Impossible to install kies3 on windows 8 :(

Similar Questions

• Impossible to install firefox on Windows 7

  I had problems with the update Firefox v25. I have Avast Antivirus installed and running Windows 7. Given that I could not install updated, I uninstall Firefox. Then I tried to download the heel and the whole package to v26. Whenever I try to install, it starts up and extract the files, I see 100% extract and then nothing happened.

  I even disabled the antivirus software, but it made no difference. Help, please.

  I've traced the permissions changed for the installation of adobe acrobat xi temp folder.
  Apparently, adobe made the changes to plug a security hole which they could not solve.
  change the permissions as they did affect many programs that need to use temporary folders to function correctly.

  hope that this info clears things up for you all.

  solution.
  goto the following folder in the user account from your computer.
  IE c:\users\owner\AppData\Local (owner is the name of your account)
  Right-click on the Temp folder and select Properties.
  Click the Security tab at the top.
  Click on change.
  in the pop-up box, click on continue.
  Click on Add.
  in the white box, type the Word users, starting with the capital letter U.
  users settings check that the following has a check mark beside it:
  Read & execute
  Content of the file
  Read
  Now click on apply
  Now click on ok
  your programs can now properly use your case temp again.

• Impossible to install KB2931354 on Windows Vista 32-bit SP2

  Done through Windows Update, it fails with the error code 80070027.  In fact with the patch downloaded Windows6. 0-KB2931354-x 86.msu, it fails with "the following updates were not installed: update security for Windows (KB980842).

  To resolve this problem, I tried:

  Resolutions in https://support.microsoft.com/en-us/kb/883825

  Method 1 - restart.

  Method 2 - Start the computer in safe mode with networking support. This computer is connected to a network (do not use a modem) and Windows Update does not load in safe mode with networking support.

  Method 3 - perform a clean boot the computer, and then install the update.

  Method 4 - temporarily disable spyware and antivirus software.

  Method 5 - temporarily disable firewalls.

  Resolutions in https://support.microsoft.com/en-ca/kb/971058

  Method 1 - automatically reset the Windows Update components with the download of Microsoft Fixit.  I ran it several times until all problem areas shows a checkmark as being corrected.

  Method 2 - manually reset the Windows Update components.  All steps have been completed successfully, with the exception of the appidsvc to stop (step 2 - error was that the service did not exist), registration dll (step 6) and install the latest Windows (c:\windows\system32\wuaueng.dll) Update Agent (step 11 - no standalone download, it does not exist for Vista but c:\windows\system32\wuaueng.dll is the latest version - 7.6.7600.256).

  Upon registration of the dll, a long list could not be saved.  Browseui.dll qmgr.dll and mshtml.dll, shdocvw.dll failed with the error 'the module was loaded but the entry point DllRegisterServer was not found' and msxml.dll, gpkcsp.dll, sccbase.dll, slbcsp.dll, initpki.dll, wuaueng1.dll, c:\windows\system32\dllcache\wucltui.dll, wuweb.dll, c:\windows\system32\muweb.dll, failed with the error "failed to load module.

  Resolutions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/cannot-install-some-windows-updates-error-code/328ab424-a5cf-47bd-9c7d-fcaa942d7631

  Method 1 - Download and install the updates manually.

  Method 2 - remove earlier versions of the .NET Framework and then install all versions of the .NET Framework.

  Due to the KB980842 error when you try to patch manually, I also tried to look to the top of this Knowledge Base article.  He referenced KB982533 - who had a patch.  When I tried to apply the Windows6 file. 0-KB982533-x 86.msu, the error was "this update does not apply to your system.

  I also applied Windows6. 0-KB947821-v35-x 86.msu (System for Windows Vista Update Readiness Tool).  That has been recommended as a possible solution in one of the pages on the repair of Windows Update - I do not remember now that one.

  At this point, Google and me are ideas.

  Solved by formatting and reinstalling Windows Vista.

