In a number of network Mac WAP4400N
I bought a WAP4400N to extend the reach of my Mac network while putting in place a second AP connected to the router.
I have configured the WAP using the utility as follows:
- assigned to the same SSID (lowercase) Time Capsule
- downloaded and installed the latest firmware (1.2.17)
- assigned a static IP address in the range of router (I think... WAP to 192.168.1.199 - router is 192.168.1.1)
- Select the type of network ot 'N-only.
- chose the same option of security (WPA2 Personal) as the TC with the same password
- Broadcast of the SSID 'Yes' to the value
- choose another channel than the time Capsule (11 CF, WAP on 6)
- saved all changes and restarted the WAP.
When I unplug the cable of the iMac, I used to set up and power cycle it is impossible to access the configuration utility, accessing the 192.168.1.199 waiting times; also, when I run IP Scanner WAP does not show at all, well it seems that I now have coverage where I didn't before (BTW, no way to verify that for sure?)
Comments welcome
I solved this problem.
There is nothing wrong with the WAp4400N, but I got a DHCP range limited to the first 6 addresses in the range of 192.168.1.xxx (I assumed it was my ISP try to configure the router for 'domestic' use)
Once I corrected everything was fine - read the article published here
Tags: Linksys Routers
Similar Questions
-
Hello
I have Adobe Creative Suite 6 Design Standard in the Windows Version, how do I get the serial number for a MAC Version?
I downloaded Adobe Creative Suite 6 in my Mac, but it does not accept the serial number.What should I do?
Thanks for any help.
Best regards
Digga515Product change or the language platform - they might still be offering this for CS6, although it gets old...
You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm
You can exchange only once and lose the Windows license, when you switch to the Mac
-
groups of ports (number of network cards)
I understand that a virtual machine vMotion between esx hosts network configurations must match (port groups/virtual switches).
I would like to know as long as port groups and virtual switches correspond between the guests, whatever the number of network cards is assigned to a virtual switch for vMotion work?
Example:
ESX host: Host1 - vSwitch2 with groups A, B - a vmnic2, vmnic3
ESX host: Host2 - vSwitch2 with Group A, B - a vmnic2, vmnic3, vmnic5
VMotion will still work in this scenario. I think that the game groups and port vSwitches, he cares about the number of network interface cards.
Thanks in advance!
You are right. It does not matter if you don't have the same number of physical adapter assigned to a vSwitch for vMotion to work.
VCP 3, 4
www.vstable.com
-
Trying to count the number of network adapters on the virtual machines
Hi all
Have tried to create a script to simply count the number of network adapters in a virtual machine? In all honesty, don't have a clue where to start? I don't know there are a number of 'ownership' but can't seem to figure out how I can integrate this counting cards network
Thank you very MUCH in advance
Munster
Try this way
$vms = Get-VM foreach ($vm in $vms) { $vm | Select @{N = "VMName"; E = {$vm.name} }, @{N = "VMNICCount"; E = {$vm.Networkadapters.count} } }
Inside of the foreach loop, you select in each $vm name and County NIC.
____________
Blog: LucD notes
Twitter: lucd22
-
The Macbook Aluminium 2008 serial number appears on the surface of the computer? And I would also like to know, is it possible to find the Mac if it is in offline mode? I got the stolen Mac and try to find solutions :/
Thank you in advance.
The serial number is on the back. If you had to 'Find my Mac' before it was stolen then you can go to http://www.icloud.com and goto the page "Find my phone", however, the location will be calculated from nearby wifi networks and will be very rough. the Mac must also be on, not not wiped and able to connect to a network. If you have failed to 'Find my Mac' then it is impossible for the location. All you can do is to report it to the police.
-
How to disable the recognition of phone number on a mac
When I type the 10-digit numbers in calendar events, Notes, and I think other places, they become a link that opens FaceTime, whenever I click on them (for example, to make a correction). None of them are still phone numbers. I have not and do not want to use applications that exhibit this behavior. How can I disable it on my Mac, so no numbers are never treated like phone numbers, unless of course they are entered into a field which is expressly defined as a phone number (for example in Contacts)?
I don't think there is a way to disable this option, although there might be a way through the commands from the Terminal.
To edit the recognized text auto, long - click on the text.
-
Direct networking Mac Pros, and via a switch setting
I have a Mac Pro from previous gen and will migrate to a 2013. I'll keep one older goes for FCP7 concerts that come to life.
So for the migration and the initial period of work the bugs out ("Dang?', where is the After effects plugin "AW, forget a font! "Where this stupid buy code?") I'll need to have network; I also need to buy a bunch of attachments for spinning-disk RAID, SSD, optical drive, etc. There will be a period I will access pictures and things of the old system while working on another.
So my question: the old Pro is connected to a switch and several macs are networked throughout my space. There is an additional port close to my office so I can network the pro - but it it possible/fast/sought somehow to have old mac plugged into the switch and plug the other into the free Ethernet port on the old, because they will be sitting side by side (Yes, my office will be a mess for awhile).
Basically, I was wondering if a direct connection between two Mac will be faster file transfers and allow a new access to the internet.
(I know how to add the new for the network, but still she wondered why there are two ports on Mac high range). Thanks for any thoughts.
for near-Hard Drive performance, you need a Gigabit Ethernet switch. If you do not, you must get a. It's the only acceptable way to manage the transfer of files from local computer.
