LaserJet MFP M477fdw Pro: Scanning to network Mac folder

Similar Questions

• Color LaserJet MFP M476 Pro: Scan to network folder

  Finally decided to try to set up the scan to a folder again... but run into the same issues as before... invalid name and password

  The printers and mac are on the same wireless network and have no problem printing.

  Using Macbook Pro running El Capitan 10.11.6 - has only one user on mac... Bob

  Not yet completed:

  Folder created under users\Bob\Scan

  Went to the settings and turned on file sharing and add the Scan file to the list of shared folders and make sure "Bob" is listed as a user with read/write privileges.

  Page web accessible to 192.1.168.88 printer

  Selected scan / file Configuration of the network

  inpu the following parameters

  Display name - Scan

  Network path - \\192.168.1.94\Scan (confirmed this ip address is the ip address for the mac)

  User name - Bob

  PW - same as the one used to log for Mac (verified by up to 30 times!)

  Continually get "user name or password is incorrect. Make sure that the user name and password are correct"

  Any suggestions?

  Hello

  As long as you enable sharing of Windows files for the user the pritner will not be able to connect because it only supports SMB.

  By testing, I see the user as available for selection Although SMB is off...

  By searching online, I do not see messages indicating you will not be able to set in Windwos God file for the password iCloud user, may it be linked? :

  https://discussions.Apple.com/thread/6708192?start=0 & tstart = 0

  You can try creating a new user account and set it for this purpose (you won't even need this user to login, just set it to the printer while offering both users access to that folder, then you can continue to use your current users).

  Another thread indicate that change the password solved the problem:

  https://discussions.Apple.com/thread/6629743?start=0 & tstart = 0

  For any other questions, I suggest to start a thread at Apple Support communities, as long as you won't solve this problem, the printer won't be able to connect.

  Please let me know any progress,

  Shlomi

• Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

  I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

  I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

  My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

  Summer spend hours online to find an answer and is now well bored.

  I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

  I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

  Is it possible to scan to a mac at all with this printer? Any help?

  Hi @sa9494,

  I see that you have problems with scanning. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Here is a screenshot of what it should look like. You have the scanning through top tab?

  

  I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  Connect the printer with the USB cable, to see if you have the same results.

  Let me know.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• Color Laserjet MFP M277DW Pro: scan to pdf corrupted

  I use Nitro PDF, and every time that I scan to PDF it is said the first page was damaged and has been repaired.   But it is empty, no content on page 1. This will happen if I use the shipper of record or the screen.  I just bought a new laptop, and there was this problem on my old laptop as well.  Scan to JPEG works but then have to take the extra step to convert the JPEG to PDF and it's a hassle.  Why the first page is always corrupt?

  Hello

  Do you have installled of Adobe Reader on your PC? (even if not used as the default viewer)?

  As you can find the system requirements below, it is part of the configuration required to make full use of the printer:

  http://support.HP.com/us-en/product/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/document/c04515051/

  Try to install it starting from the following link, then try to scan the image:

  http://get.Adobe.com/reader/

  Now try to open the file with Nitro PDF, if the same persists check if you can see a difference with Adobe Reader.

  Shlomi

• LaserJet MFP M477fdw Pro: LaserJet Pro M477fdw MFP - cannot sweep off-grid PC

  Oh please can anyone help? Spent 3 hours on the phone today, a refund 2 with tech, the rest of the post sales and pre-sales who was supposed to be calling me back with a list of printers that can do what I need, but all first does not, so I called again and she promised that she would appeal before s/n and still did not! Massively unproductive day. OK rant over.

  So I bought the above and it does everything I need IF I want to rise to the printer and scanner as a pdf for printing. My old 8600 OfficeJetPro I stood there, chosen analysis, it would be as if scanning to PC / Email. / USB / Fax etc. I would say PC and scanned and sent to my PC folder on dropbox and open the pdf file automatically.

  The LaserJet printer seems no analysis like that, unless it is connected to a network folder, which tech was able to put in place. He wants only to use Windows fax and scan, which is a JPEG - no good for me.

  It may not really be so complicated and I'm sure it's possible. I tried uninstalling etc and all the drivers on the HP site but nothing worked.

  Can someone help me?

  Glenda

  Hi Glenda,

  HP Laserjet printers don't offer direct scanning to a computer like HP inkjet supply, scan to a computer can only be done by HP itself scanning software and not by the front panel of the printer.

  You can find the manual to the user below, any method of scan supported is listed (see Scan page v):

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04636804-2.PDF

  You can go the HP from your PC only software from the Control Panel before you can only scan to a USB Flash drive, a shared network folder, a mail server, two emails or folder scan network are available for network connected device.

