Improvement/Bug? -Email always starts in the "Inbox all the»

Similar Questions

• Dynamic flow always starting from the flow lowest?

  Hello

  I guess that's something small that I'm missing, but it's just driving me crazy

  If I start reading a dynamic flow (Akamai) the player always starts with the lowest quality, and then switch to the top after awhile. However, in reader akamai for example, the stream begins immediately with a high quality and can still adjust the quality if necessary.

  So what is the right way to define a right of acceptable quality from the beginning?

  I use just the SMIL plugin, without the Akamai plugin. Is it worth to use it as well to optimize this question?

  Thank you for your time!

  Hello

  Here is a description of the workflow that we used to make the player start with the initial index more high (according to the measured bandwidth) in StrobeMediaPlayer.

  1. at the outset, we disable the automatic switching (otherwise you cannot change the starting manually index):

  addEventListener (MediaPlayerCapabilityChangeEvent.IS_DYNAMIC_STREAM_CHANGE, onIsDynamicStreamChange);

  private void onIsDynamicStreamChange(event:Event):void

  {

  If (isDynamicStream)

  {

  this.autoDynamicStreamSwitch = false;

  }

  }

  2. in our NetLoader override us the createNetStreamSwitchManager method and the whole of the initial index based on the badwidth measures that we stored in LSO:

  override the createNetStreamSwitchManager(connection:NetConnection,_netStream:NetStream,_dsResource:DynamicStreamingResource):NetStreamSwitchManagerBase function

  {

  ...

  dsResource.initialIndex = initialIndex;

  ...

  }

  3. at the end of the day, we have automatic switch to true:

  addEventListener (MediaPlayerStateChangeEvent.MEDIA_PLAYER_STATE_CHANGE, onMediaPlayerStateChange);

  private void onMediaPlayerStateChange(event:MediaPlayerStateChangeEvent):void

  {

  If (event.state is MediaPlayerState.PLAYING)

  {

  If (isDynamicStream & autoDynamicStreamSwitch! = autoSwitchQuality)

  {

  autoDynamicStreamSwitch = autoSwitchQuality;

  }

  }

  }

  To do this in a plugin, you will need to use the DynamicStreamTrait (you can set the autoSwitch to true/false to your plugin.

  Here are some links that I hope will be useful for you:

  1 see the StrobeMediaPlayback in action here:

  http://OSMF.org/smptest/debug.html?plugin_smil=SMILPlugin.swf&src=http://mediapm.edgesuite.NET/osmf/content/test/SMIL/elephants_dream.SMIL

  (respect the lsoDownloadKbps which is your bandwidth that store us in a local SharedObject and observe the news of dynamic flow. The first time you load the page that your player will start with index 0. Later he should start the player with the most appropriate index for you.)

  2 take a look at our implementation

  https://sourceforge.NET/Adobe/SMP/SVN/latest/tree/trunk/player/StrobeMediaPlayback/src/org /osmf/player/media/StrobeMediaPlayer.as

  https://sourceforge.NET/Adobe/SMP/SVN/latest/tree/trunk/player/StrobeMediaPlayback/src/org/osmf/net /.

  Hope this helps,

  ANDRIAN

• Windows Media Player 11 always starts playing the first piece of the library. How can I change this so the first song it plays is random or last played song.

  When I open Windows Media Player 11 the first song it plays is always the first song in my library.  I can't find the setting to change that to a song randomly or at the last song played before him close last time.

  You can try the function 'Restore media to start' of the Windows Media Player Plus! plugin.

• FireFox always starts in the FireFox start page no matter what I do

  I went through all the forums I find and tried everything suggested, but I still can't get FireFox to open to about: blank. I went through the subject: config and changed the start page repeatedly in the Options section and deleted a user.js file, but it's a no-go. Whenever I start FF I get the FF start page. Spybot and MalwareBytes didn't report any problems. I am at a total loss, why this is happening.

  https://support.Mozilla.org/en-us/KB/how-to-fix-preferences-wont-save
  Note: Some software, like Advanced SystemCare with surf Protection, can protect the files in the folder of Firefox profile against the changes. If you have this software, then check the settings or uninstall this software.

  Favorite and use this.
  Download the Mozilla search reset {web link}
  This module is very simple: when installing, it backs up
  and then resets your search and home page preferences
  at their default values and then to uninstall. This
  affects the search bar, search bar URL, and the home page.

