Impossible to install ubuntu with windows 8 double trunk

Similar Questions

• Install Ubuntu with Windows 10 problems.

  Hello

  I had problems trying to install Ubuntu with Windows 10 (and Linux Mint also has problems). When I try to mount my hard drive (with 10 Windows on it), it says that Windows is put into hibernation. I want to install Ubuntu with Windows and not to clean install. Ubuntu detects my external hard drive and said: «There are currently no operating system installed...» ', but it does not detect my hard drive with Windows 10 on it.

  Thanks for any help,

  DaComputer Guy

  Sometimes, when the quick start is activated, it can cause Linux to correctly identify the Windows partition as being in the State of hibernation. Try to disable the quick start and see if it solves the problem:

  1. open the Control Paneland turn the mode icons

  2. in the list, go to Power Options

  3. in the left pane, click choose the power buttons what

  4. scroll down and uncheck the Quick start

  

• Install Ubuntu with Windows 7

  I have a laptop HP Compaq Presario CQ56-112SA which has WIndows 7 Home Edition OS. I want to install Ubuntu 12.04 OS on its own partition to dual boot with Windows. However, my understanding is that the laptop has 4 primary partitions on the HARD disk that are already being used and so no more partitions can be made. I can reduce the 'C' partition to make space, but I understand that I must also release an entire partition. I know I can install Ubuntu 'Inside' Windows, but I'd rather not.

  Some participants say you can remove safely HP-tools to provide a partition for Ubuntu, but others advise not because HP-Tools contains a kit of the BIOS recovery, say, is indispensable.

  I would be very grateful for the opinions of experienced editors which I most decidedly am not.

  Hello gordon99,

  I see you are trying to install Ubuntu on your laptop. To do this, I would like to direct you to this document: frequently asked Questions on Linux (FAQ) for all your questions regarding this.

  Thanks for posting on the HP Forums.

• Impossible to install programs with Windows Installer error

  I use a 32-bit version of Windows Vista Home Basic Service Pack 2 and I have problems with the update of Windows Installer, which in turn affects my attempt to install other programs. I tried to get the Windows Installer redistributable version but end upward with a message that the "update is not for my system.

  Hi William,.

  ·        What is the exact error that you receive when you try to install the program?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  However, you can follow the steps below and check if that helps you install the programs on your computer.

  Step 1

  You can check if the windows service install is set to automatic and started and change accordingly. After verification test to check if you can uninstall iTunes and reinstall. To do this, follow the steps below:

  (a) click Start.

  (b) in the start search box type services.msc and press enter

  (c) in the services window, do scroll down to Windows install.

  (d) make a right click on it and click Properties.

  (e) check if the startup type is set to automatic, otherwise it is set to automatic.

  (f) click the Start button, this will start the installation of windows services.

  (g), click on apply and Ok.

  Step 2

  If the steps above do not help, you can unregister and re-register the windows service installed on your computer and check if that helps you solve the problem.

  To do this, follow these steps:
   
  a. click on the Start menu, click on run.
  (b) in the Open box, type msiexec /unreg and then press ENTER.
  (c) in the Start menu, click run.
  (d) in the Open box, type msiexec/regserver, and then press ENTER.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install Ubuntu with Win 7

  I downloaded Ubuntu 14.10 (32-bit edition) and I want to install it without uninstalling my Windows 7. The installation gave me 2 options, it is to install Ubuntu with Windows 7, is second to install in a specific partition. My question is can I install Ubuntu in the 3rd partition of my hard drive without affecting Windows 7 that is installed in the first partition? Thank you.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Ubuntu can be installed after Windows has already been installed. You can see the article below.

  https://help.Ubuntu.com/community/WindowsDualBoot

  Alternatively, you can use "Wubi" install Ubuntu in Windows 7.

  You can check: https://help.ubuntu.com/community/Wubi

  In addition, you can install Ubuntu on a separate partition. However, if you want to learn more about the process, I would ask contact you support Ubuntu.

  Ubuntu - contact us

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Failure of dual booting Ubuntu with Windows 8 on the Satellite P845t

  I tried in vain to dual boot Ubuntu 13.10 to a new Satellite from Toshiba with Windows 8.1. The laptop has UEFI. I used the two live DVD and live USB, and I tried with SecureBoot both active and disabled.

