Improved administration server
I just installed the software later and taking on my server administration and since (the last 5 hours) all my servers appear as question marks.
I ran all the troubleshooting. They perfectly, without error, however, depending on the device, always with the grey question marks. The SNMP settings are correct on all my servers. The previous version had run very well for some time, no communication problem with network servers.
I can't understand!
Kind regards
Kelly
Tags: Dell Servers
Similar Questions
-
TMS and improved security server TCS
Hey there everyone!
On the Tandberg Web site, there is a page that contains updates for the OS that have been tested for use with the administration server and content server security. However, the last update was 9/2010. Is there a comparable download page here on the Cisco site, with versions I hope more up-to-date? I have looked, but could not find.
Thank you!
I asked one of the ancient engineers TANDBERG, who is now with Cisco, just on this subject, and he indicated that he had used the Windows Update normak, even for the TCS, feature and if there is a problem, he would just roll back this particular update.
I did exactly that with our TMS server and have not had a problem yet.
The second generation servers TCS are not devices and doesn't look anything like first generation servers, so I'll start doing the same thing with the TCS as soon as the remaining 2 were replaced by more recent, industrial research material.
Cisco had a contract to upgrade in place for some time, maybe even the case, that they are eager to get rid of the old boxes of TANDBERG TCS - well, it's the impression that I myself still.
Bravo jens
-
I want to improve my server database Oracle 10 g 10.2.0.4, node 2 CARS on OS: release of Red Hat Enterprise Linux Server 5.3 (Tikanga)-version 2.6.18 kernel - 2.6.18 - 402.el5 to 128.el5. This core does support my current Version of 10.2.0.4 or do I need to apply patches on the binary database after upgrading the kernel?
Thank you
Hameed
Hello
It should work without problem.
According to the following document, you should have the kernel version 2.6.18 - 8 or higher.
Oracle Database (RDBMS) under Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating system Installation and Configuration requirements checklist (8.0.5 to 11.2) (Doc ID 169706.1)
Also check this document:
How to check that you have an Oracle support for the kernel (Doc ID 225710.1)
Kind regards
Bashar
-
Administration server and the servers managed (WebLogic Server).
Hello
What are Server Administration and managed servers , I saw these words as I read the installation guide for WebLogic server,
but I don't know what they are?
I saw them while I was reading on the Node manager that allows me to start the above mentioned.
-J' installs the WebLogic to develop applications with oracle reports and forms services.
1 - do I need a node Manager, Administration Server or managed servers?
2. is the Manager nodes, Server Administration or servers managed as EnterPrise data control manager ?
Thank you very much
Answers to most of your questions WLS lie in WLS documentation:
http://docs.Oracle.com/CD/E23943_01/Web.1111/e13752/TOC.htm
However, a simple answer to your questions could be summed up as follows.
If you are familiar with older versions of application server version 10, which include OC4J as its Java container, as a managed WLS server is basically the same thing. In the context of WLS, a managed server is responsible for hosting java applications on the server side. For example, Oracle Forms Servlet. The WLS management server is actually a java application deployed on a managed server. So, really, the "Admin" server is a kind of "Managed Server". In a typical installation of forms/States, you will find that at least three 3 managed servers are created automatically for you:
- Server Admin
- WLS_FORMS
- WLS_REPORTS
Node Manager is a separate process that is used to allow the two directors of the WLS environment such as command line allowing the administrator of the server to communicate with other servers managed, local or remote.
http://docs.Oracle.com/CD/E25178_01/Web.1111/e13740/overview.htm
Then, for simply "run" apply (forms, for example), all you need is the managed server that hosts the forms Servlet. However, if you want to change the configuration via a web interface, you must also run the administration server (and Node Manager).
All these components are much more complex than what I've described here. I would recommend to consider the documentation if you are interested in learning about them. That said, the best way to really learn about them likely will be to install the product and start using it.
-
Cannot start OIM_server and SOA_server of the weblogic administration server
Hello
I'm stuck with very critical issue, where in I am not able to start the IOM and soa from the weblogic administration console servers. Attach screenshots. Can someone help me to find the problem and fix it. I want to start this servers to the configuration of the Identity Manager Oracle (from the configuration wizard).