Your router has no need to gigabit speeds, because your Internet connection is not likely to be faster than 100M bps. The "trick" (if it exists) is that the computer transfers to use Ethernet wiring, but they do not use the routing on the router, only direct data transfer function (switch functions ""), if a cable like that. "
There is no simple way to get faster speeds, like plug it into a computer by cable-computer.
The second Ethernet port is good for storage area network connecting, as a NAS.
-
LaserJet MFP M477fdw Pro: Scanning to network Mac folder
I tried to configure the network path to a shared folder so that I can scan directly onto my Mac. I followed the instructions:
-created a shared folder
-sharing of files for my user name
-compatible with the SMB and AFP file sharing
-Full name-folder path \\192.168.178.20\Scans (scans of record is in my root)
-He gave my username and password
No mather what I try in the path of the folder or the test fails, and I can't scan. What I am doing wrong?
Edit: when you use the Network Setup Wizard on my other PC scanning, I can even see above on my mac. I just can not connect?
After 2 hours frustrating to try I finally found it. My Mac has my first and last name as username and contains a space. Rename my full name for 1 Word has solved the problem.
-
Home network Mac Snow Leopard and Windows 7 PC sees only the other
After much research I found a way to link my new PC with Windows 7 for Mac computers in our network at home. Macs can now see the PC but not vice versa. I don't see a Mac of PC computers. I had to do workaround on the PC to create a new user account to trigger the Macs to see the PC using smb: / / name @ method is if there is a similar solution on the PC?
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Photosmart 7510 will connect is the network (mac) wireless
Although already our Photosmart 7510 used to connect wirelessly to the network, it arrested recently, without a known cause. I've updated all the software. It is said on the printer that is connected to the network and print via usb cable but the computer says that it is not connected (or on any other laptops 3 mac at the office also connected to the network).
As I said, I've tried updating all software and have tried to delete the printer via reset printing system by following the instructions on a previous post. However I now can't add the printer as was then ordered.
The software used is
Mac OS X Lion 10.7.5
Any help would be great, printing via USB is such a pain!
Thank you
Hello
Try unplugging your router to power for 30 seconds, plug it back in and look for any change.
Also, try power cycling the printer.
If it persists, reset the network settings and reconnect it to your network, you can find steps planned in steps 3 and 4 below:
http://support.HP.com/us-en/document/c02948582
So, you can try to reset the printing system and check to see if that can help you:
* Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
Click on the Apple menu and then click on System Preferences.
Select Print & Scan.
Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
Click OK to confirm the reset.
Type your user name and password.
Click OK. The printing system resets.Try to add the printer by clicking on the sign more and check any change.
If none of the steps above does not help, have you changed anything lately? a new router, etc.
-
Windows for wired home network Mac
How to connect a Windows 7 PC to a Snow Lepoard Mac using a cable through a Netgear N600 router network?
Hello
Please contact Microsoft Community.
It seems that you need assistance in networking to Windows 7 and Mac computers.
I suggest you to refer to the articles and check if it helps:
Networking of computers running different versions of Windows
Mac OS X: how to connect to files Windows (SMB) sharing
http://support.Apple.com/kb/HT1568
I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.
-
Hello and happy new year. I need to transfer my license to a new computer. I can't find my serial number. How to do it?
Thank you
If your adobe programs are still installed on your old computer,
-
Do need me a different serial number for a Mac?
I bought the Windows edition, downloaded the Mac edition (I have a Mac), but my serial number will not work. Do need me a different serial number? Should I just return my order?
Hi jessicas
You don't need to buy another license. Contact us please contact customer service to get the product platform traded to Mac.
Concerning
~ Assani
-
File number:0214213994
I was informed that my serial number for CS6 Master Collection was for Mac... I have a PC. The agent did not offer to change the platform for me that I had been informed since by the College that that's what he should have done.
How can I get this done as I rarely am able to access the chat 24 hours option.
Thank you for the Dfkb update. What version of Chrome you use? You have any plug-ins or toolbars installed? I'm trying to understand why individuals are facing difficulties to communicate with our support team. All the details you can provide on the browser that did not work would be appreciated.
-
Serial number on 2 mac.
Hello! My serial number of the CS6 box does not work on my new Mac book pro, because it should be disabled on my iMac... But I need them both! How?
Thank you
Contact technical support by phone or web chat to reset the activations.
Mylenium
Maybe you are looking for
-
From time to time the body of my messages in my Inbox is "scrambled", which means that the messages all resemble http code and cannot be read. And code in one does not necessarily match the message - inside can refer to a different message. It occurs
-
This happens usually a search engine (google) but sometimes go into a web page. Generally pages trying to sell something. It's very boring and tedious. I uninstalled Firefox and reinstalled.
-
wanted to the hHP 5532: print electro-photographique
I just bought a new HP ENVY 5532 printer today. Put in any and everything works fine apart from the printing of photographs, either by a r file directly from an sd card. I've followed all the instructions to try to improve the quality: Perfect ink le
-
I got this copier/fax for years and has always worked very well. A week ago when I went to make a copy... Copier screen said "warm up", but never prints. I tried to unplug and reset, but still not to copy... it continues to print emails from computer
-
Time or time & date are hurt every time I start after its been closed some time -.
Time & date will not be synchronized after full stop then start on time or date & time are not good, sometimes backwards to Dec. 2004