  Whenever I have the same failure. J
  UST before the next GRUB, the error message screen appears flashes briefly on the screen "error: variable 'root' is not defined". The GRUB screen appears. I tried Trying-out Installation and Installation and whenever once I have selected one of these options, then, the screen turns off and remains empty. When you use a DVD, the DVD still Purring for several seconds, before going to death.

  Out of curiosity I tried to install OpenSUSE 12.3 in the same way (with SecureBoot both enabled and disabled in turn, etc.) and stalls from installation to a similar point every time, which leads me to think that it is something to do with how UEFI is installed on the laptop.

  The laptop is a Toshiba Satellite P845T about 3 months with the HARD drive replaced with a SSD.
  It came with pre-installed Windows 8, and I've upgraded to 8.1 Windows last week, shortly before trying to install Ubuntu.

  Curiously, the Windows desktop 8.1 has a watermark in the bottom right that says: "SecureBoot is not configured correctly", but that may not be not relevant for this query, such as Google search, that suggests that many people have this watermark even if SecureBoot is properly configured. And activating/deactivating the SecureBoot makes no difference for the message.

  Any help would be welcome, as I'd like to get this double-started with Ubuntu.

  Thank you!

  Hello

  Can you tell me if you tried to start a direct media from a USB?
  If YES - which was / is the result?

  BTW - I guess that's your feed:

  http://UbuntuForums.org/showthread.php?t=2184839

  BR

  Tom

  Post edited by: MannerhagenVPO

• All-in-one wireless printer Photosmart 109 n install problems with Windows 8.1

  Hello

  I have a Photosmart Wireless all-in-One 109 n printer. I recently bought a new laptop with windows 8. When I put in place it automaticalyl found the printer and installed it. I can use only through remote HP AiO. I can't use the scanner there is no application or a program that works. I tried to install the full feature software and managed to go that far to extract the files but once concludes nothing happens. I uninstalled the printer and then re-installed. nothing happens. I'm not a computer wizzard so I need help please!

  bionicpatti,

  I really appreciate the up-to-date information and thank you for your patience. I wish that you continue with the following steps:

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109707-1&cc=us&DLC=en&LC=en&OS=4158&product=3794625&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Please let me know the results!

  Thank you once again,

• Impossible to install firefox on Windows 7

  I had problems with the update Firefox v25. I have Avast Antivirus installed and running Windows 7. Given that I could not install updated, I uninstall Firefox. Then I tried to download the heel and the whole package to v26. Whenever I try to install, it starts up and extract the files, I see 100% extract and then nothing happened.

  I even disabled the antivirus software, but it made no difference. Help, please.

  I've traced the permissions changed for the installation of adobe acrobat xi temp folder.
  Apparently, adobe made the changes to plug a security hole which they could not solve.
  change the permissions as they did affect many programs that need to use temporary folders to function correctly.

  hope that this info clears things up for you all.

  solution.
  goto the following folder in the user account from your computer.
  IE c:\users\owner\AppData\Local (owner is the name of your account)
  Right-click on the Temp folder and select Properties.
  Click the Security tab at the top.
  Click on change.
  in the pop-up box, click on continue.
  Click on Add.
  in the white box, type the Word users, starting with the capital letter U.
  users settings check that the following has a check mark beside it:
  Read & execute
  Content of the file
  Read
  Now click on apply
  Now click on ok
  your programs can now properly use your case temp again.

• Impossible to install iTunes on Windows 10 (64-bit)

  If all this started because I had problems of synchronization via USB cable. "Connection" would be constantly. I tried different cables, different ports, nothing worked and the next tip was to reinstall iTunes. But then iTunes has never really disappeared and when he relocated, nothing was different. So I started researching... and removed everything according to the instructions here: troubleshooting issues with iTunes for Windows updates

  During troubleshooting, I did it by using the windows control panel and an app called Total Uninstall. I also used CCleaner after uninstalling. All this and I still can't get iTunes to install. If I use the generic version of the Web site, I get the following error:

  "A later version of Apple Application Services (64-bit) is already installed."

