In an event 'No. Match Founf' discovery values attribute not transformed

Similar Questions

• Write multiple events created for a single value (signaling)

  Hello

  I have a program that checks continuously to check if a given amount of time has passed (e.g. 10 seconds). I pass the Boolean result to a case statement. In the case of FALSE, do nothing. Inside the case TRUE I wired the switch entry dealing with a property node: Val (Sgnl) in order to trigger an event. The actual value is not important, I just use it to trigger an event.

  When you view the event inspector window, I see two events are sometimes created at the same time, which causes problems in the rest of my code. I have the option 'max limit Instances"checked in the menu change events, as well as the number of Instances the value 1.

  Can someone please explain why this is happening and recommend a solution?

  Thank you.

  -Natsfan

  Add a wait of 1-2 ms to the loop in your main calendar.  It is conceivable that the loop takes less than 1 ms to run and you see the same time at two subsequent iterations of your loop and that's why you get sometimes two close triggered events

  I would not use a separate at all, but directly control the timing of the event timeout.

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• OBIEE error - Datetime-01-01 value does not match the specified format

  I get this error after the promotion of Production. It works perfectly well on the Test Server.

  I am using SQL server. After launching the date as a varchar, it works fine.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046]-01-01 Datetime value does not match the specified format. (HY000)

  Gurus of OBIEE please help

  JD

  I found the solution as well.

  The Windows Server ODBC driver was old (Version 6). I have who has upgraded to SQL Server Native Client 11.0 and everything works fine.

• SQL to match a single value in a comma-delimited text field

  I have a column that can contain zero, one or more recordIDs (from another table) stored as strings of text delimited by commas (for example, a list). I need to retrieve all the records that match a unique value within this list.
  
  For example, if I want to match all values recordID equal 3, and I use... WHERE MyColumn IN ('3'), I get all records that have EXACTLY 3 as the value of MyColumn, but not just any what MyColumn registers whose values include 3, if these are such instances as "3.17" or similar.
  
  Also using the LIKE operator - as WHERE MyColumn LIKE '%3% ' - make me records containing values (35) or 13...
  
  Can I use some kind of list processing ColdFusion speaker to output only the records you want?

  Normalize your database so that your data becomes available.

• Structure of the case: selector values are not unique

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  Jeff.F wrote:

  Get the error: case Structure: selector values are not unique...

  With the help of producer-consumer architecture w / SW-events and comms of queue.  DevSuite - LV2014

  My loop of consumers use a typedef for case selection control.  The typedef is an enum and the names of text for each value.  All my files are in quotes and there are no duplicates in the typedef or structure of the case.

  Help

  JF

  I don't know what you're doing exactly what I think. Do not write text in quotes for values box. Wire the enum in the switch case, right-click on the structure of the case and select "add a case for each value.

  It might be a little different because I'm teliing memory.

  Ben64

• TypeError: Error #1006: value is not a function.   mdas_fla::MainTimeline/ans() problem

  can you help me with this. This error pop up when I run my fla file.

  TypeError: Error #1006: value is not a function.

  at mdas_fla::MainTimeline/ans()

  This is my code:

  import flash.events. *;

  Import flashx.textLayout.conversion.PlainTextExporter;

  equal_btn.addEventListener (MouseEvent.CLICK, years);

  function ans(event:MouseEvent):void

  {

  var op: Array = new Array (String [10]);

  var num:Array = new Array(Number[10]);

  var dock: String;

  result_txt. Text = input_txt.text;

  keep = input_txt.text;

  var g:int = 0; var ctr:int = 0; var ctr2:int = 0; var str:String ="";

  while(g < Hold.Length)

  {

  If (hold.charAt (g) == '+' | hold.charAt (g) == '-' | hold.charAt (g) == ' *' | hold.charAt (g) == ' / ')

  {

  OP [ctr] = ' "+ hold.charAt (g);

  trace (op [CTR]);

  CTR ++; Ctr2 ++; Str ="";

