Impossible to make calls to landlines at all

Similar Questions

• Impossible to make calls to the Norway with world mintues to Office 365

  Hi all

  I have a subscription to Office 365 home which inclludes 60 minutes of world each month. The subscription is activated using my account and appears in Skype and Outlook profiles. But when I try to make a call it says I have no credits and need to get a subscription or som. Is the number I try to call a landline in Norway.

  I can call inside Denamrk very well, but not to the Norway.

  Am I missing something?

  AllanMichaelsen wrote:

  Is the number I try to call a landline in Norway.

  Hello and welcome to the Skype community.

  Your account shows that you are trying to call the # Norwegian xxxxxxxx00 who is referred to as a cell phone #. If you feel that the classification is incorrect please let me know.

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Impossible to make calls due to flight mode even if it is not enabled

  Hello. I really need your pro tips on what I should do to solve my problem of z3 Xperia. I just got my Xperia z3 is about 2 weeks and it worked fine so far. The problem is I don't get any signal, as before, now I no signal at all and when I make a call, a pop-up message will light it is said "make a call, you must turn off the airplane mode", but the flight is disabled. I rest and switch my phone but nothing has changed. so please can you help me.

  That seems to be a hardware problem. You could.

  1 repair your phone with PC Companion.
  2. communicate with your network.
  3 contact your support local xperia.
  4. the sim card may be replaced.

• Impossible to make calls with windows live messenger

  original title: windows 10/11

  Hi, I downloaded windows 11 yesterday, but I deleted it because only the webcam does not work because that that he wouldn't let me go on webcam normal: /, then I downloaded windows 09 then it came up the download window 10 so I am at the moment, but the webcam does not work it let me just go on video call or call but I need to call normall so I can be with others :/

  Please help, hollie whittingham.

  hollieeee. wrote:

  Sorry, I ment windows live messenger 11 and windows live mesenger 10. The reason why I ask this question is because my web cam does not work when I press the webcam on the side that it goes straight to the visual appeal but before I downloaded windows live messenger 11 was fine, but then I deleted windows live messenger 11 because what he wouldn't do what I just said you again.

  Please help hollie whittingham

  Ah!  Then you are asked the question in the wrong place.  This forum is dedicated to Windows Vista; you will have more luck finding a solution, if you ask your question in a forum dedicated to Windows Live Messenger:
   http://windowslivehelp.com/product.aspx?ProductID=2

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty to obtain a little temporary safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest killed a large number of philosophers.
  ~ Denis Diderot

• Make sure that wire you all the inputs and outputs of your node library function call?

  This document says "make sure that wire you all the inputs and outputs of your node library function call.

  http://digital.NI.com/public.nsf/WebSearch/7253D2F0D91F68058625752F005AB672?OpenDocument&submitted&&...

  But all the terminals on the right side of the call library node considered "outputs" referred to in the foregoing statement?

  This same document continues to show the right way to allocate memory with this illustration and in the illustration, the right "outputs" are left without junctions.

  

  Am I right in assuming that the only terminals that count as outputs, those who use the code of the DLL (modify) as output?  If it is true, then all other terminals output associated with the values entered alone so don't really account as outputs, correct?

  In the parameter call-library configuration screen there is a "Constant" check box and the help that he wrote "indicates whether the parameter is a constant."  What is this box? for me in the setup of the DLL call

  Finally, assuming that a call from the DLL that is supposed to write in these five outputs, is it legitimate to use constants like this to book a space of memory for the output values?

  

  How about if local variables associated with the output terminals are used instead?

  

  Despite the linked document, it is necessary to connect the corresponding entry for simple scalar output parameters (for example a digital). LabVIEW automatically allocate memory for them. If you do not want the entries for all the output wire anyway, there should not be no difference between a constant and a local variable; I would use a constant to avoid useless local variables.

  For settings that are only entries, there is not need to connect the outlet side. It's a bit simplistic since all parameters are entered only and get one result (other than the return value), you pass a memory address and modify the content to this address, but LabVIEW manages this dereferencing pointer for you. If you want to really get into the details, learn more about pointers in C.

  The "Constant" check box acts as the qualifier "const" on a c function parameter. It tells the compiler that the function you are calling will not change this setting. If you call a function prototype includes a const parameter, then you must mark this as a constant parameter when you configure the call library function node. Otherwise, I wouldn't worry on this subject.

• Impossible to make it appear in the volume icon notification area. Have you tried all the procedures of sugested suggested on Microsoft Help.

  Impossible to make it appear in the volume icon notification area.  Have you tried all the procedures of sugested suggested on Microsoft Help.

  Try this:

  In the run box type: regedit, click OK
  Navigate to:

  HKEY_CURRENT_USER
  \SOFTWARE
  \Microsoft
  \Windows
  \CurrentVersion
  \Explorer
  \TrayNotify

  Right-click on icon stream, click on remove, restart your computer.
  The icon stream all will return.
  This works on most of the configurations.
  You may need to do a few times.

• Portege M400: Is it possible to receive and make calls with the SIM card

  Is it possible to receive and make calls with the card SIM module in the Portege M400?

