Impossible to use Ctrl + Alt + Delete key combination on the Windows Server 2008 operating system

Similar Questions

• [Beginner] Impossible to use Ctrl + Alt + Delete

  I have a VM installed on a computer (OS: Win 2008 Server), and I try to access using desktop connection remotely.  However, I would like to know how to use commands such as CtrlAltDel from my remote machine.   I have to work this way because I need to take screenshots of antoher machine.

  : S

  In a session RDP, ctrl-alt-end sends a ctrl-alt-del to host RDP.  See table 8-3, a little old mode 3/4 down, for the other RDP key combinations.

• have to use Ctrl alt delete to free gel

  I am running Vista on a PC that blocking costs one time office, which is released easily using Ctrl alt delete, but often then freezes when changing windows or starting an application like FireFox, or get into a game, all can be released easily using Ctrl alt del which shows me that the problem is not a minor.

  I have a more serious problem regarding anything on the disc using Nero burning which even if it has been installed does not start and eleiments not be found even if they show in the Control Panel programs and features. I also tried to uninstall, but it says I need the administrator privileges, even if I'm the only person who uses the PC.

  Any help would be most appreciated, thanks in advance

  John.shaw56

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. have you logged as administrator?

  Method 1:

  Check the link and try to optimize the operating system.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  See also:

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  Method 2:

  I would say as you to see the link and check if it helps:

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Service using SRVANY. EXE has stopped working on Windows Server 2008 R2

  I have a Windows Server 2008 R2 (64-bit) server that runs as a service for several years a virtual machine VMware Player.  I used the SRVANY old Resource Kit tool. EXE to configure the Windows 8.1 virtual machine to load and run in the background.  This config worked without problem for years and through at least an upgrade of the virtual machine operating system.

  02/06/16, I upgraded VMware Player to version 12 and later upgraded the virtual machine OS Windows 8.1 to Windows 10.  After that, the service that I created using INSTSRV and SRVANY is more years launches the VM.  The service seems to start with success (no errors), but the virtual machine does not start.  I don't see a new instance of the vmplayer.exe process when I start or restart the service.

  Other changes on the Windows Server 2008 R2 server since the last SRVANY config worked were last month security patches.  I have a hard time to believe that upgrading the guest OS could have no relevance here.

  To troubleshoot, I tried vmplayer.exe followed of the file name of the VMX virtual machine from a launch command line.  This works.  However, if I try to run the same exact command from a CMD, launches of VMware Player interface file, but I get a "file not found" dialog box, and the virtual machine does not start.

  I also tried reinstalling VMware Player 12 and temporarily return to VMware Player 6.  None worked.

  Ideas?

  Subscribed to the thread and ping relevant resources.  Good luck

• I downloaded the Windows Server 2008 R2 SP1 180 trial version. How can I get the key?

  Hi, I want to install the Windows Server 2008 R2 SP1 180 trial version. I downloaded from:
  http://TechNet.Microsoft.com/en-us/evalcenter/ee175713.aspx

  but I don't have the key. How to register and get the key.

  Another question:
  Is it possible to install Windows Server 2008 R2 SP1 180 trial version as a virtual server on my Windows 7 Home premium version? If Yes, how can I do it, because it seems Windows 7 Home premium version do not support Windows Server 2008 R2 with SP1 as machine visualization.

  Thank you.

  Assessment of any version of the software Windows Server 2008 R2 SP1 does not require entering a product key.  Thus, no product key is issued.

  Q. "is it possible to install the Windows Server 2008 R2 with SP1 180 day trial version as a virtual server on my Windows 7 Home premium version?

  A. no, it is not supported.

• I have a Windows Server 2008 R2 system. I use Adobe Acrobat Pro XI. I'm looking for the place where I can change the default font of Calibri Minion Pro? Tools, content editing, formatting

  I have a Windows Server 2008 R2 system. I use Adobe Acrobat Pro XI. I'm looking for the place where I can change the default Miinion Pro to Calibri font?

  Tools, content editing, formatting

  You can't change it.

  Tuesday, January 13, 2015 11:22, tonywaidmann [email protected]>

• I can't get the full window with tabs, or other controls. I have to use Ctrl-alt-delete to close the window.

