Impossible to reach my office after I login
Original title: Virus or not?
I turned on my Toshiba laptop and it took me to my login page. After I put in my PIN, it took me a blue screen and, from there, I'm stuck. Don't go anywhere or get out. Can I have a virus?
List of the ICC codes generated during a BSOD
Tags: Windows
Similar Questions
-
I don't really know what I did but now I have a pop-up Windows Media Center appears asking to connect when I turn on my computer before it leaves me to the real office and I was wondering how to get rid of it, I can without quite easily but still, there is no need to when I just would rather it just do not attend all.
Open Media Center, go to: settings, general, startup and Windows behavior, uncheck, start Media Center when Windows starts.
-
after user, login and welcome screen, the screen is black no office
after user login and welcome screen, the screen becomes no black no office, no error no display nothing. did the same thing in safe mode except with the border around the black screen safemode. System Restore didn't help, nor fact startup repair. the only thing I get is safe mode with command prompt and the system recovery options. Inspiron 1526 less then years.
Hi Lilrockmike,
Thanks for posting your question on the Forums of Windows Vista.
Have you tried opening the the Task Manager on the screen by pressing CTRL + ALT + DEL?
If you are able to open the Task Manager, please follow the steps in the data:
1. click on the processes tab.
2. scroll to the bottom and check if explorer.exe is listed under the name of the image.
3. If explorer.exe is not in the list,
(a) click file and then click New task (run).
(b) type explorer.exe, and then click Ok.
(c) check whether you have the back office.
4. If explorer.exe is listed,
(a) click on explorer.exe, and then click end process.
(b) click file and then click New task (run).
(c) type explorer.exe, and then click Ok.
(d) check whether you have the back office.
If the problem is solved, I recommend an antivirus on the computer analysis.
I will recommend you to a virus on the computer scan using a good antivirus.
You can also use Microsoft Live Onecare anti-virus.
http://OneCare.live.com/site/en-us/default.htm
Hope the above information helps. Please post back and we do know.
Thank you & best regards
Ashish Gupta
Microsoft Answers Support Engineer -
Few of the virtual win XP not able to boot, office after login screen new accepts off.
Hello
I installed 12 Virtual desktop (WIN XP), and on 12, two are not able to start, when you turn it on, after the login screen again is done switch off automatically.
What could be the reason?
One last question, sometime, I saw that all the virtual office the maxmm cross limit memory only once, and then in a few minutes, come normal.
Kind regards
Mustafa Rashid
Hello
Moved to the forum of the Virtual Machine and the guest operating system.
Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.dabcc.com/channel.aspx?id=279DABCC analyst [url]
"Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url] -
Original title: search Windows 4
With Windows Search 4, the program active at the log on before you can use the start menu. Several search screens occur and reproduce when they are closed. Sometimes it's impossible to open an Office, research childcare opening application.
Hi Ken_978,
· How long have you been faced with this problem?
· Did you do changes on the computer before the show?
· The question is only limited to Office applications?
· What exactly happens when you try to open an Office application? You receive an error message?
Follow the suggestions below for a possible solution:
Method 1: I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.
Method 2: If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.
Follow the steps below to uninstall:
a. click on Start
b. click Control Panel
c. select Add / Remove Program
d. place a check on "Show updates"
e. you will see Windows Desktop Search 4.0 and uninstall it.
Reinstall back, you can see the link below:
http://www.Microsoft.com/Windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx
Hope this information helps.
-
Blue screen in Vista 7 just after the login screen
We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears. The blue screen immediately goes, and system restarts (or sometimes just hangs). I was not able to find the codes of the 7th in the research:
(took a picture of the screen...)
STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)
I am able to boot in safe mode. Do you have a chkdsk C: /F and which did not help. Do you have a repair system using the Vista startup disk and that did not help. Went to safe mode and MSCONFIG and position the clean boot and that did not help. I tried to update to SP2 and unable to complete safe mode.
The ideas and the sage advice would be greatly appreciated.
