Impossible to install KB2656374 - codes missing Windows Installer Error 80070641

Similar Questions

• Impossible to install an update from windows. Error message is - Windows Update error 80073712

  MS wrote to install my DVD of microsoft, but I did not.   I don't think I had one for the last 3 computers I've owned.

  I made a disc repair system if that helps and you have run the MS malicious software tool and the update tool.

  So far I have not found anything that even begins to point me in the right direction to solve this problem.

  The computer is a gateway. NV 59 laptop w/windows 7 and 64-bit i5 processor

  The update is;

  Microsoft MS10-034 security bulletin - Cumulative Security Update critical Kill bit ActiveX (980195)

  any help would be great.

  ankles,

  See if this sugesstion can help you:

  Error 80073712 with Windows in Windows Vistahttp://www.windowsreference.com/windows-vista/error-80073712-with-windows-updates-in-windows-vista/updates >

  The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive the "0 x 80073712" error code when you try to use Windows Update http://support.microsoft.com/kb/931712

• Impossible to install Office 2003 on Windows 7 Starter netbook

  Hi - I'm looking for help in setting up my office 2003 DVD on my netbook.  I tried to connect a DVD player to my netbook (not good) and followed with a copy of the contents of entires of the DVD to my netbook via a flash drive (also not good).

  In both scenarios, I get the following error:
  Installation of Microsoft Office 2003: error 1723.  There is a problem with the Windows Installer package.  A DLL required for this install to complete could not be run. »

  Cords or suggestions would be appreciated.

  Hi Steve Heff,.

  You receive this error Windows Installer error 1723 when installing a program. Installation can be terminated prematurely, or there may be a fatal error during installation. Windows Installer error 1723 occurs because Windows Installer cannot start the source files for the configuration of the software application you are trying to install. These files may be missing or damaged. In general, the original MSI installation files will be cached in the ' C: winntInstaller directory before installation begins. Inappropriate caching of a file MSI is main causes of errors, too.

  First of all, check if the Windows Installer service is started in the Services.

  1. click on start.
  2 type Service to start the search.
  3. Locate the Windows Installer Service in the Services window.
  4. make sure that the service is started, if it is to restart the service and check.

  Now try to install Microsoft Office and check.

  If you are unable to install, then I suggest that you uninstall all files related to Microsoft Office 2003 by using Windows Installer Cleanup Utility.

  See link: use the utility Windows Install CleanUp to remove Office 2000, Office XP or Office 2003: http://support.microsoft.com/kb/290301

  Now try to install Office and check.

  To get help, I would recommend that you visit the Microsoft Office forums from the link below:
  Applications - Office discussions http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Installer error when you try to install iTunes

  I am trying to install iTunes 9.1 and get a windows installer error.

  Hello joannem1,

  What is the exact error you get when you try to install iTunes on your Windows Vista computer?
  Is your computer 32-bit or 64-bit?

  Read the next article Apple support for the installation of iTunes:
  http://support.Apple.com/kb/HT1926

  The solution includes:
  -delete temporary files
  -remove the old installation of iTunes and Quicktime
  -clean the old installation by using the Windows Installer Cleanup Utility files
  -Download and install the latest version of iTunes

  Please respond and let us know if this resolution contributes to your question or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Impossible to install Google Chrome on Windows 7

  Impossible to install Google Chrome on Windows 7
  After downloading and installing Google chrome program does not open.
  Help, please

  Hello

  When you uninstall Google Chrome you also remove the Chrome files that remain when the program is removed?  Verify that no files have been left after uninstalling.  The path to check (with hidden files showing) is:

  C:\Users\\AppData\Local

  There you should see a folder with the name Google remove this folder and try to reinstall.  To get hidden files to show the computer open, select organize in the toolbar area.  We see the choice of folder and Search Options.  Click on that.  From there click on the view tab.  There is the option to show hidden files.  This will allow you to find the necessary space to remove the folder.

  Kind regards
  Alex T.
  ~ 2007-2011 MVP Windows desktop experience ~
  This answer is useful? If so, please consider clicking on the green button to Vote as helpful for the benefit of future visitors with the same question.
  If this post as a solution please mark it as the answer to help others. Thank you.

• Connection Manager HP stopped responding + Windows Installer Error 1719

  I am running Windows 7 (SP1) 64-bit operating systems.
  
  Started getting an error message of connection manager HP "HP Connection Manager Service has stopped responding.  Error code 8008005.
  
  HP Connection Manager v4.1.23.1 running.
  When I try to install a new version of v4.4.10.1 (SP58930) HP connection manager, I get an error of Windows Installer 1719.  Tried different solutions recommended for this, but nothing has worked.
  
  I see in the forum after this uninstall of the current version and then install the new version of the HP connection manager can solve my original problem.
  