  After loading on KnightNews link, all the stuff missing header - box of Firefox, minimize button, remove the button and the only way out of the KnightNews was Ctrl-alt-delete. I now find that any time I use Firefox, I have the same problem. I deleted the program, reinstalled, did a restore of the system, all to nothing does not. When I click on Firefox to open it, the full window appears briefly, then the whole screen is filled with the opening page Firefox. By clicking on a program in the historic area brings up, but it's the same scenario - Ctrl-alt-delete is the only way out. I also was not able to open the troubleshooting information that was below on this page.

  Do you get toolbars showing if you move the mouse to the top of the window?

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

  You get the system menu via Alt + space?

  You can check the problems caused by a corrupt localstore.rdf file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• No mode of the Tablet CTRL + ALT + DELETE key or Windows security?

  I just bought a laptop / Tablet HP TX2-1020US that came with Vista Home Premium.  Good so far.  I upgraded to OS to Vista Ultimate and my original SBS2008 domain-joined and worked on a large too.

  The problem is: when I'm in tablet mode, no button is "Windows Security" referred to in the prompt "press CTRL + ALT + DELETE or Windows security" in the starting System.  I end up having to convert portable mode, press CAD and convert again in tablet mode and use the biometric login each time.  Same thing to unlock the machine after an invocation of the screensaver, etc..

  HP support says they don't support "as sold" configuration, even if I am invited for an upgrade as it sets up for the first time, I am on my own if I do.  Not a very "the computer's personal again' approach to customer service... ;-)

  I thought I could reassign a touch on the surface of the Tablet--maybe the button "Mediasmart" I wouldn't need otherwise.  But the upgrade apparently took a toll on that too since the dialog box control Tablet PC Panel, in the general and the tabs button, I decidedly enigmatic after the upgrade and the tablet button ID is displayed as @BttnCmn.DLL,-2, -9, -7, etc. (for example the change in screen orientation button is @BttnCmn.DLL,-9).

  I would appreciate a solution that is running boards - the need to press CTRL + ALT + DELETE and brings me directly to where a slip of the finger is a login, or a reallocation of button so I could tap without having to disable-tablet-mode each time.

  Thanks in advance,
  Richard

  And one possible answer is:

  1. Administrative Tools | Local security policy
  2. (Elevation of privilege)
  3. Local policies | Security options
  4. Interactive logon to change: don't require CTRL + ALT + DELETE to "Undefined" to "Enabled".
  5. Close local security policy tool.

  CTRL + ALT + DELETE screen is bypassed, and the login screen is used instead (for which the fingerprint reader works fine).

  Thank you
  Richard

• Why don't I have to use Ctrl + Alt + Delete to use my computer?

  My PC starts directly from the windows 7 desktop.  How ever I can not click on the Start button.  If I open a desktop application I can't click any function on it once it is open.

  To have access to my PC, I have to Ctrl-Alt-Delete.  So I have to left click anywhere on the screen (not any text or button).  Then I can click on the Cancel button.  Once I did, I can use my programs as usual.  I have to do this every time I start my PC.  This problem exists from the outset, even though I have repeatedly re-installed Win 7 as a 32-bit and a 64 bit OS.  Since the first office sometimes.
  I have also not drag and drop functionality.  I can't drag my around my office desktop icons, for example in the trash.  This was not always the case and it takes place after the service of some or other update.  I spent this morning of uninstallation of updates as much as possible, until finally after a reboot, I could drag and drop from the desktop icons.
  A program that was unaffected by the problem of drag / move is iTunes.  I can drag tracks/albums from iTunes to a windows Explorer folder, but not a file Explorer windows to another.  I have to use the dialog box copy - paste on the right click of the mouse.
  What this problem is, it also affects Google Chrome by preventing the features left click on any of the control buttons.  By clicking a new tab, close...
  I'd appreciate a lot any input on that.
  My best regards,
  Duncan

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
  -
  I hope this helps.  Good luck.

• Cannot access by using CTRL + ALT + DELETE Task Manager

  original title: when I click CTRL + ALT + DELETE

  When I click CTRL + ALT + DELETE and I click Start the Task Manager I want to end a process, but the Task Manager does not appear or the display when I click it. I tried to restart and it still does not work. How can I fix it?

