Impossible to use the magic wand on hidden forms

Similar Questions

• Improvement of a line by using the magic wand

  We use Photoshop a lot, so this may be a simple question, but I was unable to get something to happen.

  I have a transparent GIF file, which presents a series of counties in my State.  This is just a glimpse of the thin black line of these.  That's all that's on this GIF, though this file is merged into another file that is a topographic map.

  I need to make the outlines of the County in a thicker line so that they will stand out more.  I am able to grasp the lines by using the magic wand (which seems the natural thing to do), but from there I can not understand how to increase the width of the line.

  It is an older version of Photoshop, we had for years, so I need this work accordingly.

  Thanks for any help you can offer.

  Ed

  No need for a selectionm, use the filter-> other-> Minimum to increase the thickness of your black lines. If you want to go the wand then road once you have your selection, use Select-> change-> Expand.

• How to use the magic wand to select in the active artboard only - CS5

  I ran into a problem that I think already has a solution. I have a layout with 7 work plans, each a variation on a design logo. I want to choose a specific color, but only in the active work plan. The wand seems to be the right choice, but I see no way to specify this. All the efforts that I do, the color is selected in each work plan there. I know that select all can limit its scope to the active artboard by adding the option to the command key, but see no equivalent for the magic wand. Did I miss something or Illustrator lack the ability?

  Use blocking or hide to make a selection.

  1. Draw a box around the elements on an artbaord
  2. Select > Inverse
  3. Object > Lock
  4. (use your magic wand and that your changes)
  5. Object unlock everything

• Issue using the Magic Wand selection tool in Photoshop CS6

  I m following a tutorial to learn the basics of photoshop and I m stuck on the magic wand tool, while doing a very simple task. I'm trying to select the white background of the image and then pressing on delete to remove it and make duck yellow transparent image.

  But when I press the button remove key a window opens and the eyedropper tool is selected. And when I press DELETE, while the background is filled with the yellow color of the duck. Please look at the picture and let me know how I can fix this.

  And when I press on enter, this is what happens:

  

  This happens because you are working on the background layer which is special in Photoshop. What you need to do, is make a regular layer by double clicking with the ALT key or double clicking and pressing ok. Incidentally that's going to happen with any selection tool not only the magic wand. Hope that helps

  Terri

• Am using the magic wand. I need to cut more close to the object.

  What is the method of adjustment of length of pixel art?

  Try to adjust the tolerance.

• "WARNING: no pixel selected" with the magic wand

  Details:

  Product: Adobe Photoshop CS5 64-bit

  OS: Windows 7 64-bit

  I'm working on the application of a coating that is textured to a field of hexagons, but not for their "Grout", i.e. the border thickness between each hexagonal "mosaic". I made a selection of the "Grout" and then reversed so that now my hexes were selected, make a new layer filled with black, and then using the magic wand tool, I deselected about 2/3 of the selections in Allen. Apply noise, motion blur, makes a fine metal grain. Invert the selection, remove the excess black, then reverse and save the selection. Define as overlay, super good. Then layer, load my selection of the Hexagon, 1/3 of the responsible for the selection of France that I've done before (so I do not apply two textures on any of a hexagon) and I get about 2/3 of the hexagons selected. New layer, fill it with black, just like the last time. Except that... when I use my magic wand to deselect, I get ' WARNING: No. Pixels were selected "and I lose the entire selection. Can I deselect using square or the quick selector, but not the magic wand. Now I well recorded and could recreate so no real work is lost, but it is easier deselect each Hexagon bit (there a LOT of them) with the magic wand of monstroustly. Why this suddenly is upward?

  Thank you for your time,

  Charles DiGiovanna

  How is the box to sample all layers [] at the top of the main window of Photoshop?

  If it is not checked, the wand will only use the data on the layer that is currently selected.

  -Christmas

• Mask and the magic wand in the Select

  In Using Photoshop / select and mask Workspace for 2015.5 CC, it is said after the launch of Select and mask workspace allowing, "a selection tool such as the Lasso, magic wand, or quick selection. Now click on select and mask in the Options bar. "But when I run S & M, the magic wand is not available. Is it possible to add it?