• After effects CC doesn't always start on the Mavericks

  This seems to be a common problem but mine is a little different

  Probably because of my lack of experience of mac or Adobe products!

  OK, my problem started from a window pops up saying "Install CUDA 5.0 or later and restart the computer" or something like that when I opened first after effects CC.

  So I googled and found the NVIDIA site and downloaded the 5.0 CUDA, Yes, I've changed my preference of security on mac to allow applications to download from unidentified developers and then completed the installation, easy! ... I thought.

  After the computer restarts I have re-opened AE, it loads a bit with this fancy purple intro 3D picture, but this time he opened with nothing but the "*" noise (noise of the error?).

  Everything I see is gray frames with the tab 'Render tail'... no welcome no screen, no tools, no screen «Install CUDA»... "either.

  The buttons on the top (file, editing, Composition, layer etc.) are clickable, but the content of each button is grey apart from the 'help '.

  I tried the update, uninstall and reinstall of AE, stopping and restarting the computer, but no luck.

  Is that what someone has / had the same problem? I don't know what to do next

  I apologize for the long history and would be much appreciated if someone could help me

  What you can see in this screenshot, it's all I have lol.

  

  My mac of OS X 10.9.2 and tries to use AE CC passing

  First: You seem to have started the rendering engine After Effects, not the main After Effects application. Try to start the application After main Effects, not the application of rendering engine.

  Second: You seem to have misunderstood the message on CUDA. This message just means that one feature (which is obsolete) depends on specific software and hardware - a specific type of GPU Nvidia and CUDA.

  What GPU do you have? If you have installed CUDA on a non - Nvidia GPU, it can cause serious problems.

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• Why can't I add a text box and type from the top of the box down. It always starts in the Middle

  I created forms and need a large text box for people to enter information over there. It allows me to draw a text box, but when I got to type enter you in the text box in the Middle instead of the top of the text box.

  You must define a multiline field.

  Tuesday, October 20, 2015-17:56, hollyh3271626 [email protected]>

• the music starts with the 1st song in the song list when you plug a headset or cable to the

  My iPod touch 6th generation always starts with the 1st song in the song list whenever I plug a headset or cable to the.  How can I stop this?

  I think that when you plug the headphones into your iPod, it begins to automatically play the first song because your music application is still open. You can stop it by opening the music app and pausing again. Or just press pause on the screen of reading here and close the application.

• In Windows Media Player 11 when spend to add songs, how get the list to stop starting at the top?

  With WMP11, when adding pieces of the current reading library, I often change between two tabs. My question is every time I switch back to the library to add more songs, tab how can I get the list to stop starting at the top? I have a number of songs scrolling on there where I left last can be very inconvenient. I remember with an older version when you leave the library, that he would stay where you left it. Yet once, how can I stop the library always start at the top and instead pick up where I left off?

  Thank you very much

  Reinstalling wmp11

• XP does not start at the logon screen

  Original title: XP will not boot:

  When I try to start Windows XP, the computer stops responding it hangsup lack of a better word with a black blank screen immediately after that the windows logo splash screen is complete.

  Usually after the logo splash screen the winlogon.exe resumed and should begin to the local security authority (Lsass.exe).  At this point the "welcome / login screen should appear.»

  I've tried safe mode and the computer hangs at some wile loading point drivers.  I tried last known good configuration and the computer crashes just straight up.

  I don't think that it is material, because I can use a floppy boot Lennex and material seems fine in mode lennex.  I can start the recovery console and I used several commands, but I was not able to find an error and or fix the problem.  Has anyone seen or heard talk about this before?

  I don't think that it is material, because I can use a floppy boot Lennex and material seems fine in mode lennex.  I can start the recovery console and I used several commands, but I was not able to find an error and or fix the problem.  Has anyone seen or heard talk about this before?

  First of all, Linux is not dependent on any of the installed equipment. Specifically, the hard drive. So, you could always start from the disc even if you had a failing hard drive.

  Secondly, what commands do you use in the recovery console? The commands below are what you should use.

  Chkdsk /r > Enter

  Fixboot > Enter

  FIXMBR > Enter

  If after running these commands the computer still does not start in Windows, you should probably test the hard drive.

• Why it starts at the beginning?

  In older versions of Windows Media Player - the system picked up where the last/story/cd/whatever song arrested and the next time I opened the player is where he would have started playing.  In more recent versions of Windows Media Player (that I currently use c. 11), it always starts at the beginning of the very first so I need to find where it ended last time, and restart from there.  I would like to be able to pick up from where it left off - how this can be reset to the to do?