  I know that you can send and receive sms messeges, which, according to me, the software is not all good because you can't hold much, and you can't send to ems or mms.

  But there may be other software here?

  Hello

  What software do you mean exactly?

  As far as I know that the MobiLink was preinstalled on some units Portege M400.
  This software supports these features:
  Send and receive SMS, composition and read TEXT messages in several languages, compose and send to multiple recipients, the mobile contacts address book support, Rich edit for the launch of URL and Email using embedded addresses.

  As you can see that you can not use this software to make calls!
  And unfortunately other software does not know me :(

  With regard to the MobiLink Communications Software Suite;
  The details can be verified here:
  http://www.novatelwireless.com/products/solutions/MobiLink.html

  Greetings

• Call a landline in Saudi Arabia

  I try to call a landline in Saudi Arabia with my monthly subscription but can't. Please give advice on why not. Thank you

  The Saudi Government stopped all VOIP calls to and from the country for a while, they have done it before and I hope that it will be temporary.

• Just updated to iOS 9.2.1 - can make calls, but not volume?

  Hello

  I have updated to iOS 9.2.1 this morning.

  Since then, I've noticed that when I have make or receive a phone call, I hear nothing on the other end.  When I turn on the speakers, I hear noises, but it is extremely "resonant" and I can't have a conversation.

  When I make calls with other applications such as FB Messenger or WhatsApp, they work perfectly.

  Any ideas?  I'm kinda a noob of techno, tried to change back to my old iOS, but for me it's impossible.

  Thanks in advance.

  I wasn't abable to call, but I can receive...

  I reboot and everything what you are looking for a good now...

  Rick

• DEFY: Cannot make calls...

  Hello

  I just bought Defy and I think that it is large, has many interesting features, but it does not call...

  About 10 minutes after it's turned on, I can't make all the calls (from widgets, dialer, contacts...). As soon as I press the dial button, a pop-up says "call time 00:00. And then the call is terminated.

  So I decided to 'factory reset '. But even after factory reset, this question is reproduced.

  I have attached two files: one is the journal when I can make a call and the other is there is not possible to make calls.

  A fact interesting, is that each time I start up (or factory reset) the phone, I can make calls for 10 minutes (approximately). After this time, if I want to call again, I have to start up the phone once more.

  To receive calls/SMS, it works fine.

  I think this phone is great, and I don't want to give it up.

  Can someone help me please?

  Thank you.

  I just found the answer.

  The problem is how Android deals with 'Blocking' and 'call forwarding '. If you try to change the settings, you can never reset these settings again...

  I tried to use my SIM card from mobile phones very simple, and all show me the message "you can not call so that the call blocking is active... ». But I never changed the settings...

  This also occurs with other suppliers of Android.

  The only solution is: go to your company and ask them to change your current SIM card to a new (not your line number, just the SIM card). And do not use the "call forwarding" and "call blocking" in Android

• Cannot make calls

  I'm sorry, I'm so much distress that I want to cry. I just got my phone on April 4. Initiall, I have no problem receiving calls and shouting. All of a sudden, I'm not able to scream. However, I am able to receive calls. What do I do? Can someone please please help me? T ^ T

  Yes, try airplane mode and the thing.

  If it does not try to restart your machine in safe mode.

  Press and hold the power botton > press and hold Power Off a message "Restart in safe mode" press Ok and then try to make a call. Just restart your device, and I will come back to normall.

  If this does not work then try

  1. turn off your device. Then remove the sim card (try cleaning the sim card) and leaving the powerd device off wirhout a sim card inserted for about 20 mins.then put the sim inside and power and then try to make a call.

  2. If nothing works, try to download PC companion on your computer or your laptop and do a repair software

• Need help to make calls in blackberry

  Hello friends,

  I need your help to make calls in blackberry OS version 6.0 and later versions.

  I write code to use, it works very well below 6.0 but on 6.0 and above all he does not.

  When I try this code on 6.0 I receive "cannot connect, call in progress.

  According to my research, this is a specific problem of the OS, but I'm not satisfied with this research.

  Actually I do an application that will dial a specific number again and again for 5 times ({at least} chosen by the user).

  Code: -.

      Application.getApplication().invokeLater(new Runnable() {
  
              public void run() {
                  try {
                      ApplicationManager.getApplicationManager().requestForeground(appProcessId);
                      Invoke.invokeApplication(Invoke.APP_TYPE_PHONE, new PhoneArguments(PhoneArguments.ARG_CALL, phoneNumber));
                            } catch (Exception ex) {
  //                    ex.printStackTrace();
                  }
              }
          });
  

  To resolve this problem, I tried for a few weeks, but no luck.

  Please help me.

  Thanks guys,.

  I found the solution to this problem,

  to fix this, I maintain a difference of 10 seconds on each call, I did.

  Thank you once again

• SIP phones to register but cannot make calls to another

  Did I miss something in the following configs? The phones are able to register, but cannot make calls to another? Should I add to the config to be able to make calls?