Pete
Hello
Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashCheck this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available from the OneDrive or other
file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialA disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
methods in the next message and then return to the if necessary troubleshooting tool.Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
spyware/security programs.When you get to the pilot and sections of the memory of the troubleshooter check the following message to
update drivers and memory test and then return to the troubleshooter if necessary.------------------------------------------------------------------
BCCode: 7F 0x0000007E which is also 0x1000007E
Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.
Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters
The following settings appear on the blue screen.
To view the settings, click on this link.
http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspxCAUSE
interpret, you must identify which exception has been generated.Common exception codes are:
0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
the Microsoft Windows Driver Kit (WDK).Solve the problem
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the
- Reference of the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
(the address of the exception) must identify the driver or function that caused the problem.If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .In case of exception code 0 x 80000002, the trap frame provides additional information.
If you do not know the specific cause of the exception, consider the following questions:
- Hardware incompatibility. Make sure all new hardware that is installed is listed in the
- List of Microsoft Windows Marketplace tested products.
- Service driver or defective peripheral system. A service driver or defective peripheral system can be
- responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
- and IRQ conflicts can also generate this error.
If a driver is listed by name in the bug check message, disable or remove that driver. Disable
or remove drivers or services that have been recently added. If the error occurs during startup
sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
in Safe Mode, you must start the computer by using the Recovery Console to access the file.If the problem is associated with Win32k.sys, the source of the error may be a third remote
control program. If this software is installed, you can remove the boot of the computer service
by using the Recovery Console, and then by removing the offending system service file.Check the system log in Event Viewer for additional error messages that might help identify the
device or the driver that generated the bug check 0x7E.You can also disable memory cache BIOS may try to resolve the error. You should also
Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
For more information about these procedures, see the manual of your computer.The error that generates this message may occur after the first reboot during Windows Setup, or
Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
space, reduce the number of files on the disk drive hard target. Find and delete any temporary
the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
contain fragments of file saved to disk scans. You can also use another hard drive with more drive
free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">-->
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-----------------------------------------------------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard event viewer
Windows. TIP - Options - Advanced filter allows you to see a time rather
of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.htmlHere are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen of the.
http://www.NirSoft.NET/utils/blue_screen_view.html
death ' crashes and displays information about all accidents of a table.
FreeBlueScreens many are caused by drivers of old or damaged, in particular the video drivers
However, there are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Does not work
tell all possible driver issues).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
XP Home: Any keyboard shortcut to reach the Office?
Hello
In Windows 7, the user can reach the office without having to minimize each application one by one by clicking on the rectangular button on the right side of the taskbar.
What in XP Home, can I create a button on the taskbar for that? If not is there any keyboard shortcut for this?
Thank you
Low
Hi, in Windows 7, the user can reach the office without having to minimize each application one by one by clicking on the rectangular button on the right side of the taskbar. What in XP Home, can I create a button on the taskbar for that? If not is there any keyboard shortcut for this?
Thank you
LowIf you want a keyboard instead of the quick launch icon "Show Desktop" shortcut, press
Windows key + D
(on condition, of course, that your keyboard has a key of Windows).
List of Windows keyboard shortcuts: http://support.microsoft.com/kb/126449/en-us
-
How can I reinstall Microsoft Office after reformatting and reinstalling Windows?
retrieve the package microsoft office after reinstalling
reinstall my Win Vista, is it possible to recove my microsoft office package, since I gave the CD.
Hello
See if that helps you.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
See you soon.
-
Vista Home Premium, black screen after my login and my password entry
Hi all
A month ago I bought a new Dell Inspiron 15 comes pre-installed with Vista Home Premium. Like many others I am now a problem with a "black screen" that hang up the machine after my login and my password. "
When I start the machine it seems to load normally I do it at the login screen, I select my account (admin) and enter my password. The windows logo appears, and then a status bar starts indicating that the OS is laoding. Shortly after that I get a black screen on (which means that the display is on but list black). I tried to start safe mode, but I get the black screen it so.
Like others the machine was working great until this point. I was using AVG Free edition and I am always very careful on viruses.
Can someone help me?
Thank you
Travis
Kindly stop posting the same question.
Questions are answered as soon as possible.