• Impossible to install iTunes on Windows Vista Home Premium 64-bit

  Original title: Itunes 9 on Windows Vista 64 bit home preium

  Hi I am trying to install Itunes on Windows vista 64-bit family I am questions.

  Hello

  ·        What happens when you try to install iTunes?

  ·        You have the right version of iTunes to install (iTunes 64 bit)?

  Here is that the download link of iTunes for 64 bit Windows Vista

  http://www.Apple.com/iTunes/download/

  You can follow the link given below to help troubleshoot problems when installing iTunes on your computer.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/ht1926

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the driver Windows XP SP3

  Hi I'm Julviano,

  I have a problem with the driver installation for windows xp sp 3

  I use toshiba satellite c640, in fact, it's already a windows 7 installed on this machine, but because of my program companies is not supported in windows 7, I reinstalled Windows xp sp3 and I download the driver for windows xp in toshiba Web site

  But when I try to installed the driver it say "this computer does not meet the minimum requirements for installing the software.
  I don't know that I have download the right driver

  a driver who can not be installed:
  Intel chipset
  Driver VGA
  Wireless driver
  LAN driver

  can someone help me please?

  Concerning

  (1) I don't know where you downloaded the drivers mentioned?

  (2) this system initially took charge of operating system windows 7 from

  (3) I checked the correct site here

  http://Toshiba-Asia.com/SG/support/drivers

  (4) there is a way, you can run compatible programs in windows 7, windows xp in

  install windows xp mode in windows 7 Professional, ultimate or enterprise only

  (5) before installing read this article here

  http://Windows.Microsoft.com/en-in/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  (6) you can download windows xp mode or virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8002

  (7) you can download windows virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=3702

  Guilbert

• Impossible to install itunes in Windows 8

  Separated from this thread.

  Hi Bennet:

  I use a new Lenovo IdeaCentre K410 with Windows 8 is installed. I don't have Windows 7.

  I can't install iTunes 11.0.1 12 x 64. Shortly after the installation starts, I get an error message that says:

  "iTunes Installer finished."

  Errors occurred during the installation before iTunes could be configured. Your system has not changed. To complete the installation, run Setup again. »

  I tried to install it several times. Same result.

  Any other suggestions?

  Thank you

  Beverly

  Hi Beverly,.

  I currently having the same problem you posted above in 24/01/13.  I was wondering if you ever resolved your problem?  If so, please share how to install iTunes on my Dell with Windows 8 installed.

  Thank you!

  Mimi

  Hi Mimi,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you also have the same problem as others.

  I suggest you follow the steps in the link below to install iTunes on Windows 8.

  If you can't install or update iTunes for Windows:

  http://support.Apple.com/en-us/HT201668

  If the problem persists, then need to contact Apple support.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• Impossible to install ubuntu with windows 8 double trunk

  I have lenovo laptop g500s with windows 8 pre installed. I couldn't install ubuntu (linux) alongside win 8. When I tried to dual boot, this laptop with ubuntu victory 8 boot manager was corrupted.can someone suggest me how to install ubuntu with windows 8.

  Hello Samyajith,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the exact error message or code when you say, 'victory 8 boot manager has been corrupted?

  I appreciate your efforts to resolve the issue.

  Please refer to the suggestions for aufa35 replied on 6 January 2014 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/dual-boot-Windows-8-and-Ubuntu/cce29abd-4190-4e9d-87E3-33b7fb640569

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If this does not help, then I would recommend you post the question on the Ubuntu forums.

  Ubuntu community forums
  http://community.Ubuntu.com/contribute/support/Ubuntu-forums/

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Impossible to install the new Windows XP Home edition from scratch on Tecra S3

  With F6 in WXP install driver Toshiba raid (from USB floppy drive) properly installed first, partionating disc ok, continue to install Windows XP Home edition.
  WXP wants then again Toshiba raid drivers, installing WXP because he's not reading USB floppy (undirected). Do I need the recovery CD that I don't have.

