Impossible to upgrade a LR1 or a Catalogue of LR2 and LR3, LR4

Similar Questions

• Impossible to upgrade, receives the message - Windows 7 build 7601 and this copy of windows is not genuine

  Original title: Please help me!

  Hello

  IM using legal windows 7 ultimate and I go to control panel, then upgrades to windows, because I wanted to get my updated pc updated so I started to update and when he finished I asked me to restart the computer now or the manual later so the upgrade will be activated or something like that. I chose here to my departure from pc restart as usual, but when I check the desktop after restart, I saw in the bottom right there is a text that I've never seen before. The text says Windows 7 build 7601, and this copy of windows is not genuine. I don't know how to remove it. And I don't know I got her here, because I have legal windows not purchased second hand or something like that. I used my computer with this window for 1 and 3 or 4 months and I have never see this before. Please help me how to solve this problem.

  Download and run the MGADiag tool from the link below.  When it is finished, click the button copy and paste the results into a response.    https://go.Microsoft.com/fwlink/?LinkId=52012

• Impossible to upgrade... have downloaded several times, running, yet old version etc. Advisor

  Impossible to upgrade to latest version

  Your string UserAgent in Firefox is probably messed up by another program you have installed.
  
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  
  If you see the warning, you can confirm that you want to access this page.
  
  Filter = general.useragent.
  
  Right click the preferences that are "BOLD", a line at a time, select reset.
  
  Then restart Firefox

• Pavilion P6-2330: Impossible to upgrade successfully from Windows 8 to 8.1

  I've updated Windows all files by following the instructions, updated the BIOS and back to the top of my files. I followed all the instructions and the result is a Windows 8.1 installation no funcitoning in which the screen keeps refreshing, sometimes bring back all the icons on the desktoop or simply refreshing do not at all. The courses is visible and sensitive, in part, but nothing is operational.

  The screen flashes could be a monitor driver problem that I also checked and nothing was. I simply can not properly finalize the upgrade! This is the first time in my life with Windows (since it first came out) that I can't magage to install an upgrade.

  Whatam I have lack?

  Thank you

  Rodrigo

  Software deals with mysterious way: I finally managed to get the Windows operational 8.1 upgrade. the process was complex, multi-tasking and boring and goes more or less like this:

  1. first of all, make sure that your Windows 8.0 has all the updates that are available. Then, go to the command prompt and run the SFC \SCANNOW utility. You can find corrupted files and secure them.

  2. then install the upgrade for Windows. It will certainly install and appear to the system, but it will not respond and will present a flashing screen. Do not despair!

  3. restart the PC and hold the F11 key, until you get a blue screen with a list of languages. Choose one (probably English) and go to the page with the REFRESH and RESET the buttons of your software. Hit refresh. If it doesn't, try the RESET button. In my case, it offered to re - install - surprise, surprise - 8.1 of Windows, and it worked!

  4. After installing Windows 8.1 running an UPDATE OF FILES of WINDOWS before doing any other thing on your PC.

  It took me more than 2 1/2 weeks and several reinstl = all 8.0 Windows until I understood.

  Thank you for your kind assistance, Mr. Nuccii!

  Have a great week!

  Rodrigo

• Impossible to upgrade the schedular schema from 10g to 11g

  Hello
  
  Im doing an upgrade of the schema S_NQ_SCHED from 10g to 11g, its failure to upgrade, while the review, he throws the error in the log below:
  
  
  [2012-03-16 T 12: 09:21.363 + 02:00] [BIPLATFORM] [ERROR] [update. BIPLATFORM] UPGCMP-05001: table 10 g S_NQ_SCHED. S_NQ_JOB. Oracle.IAS.mrua.plugin.BI.DBTable@6a493b65 does not use the default columns.   He can't be updated[2012-03 - 16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01008] [update. FrameworkMR] review of the scheme has failed for Oracle's BI platform.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. FrameworkMR] Cause: upgrade framework determined that the review of upgrade phase failed for the named component. This is often due to a the prerequisite check failed. No patterns changes have been made to the component that failed. Action: Check the log files upgrade for the cause of the message. Fix the source of the problem if possible and start the exam. Do not have to perform a real upgrade upgrade all components unless mode to succeed during the review.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01015] [update. Specific software components FrameworkMR modules] some update of the repository report the failure.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. Cause FrameworkMR]: one or several modules specific to software components returned a status of error during upgrade from the repository. A few other components could be upgraded successfully. Action: Review upgrade logs to determine which components have failed and locate the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to restart the upgrade.
  [2012-03-16 T 12: 09:21.379 + 02:00] (Framework) [NOTIFICATION] [update. Finishing frame] examination of the components.
  
