I downloaded the Windows Server 2008 R2 SP1 180 trial version. How can I get the key?

Similar Questions

• Impossible to install KB2790655 - Windows Server 2008 R2 SP1

  Hi all

  Having the "all TCP/IP ports are a matter of TIME_WAIT state" on Windows Server 2008 R2 SP1 which has been fixed in hotfix KB2553549. After searching for updates replaced for KB2553549, I found KB2790655. When I try to install it, I get the error "this update is not applicable to your computer".

  I am currently,
  N ' is not connected to the internet

  -With the help of x 64 versions of windows updates (64 bit OS)

  -Using the Intel Xeon processor

  What I tried,
  Installation/update of system tool bar. He has successfully installed and running but no dice with KB2790655.

  -Verified in triplicate that the update is already installed on my computer.

  My current issues at the present time are,
  -A security update KB2790655 replaced? I was unable to find anything after about 30 minutes of research.

  -Are there any required pre-reqs for this 2008 R2 SP1 security update? I don't see any other than the Windows RT pre - req.

  -Could you my TCP/IP TIME_WAIT problem cause problems with windows update?

  -My next step connects to the internet to try to download the update directly?

  Links,

  https://support.Microsoft.com/en-us/KB/2553549

  https://TechNet.Microsoft.com/library/security/MS12-032

  https://TechNet.Microsoft.com/library/security/MS12-032

  Thank you!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008 R2 SP1 AHCI RAID change

  Hello

  OS: Windows Server 2008 R2 SP1
  Storage: 1 x SSD
  Tip: Supermicro X9SRW-f

  Currently, the SATA in the BIOS option is on AHCI. Start Windows on the desktop without problem.

  Objective: Convert AHCI Raid mode. The integrated chipset to create a matrix to mirror with 2 x SSD.

  I downloaded the disk driver for this card and installed the Intel Rapid Storage driver/software. I reboot and switch the SATA Raid mode. Windows starts to load and immediately blue screens. Put the SATA to AHCI mode allows me to boot successfully.

  There are a few other drivers from the disc. Install these drivers, the windows are no longer boot in AHCI or Raid mode.
  iaStorA.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver
  iaStorB.inf: installs rest AHCI Raid Controller Miniport + RTS filter driver

  HKEY_LOCAL_MACHINESystemCurrentControlSetServicesMsahci\\\ (set to 0 Start)
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV (set to 0 Start)

  How can I activate the raid option and get Windows to start without error? Registry hack? Other drivers?

  * Note the OS has been cloned for the SSD. I don't have the option for the new Windows installation.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Installation of Windows Server 2008 R2 SP1 problems

  Since the recent release of Windows Server 2008 R2 SP1, I have since downloaded the ISO from Microsoft (SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO) and tried to install it on my sandbox (ESXi 4.1.0 260247) and I will have questions.

  The problem is that Windows does not have a driver for the SCSI controller device.  I tried to change the type of "LSI Logic SAS' to 'LSI Logic" parallel "and it does not solve the problem.  I tried to download a Windows 2008 LSI SAS of LSI driver directly (http://www.lsi.com/storage_home/products_home/standard_product_ics/sas_ics/lsisas1068/index.html) and use it, and still have had no luck.

  I was wondering if anyone has had any success in installing Windows 2008 R2 SP1 on ESX or ESXi 4.0 or 4.1?

  

  See you soon,.

  Ken

  Hi Ken

  It is the same as the previous one:

  SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008_R2_64Bit_English_w_SP1_MLF_X17-22580. ISO

  concerning

  Pieter

• Download manager for Windows Server 2008 R2 Evaluation (180 days)

  Hello

  I want to download Windows Server 2008 R2 Evaluation (180 days). Walker I click the option given on http://www.microsoft.com/en-us/download/details.aspx?id=19994, it starts to download the software without any download/Transfer Manager. I'm the challenge is stopping the download due to any reason (I don't know if it's the internet connection problem or what else)... and when it starts again it starts with 0%, i.e. all the stuff downloaded until then are all is lost.
  Is there any download/transfer manager that I can use, which will resume the download in case of problem mentioned above?
  Kind regards
  Pravin

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Range of printers PhotoSmart c4780 HP; Windows Server 2008 R2 SP1

  Everyone found a way to install this printer on a running Windows Server 2008 R2 SP1 print server, or a work-around pilot?

  Hi JamesRMarvin,

  Follow the instructions below to install the driver for 990c for printing on the server.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmar C4780 using this driver. I would like to know if you have the same problem?

• T330 incompatibility of Windows Server 2008 R2 SP1 install USB 3.0

  The T330 has no native support for USB 2.0.  Installation of Windows Server 2008 R2 SP1 media has no native support of USB 3.0. Installation of the OS then the mouse and keyboard do not work.   I tried to inject the drivers USB 3.0 into Server 2008 Windows ISO (see: https://www.dell.com/support/article/us/en/04/SLN300618/en ).   Injection in ISO works fine and it solved the problem of no keyboard or mouse to begin the installation of the OS

  BUT once the base OS is installed and you come to the first post install screen (when it is now booting from the hard drive) to change the password and proceed with the installation, the keyboard and the mouse are again in opening.    My best guess is that the USB 3.0 drivers do not get installed on the hard disk.  I tried to start again and reinstall the operating system but same result.  The creation of the ISO by KB post above was clean and efficient.  No errors.

  "I saw a different Dell ' Faq ' recommend to disable USB 3.0 is the BIOS OF THE system.  On this current - nine T330 - model, BIOS update, there is no BIOS setting/option.