  Hi guys

  I had a similar problem installing RAID on my old Qosmio.
  I didn't use the restore CD but the simple Microsoft Windows Boot CD.
  The problem was my incorrect installation procedure.

  After the installation of the driver the USB FDD drive RAID, the configuration of the installation works fine until I formatted the HARD drive or partition.
  This has been bad! Don't format or delete the partition after installing the RAID driver!

  In addition, make sure you use the right set of RAID! These settings can be checked in the BIOS! My Qosmio user manual provides lots of information about RAID. Did you check your user manual which settings are required to install the OS of Win CD?

  Do and good luck!

• Impossible to install Skype on Windows 7 64 bit

  Hello

  I try to install current version of Skype (downloaded from the site)

  After choosing the language, etc., it got stuck on "Installation, could take a few minutes..."

  my version of windows is Win 7 Ultimate 64 bit

  my version of ie - explorer is IE11 (11.0.9)

  I recently formatted my computer and reinstall the OS, so everything is very fresh and new...

  Would be grateful for your reply of quink,

  Thank you!!!

  Dana

  P.S. I tried to install as administrator and it did not help.

  Or the deletion of the temporary files or redownloading the installation file

  Try to install the version of Skype 7.5.0.102 currently being using this Setup program:

  http://download.Skype.com/MSI/SkypeSetup_7.5.0.102.msi

• Impossible to install iTunes on Windows 10 (64-bit)

  If all this started because I had problems of synchronization via USB cable. "Connection" would be constantly. I tried different cables, different ports, nothing worked and the next tip was to reinstall iTunes. But then iTunes has never really disappeared and when he relocated, nothing was different. So I started researching... and removed everything according to the instructions here: troubleshooting issues with iTunes for Windows updates

  During troubleshooting, I did it by using the windows control panel and an app called Total Uninstall. I also used CCleaner after uninstalling. All this and I still can't get iTunes to install. If I use the generic version of the Web site, I get the following error:

  "A later version of Apple Application Services (64-bit) is already installed."

  Of course, it is not installed. It does not appear in the Panel, Total Uninstall, or in the Windows Installer Clean up App, I've seen suggested elsewhere.

  OK, while I've read about this version of iTunes for "older video card" that is supposed to work with Windows 64-bit 10. I downloaded that. Uninstalled everything that was there, once again (in order). Restarted. Ran as administrator - but he gets to "starting services" bombs and then restores. It installs AAS, Hello and Apple update. If the internet tells me that there is a problem with Apple Mobile Device Services. I unpacked the installer, tried just to install the amendments and get:

  "A later version of the Apple Mobile Device service is already installed"

  Alert to despoil: it is not. There is no services with the word "Apple" running at all on the machine. There is no folder in Program Files or Program Files (x 86) under common files.

  I'm completely stuck. I have uninstalled/reinstalled the so many things so many times and so many tools, I don't know where to go next. I'm about to use a wipe completely formatted HD and the new installation of Windows, but I bet that iTunes has found a way to bury itself in the diet so that even this will not provide a clean slate.

  Any ideas on what I can do given what has already been attempted?

  Thank you!

  Running the Microsoft install and uninstall utility mentioned in note 1 below the second box from the tip of the user.

  TT2

• Impossible to install itunes on windows 10 12.3.2.35

  Hello

  I have tried to update itunes in the past months but maintained an error ' the older version of apple software update cannot be removed. Contact your technical support group"

  I tried to uninstall the current version of itunes by following the steps recommended by the experts in the community. I'm stuck when I try to uninstall Apple Software Update for Windows 10 (see second screen captures below)

  

  

  If someone was faced with a similar question share your solution please

  Thank you!

  The iTunes Installer strives systematically each of the existing components of uninstall before installing the new. ASU control panel using programs and features of repair may allow deletion.