Let me know if I need to check all logs and submit them.
Any help is appreciated.
Thanks in advance
The order should be as follows:
1 DB, WLS, UCR...
2. the patches.
3. create the field. Access to db sources should be tested during this phase (Test JDBC schema component in the wizard window).
4. secure database store. In your case:
%MW_HOME%\oracle_common\common\bin\wlst.cmd %MW_HOME%\IDM1\common\tools\configureSecurityStore.py %MW_HOME%\user_projects\domains\oim_dom - IAM Pei
m c d create Environment variable MW_HOME must be set in the command window or in:
System - Advanced Properties - Environmental Variables - Variables system - new - name of the Variable: MW_HOME, the Variable value:
To check:
Start the new command window (old could be closed)
Type set | find "MW_HOME".
MW_HOME = C:\Oracle\Middleware
5 post stor:
%MW_HOME%\oracle_common\common\bin\wlst.cmd %MW_HOME%\IDM1\common\tools\configureSecurityStore.py d %MW_HOME%\user_projects\domains\oim_dom m post
...
Info: Validate the operation completed successfully.
6. start the administration server.
7. start the server of the SOA.
8. set the IAM.
CD %MW_HOME%\IDM1\bin
config.cmd
9 configure nodemanager.
10 departure you servers managed.
11 create
\security\boot.properties file on each server and set the user name and password. -
People,
I downloaded the files required for Essbase and installed with rapid deployment. The installation was successful, and during installation, it is only requested a deployment password.
Now, I'm trying to connect to the server using the Essbase administration console.
That's how I'm doing:
Start > > Oracle EPM System > > Essbase > > Essbase Administration Service > > start the Administration Console Services
This opens the console, however, when I try to provide the following as the connection information:
The admin server: name my PC
Username: admin (when configuring any username as requested)
Password: password deployment
I get a "cannot connect to the Administration Server.
Oracle services seem to work very well in "Services.msc".
I also tried to start services using "C:\Oracle\user_projects\epmsystem1\bin\startEPMServer.bat". I get this message:
Sunday, June 22, 2014
13:09
From EPMServer.properties
Apache Ant version 1.7.1 compiled on June 27, 2008
BuildFile: C:\Oracle\EPMSystem11R1\common\config\11.1.2.0\resources\instance\sta
RT.Xml
Finishing EPMServer.properties
Sunday, June 22, 2014
13:09
I am able to connect to Essbase Studio using this user name and password. However not to the Oracle DB.
Any help would be appreciated. I'm a newbie when it comes to installation.
Kind regards
If it is a rapid deployment and web apps all work on a default port 9000 which means that when you enter the administrator of the server you must enter in the format of servername:9000
See you soon
John
-
Hello
I installed weblogic 12.1.2.0.0 with RHEL5.6. After installation, I tried to set the class path in a file setDomainEnv.sh under base domain directory,
POST_CLASSPATH="/prosun/jasper/jasperreports-3.6.0.jar:/prosun/jasper/commons-digester-1.7.jar:/prosun/jasper/log4j-1.2.15.jar:/prosun/jasper/org.apache.commons.beanutils_1.6.jar:/prosun/jasper/org.apache.commons.collections_3.1.jar:/prosun/jasper/org.apache.commons.logging_1.0.4.jar:/prosun/jasper/iText-2.1.0.jar:/prosun/jasper/groovy-all-1.5.5.jar"
While I'm trying to start the server administrator, the server is not started and special suite is reported in nohup.out file. Please help me solve this problem.
The library above pots are required for our applications.
Could not load Logmanager 'oracle.core.ojdl.logging.ODLLogManager '.