  }

  on the other

  {

  Str += ' ' + hold.charAt (g);

  NUM [ctr2] = parseInt (str);

  trace (num [Ctr2]);

  }

  g ++ ;

  }

  var pl:int = 0; var val: Number = 0;

  for (var a: int = 0; has < op.length (); a ++)

  {

  Try

  {

  If (op [a] == ' *')

  {

  NUM [pl + 1] = num [pl] * num [pl + 1];

  }

  ElseIf (op [a] == ' /')

  {

  NUM [pl + 1] = num [pl] / num [pl + 1];

  }

  ElseIf (op [a] == '+')

  {

  NUM [pl + 1] = num [pl] + num [pl + 1];

  }

  on the other

  {

  NUM [pl + 1] is [pl] - [pl + 1] num num;.

  }

  }

  catch (error)

  {

  Val = num [pl];

  break;

  }

  PL ++;

  }

  trace (Val);

  result_txt. Text = "" + val;

  }

  pls... Help me solve this problem...

  Length() must be of length.  That is to say, the class array has a length property, no method.  Flash thinks you are trying to define a new function, length().

  PS so that debugging, click file > publishing settings > swf and check the box "enable debugging" so the number of problematic line of your error (s) is in error messages.  This makes it much faster to debug your code.

• Boolean value does not get stored in table correctly?

  Hello

  I use the following table to store several variables for similar movieclips:

  public var ballPlaced:Array = new Array(false, false, false);
  
  

  ... However, its not to store the Boolean value correctly in the table?

  I use the following code in the ZoneFill and the ZoneEmpty to assign a value true or false, for example;

  ballPlaced [event.target.name.substring (5)] = true;
  
  I called a trace to ensure that when an individual ball is placed in an area of the ballPlaced Boolean is true, and that seems to work because it returns a true value... However, I then called a trace to see the status of all and that is to say that all instances of the table are false?
  
  For example, I put ball0_mc in a box and the trace returns the following...
  
  Placed ball0_mc (true)
  Ball 0 is set, false: 1 ball is placed, false: ball 2 is set, false
  
  In this case the second line at the beginning should read "ball 0 is placed, it's true." I know I'm missing something critical here, but can't work out why the Boolean value is not get stored in the array?
  
  Here is my code... pointers would be greatly appreciated!

  package
  {
      import flash.display.MovieClip;
      import flash.display.DisplayObject;
      import flash.events.MouseEvent;
      import Ball;
          
      public class EgoGame extends MovieClip
      {
          public var _zone0Full:Boolean = false;
          public var _zone1Full:Boolean = false;
          public var _zone2Full:Boolean = false;
          
          public var ballPlaced:Array = new Array(false, false, false);
          
          public function EgoGame()
          {
              ball0_mc.addEventListener(MouseEvent.MOUSE_DOWN, zoneEmpty);
              ball1_mc.addEventListener(MouseEvent.MOUSE_DOWN, zoneEmpty);
              ball2_mc.addEventListener(MouseEvent.MOUSE_DOWN, zoneEmpty);
              
              ball0_mc.addEventListener(MouseEvent.MOUSE_UP, zoneFill);
              ball2_mc.addEventListener(MouseEvent.MOUSE_UP, zoneFill);
              ball1_mc.addEventListener(MouseEvent.MOUSE_UP, zoneFill);
              
              ball0_mc.addEventListener(MouseEvent.MOUSE_UP, playMovie);
              ball1_mc.addEventListener(MouseEvent.MOUSE_UP, playMovie);
              ball2_mc.addEventListener(MouseEvent.MOUSE_UP, playMovie);
              