  Of course, it is not installed. It does not appear in the Panel, Total Uninstall, or in the Windows Installer Clean up App, I've seen suggested elsewhere.

  OK, while I've read about this version of iTunes for "older video card" that is supposed to work with Windows 64-bit 10. I downloaded that. Uninstalled everything that was there, once again (in order). Restarted. Ran as administrator - but he gets to "starting services" bombs and then restores. It installs AAS, Hello and Apple update. If the internet tells me that there is a problem with Apple Mobile Device Services. I unpacked the installer, tried just to install the amendments and get:

  "A later version of the Apple Mobile Device service is already installed"

  Alert to despoil: it is not. There is no services with the word "Apple" running at all on the machine. There is no folder in Program Files or Program Files (x 86) under common files.

  I'm completely stuck. I have uninstalled/reinstalled the so many things so many times and so many tools, I don't know where to go next. I'm about to use a wipe completely formatted HD and the new installation of Windows, but I bet that iTunes has found a way to bury itself in the diet so that even this will not provide a clean slate.

  Any ideas on what I can do given what has already been attempted?

  Thank you!

  Running the Microsoft install and uninstall utility mentioned in note 1 below the second box from the tip of the user.

  TT2

• Impossible to install KB2931354 on Windows Vista 32-bit SP2

  Done through Windows Update, it fails with the error code 80070027.  In fact with the patch downloaded Windows6. 0-KB2931354-x 86.msu, it fails with "the following updates were not installed: update security for Windows (KB980842).

  To resolve this problem, I tried:

  Resolutions in https://support.microsoft.com/en-us/kb/883825

  Method 1 - restart.

  Method 2 - Start the computer in safe mode with networking support. This computer is connected to a network (do not use a modem) and Windows Update does not load in safe mode with networking support.

  Method 3 - perform a clean boot the computer, and then install the update.

  Method 4 - temporarily disable spyware and antivirus software.

  Method 5 - temporarily disable firewalls.

  Resolutions in https://support.microsoft.com/en-ca/kb/971058

  Method 1 - automatically reset the Windows Update components with the download of Microsoft Fixit.  I ran it several times until all problem areas shows a checkmark as being corrected.

  Method 2 - manually reset the Windows Update components.  All steps have been completed successfully, with the exception of the appidsvc to stop (step 2 - error was that the service did not exist), registration dll (step 6) and install the latest Windows (c:\windows\system32\wuaueng.dll) Update Agent (step 11 - no standalone download, it does not exist for Vista but c:\windows\system32\wuaueng.dll is the latest version - 7.6.7600.256).

  Upon registration of the dll, a long list could not be saved.  Browseui.dll qmgr.dll and mshtml.dll, shdocvw.dll failed with the error 'the module was loaded but the entry point DllRegisterServer was not found' and msxml.dll, gpkcsp.dll, sccbase.dll, slbcsp.dll, initpki.dll, wuaueng1.dll, c:\windows\system32\dllcache\wucltui.dll, wuweb.dll, c:\windows\system32\muweb.dll, failed with the error "failed to load module.

  Resolutions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/cannot-install-some-windows-updates-error-code/328ab424-a5cf-47bd-9c7d-fcaa942d7631

  Method 1 - Download and install the updates manually.

  Method 2 - remove earlier versions of the .NET Framework and then install all versions of the .NET Framework.

  Due to the KB980842 error when you try to patch manually, I also tried to look to the top of this Knowledge Base article.  He referenced KB982533 - who had a patch.  When I tried to apply the Windows6 file. 0-KB982533-x 86.msu, the error was "this update does not apply to your system.

  I also applied Windows6. 0-KB947821-v35-x 86.msu (System for Windows Vista Update Readiness Tool).  That has been recommended as a possible solution in one of the pages on the repair of Windows Update - I do not remember now that one.

  At this point, Google and me are ideas.

  Solved by formatting and reinstalling Windows Vista.