  Kind regards

  Shlomi

• LaserJet mfp m125nw pro: scanning multiple pages on laserject pro m125nw mfp

  I want to scan a document of 5 pages in a single file.  I can't find instructions in manual or online to print several pages in a scanned document.

  Hi @Tansie,

  Welcome to the Forums of HP Support!

  I understand that you would like to know how to combine a document of several pages in a single file. I want to help you with this.

  I would like to try the steps in this guide, HP Multifunction printers - how Scan: Mac OS X v10.6.

  How to scan an original of several page into one file

  Follow these steps to scan a multi-page document in a single file.

• LaserJet MFP M177fw Pro: Scanning and Capture of upgrade - not good - how to get back?

  Last update is frustrating and hostile - it seems to have lost the ability to adjust the brightness and contrast. Also the keystrokes needed are unexplained and difficult to suss out. How can I revert to the previous software?

  Hello
  
  Thank you for using the HP Forums.

  You can't go back.

  Try this alternative Scan software instead:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
  
  Let us know if it works.

• LAserJet MFP M477fdw Pro: software not install

  I tried several times to put my new printer LaserJet M477, but every time I get an error when you install the software on my laptop.  I tried to use the CD provided, downloaded from the Internet, using the HP program and I get the same result every time.

  Installer invites me to connect the laptop to the printer, through a long process, get to 99% done, then says installation takes too long, tells me to restart the computer and start again.

  The laptop is ASUS F555UA-EH71 15.6 inch, Intel Core i7, 8 GB, 1 TB Portable HDD, 10 Windows (64-bit)

  Any help would be appreciated.  Thank you.

  Called customer.  It took an hour or two, with staff support with remote access, and the printer is now setup and works very well.

• HP Color LaserJet MFP M277 Pro: scanning HP Color LaserJet Pro MFP M277

  
  

  Hello

  In the HP scanning software, verify that the Scan Sorce defined as ADF not as flat glass.

  Please let me know if any difficulties,

  Shlomi

• LaserJet MFP M127fn Pro: Scanning error RAM

  Hello

  I'm trying to scan a document. I open the HP scanning software and try a scan. The overview of the charges on 3/4ths of the way and then disappears. It is said he scanned and I can choose where to save it.  As soon as I did this, I get an error.

  "There are not enough available RAM to complete the scan. Please, reduce the resolution setting and try again.

  I stoop to the lowest option available 75 dpi, and I still get the same error. My system has 4 GB of RAM and only half is used. So I guess it's a software issue that brings up another question. The HP software will not uninstall.

  "An error occurred during the installation. If please restart your computer and try again. »

  So, naturally, I reboot and try again. It will not uninstall. It won't even uninstall in safe mode. I tried to use Revo and he used to uninstall with either. I called HP Support and they told me to reinstall my OS... Please point me in the right direction. An assistance is greatly appreciated.

  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.151230) - 0600
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: G31M-ES2L
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel (r) Core (TM) 2 CPU Quad Q8300 @ 2.50 GHz (4 CPUs), ~2.5GHz
  Memory: 4096 MB RAM
  Available OS memory: 4094 MB RAM
  Page file: 1720MB used, 6467 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 32 bit Unicode

  rb011,

  I emptied all the temporary files, empty the bin recycling and rebooted. No change at all. I have however decide to upgrade to Windows 10. After the upgrade, everything works without error. I don't know exactly what it was, but the upgrade set. Thank you for your time and effort!

• LaserJet MFP M127fw Pro: Scanning but does not print: print jobs that are just sitting in the queue

  I tried several fixes and nothing has worked.

  Uninstalling the software and printer and reinstalled from scratch.  Can see and scan, but never leave print jobs queue on the laptop

  HP Print ran and doctor Scan.  Could not get out print job, it becomes its own test in-house printer print

  I use wireless.  I tried as well to turn off wireless and use the wire and still get the same results.

  Hello

  I think you need to delete the queue. For Windows, try it please:

  Hold down the Windows key and press R.
  from the run window, type services.msc and press to enter.
  If the computer asks you to Admin, you have to accept that,
  regarder watch down to the print spooler service, right-click and select Properties
  Click the Stop button,
  Go to C:\Windows\System32\Spool\printers or C:\Windows\System\Spool\printers
  delete the job inside this folder
  restart the machine.

  Kind regards.

• LaserJet MFP M127fw Pro: Easy Scan

  Hello

  I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and the program title bar is grey. Clicking on it will make the menus work and I can see the name of material, but even to open a new session of analysis does not show the real program window.