  Before uninstalling the currenet HP Connection Manager version, I wanted to be sure that I will be able to install the new version without encountering Error 1719.  I don't want to be in an even worse situation of not being able to the HP Connection Manager after you uninstall it.
  
  Can I get confirmation from HP that I will be able to successfully install a new version after uninstalling the current version?

  ParryJM wrote:
  

  A ran the Microsoft Fixit then tried to install it and got the Windows Installer Error 1719.

  Then uninstalled HP connection Manager.

  Tried to install the HP (SP58930) connection manager and still have the error Windows Installer 1719.

  What do you suggest I try next?

  The fact that HP Connection Manager is no longer installed, how this will affect my computer?

  The fact that it is no longer installed will have no effect on the functioning of your laptop and none on the operating system.

  HP connection manager is simply a utility assistance for people who are making it difficult for the network through conections wifi and bluetooth connections.

  If you are not in this group it is really useless.

  From your description, it seems that if you can't follow instructions in the Microsoft fixit to the letter. By using the fixit is the easiest way to remove the registry entries and make changes to the registry that will allow installing and uninstalling software.  I can't recommend the methods that I use personally when I run on these issues because they involve access to the registry via regedit. The word people have never even heard of Regedit. Using Regedit can be a very bad thing for someone not experienced in the use of the registry editor.  All ch = angels did take place immediately and which included all the mistakes made during the access to the registry. Ongoing work on an operating system can fairly easily through the registry editor. Try the Microsoft fixit. It is a safe utility. Use it after an attempt to install and leave the window open until after error that does compete with the installation of the software.

• How can I fix a windows installer error #1635

  When I open office 2007 (excel), the windows installer struggled to load the files to the worksheet. Then after repeating the efforts of serveral times this error is displayed.

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. What is the full and exact error message?
   
  Try the steps outlined in the article below and check out them.

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "the installation source for the product is not available.
  http://support.Microsoft.com/kb/932857
   
  You may also need a quick glance, the article below and the thread.
  List of error codes and error messages for Windows Installer processes in Office 2003 and Office XP products
  http://support.Microsoft.com/kb/290158

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/Windows-Installer-error-messages-1601-and-1635/32737368-fb65-4a33-A282-e4b3cf46e3f2

• I have a black and white 2 on windows installation error 7...

  I have a black and white 2 on windows installation error 7...

  things are running smoothly for me until the last part... that says "black and white 2 cannot install. your system has not changed. Re-run the installer to try again. "Error: the filename, directory name or volume label syntax is incorrect"

  guys what should I do... Please help me... I like this game very much

  I tried to disabled my firewall and antivirus to install this game... OO with regard to the compatible thinggy that I n tried yet coz I can't even install the game in my lappy windows7...

  
  

  guys what should I do... pls help >< i="" love="" this="" game="" so="">

  If it isn't your game, then the Compatibility Center W7 says that is not compatibile. But it seems there are other versions that can run.

  Make sure that your installation discs (if his coming to a CD/DVD) are all the scratches/dirt free and clean. A bad scratch or dirty mark on a disc can cause 'odd questions' sometimes.

  There are a few things to try:

  1. find the Setup program you are running for the game and which run in XP compatibility mode.

  2 in case of failure too and then try to run it in XP Compat mode and as administrator.

  I noticed there are a few paths on the www, if you get it installed, it may be an idea to get patches and install them to the best game(check AV before installing).

   

• The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  Hi Sarma_RN,

  1. When you receive the error message?

  2. update you are trying to install?

  3. When was the last time you were able to install updates?

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  See the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing Windows Installer, updates are back with the error Code 80070641 and 641 of the Code

  My count started with windows update issues. My updates come back with Code and 80070641 Code error 641But when I went to check my windows installer, I couldn't find the file. I tried to restore before I had the problem with no luck. Also, I tried a lot of wany to try to find the file. Any suggestions?

  See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-codes-641-and-80070641-net-frame-sp1/874c45b5-9446-457a-b0f1-44bbbcdb8517

• Impossible to install programs with Windows Installer error

  I use a 32-bit version of Windows Vista Home Basic Service Pack 2 and I have problems with the update of Windows Installer, which in turn affects my attempt to install other programs. I tried to get the Windows Installer redistributable version but end upward with a message that the "update is not for my system.

  Hi William,.

  ·        What is the exact error that you receive when you try to install the program?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  However, you can follow the steps below and check if that helps you install the programs on your computer.

  Step 1

  You can check if the windows service install is set to automatic and started and change accordingly. After verification test to check if you can uninstall iTunes and reinstall. To do this, follow the steps below:

  (a) click Start.

  (b) in the start search box type services.msc and press enter

  (c) in the services window, do scroll down to Windows install.

  (d) make a right click on it and click Properties.