  Martin

  If you mean the magic wand tool, no. There is only the regular lasso tool and the quick selection in the selection and the mask tool.

• Can you after you have selected a picture with the magic wand just delete the background, leaving only the photo?

  Can you after you have selected a picture with the magic wand, just delete the background, leaving only the photo?

  Or should we use layers to achieve?

  I use Adobe Elements 8.

  Thank you

  Martin

  What is your intention to delete the background - replace the white background transparency or others?

  Keep in mind that if you delete on the background layer (the default name), deletion is replaced by the current color set in the chip of background color as shown in the toolbar. By default, it is white, so if you are selection and deletion of a white background you will end up with white again. If you want that transparency first change the background to a normal layer Layer renaming.

• where is the magic wand tool

  Hi guys

  All new to photoshop. I use photoshop cc and I can't find the magic wand tool, I spent my selection quick and clicked on the lower corner tool, but it does not appear.  I only get the quick selection tool.  I've seen several threads that show the magic wand tool from the drop-down list, but mine does not.  Ideas please > Heather

  

  It is nested with the Quick Selection tool. Don't just click on the bottom... Click and hold down.

  If it does not appear, right click here and the reset tool

  

• where is the magic wand tool in photoshop 2014

  I am unable to find the magic wand tool in my photoshop

  please me elt knoe where I can find.

  The quick selection tool. Use Shift W for him.

• How to move the selection from the magic wand of 2 pixels tool to take off the edges?

  Hello

  I am trying to make a selection with the magic wand tool and move the edges of the selection by a pixel or two, but the button "refine edge" does not seem to do anything.  I want to cut a pixel on the edge of an image that I cut into another image.  Any help would be great thanks.

  Depending on whether you have selected the image or the background, use Select > modify > expand your selection or select > modify > contract selection

• Tolerance of the magic wand

  I have two pixels

  1 RGB 255,0,0 luminance = 76

  2 RGB luminance = 73 245,0,0

  I need to adjust the value of tolerance of magic wand to 10 to select them both, but I would have thought that 3 or 4 would be correct.

  Could someone tell why the minimum value is 10?

  Thank you

  Thanks JJMack

  I think that the color should be there somewhere else that the magic wand tool does not work and I don't think that this is the case at all.

  Most of the articles I've read just state the level of luminance and a particular meaning which is how Ps works (for the most part) then why change for the magic wand tool? It makes no sense (to me at least). Also if you use a tolerance of 255 then you select all. Given that is the case, while he works on luminance levels is not it?

  It would be extremely useful if someone from Adobe could help out here.

  Thank you

• How does one select type or drag a window using the magic trackpad?

  How does one select type or drag a finder window by using the magic trackpad? I can't find the finger combinations to do either. Thanks in advance

  Do you use the old Apple Magic Trackpad or the new Apple Magic Trackpad 2?

  The Trackpad 2 is only compatible with OS X 10.11 El Capitan and NOT earlier versions of Mac OS X.

  Use on your Mac - Apple Support multi-touch gestures

• Impossible to use the box of favorites - a pop up appears saying unavailable location

  original title: IMPOSSIBLE to USE THE FAVORITES BOX-APOP-UP to POSTER SAYING LOCATION NOT AVAILABLE

  Whenever I try to use the box of Favorites (top-right), I can use the tabs 'RSS' and 'History', but not the "Favorites". Instead, I get a message saying: 'not available place '. Can someone out there help, please.

  Edward Baker

  Hello

  I suggest try to reset Internet Explorer and check to see if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings

  It will be useful.

• Could not find that the magic wand took in Photoshop CC2015 after update.

  The magic wand tool has been eliminated in 2015 CC Photoshop? He has been under the quick selection tool. But I see no more.

  Hi ScottRKline,

  No, it has not been eliminated.

  Magic Wand tool is still there.

  He might be invoking the option toolbar edition.

  Go to the Edit menu > toolbar > restore default values and then check out.

  Kind regards

  Claes