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:366)
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:366)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:308)
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:355)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.security.AccessController.doPrivileged (Native Method)to java.util.logging.LogManager$ 1.run(LogManager.java:186)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.security.AccessController.doPrivileged (Native Method)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
to java.util.logging.LogManager. < clinit > (LogManager.java:176)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:308)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
to java.util.logging.LogManager$ 1.run(LogManager.java:186)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at java.security.AccessController.doPrivileged (Native Method)
to weblogic.kernel.KernelLogManager.access$ 000 (KernelLogManager.java:17)
to java.util.logging.LogManager. < clinit > (LogManager.java:176)
to weblogic.kernel.KernelLogManager$ LoggerMaker. < clinit > (KernelLogManager.java:20)at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)to weblogic.kernel.KernelLogManager.access$ 000 (KernelLogManager.java:17)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)to weblogic.kernel.KernelLogManager$ LoggerMaker. < clinit > (KernelLogManager.java:20)
at java.lang.reflect.Method.invoke(Method.java:601)at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at weblogic.logging.MessageLogger.log(MessageLogger.java:96)at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at weblogic.logging.MessageLogger.log(MessageLogger.java:111)at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at weblogic.security.SecurityLogger.logDisallowingCryptoJDefaultJCEVerification(SecurityLogger.java:13444)
at java.lang.reflect.Method.invoke(Method.java:601)at weblogic.security.utils.SecurityUtils.turnOffCryptoJDefaultJCEVerification(SecurityUtils.java:81)
at weblogic.logging.MessageLogger.log(MessageLogger.java:96)in weblogic. Server.main (Server.java:70) at weblogic.logging.MessageLogger.log(MessageLogger.java:111)
at weblogic.logging.WLMessageLogger.log(WLMessageLogger.java:52)
Could not load Logmanager 'oracle.core.ojdl.logging.ODLLogManager '.
java.lang.ClassNotFoundException: oracle.core.ojdl.logging.ODLLogManager
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:366)
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:355)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:308)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
to java.util.logging.LogManager$ 1.run(LogManager.java:186)
at java.security.AccessController.doPrivileged (Native Method)
to java.util.logging.LogManager. < clinit > (LogManager.java:176)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:483)
at java.util.logging.Logger.getAnonymousLogger(Logger.java:452)
at weblogic.kernel.KernelLogManager.createClientLogger(KernelLogManager.java:44)
to weblogic.kernel.KernelLogManager.access$ 000 (KernelLogManager.java:17)
to weblogic.kernel.KernelLogManager$ LoggerMaker. < clinit > (KernelLogManager.java:20)
at weblogic.kernel.KernelLogManager.getLogger(KernelLogManager.java:26)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
Kind regards
Anand Krishnan
Hello
I did according to your suggestion and cant able to start the administration server.
I tried to post the class path by adding '${POST_CLASSPATH} " as follows and the problem was solved.
Thanks a lot for answering my query.
POST_CLASSPATH="${POST_CLASSPATH}:/oracle/Middleware_1212/jasper/jasperreports-3.6.0.jar:/oracle/Middleware_1212/jasper/commons-digester-1.7.jar:/oracle/Middleware_1212/jasper/log4j-1.2.15.jar:/oracle/Middleware_1212/jasper/org.apache.commons.beanutils_1.6.jar:/oracle/Middleware_1212/jasper/org.apache.commons.collections_3.1.jar:/oracle/Middleware_1212/jasper/org.apache.commons.logging_1.0.4.jar:/oracle/Middleware_1212/jasper/iText-2.1.0.jar:/oracle/Middleware_1212/jasper/groovy-all-1.5.5.jar:/oracle/Middleware_1212/jasper/poi-3.2-FINAL-20081019.jar".
Kind regards
Anand Krishnan
-
Creating a domain with the administration server on a remote computer
Hello
I do not understand how to create the following architecture:
physical machine #1: installation of weblogic server = > for the administration server
physical machine #2: installation of weblogic server + OSB = > for the osb server 1
physical machine #3: install the weblogic Server + OSB = > intended to be the server of the osb 2.
If I create my machine field #1 I don't see any options of the OSB in the product list (I tried to copy all the pots in the directory of models of the installation of the OSB on machine #2, but it doesn't seem to work) so I can't create a domain for my server osb.
If I create my #2 machine field, I see all the options of the OSB in the product list and I can create my domain but I can't make a pack / unpack the machine #1 because I have an error message so I don't know how do to transfer my domain name to the #1 the machine and then start the server administration here.
All of the documentation I find examples with adminserver running on the same physical computer as osb 1.
Could someone point me in the right direction?
Thanks a lot for your help
EmilienHello Emilien,.
You must install the same products on 3 servers for this to work.
