In cross-platform data movement

Similar Questions

• Buddy API Cross-platform projector

  I am trying to create a cross-platform projector that contains the buddy api xtra. I looked in various forums on how to do this and followed the steps but with still some problems. I do it on a PC on Director MX 2004. Here's what I did so far, anyone see what I'm doing wrong?
  
  I downloaded the mac version of buddy api (Buddy API Xtra.data & Buddy API Xtra.rsrc) and placed them in Director MX 2004\Configuration\Cross platform Resources\Macintosh
  
  Modified the xtrainfo.txt and added the line at the bottom:
  [#namePPC: "Buddy API XTRA", #nameW32: "budapi.x32"]
  
  But when I try to create the Macintosh projector to the Manager I get the error message:
  ' Can not find the file xtra "BudFile.x32". Continue to create projector?
  
  What I have not donestand is the .x32 additional windows which I included in the projector thorugh modify > movie > Xtras...
  
  HEELLLLLLLPPPPPPPPPPPP

  > when I arrived to modify > movie > Xtras - both budapi.x32 and budfile.x32 are present

  You use functions of BudFile? Should it be included?
  You quoted the error message means that the inclusion of BudFile is
  failing, not Buddy API. If you need the Xtra of split and change your
  xtrainfo.txt file, etc. as you described in your first post - but for
  Buddy file too.

• Boot camp unrecognized cross-platform records

  So here's a little history, I had an installation work of Yosemite and Win 7 ultimate running on my MacPro 3.1 beginning 2008, saw disks cross-platform with the standard read write limits, data was all mixed-platform so I decided to backup my stuff at the same time, wipe and do a clean install, I only have a disc of snow leopard OSX so I wiped and did a clean install with one of there , I noticed there was a worm even newer to avalible OSX install El Capitan then I updated level and attempted to do a training camp, although bootcamp and apples website says that my machine would support 7 when you enter the disk, he said I could do only a win 8 64-bit installation, I did not no more nor want to. It's jogging my memory that I had to modify the plist for the first time I did this, so I started to do some reading and what appeared to be the fastest workaround has been download a copy of bootcamp 4, because the new version does not support mixed installation of the iso (32 & 64 bit ver on one disc) did the installation went well spent ran boot camp software Player was not grateful so I tried to connect to the internet and there was a problem any appeared adapters but I just couldn't join the network and other issues at random so I started back in OSX deleted the partition and booted, this time networking the problem has been resolved but hard disk recognition was still a question , from windows I can openboot camp software and select this option to start card, but can not see the player mac, Mac I see windows on the desktop player but does not not in the utility disc or bootcamp and a target boot disk.

  Sorry for the long background but I seem not to be the only person having this problem perhaps this may help understand why its happening and lead to a better solution, aka prevent it

  Here is the info that you seem to need to read the other discussions on this topic

  I read the solution for the subjects to which I'm fairly certain that I'm having the same problem with and I am confident in preforming the required steps, like to confirm that, that is the question and what numbers should I use in my case for steps 7 and 8 and help is greatly appreciated.

  Thank you!

  Please after the release of

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

• ORA-12705 unknown or invalid nls parameter during linux Data Mover psdmtx

  Hello. I install the following peoplesoft products:
  
  Tuxedo 10gR 3
  PeopleTools 8.52.00
  HRMS 9.10
  WebLogic 11 GR 1 material
  
  My operating system platform is oracle enterprise linux 6 (2.6.32 - 71.el6.x86_64 #1 SMP). Several houses of oracle database are in place. Oracle 9i, 10g and 11g are all installed in different places on this machine. The operating system oracle and peoplesoft to os account (ex: pshrtest2 - os peoplesoft administrator account) select or choose what version of oracle at the time of the connection; 9i, 10g or 11g. Currently, I am trying to create the HRMS 9.1, database of demonstration of peopletools 8.52 in Oracle 9i. I am familiar with the manual steps of generation of database demonstration using Data Mover (linux: $PS_HOME/bin/psdmtx). This version of demonstration via Data Mover manual step is a failure for the peopletools, 8.50.00, 8.51.00 and 8.52.00, but he managed to previous revisions of peopletools such as 8.48.00, 8.48.10, 8.49.00.
  