  Current configuration: 8173 bytes
  !
  ! Last configuration change at 20:35:57 UTC Tuesday, February 2, 2016 of wachter
  !
  version 15.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname KCC-CUCME-2921
  !
  boot-start-marker
  boot-end-marker
  !
  !
  ! type map necessary for vwic/slot-slot 0/0 control
  logging buffered 51200 warnings
  enable secret 5 $1$ fner$ un2VRxsPt6gy418Fm/tHz.
  !
  No aaa new-model
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  IP VOICE dhcp pool
  network 192.168.2.0 255.255.255.0
  4.4.4.4 DNS Server 8.8.8.8
  default router 192.168.2.1
  option 150 ip 192.168.2.1
  Infinite rental
  !
  !
  !
  IP domain name kccoring.local
  IP cef
  No ipv6 cef
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  CTS verbose logging
  !
  Crypto pki trustpoint TP-self-signed-1027156387
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1027156387
  revocation checking no
  rsakeypair TP-self-signed-1027156387
  !
  voice-card 0
  !
  !
  !
  voip phone service
  list of approved IP addresses
  IPv4 192.168.0.0 255.255.0.0
  h323 connections allow h323
  allow connections h323 to SIP
  allow connections sip h323
  allow sip to sip connections
  Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
  SIP
  binding control source-interface GigabitEthernet0/0.20
  bind media source-interface GigabitEthernet0/0.20
  Registration Server expires max 600 min 60
  !
  voice class codec 1
  preferably 1 codec g729r8
  g711ulaw codec preference 2
  iLBC codec preference 3
  !
  !
  !
  !
  Global voice registry
  FMC of fashion
  source-address 192.168.2.1 port 5060
  Max - dn 25
  Max-pool 25
  Zone 8
  Flash TFTP-path:
  create the profile synchronization 0042525408078253
  !
  interface GigabitEthernet0/0.20
  encapsulation dot1Q 20
  IP 192.168.2.1 255.255.255.0
  !
  interface ISM0/0
  IP unnumbered GigabitEthernet0/0.20
  IP virtual-reassembly in
  rescue service module
  service-module ip 192.168.2.5 address 255.255.255.0
  Service-module ip default gateway 192.168.2.1
  !
  interface GigabitEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  interface ISM0/1
  no ip address
  !
  interface Vlan1
  no ip address
  !
  IP forward-Protocol ND
  !
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 192.168.2.5 255.255.255.255 ISM0/0
  !
  !
  !
  flash TFTP server: kern2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: kern78xx.11 - 0-1 - 11.sbn
  flash TFTP server: rootfs2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: rootfs78xx.11 - 0-1 - 11.sbn
  flash TFTP server: sboot2.78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sboot78xx.11 - 0-1 - 11.sbn
  Server TFTP flash: sip78xx.11 - 0-1 - 11.loads
  Flash TFTP server: its
  Flash: copstart.sh TFTP server
  Flash: load36213.txt TFTP server
  Flash: load621.txt TFTP server
  Flash: load622.txt TFTP server
  Flash: load623.txt TFTP server
  access-list 23 allow 10.10.10.0 0.0.0.127
  !
  control plan
  !
  !
  Voice-port 1/0/0
  !
  Voice-port 1/0/1
  !
  voice-port 1/0/2
  !
  Voice-port 1/0/3
  !
  !
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default

  go to respective voice register pool and configure ' no figure collect kpml

  example of

  vocal range pool 1

  No kpml transferred to numbers

  Codec to g711u

  reset

  Then go to global registry of telephone communications and perform without creating a profile and create profile

  BR,

  Nadeem Ahmed

  Please note all the useful post.

• BlackBerry smartphone Wifi to make calls in Europe?

  I (accidentally) rec were calls at 30,000 feet on a plane of delta with my option wifi network only and after you have connected to wifi on Deltas.  This led me to believe that it is possible to make and receive calls anywhere in the world as long as I'm in a hotspot.

  I contacted my provider, T-mobile and have rec has had their hand signals.  I am about to leave for the Spain and was thinking, as long as I put my phone in wifi only, I should be able to receive calls and data without incurring roaming fees, since it's all data or VoIP via the web.

  Am I correct or off my rocker?

  Tmobile knows that your device has UMA calling.

  As long as you're connected to WiFi and showing UMA on your screen, you can make calls on your device. From anywhere in the world. And on UMA, calls act as if you call the United States, because UMA will connect to Tmobile USA servers and calls are made from this server.

  Thus, for example, while in Spain and you call via UIMA, in the USA, your call is a call USA in the USA.

  If you call the Spain to England, the call is made as if the United States, in England.

• BlackBerry smartphones can not make calls or text?

  I went to make a call on my 8310 and all I got was a tone

  don't send texts

  When you call the phone u get another tone

  some how I get voice messages if

  I have a lot of bars and that you are connected to my network

  I tried the sim card in another phone, it works

  I completely deleted the bb and reinstalled the 4.5 os.

  I went to the host and registed the phone routing table

  I did the battery pull

  I can not make calls or texts?

  Cool!
  I'm glad that you fixed it.
  Please solve the thread so that others can find your answer faster.
  Thank you

  Bifocals