Windows 8 stop when iPod connection

Similar Questions

• Windows firewall stops when a wireless connection is established.

  Windows firewall stops when a wireless connection is established during the start-up or wakup or manually connected via wireless.  The firewall can be activated manually after wireless connection is established.  Firewall survives boot and reactivation if computer connected to the router via ethernet (cable).

  OS is 32-bit Vista Home Premium, SP2.  The platform is Acer A4720Z dual-core Intel laptop.  Wireless adapter is integrated Atheros AR5007EG - Atheros 7.70.396 driver (whidh is current & compatible Microsoft version).

  Current virus/firewall is MSE and MS Firewall.  No firewall problem until the installation of Security Essentials.  Previous virus/firewall was Mcafee SecurityCenter Suite that uninstalled cleanly via the Remove Mcafee (MCPR.exe) utility.

  All the relevant ideas welcome. Thank you.

  Go to network and sharing Center and then choose manage wireless network and try to remove this Wireless if it is there and try to add it again if you want. Try to upgrade Microsoft Security Essentials and also check for update for Windows. Also, run the full system scan and remove potential threats. If the problem has not resolved then contact technical support:

  https://support.microsoftsecurityessentials.com/

• Pop Up window which appears when you connect to the computer

  I made an update of windows Monday, 7-6 and now get the following message when I connect to my computer.  When you try to close the popups they keep reappearing. Any idea on what it's for or how to fix?

  The feature you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder containing the installation package "status.msi" in the box below. ""  Another box pops up saying please wait while windows configures the status. Then another box appears saying that cannot find an installation package for the product. Try the installation again using a valid copy of the installation package "status.msi".

  SOLUTION: Download this file:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-69585-1&LC=en&DLC=en&cc=us&lang=en&OS=2100&product=391182

  Extract the .exe

  go to this folder:
  slp_dd_hathi_110_017\setup\status\

  tap the status.msi. Steve

• Windows Mail stops when I use the spellchecker

  Windows Mail sometimes/often stops when I use the spellchecker.  There is no obvious reason or a consistent trigger I can find.  I lost the email I typed.  I would prefer not to have to record every email in my drafts before I check spelling it.  How can I fix?

  Hi Holnee,

  Looks like you can have something in the background, interfere or that we would need to check the system for any problem files.

  The first thing you can do is to check your system for any possible infection such as a virus or spyware. Do a full scan of the system and see if you find infections and if yes which solves the problem that you are experiencing.

  The next thing to do would be to put yourself in a situation of clean boot to ensure that no background program interfere.

  1. Open the Start Menu
  2. Type msconfig in the Search box and press enter
  3. Click on continue in the UAC prompt
  4. On the general tab, click Selective startup.
  5. Under Selective startup, click on to clear the Load Startup items check box.
  6. Click on the Services tab, click to Select the hide all Microsoft Services check box and then click on disable all.
  7. Click OK.
  8. When you are prompted, click restart.
  9. After the computer starts, check if the problem is resolved.

  If that still does not solve the problem then let's you run the System File Checker.  It will scan all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  1. Open the Start Menu
  2. Type the command prompt in the box start the search
  3. Right click on command prompt and select run as administrator
  4. Click on continue in the UAC prompt
  5. Type the following command and press enter:
     sfc/scannow
  
  Please let us know if this solves your problem, or if you have any questions.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 'Windows Explorer stops' when you try to print

  I have a 32-bit operating system Vista has an attached through USB printers laserjet P1006 HP. It has worked well for more than a year when, all of a sudden, I started having the following boxes. 'Windows Explorer stops' "Windows Explorer restarts" then I get the box "Check for Updates of Windows. The printer does not print ever.

  I tried to remove/add the printer. Downloaded the latest drivers from HP. Finally decided to use the Dell PC Restore function. Formatted and reloaded the OS. After you add the printer, it worked for 2 days. All of a sudden have the same messages and not print.

  Don't know what to do with it. Any help would be greatly appreciated.

  Thank you

  Steve

  Hello

  Think the drivers (and their interactions), antivirus/security programs (and their interaction) and even the HP
  the pilots themselves. HP drivers updated using Windows updates or an HP update before
  you re-installed Windows - this is a guess, since you cannot check now however if you know that information
  could help.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• my laptop stops when I connect to the internet, please help

  whenever I turn on the internet my laptop stops and it does not matter if I use it wireless or cable, stop it anyway please help

  Hello

  1. Do you receive messages before you close them?
  2. The problem occurs when the laptop connects to the network, or an Internet connection is established?
  3. What is the brand and model of the router?
  4. Who is the ISP (Internet Service provider)?
  5. What is the brand and model of the laptop?

  Method 1: Try to reset the router and see if that helps.

  Note: help on resetting the router, please consult the manual that came with the router or router contact manufacturer.

  Also the updated firmware for the router on the router manufacturer's website.

  You can also refer to:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:

  I might suggest to run a full scan with your anti-virus/anti-malware software installed on the computer and see if you find something. If necessary you can also use the Microsoft Safety Scanner:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post with the State of the question.