                  
          private function zoneEmpty(event:MouseEvent):void
          {
              if(event.target.hitTestObject(zone0_mc) && _zone0Full == true)
              {
                 _zone0Full = false;
                  ballPlaced[event.target.name.substring(5)] = false;
              }
              else if(event.target.hitTestObject(zone1_mc) && _zone1Full == true)
              {
                  _zone1Full = false;
                  ballPlaced[event.target.name.substring(5)] = false;
              }
              else if(event.target.hitTestObject(zone2_mc) && _zone2Full == true)
              {
                  _zone2Full = false;
                  ballPlaced[event.target.name.substring(5)] = false;
              }
              else
              {
                  event.target.x = event.target._startX;
                  event.target.y = event.target._startY;
                  ballPlaced[event.target.name.substring(5)] = false;
              }   
              }
          
          private function zoneFill(event:MouseEvent):void
          {
              if(event.target.hitTestObject(zone0_mc) && _zone0Full == false)
              {
                  event.target.x = zone0_mc.x;
                  event.target.y = zone0_mc.y;
                  _zone0Full = true;
                  ballPlaced[event.target.name.substring(5)] = true;
                  trace(event.target.name + " Placed (" + ballPlaced[event.target.name.substring(5)] + " )");
              }
              else if(event.target.hitTestObject(zone1_mc) && _zone1Full == false)
              {
                  event.target.x = zone1_mc.x;
                  event.target.y = zone1_mc.y;
                  _zone1Full = true;
                  ballPlaced[event.target.name.substring(5)] = true;
                  trace(event.target.name + " Placed (" + ballPlaced[event.target.name.substring(5)] + " )");
              }
              else if(event.target.hitTestObject(zone2_mc) && _zone2Full == false)
              {
                  event.target.x = zone2_mc.x;
                  event.target.y = zone2_mc.y;
                  _zone2Full = true;
                  ballPlaced[event.target.name.substring(5)] = true;
                  trace(event.target.name + " Placed (" + ballPlaced[event.target.name.substring(5)] + " )");
              }
              else
              {
                  event.target.x = event.target._startX;
                  event.target.y = event.target._startY;
                  ballPlaced[event.target.name.substring(5)] =false;
                  trace(event.target.name + " Placed (" + ballPlaced[event.target.name.substring(5)] + " )");
              }
              trace("ball 0 is placed, " + ballPlaced[0] + "  :  ball 1 is placed, " + ballPlaced[1] +"  :  ball 2 is placed, " + ballPlaced[2]);
          }
          
          private function playMovie(event:MouseEvent):void
          {
              if (ballPlaced[0] == true)
              {
                  ball0_mc.gotoAndPlay(2);
              }
              else
              {
                  ball0_mc.gotoAndStop(1);
              }
              
              if (ballPlaced[1] == true)
              {
                  ball1_mc.gotoAndPlay(2);
              }
              else
              {
                  ball1_mc.gotoAndStop(1);
              }
              
              if (ballPlaced[2] == true)
              {
                  ball2_mc.gotoAndPlay(2);
              }
              else
              {
                  ball2_mc.gotoAndStop(1);
              }
          }
          
          
      }
  }

  have you checked to see what event.target.name.substring (5) is back?  (TIP: check it out)

• Can I TEMPORARILY disable or Turn off match without opt-out, so the matching and download process does not occur until I want to him and re-enable/turn back on?

  Can I TEMPORARILY disable or Turn - off Match without opt-out, so that the matching process and upload does not occur until I want what he and re-enable/turn it on again?

  Hello

  Yes, but why do you want to disable iTunes game? When you subscribe to Match iTunes, your library is analyzed to determine what can be matched or must be downloaded. When the scan is complete, your library will be updated automatically when you add new tracks or edit metadata.

  Jim

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• Medium need to return false if a value has not yet been written.

  I am a new user of labVIEW here looking for a way to return false if the value has not yet been written.

  I am using the "select" tool to swap between values early enough in my simulation. However, it requires data that has not happened yet, so I need something that is waiting for the value to write.

  Is it possible to use a while loop to wait until TRUE or FALSE (instead of NULL) has been written and then change the frequency?

  All instances of data in LabVIEW (controls, terminals, constants, shift registers etc.) have a value, there is no concept of NULL.

  A Boolean control, before write you, will be its default value (probably false). A string will be empty (but not NULL, it is always valid). A digital will be zero, a reference is not valid (possibly equivalent to NULL, but this terminology is not used.)