  (e) check if the startup type is set to automatic, otherwise it is set to automatic.

  (f) click the Start button, this will start the installation of windows services.

  (g), click on apply and Ok.

  Step 2

  If the steps above do not help, you can unregister and re-register the windows service installed on your computer and check if that helps you solve the problem.

  To do this, follow these steps:
   
  a. click on the Start menu, click on run.
  (b) in the Open box, type msiexec /unreg and then press ENTER.
  (c) in the Start menu, click run.
  (d) in the Open box, type msiexec/regserver, and then press ENTER.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm missing Windows Installer.

  Some Windows updates do not work, and also the Apple ITunes updates do not work.

  I've been on the forums of users of Microsoft and Apple.  I received so many different things to try (I tried all!), but nothing has worked.

  My simple question is HOW TO GET WINDOWS INSTALL back?

  Thank you.

  Using Vista Home Premium Service Pack 2

  RE: HOW CAN I INSTALL WINDOWS

  Diagnose and correct program installation and uninstallation of the problems automatically:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall>

  Problems installing and uninstalling programs on Windows computers:

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651>

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833>

  Reset Windows Update components.

  This tool automates the most common fixes problems with the Windows Update site.

  Note this fix it Solution has two modes by default and aggressive.

  You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  The historical section Update http://windowsupdate.microsoft.com> will be white/empty after you run the Fix It in AGGRESSIVE mode.

  This will not effect either by using the Windows Update Web site or via automatic updates update.

  http://go.Microsoft.com/?linkid=9665683>

  Check the State of Windows Installer and installer of Modules of Windows.

  I. click on start and type Services.msc and press ENTER.

  II. Locate the Windows Installer Service.

  III. double click it to check if the service is started or not.

  IV. change the type of startup to automatic and Start the service.

  V. check the same thing for Windows Installer of Module service.

  VI. Press ok and close the Services window.

  UTC/GMT is 03:26 Wednesday, May 9, 2012

• Receive a Windows Installer error message is not installed correctly.

  the Windows Installer

  Updates missing im and my comp. do not update anything. It keeps popping up that my windows installer is not installed properly. What should I do about it?

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651/en-us>

  UTC/GMT is 19:20 on Thursday, October 13, 2011

• Windows Installer error - "Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed correctly"

  Original title: Windows Installer could not access
  I am running Vista Home Premium x 64.  Recently when I try to install/upgrade programs up-to-date currently any Apple IE iTunes Quicktime and Safari I get this message.

  Windows Installer service could not be accessed.  This can occur if Windows Installer is not installed properly.

  The window update fails on the stage of the installation.  I have read several threads and tried several fixes, but without success.
  I have disabled/restarted/activated/restarted and switched to manual, auto and back with no success. When I try to force an early Setup, I get the following message:
  The Windows Installer service on Local computer started and then stopped.  Some services stop automatically that they are not in use by other services or programs. 
  I deleted the temp under apps folder.  I copied the reg. Since a sound Vista machine and imported into my machine setup.  I tried again with a reg. offered in one of the sons, all with no change.
  I tried to install version 4.5, but was unsuccessful (it looks like I got lucky there).
  May be related or yet another problem, whenever I have Windows Live Mail, a ope 'preparation for the installation of window lights up for about 15 seconds before disappearing and then my mail opens.
  I don't have a Vista CD.  My HP provides on a partitioned drive recovery files.  There seems to be no usable on my computer restore points.
  Ideas?  Help?
   

  Hello

  What happened when you tried to install Windows install version 4.5? You get an error?

  Follow these methods and check if it solves the problem:

  Method 1:
  Auditor of files (SFC) system scan on your computer. SFCscanwill make Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  Method 2:
  After analysis of SFC running, try again to install Windows Installer 4.5 Redistributable.

  Refer to this article:
  http://support.Microsoft.com/kb/942288/en-AU

   

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the driver of Logitech Webcam - error code 19

  Hi gurus,

  I just buy Pavilion m9400t with Vista x 64, Dual Core Quad Q6700.

  Install Logitech QuickCam Pro 4000 without problem, so I decided to upgrade with the new webcam (Quickcam communicate Deluxe) and the beginning of the problem.  Install the new driver/software without problem, after reboot when I try to use the Webcam webcam cannot be used..., check the Device Manager for this webcam and found he said one! status, with the following error code:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (code 19).

  Tried the following, but nothing works:

  1 uninstall and reinstall using the new driver from Logitech.

  2. Uninstall and reinstall in safe mode.

  3. Uninstall and reinstall using the generic driver

  How can I get rid of this error code 19?

  Thank you

  In this issue fixed. Used regedit folder specific location and delete the LowerFilters entry, exit and it will get rid of the error code 19 from Device Manager, not even require a restart.