  
  
  Kind regards
  KK

  KK,

  When we install OBIEE 11 g, we run a repository creation utility (RCU) creates two schema called schema of metadata (MDS) and BIPLATFORM.
  The planner of all associated tables were created in the BIPLATFORM schema.
  If Enterprise Manager (EM) takes these patterns automatically and executes BI 11 g Planner services.
  Connect with the BIPLATFORM schema in the data source. Here we can see the Scheduler tables S_NQ_JOB, S_NQ_INSTANCE, S_NQ_JOB_PARAM, S_NQ_ERR_MSG which are born already when we ran RCU related

  For more information,.

  http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-OBIEE-11g.html

  Thank you
  Oldia...

• Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications

  Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications & iTunes the correct ID is set but not in the settings/iCloud

  Is this a separate id, or you have successfully updated the primary e-mail address on the account? You can disconnect an account iCloud through settings > iCloud > Sign Out, and then log back from the other/updated id to update

  If you have updated the main email address: what to do when you have changed your Apple ID email address or password - Apple support

• Since I upgraded my MacBook Pro does work ' t toolbar, and safari crashes constantly. How can I solve this?

  Since I upgraded my MacBook Pro does work ' t toolbar, and safari crashes constantly. How can I solve this?

  Turn off the Suggestions of Safari in the preferences/Safari/search / uncheck Safari Suggestions.

  Latest issue of the Safari search bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

• How can I get my ATV 1st gen upgrade 3.0.2 for stream TV movies and pictures of my computer again?

  I upgraded to 3.0.2 on my atv1 and now I can not continuous to the atv1 even if the computer is connected.  I can only sync and not the jet.  What happened, what should I do?  I see all of these videos on release, making what to do?

  Beast Hi Spartan,

  Thank you for using communities Support from Apple!

  I understand from your question, that streaming of your iTunes library to your Apple TV (1st generation) does not work as you would expect after an update. To resolve this situation, I suggest you read the information in the following article to ensure that your Apple TV is paired with your iTunes library.

  Pair Apple TV with your iTunes library

  1. Make sure your computer is turned on, and iTunes is open.

  2. On your Apple TV, choose settings > computers > add shared iTunes library and make a note of the code.

  3. Click on the button of the Apple TV near the top left of the iTunes window, and then enter the password.

  Elements of stream to your TV

  1. Pair Apple TV with your iTunes library, if you have not already (see instructions above).

  2. Make sure that the computer you want to stream is turned on and iTunes is open, and then do one of the following:

     • Stream your iTunes library: on your Apple TV, choose settings > computers, and select the iTunes library you want.

       The content in your iTunes library on Apple TV. To play an item, select it.

     • Spread the pictures on your TV: click the Apple TV near the top left of the iTunes window, click on Photos in the sidebar on the left, choose the photos you want to share and click on apply.

  Note: Although the content is to be listened to, the computer must be on (not in mode "sleep") and iTunes must be open.

  To turn off streaming, click on the Apple TV button in the upper-left corner of the iTunes window, and then choose "show only items synced on my Apple TV.

  12 iTunes for Mac: play the items in your library iTunes using Apple TV (1st generation)

  Best!

• I bought a used under Windows XP SP2 desktop computer. I need to upgrade to SP3 to run MS Office Home and Student 2010. I was not able to be upgraded. Help!

  I bought a used under Windows XP SP2 desktop computer.  I need to upgrade to SP3 to run MS Office Home and Student 2010.  I was not able to be upgraded.  Help!

  If I where to install SP3 I would choose to download the
  file and don't use automatic updates.

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en
  OR http://www.microsoft.com/en-us/download/details.aspx?id=24

  How to obtain the latest Windows XP (support CD or download) service pack
  http://support.Microsoft.com/kb/322389

  Your computer must be at least level SP1 or SP2 SP3 will not be
  install on XP Gold.