  Can you describe your needs more detail, I don't understand what you need to do.

  If you want to wait for a change in value (Boolean to change true), then survey (read several times) from the Terminal command in a while loop with it connected directly to the terminal of condiitional. Its default value of False will cause the while loop loop continuously until the value is set to True. I would advise to insert a short wait inside the loop so that it hoggig a CPU.

• Reset the default value does not

  'Reset to the default value' does not work for my ListBox multicolumn, but it works for my string flags.  Someone at - he never encountered this before?

  I tried to remove all the elements and setting "default value to', but after another execution of the program, still not reset to nothing.  I have to do it programmatically in my code, and I can't do using the server reference VI Reset at the same time.  I have to define arrays of strings individually to null.

  I use a large number of nodes of property in my loop of consumer to read/write the values in the front panel.  Not sure if this is related.

  Thank you.

  This occurs because the value of a multicolumn listbox is a digital scalar or table (depending on the selection mode of the control) Express which line or the currently selected cell.

  "Reset to default" only resets the values and no other properties. In this case, it is the property of ref that hosts that we consider intuitively the value of listbox mc, but it's not.

• iDRAC error on PowerEdge R720 (SWC0700: iDRAC is not ready.) The configuration values are not available.

  My PowerEdge R720 started with iDRAC Initialization Error as topic above.

  SWC0700: iDRAC is not ready. The configuration values are not available.

  Noise of FAN after pressing F1 to continue. Please what can I do? It's my edge transport server and it is now off to find out what needs to be done. Please notify.

  Been,

  Network administrator,

  ExecuJet Aviation Nigeria.

  Hello, I'll email you to ask for the serial number. Thanks Marco

• When I try to "Optimize the readers", I get "Value is not available" on a SSD

  I am running Windows 8 Pro. I can't optimize my SSD. I read online that I should be able to click on "Optimize" and who would send my SSD TRIM data in order to improve its performance. But currently "Analyze" and "Optimize" buttons are grayed out for my solid state drive. The current state also show "optimization is not available.

  Thanks for any help.

  Same thing here.

  Went to Windows "Optimizing disks", click on optimizing, but he said "Value is not available" and then the button "Optimize" changed in gray.

  When I manually ran the automatic Maintenance (Control Panel > Action Center > maintenance > start maintenance), I noticed a lot of reading and writing for the SSD during the maintenance process.  So I opened 'Optimize the readers' and he has done exactly as she was running the Disk Defragmenter (despite it, grateful that he was a Solid State Drive).  I looked in the resource monitor to see what that wrote for the SSD and I don't remember the exact name of the process, but it was something with defrag in the name.  I had already done Windows Experience Index before that, then Windows knew that an SSD has been installed and it showed as such under 'média Type', so I don't know why it was running a disk defragmentation.

  I just ran the automatic Maintenance again, but this time it doesn't seem to be running defrag as it did the first time I ran it.  But, it continues to display "Value is not available" to optimize disks.

  Then, when he says "Value is not available", which means exactly?  DisableDeleteNotify showing 0 (indicating the PAD is on), but is windows sends always TRIM wants the SSD or not?

• Change the value attribute for the order of the sequences

  Dear Java expert.

  I've been trying to script. Find/replace the value attribute (id) for the order of the sequences (screenshot attached for your reference). It is fair to the script?

  Example:

  ID = change of table8_3 ID = table8_1

  ID = change of table8_3 ID = table8_2

  ID = change of table8_3 ID = table8_3

  

  Please suggest friends.

  Thank you in advance,

  Hello

  Something like that...

  var doc = app.activeDocument;
  var _XML = doc.xmlElements[0];
  var _XMLelements = _XML.evaluateXPathExpression("//*/table[@id='table8_3']")
  
  for(var i=0;i<_XMLelements.length;i++){
      _XMLelements[i].xmlAttributes.item("id").value= 'table8_' + (i+1);
  }
  

  Concerning