  Appreciate any help.

  Thank you very much

  I'm responding to and mark my own post as solved.

  The solution was simple and as always, was not a problem with the system as much as the operator...

  Somehow the corresponding window opened onto a second screen-deleting now. So I couldn't see it. Muppet.

  See you soon

  Stig

• scan to email on Color LaserJet MFP M177fw Pro

  I'm trying to download the printable 'Scan to Email' on my Color LaserJet MFP M177fw Pro, but he continues to throw an error?

  When I bought the printer (yesterday), I was told that I could put up to Scan in a document and have it automatically send as an e-mail message to a recipient.  How to achieve this?

  Thank you!

  Hi grahammccarthy,

  Welcome to the HP Support forums.  I understand that you want to know how to scan to email using your printer Laserjet Pro MFP M177fw.

  You don't mention the operating system that you use, so I've included links to all the operating systems supported on the way to analyze.  There is a section called "How to scan with HP software" and there you can find a subsection entitled "How to scan to email.  It is in the subsection, you will find the instructions you need to follow to be able to scan to email.

  How to perform a scan: Windows XP

  How to perform a scan: Windows Vista

  How to perform a scan: Windows 7

  How to perform a scan: Windows 8

  How to perform a scan: OS X v10.8

  How to perform a scan: OS X v10.9

• HP LaserJet MFP M127fw Pro: I need a free scanner software for management.

  My all-in-one printer-scanner is HP LaserJet MFP M127fw Pro.  I need a software that will manage the scan function.  I don't know what these programs are called to a category, but what they do is:

  1. save my settings,

  2 tell the scanner if I want to do an overview of the control program to display,

  3 Let me drag a border to select the section of the preview I want scanned.

  4 tell the scanner to scan,

  5. display the scanned image or document,

  6 ask if I have another page in the same document,

  7. save the image or document where I want, with a name I go,

  8. save images in different formats,

  9 save documents in the .docx format, .tif and a few other formats.

  10. documents of OCR.

  My operating system is Windows 10.  A free program that makes the most of these things would be great, but if you recommend a program that is not free, I'll buy it if I can't find a free good.

  Can anyone recommend such a program?

  Thank you.

  Hello

  Its specifications:

  • Scanning with HP LaserJet scan request or TWAIN - or WIA compatible application software
  • Windows Scan SW supports the file format: RAW (BMP), format PDF, TIFF, JPG, PNG.
  • Mac Scan SW supports the file format: TIFF, PNG, JPEG, JPEG-2000, PDF, PDF searchable, RTF, TXT

  Source: http://store.hp.com/wcsstore/hpusstore/pdf/cz183a.pdf

  Scanning HP for MAC software that comes with the printer can make 1, 2, 3, 4, 5, 6, 7, 8 and 9. To docx, you can convert form RTF or TXT formats. For 10, you may need to purchase.

  For Windows, try it please:

  http://free-OCR-to-Word.en.softonic.com/
  http://www.free-OCR.com/

  for Word:

  http://Office.Microsoft.com/en-AU/Word-Help/scan-and-edit-a-document-HA010254879.aspx

  Good luck.

• Color LaserJet MFP M277dw Pro: MFP M277dw unable to connect to wifi

  I just bought the Color LaserJet MFP M277dw Pro, and I can't connect to wifi. I have it connected via a USB cable and it works fine, it's just that I can't seem to connect to my wifi. The wifi seems fine, just connect my existing devices right (MacBook, iPhone, iPad). It finds the network, but it seems to expire when I put the password to connect.

  Hi @StephanieB2,

  Welcome to the Forums of HP Support! I understand that you are having problems with the networking of the printer. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  It's really weird that the printer is expire when you put the network password.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You can also configure the printer on the wireless network, thanks to the Wi - Fi Direct connection.

  Tap the icon on the screen of the printer wireless.

  Select the Wi - Fi Direct connection.

  Turn it on, if it isn't already, and if there is a code it marks down.

  Then on the Mac, go to the airport icon and connect to the network printer. (Direct 69 HP Laserjet M277)

  If requested a code or password, put the one you noted.

  Then open Safari and type 192.168.223.1.

  He will be responsible: the printer Web server integrated.

  Click the network tab.

  On the left side of the window, select Wireless Network Configuration and fill your information.

  Apply the settings.

  Can connect you to your network.

  Then add the printer.

  Click on the Apple menu, click System Preferences.
  Scanners & printers, then click the plus sign +.

  Select the printer in the list.

  Select your printer from the drop-down and click on the Add button.

  Test the printer.

  If there is anything else I can help you, let me know. Thank you.