As it is only a monthe old, contact Dell Support as soon as POSSIBLE.
It is under warranty, for all hardware and software problems.
Report, in case of future problems.
See you soon. Mick Murphy - Microsoft partner
-
There is a folder on my desktop time I deleted a million, but keeps popping back into my office after a few minutes.
How can I remove it permanently?Have you tried to delete it in SafeMode (F8)?
Have you tried Shift Delete?
What is the name of folders and properties?
-
Impossible to reach the Adobe server
Hello
We have a problem with the connection to adobe CC.
We already checked a few sons but unable to solve our problem.
FYI, connect you to the internet via the proxy server / win10
Here is the error.
Please check the advanced solutions to errors in connection with Adobe Creative Cloud and Creative Suite applications
Other references are:
Impossible to reach on the Adobe servers, please check the firewall settings and try again
Unable to connect to the Adobe Creative Cloud Server
Cloud cannot create arrived on Adobe servers.
Concerning
Stéphane
-
Impossible to reach on the adobe servers
Hello
I am looking for a solution to the following common problems:
Impossible to reach on the adobe servers. Please check your firewall settings, check the time settings on your computer and try again.
A solution to this has been found without having to download it directly?
Thank you
Paireac
Check your hosts file.
to get help and more Advanced solutions to errors in connection with Adobe Creative Cloud and Creative Suite applications
-
Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?
Hey, if the problem has finally been fixed! I thought you would like to know the solution.
Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.
That's all. Works perfectly now. Very much appreciate your help, thank you.
-
Impossible to reach on the Adobe servers, please check the firewall settings and try again
Where download photoshop cc trail is said ^^
I tried to add adobe through firewall
I tried activation adobe inbound rules
I tried to restart my pc
Nothing works please help
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-check the file hosts for blocked entries https://forums.adobe.com/thread/1912777
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.
https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html
http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html
or
A chat session where an agent can remotely look inside your computer can help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Cloud creative support chat (all creative cloud customer service problems)
-
Hi all
Before writing this, I took the time to research online, but no luck.
I decided to buy the photographers CC package. downloaded the installer and moved forward with the installation, allowing to connect my Adobe ID and got the error:
"Download error! Impossible to reach on the adobe servers. Check your internet connection, firewall settings, and then try again. »
I don't use any antivirus or firewall, and there is no redirection port to my internet connection.
The software has been installed in a Mac Pro 2012, running the Mavericks 10.9.5. I completely uninstalled Installer used a CC cleaner App. Also went under the ~/Library/Application Support and ~/Library/Preferences moved these .plists for another clean installation but without success.
Any help will be greatly appreciated.
Thanks in advance for your help.
Hello Mohit,
Thanks for the link, but it was driving me nuts and takes me too long to understand. So, I saved all my work and formatted my hard drive with a new installation of Mac OS x.
That solved the problem.
Thank you all for your comments!
Pedro
Maybe you are looking for
-
How can I synchronize bookmarks in Firefox on Linux with Firefox on Win7.
None. I want to make them the same, as if I had only ONE operating system on this computer.
-
Sat - M70: estimated time remaining on battery
I ve just bought a Satellite M70-144 and have a question about running on battery When you use a stack operating on remaining battery time is displayed as a percentage in Toshiba Power Saver. On my old Toshiba laptop and other portable I ve used, the
-
SATA HDD mode & performance on Satellite P100-222
Hello everyone! I found that my HARD drive in instead of ATA7 UDMA5 mode supported. It looks like SATA ACHI is disabled in the BIOS, and I find no way to turn it on. It is clear that even faster UDMA5 then the drive HARD, but what about NCQ & other S
-
Update the graphics card Drivers (Y570)
So I have visited the GeForce site and seen that there is an update if I searched the GT555M drivers. However, I also read that this isn't really a good idea to upgrade the graphics drivers unless they are from Lenovo because of Optimus technology. S
-
How can I reset my default settings file Association
Well I'm finally rid my problem of virus with Super Anti virus... I was severely infected... A ran the software and quaranteened malicious software. Now, however when I try to click onb an icon, an open "Open with..." dialog box Cannot open applicati