  Control Data Mover:
  
  psdmtx CT - ORACLE - CD HRTEST2 - CO SYSADM - CP SYSADM - CW - PEOP1E - FP dbsetup.dms PEOPLE
  
  error of the Data Mover:
  
  PSDMTX error: access code
  Reason: Couldn't sign database HRTEST2 with user SYSADM.
  
  Mover track #1
  file: datamover.trc
  
  ? appsrv.3917 (-1) [27/11/12 00:33:03] (0) used Cache Directory: / media/v02/psoft/hr852test2/PS_CACHE/CACHE/1 /.
  ? appsrv.3917 (-1) [27/11/12 00:33:04] (0) Cur #0.3917.HRTEST2 RC = 12705 hard = 0.432763 create login information = primary, HRTEST2, PEOPLE, handshake = 0000000000000000
  ? appsrv.3917 (-1) [27/11/12 00:33:04] (3) file: error SQL Access ManagerSQL. Stmt #: 2 error Position: 0 return: 12705 - ORA-12705: unknown or invalid NLS parameter value specified
  
  Mover track #2
  
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 PSORA initializing
  PID: 3948 TIMES: killed Nov 27 00:42:17 maximum cursor to initialize PSDB 2012 = 1024
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 environment change: NLS_LANG = AMERICAN_AMERICA. UTF8
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 initialized PSORA
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 PSORA_Initialize() nStatus = 0 0 0
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 attached to the new server HRTEST2 0 9.200000
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 cannot start session
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012: 12705 oracle error code
  PID: 3948 TIMES: killed Nov 27 00:42:17 2012 ORA-12705: unknown or invalid NLS parameter value specified
  PID: 3948 TIMES: killing Nov 27 00:42:17 PS-sqlcch (0000000000000000) 2012
  PSDMTX error: access code
  Reason: Could not sign database HRTEST2 with user SYSADM
  
  The linux operating system user account that is used to run Data Mover is, pshrtest2. Via the account of pshrtest2, I am capable of correctly tnsping the HRTEST2 database. I am also able to connect to the HRTEST2 database successfully through sqlplus as follows:
  
  export ORACLE_SID = HRTEST2
  people/peop1e sqlplus
  sqlplus people/peop1e@hrtest2
  sqlplus sysadm/sysadm
  sqlplus sysadm/sysadm@hrtest2
  
  HRTEST2 nls_database_parameters
  
  NAME
  ---------
  HRTEST2
  
  1 selected line.
  
  
  VALUE OF THE PARAMETER
  ------------------------- -----------------------------------
  NLS_LANGUAGE AMERICAN
  NLS_TERRITORY AMERICA
  NLS_CURRENCY $
  NLS_ISO_CURRENCY AMERICA
  NLS_NUMERIC_CHARACTERS.,.
  WE8ISO8859P15 NLS_CHARACTERSET
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT DD-MON-RR
  NLS_DATE_LANGUAGE AMERICAN
  NLS_SORT BINARY
  NLS_TIME_FORMAT HH.MI. SSXFF AM
  NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
  NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
  NLS_DUAL_CURRENCY $
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  NLS_NCHAR_CHARACTERSET AL16UTF16
  NLS_RDBMS_VERSION 9.2.0.4.0
  
  20 selected lines.
  
  Ora-12705 error is only being received from the peopletools 8.50.00 and above (8.50.00, 8.51.00, 8.52.00) revisions. This error is also received through the application server, even if the original demonstration database has not yet been built. This ora-12705 error is not generated in the previous revisions of peopletools (8.48.00, 8.48.10, 8.49.00). What possible environmental settings can be established and used to address this issue (ex: $NLS_LANG, $LANG)?

  Please, Nicolas.

  The construction of database of demonstration on oracle 10g solved the error ora-12705.

• Cross Platform Application

  Hello everyone,

  We are trying to develop an application in our Organization, which must run on different tablets. Tablets can be either iOS, Windows, Android or Blackberry OS based. My question is:

  Would be the same code (with perhaps bit of customization) is sufficient for all or we would need to have separate development (and effort) for different OS.

  If no separate then development Flex 4.5 is a buy it now for us :)

  Also, please tell us if people lived all important issues (especially with the graphic components & live data via webservices connectivity) while developing applications for devices not based on windows using Flex 4.5 or it is a veil of sweetness.

  All input will be greatly appreciated.