  It is also possible that Microsoft Installer and uninstaller Fixit program may be able to remove the component. See the note under the second box of troubleshooting problems with iTunes for Windows updates.

  If it cannot be removed, then all the other components of Apple can be, and then alternates installed by following the steps in the section install the missing components.

  TT2

• Impossible to install programs with Windows Installer error

  I use a 32-bit version of Windows Vista Home Basic Service Pack 2 and I have problems with the update of Windows Installer, which in turn affects my attempt to install other programs. I tried to get the Windows Installer redistributable version but end upward with a message that the "update is not for my system.

  Hi William,.

  ·        What is the exact error that you receive when you try to install the program?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  However, you can follow the steps below and check if that helps you install the programs on your computer.

  Step 1

  You can check if the windows service install is set to automatic and started and change accordingly. After verification test to check if you can uninstall iTunes and reinstall. To do this, follow the steps below:

  (a) click Start.

  (b) in the start search box type services.msc and press enter

  (c) in the services window, do scroll down to Windows install.

  (d) make a right click on it and click Properties.

  (e) check if the startup type is set to automatic, otherwise it is set to automatic.

  (f) click the Start button, this will start the installation of windows services.

  (g), click on apply and Ok.

  Step 2

  If the steps above do not help, you can unregister and re-register the windows service installed on your computer and check if that helps you solve the problem.

  To do this, follow these steps:
   
  a. click on the Start menu, click on run.
  (b) in the Open box, type msiexec /unreg and then press ENTER.
  (c) in the Start menu, click run.
  (d) in the Open box, type msiexec/regserver, and then press ENTER.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install itunes, open windows update, norton antivirus used does not work

  "ITunes can not install due to one of these errors occurred during the installation of assembly Microsoft.VC80.CRT, version ="8.0.50727.4053"Type ="win 32,", publicKeyToken ="1fc8b3b9a1e8e3b"process or architecture =" x 86 "RESULT: 0X8007054F

  "" I was told to install the update for Microsoft Visual C++ 2005, but then got a similar interneErreur 1935 an error occurred during the installation of assemblyMicrosoft.VC80.CRT type = "win32", version = "8.0.50727.4053" publicKeyToken = "1fc8b3b9a1e18e3b", process or architecture = "x 86".

  In addition, my Windows update no longer works.  I ran the fix is, but it did not help.

  And just to smile, my Norton Antivirus used open.  His appearing in my list program, but when I try to open it to get to the main console, it does nothing.

  Help, please!

  How to use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833

  For your message of problem of Norton here: http://community.Norton.com/

  iTunes:

  How to recreate your iTunes and playlists library
  http://support.Apple.com/kb/HT1451

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  Uninstall software, remove programs and solve uninstalling problems
  http://www.revouninstaller.com/

  ITunes download (32-bit):
  http://www.Apple.com/iTunes/download/

  Download 64 - bit:
  http://support.Apple.com/kb/DL1037

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Impossible to install all the windows...!

  Hey guys. Initially, my laptop has been running 10 32-bit windows. but then I tried to install 10 64-bit windows and it says windows cannot update the computers boot configuration. then I just formatted and tried to reinstall windows 10 32 bit and it says the same thing windows is unable to update the computers boot configuration. now, I tried to install windows 7 64 bit... the error remains the same... and I tried to install everything via a usb port. now my laptop is dead... then, what should I do? Please help guys!

  What is the brand and model of your laptop?

  Make sure that format you the partitions correctly during installation.

  Boot from the DVD 64 bit Windows 7

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Impossible to install QuickTime for Windows 7 64 bit?

  For some reason, I wasn't able to install the Quick Time plug-in on a 64-bit Windows 7 OS.

  I noticed members comment on in the Apple forum, two years ago on this issue,.
  yet I did not come across a solution.
  If anyone has answers or a way around it I would be very happy.
  Thank you!

  Try to download from here.

  http://support.Apple.com/kb/DL1047