It also means that you need an additional license for the #1 server, so that may be an expensive route for :-)
What about Peter
-
The administration server is not reachable from the node target via HTTP (S)
Hi all
I tried add Host in Oracle 12 c. I previously added Linux host OS, but I couldn't add OS AIX in 12 c. I did the auto update for Agent of AIX. You can find my OS and DB info on below.
Server Oracle 12 c - OS is SunOS 5.10
Client host Oracle 11.2.0.1.0 - OS is AIX
During the installation, I got this error message "the administration server is not reachable from the node target via HTTP (S). In topology, we do not use any firewall... As I said I've added Linux and SunOS but AIX does not...
How can I solve that?
B.RYou already mentioned the metalink note? Otherwise please see note
EM 12: Agent deployment fails with error "the administration server can be reached from the node target via HTTP (S)" [1393450.1 ID]
Kind regards
http://www.oracleracexpert.com
Remove the grid or the repository targets control agents
http://www.oracleracexpert.com/2010/06/remove-grid-control-agents-or-targets.html
Tablespace transportable export and import on the same Endian platforms
http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html -
Could not connect to the administration server.
Hello... IAM trying to connect to the server of the EAS and Essbase-Essbase administration console server... It's error "Could not connect to the administration server", although all services are running (I kept services such as manual and all the services manually started)...
A few times I can connect to the console and a few times not... anyone know what could be the error... Thanks in advance...Hello
You can see "Services of Administration Hyperion" as a service. It can show "start" State. But again, reboot by right-clicking on it and try to access environmental assessments.
Sandeep Reddy, Enti
HCC
http://hyperionconsultancy.com/ -
Essbase Administration Server problem
Hello
Essbase agent runs in the background. When I start the Services of Administration Server, the message (below) next appears.
Why do we say address already in use? and how to solve? :|
FYI, I'm running version 9.3.1 and have also installed the planning. Operating system is Windows 2003 Server, Oracle 10 g under the RDBMS
#########################################################################
March 3, 2009 13:57:38 org.apache.coyote.http11.Http11Protocol init
SEVERE: End Point initialization error
exception java.net.BindException: address already in use: JVM_Bind:10080
at org.apache.tomcat.util.net.PoolTcpEndpoint.initEndpoint (PoolTcpEndpoi
NT. Java:264)
at org.apache.coyote.http11.Http11Protocol.init(Http11Protocol.java:137)
to org.apache.coyote.tomcat5.CoyoteConnector.initialize (connector.
Java: 1429)
at org.apache.catalina.core.StandardService.initialize (StandardService.j
AVA: 609)
at org.apache.catalina.core.StandardServer.initialize (StandardServer.jav
one: 2384)
at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
at java.lang.reflect.Method.invoke (unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
at org.apache.catalina.startup.Bootstrap.main (Bootstrap.java:424)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
at java.lang.reflect.Method.invoke (unknown Source)
at com.zerog.lax.LAX.launch (unknown Source)
at com.zerog.lax.LAX.main (unknown Source)
Charge of org.apache.catalina.startup.Catalina March 3, 2009 13:57:38
BASS: Catalina.start
LifecycleException: Protocol Manager initialization failed: java.net.BindExcept
ion: address already in use: JVM_Bind:10080
to org.apache.coyote.tomcat5.CoyoteConnector.initialize (connector.
Java: 1431)
at org.apache.catalina.core.StandardService.initialize (StandardService.j
AVA: 609)
at org.apache.catalina.core.StandardServer.initialize (StandardServer.jav
one: 2384)
at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
at java.lang.reflect.Method.invoke (unknown Source)
at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
at org.apache.catalina.startup.Bootstrap.main (Bootstrap.java:424)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
at java.lang.reflect.Method.invoke (unknown Source)
at com.zerog.lax.LAX.launch (unknown Source)
at com.zerog.lax.LAX.main (unknown Source)
Charge of org.apache.catalina.startup.Catalina March 3, 2009 13:57:38
INFO: Initializing processed in ms 771
March 3, 2009 13:57:38 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
March 3, 2009 13:57:38 org.apache.catalina.core.StandardEngine start
INFO: Starting the Servlet engine: Apache Tomcat/5.0.28
March 3, 2009 13:57:38 org.apache.catalina.core.StandardHost start
INFO: Disabled XML Validation
March 3, 2009 13:57:38 org.apache.catalina.core.StandardHost getDeployer
INFO: Create deployer of host for direct deployment (non - jmx)
March 3, 2009 13:57:38 org.apache.catalina.startup.HostConfig deployWARs
INFO: Web deployment application archive eas.war
March 3, 2009 13:57:38 org.apache.catalina.core.StandardHostDeployer install
INFO: Installation of web application to the context path to jar URL /eas: file: D:\Hyper
ion\AnalyticAdministrationServices\deployments\Tomcat\5.0.28\webapps\eas. War!
