Impression of light successive pages

Similar Questions

• 6500 wireless Printer-e709n impression extremely light; can not read the documents.

  Impression of lightness; can not read the documents.

  Hello

  You might want to try some of the troubleshooting steps in this document to print quality for your 6500.

  Print quality troubleshooting

  I would follow the document in the order as it is written to solve the most commone first resolutions

• DeskJet 3915 leaves the impression, flashing light, offline

  I am a newbie to computing > I checked to make sure that the ink from the printer is properly installed, that the paper is not blocked and that it is plugged into the computer and the power outlet... I feel this afternoon and 2 of 6 pages have been blurred, then he refused to print, said that it is in offline mode and the indicator light flashes. It is plugged into a usb port and I am running XP. Any ideas?

  Your welcome... I hope this would fix without having to replace the printer.

• Impression of light (all of a sudden)

  Hi and thanks in advance,

  I have a small (2 computers 1 wireless) where printing network works well between 2 machines but one (in the last 2 weeks)... weak draws almost invisible... but you can bairely see the words and you will hear the printhead traveling across the page.  I went to the HP website and downloaded the driver, ran the facility, but without success... same question.  When I do an alignment of printhead of the printer it prints well and a Test Page print just print the Windows Logo, and as I said everything prints between the 2 other machines.  And once again... This comes from start... something has changed, it seems, but I don't know where to look.

  Help, please

  Warren

  It is indeed possible that ink does not work at all and always have a computer seem to print black very well, according to the print settings.  In some cases, the color inks will be used to make black.

  I would say that the troubleshooting steps described in the paper here.  Solution 4 print a test page for the printer without any influence of the drivers.  This page prints correctly?  My guess is that black will be low or absent.  In any case, please do run diagnostics it and communicate your results.

• MFP m276nw thickness of the stripes on the side the impression, very light, reverse banding.

  A printer that I produced a thick band on the printed side and a very weak banding on the reverse. I changed all the toners. Any ideas before I jump...

  

  

  

  Sorted. The problem was due to 2 bad cartridges. I was wrong due to replace one by one the toners. It was a double fault or stray cartridges producing the same effect. Solved by replacing all the toners simultaneously then presenting one of the elders put one at a time until the fault has reappeared.

• 2550n deaf then progressively less colored on the document of several pages and now none

  Problem started with the strange new relatively strong noise jerky rhythm while printing. All startup and systematic seems ok. Printed with success of State of supply and free page / test configuration at some point after the printer market but with a document of several pages, page 1A was perfect, lighter 2 page, page 4 and page 3 yellow and go progressively yellow fake only. Now it does not apply any at all what toner and paper appears as white as he went.

  Dark cyan is on (544 pages remianing EST) but no other warnings or lights newspaper correspondents.

  No idea how I confirm definitively what who is at fault? I have a service manual and am happy to tackle the problem, but with no printer engineering background would not know what was defective or not!

  Hi David

  No, the printer came not on loan.

  Engines operated but nothing changed.

  But wait...

  I used furry side (not spicy) velcro glued with glue to the impact. I chose this side because when I put a level on a sample of both, the soft side of fur was very slightly more thin.

  Put all back together and it works! Drum rotates smoothly, the warm-up is completed, ready light turns on and the pages of the file config/status and the real impression.

  The only differences are:

  1 / use velcro as opposed to slot the Chair or the foam cushion. The differences in thicknesses were low)<1mm) but="" may="" have="" been="" critical.="" my="" original="" worn="" pad="" seemed="" ok="" but="" was="" very="" thin=""><1mm and="" the="" first="" felt="" i="" tried="" was="" thicker.="" the="" foam="" was="" between="" the="" two="" but="" as,="" i="" said,="" even="" lifting="" the="" 'l'="" arm="" with="" a="" screwdriver="" failed="" to="" permit="" a="" free="" complete="" rotation="" without="" snagging="" when="" each="" toner="" passed="" the="">

  2 / when the solenoid is re-fixed, even if it has a hole and not a slot, which implies a position fixed, there is a small movement and so I shook at the limit of the upward movement in the hole so that the arm had a tiny less distance to be pulled up by the solenoid to release the carousel.

  3 / I cleaned up all the excess toner everywhere.

  I am indebted to you for your guidance, patience and the solution.

  I lost 100 + pages of each toner but the problem is solved.

• Reference Dell 3100 cn - prints light down left side

  Had problems with my 3100 cn laser printer impression of light on the left side of each page, so I bought a new drum thinking that was the problem, but it did not work. I use Dell toner and toner levels are fine, so I wonder why the print quality is poor? Ideas please!

  Thank you

  Paul

  paulchapman31,

  Try to clean the toner by following the information below.

  A wand of cleaning for cleaning the printer is installed on your printer.
  1. open the front door.

  2. remove the scroll bar that is inside the printer right up to the stop.
  Access window cover slides open.

  3. hold the cleaning rod and push the stem and shoot once to clean the inside of the printer.

  4 move the slide to its original position.
  5. close the front cover

• Why my MacBook Air only recognizes all other pages when I try to print pages?