• Why windows Explorer stops when it encounters a unspecified problem?

  After starting my computer most of the icons display refuses to open, because a message appears which indicates WINDOWS EXPLORER MET

  A PROBLEM AND NEEDS TO CLOSE DOWN! ... this problem is not specified and no explanation given.  My computer and the operating system (Windows XP) is

  about 10 years and has worked well enough, he began to send this message two or there days tree and shuts down when I try

  to open most of the icons displayed on the destop.  What could be the reason and the solution to this problem?

  Thanks for any help anyone can give me, my name is Lothar Truderung; my e-mail address is: * address email is removed from the privacy *

  In addition to suggestions of Diana, sometimes Explorer stops due to a corrupted file system (disk).  It wouldn't hurt to try to check the disk using "chkdsk/r".  The procedure to do this is here:

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• My Windows XP stops when I'm surfing the internet

  I have a problem when I'm online, windows turns off with notice, and then it restarts and takes me into my window password. It gives me an error signature n

  Hi WalterRamirez,
   
  -What, exactly, is a transcript of the error message that you receive?
   
  -You are able to connect without any problems after entering the password?
   
  -Remember to make changes to the computer between synchronizations when things worked fine and now?
   
  -What is the name of the Module and the Version of the Module and the name of the Application and the Version of the Application that is displayed with the error message?
   

  Run Internet Explorer in no mode of modules and check to see if Add-ons are causing this issue.

  Step 1: Follow the steps in method 4 from the link below.

  How to optimize Internet Explorer

  Step 2: If the problem does not happen, the problem is caused by one of the Add-ons that typically load with Internet Explorer. In this case, follow the steps listed in the section "Automatically to disable the add-on, run Internet Explorer Add on Fix It" from the link given above.

  Kind regards

  Divya R - Microsoft technical support.

• Windows Explorer stops when right click.

  I am running Vista and when I go into Windows explore (File Explorer) I see all my files, but if I click right, or just simply remove any file, Windows Explorer closes down. I have recently upgraded to Windows 7 and the problem persists.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I disable "auto adjust in progress" message when I connect?

  I'm trying to get back to normal... after having my reinstalled windows vista premium, when I connect screen is unstable, this message appears and then the screen is correct.  Can I stop this from happening?

  Dolores

  Hi Dolores,

  1. What is the make and model on the computer?

   

  Looks like a problem with the resolution of the screen.

  Method 1:

  First to the top, try and run a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Perform step 7 to set the computer to boot normally.

  Method 2:

  Change the screen resolution

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  Method 3:

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

• Pop - up screen to record images does not appear when you connect the camera

  Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
  Guest USB? Download the pictures?

  Hello

  1. Are you referring to the AutoPlay window that appears when you connect a device to the computer?

  What is the number and the model of the camera?

  In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.

  Troubleshoot AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

• I think Windows has stopped this device because it has reported problems. (Code 43) when connecting iPod to the PC.

  Original title: Code 43 problem

  iPod is no longer detected when plugged to the USB port.  Instead, I get the following error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  Crisis averted!  On another head shot... I thought that maybe the problem could be in the sync cable since the Apple store employee had no problem with the iPod.  I bought a new cable and the computer immediately recognized my iPod.  The old cable is now in the trash.

  Thank you for your help.

  Bob

• Windows Media Player, stopping when it is connected to MPS

  I JUST GOT MY UPGRADED COMPUTER AND WINDOWS MEDIA PLAYER 11 AND NOW WHEN I CONNECT MY MP3 PLAYER IT STOPS WITH AN ERROR. BEFORE THE UPGRADE, EVERYTHING WORKED WELL HOW TO FIX THIS? I'VE DONE SOME THINGS PROPOSED WITH PEOPLE WITH A SIMILAR PROBLEM AND NOTHING WORKS, IT IS NOT THE MP3 PLAYER BECAUSE IT WORKS ON OTHER COMPUTERS

  Indiv01.key accidents can be fixed by resetting the DRM system. See instructions at http://support.microsoft.com/kb/929642 (article mentions the Zune software, but can be applied in more general cases too).

• I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

  I am trying to sync my ipod with my windows media player and when I connect my ipod windows media play is not read. How can I sync my ipod with windows media player?

  Hello

  Your MP3 player should have 2 settings - MSC that should allow the player to be used as a
  external drive and PSG that is the parameter to use to sync with WMP11. Remove the MP3
  and restart the computer. Change the MP3 in MTP mode - it power off and plug it in.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• stop windows live messenger from starting when I connect

  How can I get windows live messenger to stop opening when I connect to the computer

  http://ask-Leo.com/how_do_i_stop_msn_messenger_from_starting_automatically_and_logging_me_in.html

  To follow the Messenger from starting automatically when the connection and allow the automatic connection. Click on Tools, Options, general. Now acheck "automatically run messenger when I connect Windows" and "allow automatic connection when it is connected to the Internet.

  And read the rest of the info there re not to remember you.

  See you soon.

  Mick Murphy - Microsoft partner