Published by: user639316 on March 3, 2009 14:08Hello
You should not need to increase whatever it is, the error is because it cannot communicate with Shared Services.
Are you sure that you can connect to shared services?EAS must be able to access:-http://
: 58080, interoperability, framework, getCSSConfigFile See you soon
John
http://John-Goodwin.blogspot.com/ -
Reset the password of administrator Server 2003
How can I reset a 2003 server administrator password
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/categories/
-
Impossible to establish connectivity with the administration Server JMX
Hello
My environment is less than
WebLogic Server 10.0 MP2
Java version 1.6.0_24
Question:
When you try to connect to the server using WLST administrator I get the below error
Error:
WLS: / offline > connect('system','J1um2Prp','t3://xxxxxxxx:30991')
T3 connection: / / xxxxxxxxxxx:30991 with username system...
Traceback (innermost last):
Folder "system <>", line 1, in?
File '< iostream >", line 22, in connect
WLSTException: Error occurred when executing connect: error getting the initial context. There is no server running at t3: / / xxxxxxxxxxxxx:30991 use dumpStack() to view the full stacktrace
WLS: / offline > dumpStack()
This Exception occurred at Fri Apr 18 09:47:26 CDT 2014.
javax.naming.CommunicationException [root exception is java.rmi.UnmarshalException: error demarshalling arguments; nested exception is:]
[java.io.StreamCorruptedException: invalid code type: B5]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:74)
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:32)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:773)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:673)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:466)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
to javax.naming.InitialContext. < init > (InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:498)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:551)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:303)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:201)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:121)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
at org.python.core.PyMethod.__call__(PyMethod.java:96)
at org.python.core.PyObject.__call__(PyObject.java:248)
at org.python.core.PyObject.invoke(PyObject.java:2016)
to $1 org.python.pycode._pyx6.connect (< iostream >: 16)
to org.python.pycode._pyx6.call_function (< iostream >)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyTableCode.call(PyTableCode.java:404)
at org.python.core.PyTableCode.call(PyTableCode.java:287)
at org.python.core.PyFunction.__call__(PyFunction.java:179)
to org.python.pycode._pyx19.f$ 0 (< console >: 1).
to org.python.pycode._pyx19.call_function (< console >)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyCode.call(PyCode.java:14)
at org.python.core.Py.runCode(Py.java:1135)
at org.python.core.Py.exec(Py.java:1157)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:148)
at org.python.util.InteractiveInterpreter.runcode(InteractiveInterpreter.java:89)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:70)
at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:44)
at weblogic.management.scripting.WLST.main(WLST.java:157)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
in weblogic. WLST.main (WLST.java:29)
Caused by: java.rmi.UnmarshalException: error demarshalling arguments; nested exception is:
java.io.StreamCorruptedException: invalid code type: B5
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:222)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:224)
at weblogic.common.internal.RMIBootServiceImpl_1002_WLStub.authenticate (unknown Source)
to weblogic.security.acl.internal.Security$ 1.run(Security.java:185)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs (unknown Source)
at weblogic.security.acl.internal.Security.authenticate(Security.java:181)
at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRemotely(WLInitialContextFactoryDelegate.java:734)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:667)
... more than 45
Caused by: java.io.StreamCorruptedException: invalid code type: B5
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1355)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:350)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:195)
at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:565)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:191)
at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke (unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:591)
to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:482)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs (unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:478)
to weblogic.rmi.internal.BasicServerRef.access$ 300 (BasicServerRef.java:62)
to weblogic.rmi.internal.BasicServerRef$ BasicExecuteRequest.run (BasicServerRef.java:1040)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
javax.naming.CommunicationException [root exception is java.rmi.UnmarshalException: error demarshalling arguments; nested exception is:]
[java.io.StreamCorruptedException: invalid code type: B5]
Any help will be appreciated
Thank you
Thrilochana
Same problem discussed in the following Note of Oracle:
WLSTException: Error occurred when executing connect (Doc ID 1372757.1) CAUSE
JDK 6.0 was used to run WLST that connected to an instance of WebLogic Server 10 running on JDK 5.0.