• Cannot install printer with Windows 8.1

  I have a new laptop with Windows 8.1 and when I tried to install my HP Deskjet F24100, he said that the operating system was wrong (or words to that effect!) I then looked on the installation CD that says that it is for Windows 2000, XP, Vista. Now should I chuck a really reliable printer in perfect working condition and get a new one or is it possible to "revaluation" so I can install it? Thank you

  Hello

  Sorry, I can't find F2410 not0 but I can find F2410 not and it is on the following list:

  http://support.HP.com/us-en/document/c03168175

  If it's F2410 not, please download the following package and install on your computer Windows 8.1:

  http://ftp.HP.com/pub/softlib/software12/COL29199/al-109119-1/DJ_AIO_06_F2400_NonNet_Full_Win_WW_140_404.exe

  Kind regards.

• Impossible to install the driver Windows XP SP3

  Hi I'm Julviano,

  I have a problem with the driver installation for windows xp sp 3

  I use toshiba satellite c640, in fact, it's already a windows 7 installed on this machine, but because of my program companies is not supported in windows 7, I reinstalled Windows xp sp3 and I download the driver for windows xp in toshiba Web site

  But when I try to installed the driver it say "this computer does not meet the minimum requirements for installing the software.
  I don't know that I have download the right driver

  a driver who can not be installed:
  Intel chipset
  Driver VGA
  Wireless driver
  LAN driver

  can someone help me please?

  Concerning

  (1) I don't know where you downloaded the drivers mentioned?

  (2) this system initially took charge of operating system windows 7 from

  (3) I checked the correct site here

  http://Toshiba-Asia.com/SG/support/drivers

  (4) there is a way, you can run compatible programs in windows 7, windows xp in

  install windows xp mode in windows 7 Professional, ultimate or enterprise only

  (5) before installing read this article here

  http://Windows.Microsoft.com/en-in/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  (6) you can download windows xp mode or virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8002

  (7) you can download windows virtual pc here

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=3702

  Guilbert

• Impossible to install itunes in Windows 8

  Separated from this thread.

  Hi Bennet:

  I use a new Lenovo IdeaCentre K410 with Windows 8 is installed. I don't have Windows 7.

  I can't install iTunes 11.0.1 12 x 64. Shortly after the installation starts, I get an error message that says:

  "iTunes Installer finished."

  Errors occurred during the installation before iTunes could be configured. Your system has not changed. To complete the installation, run Setup again. »

  I tried to install it several times. Same result.

  Any other suggestions?

  Thank you

  Beverly

  Hi Beverly,.

  I currently having the same problem you posted above in 24/01/13.  I was wondering if you ever resolved your problem?  If so, please share how to install iTunes on my Dell with Windows 8 installed.

  Thank you!

  Mimi

  Hi Mimi,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you also have the same problem as others.

  I suggest you follow the steps in the link below to install iTunes on Windows 8.

  If you can't install or update iTunes for Windows:

  http://support.Apple.com/en-us/HT201668

  If the problem persists, then need to contact Apple support.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• Impossible to install iTunes on Windows Vista Home Premium 64-bit

  Original title: Itunes 9 on Windows Vista 64 bit home preium

  Hi I am trying to install Itunes on Windows vista 64-bit family I am questions.

  Hello

  ·        What happens when you try to install iTunes?

  ·        You have the right version of iTunes to install (iTunes 64 bit)?

  Here is that the download link of iTunes for 64 bit Windows Vista

  http://www.Apple.com/iTunes/download/

  You can follow the link given below to help troubleshoot problems when installing iTunes on your computer.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/ht1926

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the driver Windows 7 for my Canon MF4150 USB printer and scanner-worked in XP

  Original title: Windows 7 x 64 Windows printer problems is not able to resolve

  The scanner and my Canon MF4150 USB printer was working fine with my Windows XP computer.

  I got a new computer with Windows 7 x 64 OS and I can't get the printer to work.

  I downloaded the printer driver specified for Windows 7 x 64.

  The installation program is not accepted as I get a message that the resource file are not available.

  I then added the printer manually without success.

  The strange thing is that it shows in devices and printers but nothing prints.

  Initially, it has the usual green check that the default printer then becomes a warning sign yellow when I try to print.

  Right-click on the printer and select "Printer properties" and select "Canon MF4100 series UFRII LT" in the SUP menu if it exists, this name may be different in your machine. After the Properties window shows tab select the 'Port '. change the port to another USB port (the one that the printer is connected to), and then apply the changes. Your problem should be solved.

  I hope this helps