet.Microsoft.com/library/security/MS12-032

  Thank you!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Why Search KB940157 4.0 will not work on Win XP SP3. In addition, impossible to install any update more.

  Research program in the original installation of Win XP SP3 caused the computer to freeze if the search engine has been expanded.   So I downloaded and installed Search 4.0.  It seems that works do not exactly the same.  IF I do not enlarge the window, it doesn't seem to work, but any change in the size of the window causes hang up immediately on the computer.  Must pull on the supply cord to recover.

  As for updates, here's a list updates failed, I tried to load onto my system through Windows Update:

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Saturday, June 30, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Saturday, June 30, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Sunday, January 8, 2012 Microsoft Update

  Windows XP Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 Sunday, January 8, 2012 Microsoft Update

  Windows XP security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352) updated Microsoft Sunday, January 8, 2012

  Windows XP security update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2657424) updated Microsoft Sunday, January 8, 2012

  Windows XP Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008 x 86 (KB2656351) Sunday, January 8, 2012 update to Microsoft Windows XP

  Currently, the update process hangs up with 35 updates of uninstalled "high priority" pending, which apparently will install not until the (s) that failed is installed, if my machine seems totally non upgradable...!

  That seems to relate to programs of the .NET Framework.  Remove all would fix them this...?  What I would lose without .NET programs installed...?

  Hello

  What is the error message accurate/complete you receive the Windows Update issue?

  Depending on the issue with Windows search:

  Method 1:

   

  Step 1: Check in safe mode

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If you are able to see the start icon, then executes the method 2.

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Uninstall and reinstall Windows Search and check

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Follow the below mentioned methods for Windows Update:

  Method 1: To run the fixit for Windows update

  1. Please click the link below.

  http://support.Microsoft.com/kb/822798

  2. run the Fixit.

  Restart the computer and check it please for windows update

  Method 2:

   

  Problem could be with the .net framework is corrupt, so try to repair using link below.

  http://support.Microsoft.com/kb/976982

  Hope the above information is helpful.