  It starts with other methods?

  1 / right-click the taskbar and select "start Task Manager".
  or
  2 / ctril-shift-esc pressed together.
  You can open it in safe mode?
  Are you aware if you had a malware attack lately? I'm not saying that it was the malware but just in case, download, install, update (by right clicking on its icon and 'run as administrator' then go to the update tab) and run a complete scan with free malwarebytes.
  Then try a sfc/scannow to see if it detects and corrects any errors.

• What Version of Windows to use when downloading IE 9? Maybe that Windows Server 2008 32-bit

  I have Win XP on my computer and wanted to tp download IE 9, but I do not know what Version of Windows to use when the XP is not listed as on versions.  I think it might be Windows Server 2008 32-bit, but I'm not sure.

  IE9 is not available for Windows XP.

• Is there a way to change the ctrl + alt + delete keys unlock to not require the password in Windows XP - SP3 computer?

  I hit CRL + ALT + DEL to lock my computer (XP SP3). When I press CRL + ALT + DELETE to open a session back (unlock) is application name to username/password instead of just remember my user name and only to enter the password.  How can I just change this behavior just ask for my password?

  See if this article helps you:

  "You cannot change the display behavior of the display of the user with the user ID name when a Windows XP-based computer comes out of the locked State"
    <>http://support.Microsoft.com/kb/837022 >

  HTH,
  JW

• CTRL, ALT, delete to log on to Windows 7?

  After weeks without a problem, Windows 7 at the opening after its judgment, reached a screen saying "CTRL, ALT, del to log on. Should that always appears and how do you it on a Mac? CTRL

  If your Mac has no key supprimer delete forwards, press Ctrl + alt + fn + DELETE.

  When you hold the fn, pressing return back/delete will act as the delete key before required to connect to WIndows.

• BOOTMGR is missing, press Ctrl + Alt + Delete while trying to install Windows Vista Home Premium 64 - Bit

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Now that I got my 64-bit Vista in the mail and quickly install disc he jumped in my DVD player. The installation process went well until I was asked to choose which hard drive, I tried to install Vista on. I tried to format my hard drive to this screen, I was working with Vista 32 bit before that and saw no need to divide my two work machine with two separate versions of the same operating system. After formatting the hard drive, I have been unable to click on the 'next' button and engage the next step of the installation process. There was a message is displayed to the bottom of the window, as well tell a word about the installation of a machine already running windows. I would be happy to provide further information to the topic of my problems during this step, but my problems do not stop here.

  After you notice the message described above and do not get farther in attempts to install later, I decided to try to reinstall the 32-bit version of Vista and then maybe try to upgrade to 64-bit. However when I put in the CD at retail, rather than receive messages at the start of a disc, I have met with the harsh reality of "BOOTMGR is missing Press Ctrl + Alt + Del to restart." Since then got trapped in a painful loop switching between disc 32-bit and the 64-bit disk in the hope that it would finally let me begin with him.

  In addition to this logically faulty tactics, I also searched some online solutions. I made sure that my DVD drive is first in my boot order. My computer will not yet make Flex and give me the ability to boot from a disk.

  My question is this; How can I get my computer let me boot from a disc again?

  I will probably also need help to drive problem hard he, but as I can not even in a position to provide information on this issue at the time I need to have the above resolved dilemma first.

  Hey ClockworkOtter

  You can't go from 32 bit to 64 bit

  There must be a clean install

  links below have very good tutorials on a clean install of vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  http://www.winsupersite.com/article/showcase/Windows-Vista-installation-Super-Guide-part-3-clean-install-Windows-Vista.aspx

  Walter, the time zone traveller

• Cancel the mapping of space used Dell PS4100 SAN on the Windows Server 2008 R2 Hyper-V cluster.

  Is Dell has a tool to undo the mapping of used space of deleted VMS or data on the volume/LUN, the SAN from Dell does not give space automatically if you delete data. Volume/Lun is thick.

  You must install the HIT / ME tool and use the EqlReThin utility.  If you download the 'Dell EqualLogic Host Integration Tools for Microsoft Installation and user guide' on the support site, there is a description on how it works.

  -joe