  I would also create a "save image" of my front disc
  to install SP3 just in case you have problems.
  Not having any Image backup software:
  Try the 'True Image' (has a 15 day trial version available)
  http://www.Acronis.com/homecomputing/products/TrueImage/

  If you use a third-party firewall brand, of course, it is up to date (latest version)

  Install SP3 in mode "clean boot":
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Overview of Windows XP Service Pack 3
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=68c48dad-BC34-40be-8d85-6bb4f56f5110&displaylang=en
  Don't forget to download and read the file titled "overview of Windows XP Service Pack 3"
  Note: "you can run the package of SP3 update on any edition of Windows XP SP1 or SP2."

  The space of hard disk required for Windows XP Service Pack 3
  Describes the space of hard drive required for installation
  Windows XP Service Pack 3 (SP3)
  "For a PC on which Windows XP is already installed"
  http://support.Microsoft.com/kb/947311/en-us

  Install Windows XP Service Pack 3 (SP3)
  http://TechNet.Microsoft.com/en-us/Windows/cc164204.aspx

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929/en-us

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480/
   
  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  J W Stuart: http://www.pagestart.com

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• Can I upgrade to vista without deleting my xp programs and files?

  upgrade

  Can I upgrade to vista without deleting my xp programs and files? I don't want to lose my programs/files downloaded, but I don't want to argue with remove them and reinstall later

  Yes, you can perform an upgrade "On the spot" and all your personal data and software applications will be available in Vista (provided that they are compatible Vista).

  As always, you should create a backup Image in XP before you begin the upgrade, just in case. Also check that you still have your XP product key. If this isn't the case, then use one of the below product key finders.

  Also: http://windows.microsoft.com/en-US/windows-vista/Upgrading-from-Windows-XP-to-Windows-Vista

  -The key finder software product-

  Here are some utilities, which will display your product keys:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html

  Note: Also check the side of your PC case or at the bottom of the laptop for the
  Key OEM code. If there is a sticker with the code, it will probably not
  corresponds to what is displayed by the utilities mentioned above as OEM such as
  Dell use an internal key code when they build your PC.

  The key on the sticker code should be used with your Windows CD
  (who came if everything goes well with your PC) If you need to reinstall Windows.

  --------------------------------- Image Backup Software ---------------------------------------------

  Acronis True Image 2011 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/TrueImage/
  The version comparison: http://www.acronis.com/homecomputing/products/trueimage/comparison.html
  True Image User Guides and documentation:
  http://www.Acronis.com/homecomputing/download/docs/

  Free alternative:
  EASEUS Todo Backup home V2
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/

  J W Stuart: http://www.pagestart.com

• Impossible to install the drivers of Etherner controller; SM BusContoller and USB 2.0 - ORW

  Original title: Windows 7 Home Premium.

  Impossible to install the drivers of Etherner controller; SM BusContoller and USB 2.0 - ORW.

  You are welcome. Please check the answer.

• upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day

  upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day:

  problem started when I upgraded to WIN 8.  I get the dmp file but I don't know what to look for.

  I tried an error: see attachment

  I use a DELL optiplex.

  John

  Hi John,.

  Thank you for your response.

  This issue may occur if a computer hardware component is damaged, malfunctioning, or if an incompatible driver is installed on the computer.

  I suggest you follow the methods and check them off below if it helps:

  Method 1: I would say that you want to run cleanup start and check if it helps.

  https://support.Microsoft.com/en-us/KB/929135?WA=wsignin1.0

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.

  Method 2: I suggest you install the latest video drivers on the manufacturer's Web site as below.

  http://www.Dell.com/support/home/us/en/19/products/?app=drivers

  F or make reference to follow the article below you.

  http://Windows.Microsoft.com/en-us/Windows/install-upgrade-activate-help#install-upgrade-activate-help=Windows-8&V1H=winrttab1&V2H=win8tab1&V3H=win7tab1&v4h=winvistatab1

  Hope this information is helpful and let me know if you need additional assistance.

  Thank you.

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)

• I bought an upgrade from lightroom 5 to 6 (not cc) and when I try to update to get the latest patch for my camera (fujifilm t10) I am installer of clouds taken on creative and lightroom 6 cc and inviting me to open. nothing happens when I click on for the

  I bought an upgrade from lightroom 5 to 6 (not cc) and when I try to update to get the latest patch for my camera (fujifilm t10) I am installer of clouds taken on creative and lightroom 6 cc and inviting me to open. nothing happens when I click the icon. I had already downloaded a demo for creative cloud but decided against the purchase of this

  Hi artprints.

  You can install the update from Lightroom 6 from this link: keeping up-to-date for Lightroom