In JDK 5.0, by default, - Dsun.lang.ClassLoader.allowArraySyntax is set to false, so that in the JDK 6.0 - default Dsun.lang.ClassLoader.allowArraySyntax is set to true. Because of the incompatibility, a mistake of demarshalling of steam that's happened.
SOLUTION
To implement the solution, please run one of the following steps:
Use the same version of JDK to run WLST than that on which the WLS instance runs.
OR
Ensure that the setting JDK - Dsun.lang.ClassLoader.allowArraySyntax used for WLST matches the parameter even used by the JDK that is running the instance of WLS. For example, set - Dsun.lang.ClassLoader.allowArraySyntax = true when executing WLST to connect to an instance of WLS running JDK 5 If WLST runs with JDK 6.
-Emile Laurent
-
Hi all
I'm trying to deploy an application to the administrator of the server using WLST and I had followed steps below.
(1) I ran setDomainEnv.cmd
It was performed without error.
(2) connect to the Server Admin
Connect ('USERNAME', 'PASSWORD', ' t3: / / localhost:7001', adminServerName = "AdminServer")
(3) to deploy the application
deploy ('benefits', 'C:\Users\suhas\Desktop\benefits.war' target = 'AdminServer')
Traceback (innermost last):
Folder "system <>", line 1, in?
File '< iostream >", line 246, to deploy
File "< iostream >", line of 1848, in raiseWLSTException
WLSTException: Error occurred when executing deploy: target the exception that is thrown when the application deployment: no such file or directory found in the location of the specified application: C:\Users\suhas\Desktoenefits.war : no such file or directory found in the location of the specified application: C:\Users\suhas\Desktoenefits.war
DumpStack() to view the full stacktrace
WLS: serverConfig/test_domain / >
I'm the exception above, I gave the exact war file path while the deploy command of race but represented except the application path refers to a path that does not exist.
I, e. instead of display C:\Users\suhas\Desktop\benefits.war C:\Users\suhas\Desktoenefits.war appear
Please help me solve this problem.
Thank you and best regards,
Suhas
You can use the script here
Automation of the deployment of the application on Oracle Weblogic Server
Use a backslash instead of the forward slash... and type it instead of copy paste...
-
EAS - error: "connection impossible Administration Server.
Hi all
I am very new to EMP
I installed EMP 11.1.2.2 with web application deployed to managing server
OS: windows Server2008
database: sql server
When I try to connect to the console of Regional service, it gives me error
Could not connect to Server Administration
any idea?
If it has been deployed to a single managed server on the default port, then you will need to add the server in the Regional service console as servername:9000
See you soon
John
Maybe you are looking for
-
Hi all Looking for a PCIe card compatible thunderbolt 2 thunderbolt drives put in my Mac Pro 2008 Tower. Possible? Recommend? Thank you BB
-
I went to Cont.Panel and set the default home page and then click on the button Firefox then options and under general set default homepage from Firefox to open but Firefox always opens to the Firefox start page. What can I do else?
-
Connection of the inputs and outputs of a VI
Hello I'm relatively new to TestStand but I'm tying a VI with output entry. So I did a sample project and do the following: First VI: Takes two numbers and adds them, and returns the result in an indicator Second VI: Takes a number and square and the
-
I wrote the problem in the title, sorry... I can have corrupted a file. In any case, can I go back in my computer. I had done a backup disk, but I marked with a question mark. I don't think I did it properly. Windows xp always throws no disc.
-
Access the list of Windows Mail contacts
Hi, I have recently upgraded from Windows XP to Vista and I have previously used Outlook Express 6. I know that Vista doesn't apply to Outlook, but in Outlook, I have my contacts list on the left side of the screen. I can't find out how to get the li