  I have a MacBook Air. Recently, when I typed a letter page 6 pages and tried to print from files, print, it only showed that I had 3 pages, while in the Pages document, I got 6 pages. The computer would print only 3 pages on 6. I did have this problem in the past, most recently. I don't know what I can do about it. He seems not to recognize that all of the other pages. It is not my printer. That's what the MacBook Air shows when I select Print. Only 3 of the 6 pages, even pages shows all 6 pages.

  Any thoughts on how to solve this problem?

  Be more specific.

  It show 3 successive pages or only odd or even?

  If it is the latter which is a parameter in the dialog box print which may be saved as a preset.

  Peter

• How can I change the background color by default for a Web page where none is specified?

  There are many versions I've customized the background color if none has been given to brown to go with the skin I used then.

  Now, I find with a simple text file is not readable with black against Brown, but I can't find today's version where to put them back to white (or at least a pale color).

  Any help appreciated.

  I think it must be the "Background" parameter in the following dialog box:

  the button Firefox orange (or the Tools menu) > Options > content > button "colors".

  Which leaves you choose something lighter for pages that do not define their own color?

• Printing a blank page

  Whenever I print a document follows a white. How can I fix?

  Thanks for the reply.

  I would like to run the print HP and Dr. Scan to try to dispel the impression of the black page after your document. If you don't have it already, please make a copy of the front of the printer. The blank page follows the copy?

  Try to check for updates on the front panel of the printer, press the Web Services icon in the upper left corner > settings > Product Updates > search for updates of the product now.

• Printer test page printed automatically while turning on the printer

  Original title: printer test page

  Everytime I turn on my printer, it prints a test page. Any reason why this should be the case?

  Hello

  1. What is the brand and model of the printer?

  2 have you made changes on the computer before this problem?

  This is the alignment page that keeps printing. You need to scan the alignment with success page so that it will not keep printing every time that you restart printer.

  The product aligns the print cartridges each time the cartridge installation or replacement to ensure the best quality prints. The continuous alignment page to print when the product is turned on or off, or when a print job is started, for the reasons below.

  -The process of alignment is not complete.

  -The ink cartridges are not correctly installed.

  -The ink cartridges need to be replaced.

  -The product must be repaired.

  If this does not help, do us stop and restart the print spooler service and check whether the problem is resolved.
  Follow the steps below:
  a. click Start, click run, type services.msc and click OK.
  b. scroll down to print spooler.
  c. stop the print spooler service.
  d. restart the spooler service.

• How to stop printing in 1315 HP printer test page all in one

  Original title: HP 1315 all in one printer

  How to stop printing the TEST PAGE, after having changed the ink cartridge?  I get a test page everytime I open my printer

  Hello Suzanne Blouin,.

  This is the alignment page that keeps printing. You need to scan the alignment with success page so that it will not keep printing every time that you restart printer. Click on the link below.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01577355&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN

  The product aligns the print cartridges each time the cartridge installation or replacement to ensure the best quality prints. The continuous alignment page to print when the product is turned on or off, or when a print job is started, for the reasons below.

  -The process of alignment is not complete.

  -The ink cartridges are not correctly installed.

  -The ink cartridges need to be replaced.

  -The product must be repaired.

• OfficejetPro 8600 - unexpected printing on every second page of output image

  HP Officejet Pro 8600 N911g product number: CM750A

  Printer has been in service for about 2 months, use of light (says page counter: 332).  Suddenly, today, every second page output (printed or copied) prints with a superimposed image mask which is actually a page to an external Web site.

  How could an image stored (and ongoing) like this in the device?

  Thanks in advance for any help.

  Sunshyn2005,

  I really enjoy taking the time to present a detailed approach to investigate this matter.  It is reassuring to know that it's really mysterious.

  However, in the meantime, I had taken drastic measures: I have uninstalled and reinstalled the software for printing on all connected computers and the problem is not (so far) reappeared.

  Thanks a lot for sharing your knowledge.

• new cartridge did coincide, but this page prints every time that I start printing, my waste. C3180

  HP Photosmart C3180, I had several years.  Recently installed new black ink 92.  Print alignment cartridge successfully page.  Whenever I turn on the printer to start printing, this page will be printed once again, my waste.  How can I get it to stop?

  I'm happy to help you.

  The black inks and color print ok?

  Ink readings are an estimate and is not accurate.  I think that the reason why the printer continues to try to line up is because of the low color ink.  If you do not need color, you can see if the alignment stop if you remove the color ink cartridge.  They stop?  Is it the black printing ok?

  If alignments are continuing, I recommend to replace the color ink cartridge.

• What strikes made smaller text on the page?

  Separated from this thread.

  I see you have answered the question, if you are using windows 7. I have windows 8 and the shortcut key, that I keep accidentally hitting keeps making the impression on the smaller page.  As I said, I have no idea what I am hitting when it happens, but he drives me crazy.  How can I disable it in windows 8.  I'm sick to death of this windows 8 so far.  It sucks.  And I don't want to stop the pinch and zoom as I use it on my computer laptop touch screen; It's a combination of keys that it deploys to arrive

  Perhaps mean you

  Ctrl + plus sign = increase in the size of the text

  Ctrl + minus sign = reduce the size of the text