  WMP is not a built-in feature to restore the last playback position. However, the Windows Media Player Plus! plug-in adds such a feature in WMP, then I suggest that you try it.

  (The plugin official site is down for maintenance at the moment, but you can still download the http://download.cnet.com/Windows-Media-Player-Plus/3000-2169_4-11445552.html plug-in.)

  Tim Baets
  http://www.BM-productions.TK

• In the DC series models starting from the IDE hard disk?

  In addition to above question - are you able to use sata cd rom on machines that have the ide and sata connectors and boot from the drive hard ide?

  Thanks in advance

  cpu201

  Hello:

  The last model that came standard with a HDD IDE was the d530. From the dc7100, primary hard drives are SATA, and starting with the dc7800 is not an IDE connector on the motherboard at all.

  You may be able to boot from an IDE hard drive in a dc7700 and earlier versions, but you will need to remove the optical drive to the primary IDE cable position and place it in a secondary position, and that's if you can get the cable to fit. Otherwise, a SATA optical drive must be connected to the SATA 2 port.

  The d530 starts natively on the IDE HDD and you can add a SATA optical drive to the sata port 1 and always start from the HARD disk.

  Paul

• How to position text in a text field so that it starts in the upper left corner, rather than in the Middle?

  Once more, I'm working on another form for the boss.  It is a form of assessment where you make a section for comments.  I know how to select the text field so it will allow several lines, but I can't find a way that allows me to set the starting point of the text in the upper left corner of the text box and then sink.  It always starts in the Center.  If I do the text box too small as an up/down arrow icon is displayed and the user must drag the arrows up or down to read the comments and is not the effect I want to create.

  Thank you.

  M Campbell

  With the field of selected text, switch to the view of paragraph. You can switch between ' change the caption and value ","Change Caption"and"Change value"by clicking on the chevron. Select alignment for the caption and the value.

  

  Steve

• Project does not always start on slide #1?

  I created a project using Captivate 4. I published as a swf file.  When I first opened the swf file, it starts at the beginning on slide 1.  If I then close file swf in the Middle another screen and then re-open it, it starts again at the screen where I closed it.  Is there a preference or something that I can put then it always starts on the 1st screen, at the beginning?

  TIA,

  Adriana

  Hello Adriana.  I think what you see is the function of self-study to the rhythm of the Table of contents.  Open your table of contents (project > Table of contents), then make sure that you are on the table of Contents tab, and then click the settings button.  See if the Auto checkbox in the learning pace is selected.  Uncheck if it is.

  Hope this helps.

  Mister C.

• From 8/24, most of my emails go directly in the trash instead of the 'Inbox '. I have some companies, like the Daily Herald, etc. that I want to receive.

  I don't know if it was the result of an update to Thunderbird if this problem started when I created a filter for unsolicited junk e-mail that I had received. When I clicked "Run", each email "in box" went in the trash, instead of just the item that I had highlighted. I then highlighted all of the trash and he returned to the Inbox. None of the items I've retrieved from the trash and you want to receive were among the 685 items listed in my filter of junk e-mail messages. I have no idea how all of these got messages filtered as trash. I had hoped the problem has been resolved, but as the day wore on, I noticed that almost every email I received still went straight to the trash.

  Examples of emails I love receiving: Daily Herald updates, Netflix, global market, Best Buy, etc. I don't have to demand for payments of invoices from the 8/24, but I have to assume automatic responses to planning a payment will also go to the trash. Even the Mozilla Support e-mail that was sent just when signing into my account went straight to the trash. There are several emails I want to keep to my file, so I don't want to close my account and start again. It seems personal friends messages are still in the 'box', but each business email goes directly to the trash if desired or not. The screening went to the extreme.

  The help section does not resolve this issue, so I am at a loss on how to solve this problem. It doesn't seem to be a process to do the opposite of message filtering. In the dream world, I would need to highlight the messages I want to receive.

  An overview of this issue would be most appreciated.

  Problem solved. I used Google search for my problem and found some very good information on troubleshooting. The last filter, I created for spam, I clicked on 'does not contain' rather than 'contains' and therefore each email message unique since that time obviously did not contain these key words, as they were going into the trash, I received!

  What a relief to retrieve new messages in the box in. Thanks Google and those who offered assistance to someone in the past.