  Looking for a solution.   Had an old PCI USB 2.0 card, but the machine has no PCI ports.  Consider trying a USB 2.0 PCIE card.

  What is amazing, is that Dell sells the T330 No. USB 2.0 compatible - installation of SP1 W2008R2 difficult and perhaps impossible.  NOTE: this OS is a Dell supported OS for the T330 I would not have bought if it wasn't supposed to be supported (I am restoring a DC with this OS due to a mother failed on a server of EP).

  Solved: Bought a PCIE USB 2.0 card. This works.  Model is Sonnet Allegro USB PCIe (2.0).

  If I had known, I would have just bought the thing and ignored the whole pilot injection exercise.

• I bought Adobe Acrobat XI Standard for Windows.  I now have an iMAC.  How can I get the download for my iMAC?

  I bought Adobe Acrobat XI Standard for Windows.  I now have an iMAC.  How can I get the download for my iMAC?

  You must run a swap of platform. Serial numbers are platform specific.

  Exchange a product for a different version of the language or platform

  Mylenium

• I'm new to CC.  I discovered that I had to download first CS6 inorder to get it. (May not yet know how to get the title templates, etc. cannot understand instructions; but I spread) I see that it still says trial.  How can I get the

  I'm new to CC.  I discovered that I had to download first CS6 in@order to get it. (May not yet know how to get the title templates, etc. cannot understand instructions; but I spread) I see that it still says trial.  How can I get the full thing.  I am a Subscriber complete cc

  I don't know what you've done, but here are the instructions to install the PProCS6 and the callback with a cloud account

  Yet the instructions http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html if you have a subscription

  - and the difference in the Cloud application manager 2015 https://forums.adobe.com/thread/1906752

  Still will not run as a trial, it is enabled when you install and activate PProCS6

• I try to upgrade my old vista laptop to win7, but don't remember the product key for my computer compaq laptop. How can I get this key?

  * Original title: get the product key

  I try to upgrade my old vista laptop to win7, but don't remember the product key for my computer compaq laptop. How can I get this key?

  Hello

  Your question is not very clear to understand.

  If Vista is preinstalled on your laptop, this product key is NOT for Windows 7.

  There is a free upgrade from Vista to Windows 7 years, but that offer expired for a long time.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your Windows 7 update will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Option of upgrade Windows 7 program runs from June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.

  Microsoft sells more than Windows 7, but it does NOT come for free.

  Try Amazon.com, etc.

  ___________________________________________________________

  And if you ask to transfer the license of Windows 7 from a mobile to another laptop:

  You tell us what type of license you have.

  If the laptop came with the preinstalled Windows operating system (Dell, HP, Acer, etc.), this product key supplied with the laptop is preinstalled OEM license and is not transferable.

  OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) is related to the first machine it is installed on and dies when dies of this machine.

  The above applies also to OEM system builders licenses.

  License of operating system in detail, that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  ___________________________________________________

  And please read this, you can:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/licensing_faq.aspx#fBid=cbW6pY-wjS6

  @@@@@@@@@@@@@@@@@@@@@@@@@

  If you had a 7 upgrade that you have bought yourself on the HP laptop, use programs Key Finder for the PK:

  http://www.Belarc.com/free_download.html

  https://www.magicaljellybean.com/KeyFinder/

  See you soon.

• My free trial of Illustrator 2015 crashed and burned after 2 days of trial. How can I get my trial free back before buy you. and if I decide to buy it, will I get another version to download. As I'm not crushed version tha

  My free trial of Illustrator 2015 crashed and burned after 2 days of trial. How can I get my trial free back before buy you. and if I decide to buy it, will I get another version to download. As I don't want the broken version that will not reopen.

  Cindy,

  I believe you can reinstall right under the trial, use preferably the full path in three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

  The cleaning tool works for all versions of CS3 on (you can see the top of the page).

  Here are the instructions for use, including individual applications:

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

• I bought a version student Adobe 3 years... my computer has recently had to be reconfigured, I want to save my copy again, but cannot locate the registration key! How can I get a key please.

  I bought a version student Adobe 3 years... my computer has recently had to be reconfigured, I want to save my copy again, but cannot locate the registration key! How can I get a key please.

  Please refer to find the serial number of your product Adobe quickly

  Hope this will help you.

  Kind regards

  Hervé Khare

• What is the latest version of Flash Player, I can download for Windows Server 2008 x 64

  On the Adobe Flash 14.0.0.145 download site it states that Windows Server 2008 (32-bit)?

  
  

  Hi banklander,

  14.0.0.145 is the latest version of 64-bit Windows Server 2008.

  --

  Maria

• vCenter Server 4.1 U1 Installation on Windows Server 2008 R2 SP1 x 64 does not work

  My vCenter Server Installation in my test environment failed with the following error:

  

  I couldn't find any article yet. Windows Server 2008 R2 x 64 SP1 is supported as a virtual machine but not not to host the virtual Center Server?

  Help, please...

  Hello.

  Is this server Windows 2008 R2 SP1 a controller domain or already running ADAM?  This may be the cause of this message.

  Good luck!

• I have a set of software for Windows Server 2008 with SP1 32-bit?

  My office is running: Windows Server 2008 with Service Pack 1 32-bit.

  AMD Athlon II 640 (Quad Core) 3.2 Ghz

  Installed memory: 3 GB RAM DDR2

  1 Gb integrated graphics.

  NOW!.

  My motherboard: DKA 790GX Platinum. Micro Star International.

  My hardware and everything would be compatible for the server operating system?

  audio device: installed

  Install: network (LAN) Interface Card,.

  Wireless NOTHING: installed.

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.

  
  Thank you & good luck.