  Thank you

  AP

  AIR is designed to allow you to make cross-platform development, sharing the same code. In our Organization, I learned flash/flex and made a soft complex (connection with a web server to share audio/images/xml), the dynamic generation of forms, compression of photo, drawing, pdf generation and widgets personalized and many more) before the end of the trial version of Flash builder...

  We made then it... You must download the trial and try it for a few days. You will see how it is easy to develop a solution that works on AIR, iOS, Blackberry, Windows, Mac and Linux tablet...

  For graphics and live connectivity, you can check this app (http://www.adobe.com/devnet/flex/samples/sales-dashboard-application.html).

  What you need to know is that there are limits (but Adobe strives to implement new features) in the ATMOSPHERE. If you need access to a large number of sensors or native phone API, AIR might give you a hard time...

  Good luck!

• Cross-platform publishing

  Hi all:
  I want to create a simple project. its a page that has a button that opens a PDF file, and I want it to be cross-platform. I got the jargon to work no matter what platform it's in. I have my Xtras folder next to my project. I have a folder of resources of the Cross platform, with a Macintosh folder it contains and an Xtras folder it contains. When I publish my movie, he tells me that he does not find "budapi.x32. I placed budapi.x32 in the folder named Xtras next to my film and I've also embedded the xtra via Edit > Film > xtra method. I have my xtrainfo.txt file but I don't know where to place them. I tried publishing with the .txt in different places, but I still get the error.
  
  Any ideas what I am doing wrong?
  
  Thank you all.

  I doubt very that strongly that it's your Mac, but that is possible. Zip up
  your Mac projector and send it to me. I'm going to test and see if it is the
  projector at fault (which is I guess) or if it's your Mac.

• Full restore of the database of RMAN cross-platform

  All the
  
  I have a database 10.2.0.3 on Solaris 10 OS.
  
  I did a full upward (level 0) this database using rman with auto save on. I'm trying to worl on a scenario where I could restore that backup on another linux machine. so I copied all the elements on the target linux server backup. go to a local installation of RDBMS (10.2.0.3) on the linux machine I'm trying to restore the database... but does not yet...
  
  When I deliver restore spfile or restore the control file a + < backup file name > +; the guest continues search in rear location that responded to the questionnaire didn't tell no piece found backup... Here are the encode stage, I'm...
  
  
  1. set up env on the linux server
  
  2 rman target /.
  
  (instance not started but rman to connect)
  
  3 set the DBID = + < ID DB data source running on Solaris > +.
  
  It run set dbid =
  
  4 startup nomount
  
  as the pfile/spfile file is not available in $ORACLE_HOME/dbs on a linux machine picks it up pfile by default however, but the instance stars no Assembly...
  
  5 restore spfile to ' / u01/app/oracle/product/10.2.0/rman_bkp/c-300009955'
  
  Here, he is not able to restore any thing.same is the case with the control file.
  
  Ideas please advice
  
  Sarat

  Sarat Chandra C wrote:
  Thanks for the referance. Now, I understand that I am not able to use the transportable database command to carry the entire db. However, there is a line in the 'Cross-Platform Database Transportable Restrictions' that says ++ 'main restricting cross-platform transportable database is that the platform of source and destination must share the same endian format. For example, while you can transport a database from Microsoft Windows to Linux for x 86 (the two little endian) or HP - UX, Aix (the two big endian), you may not carry a set of base HP_UX to Linux for x 86 using this feature. You can, however, create a new database on a destination manually, and necessary transport of tablespaces of the source database platform using cross-platform transportable tablespace as described in "Cross - Platform Tranportation Tablespace: CONVERT DATAFILE or TABLESPACE. » +

  I understand that if we are willing to carry each tablespace from Source to target individually, may then be able to replicate a transportable database. Fact the transportable tablespace have not all restrictions has obtained from the database of transport compared to the platform and Endian? Please specify.

  Also is there a matrix of support for thr transportable database and tablespaces which we could see?

  Kind regards!
  Sarat

  Sarat,

  The same restriction that is there for the transport of the whole base is quite real for the transportable tablespace as well if you go to the cross-platform. Endian must match across platforms that only you can do otherwise, as the database feature, you must convert the source file to the target-endian.

  If you look at the doc of reference order of unlocking Tablespace
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14194/rcmsynta063.htm#RCMRF1919

  This restriction is documented here in addition to the other restrictions
  ,
  >
  Restrictions and antonyms

  Limitations on the creation of tablespace portable games described in the Oracle database administrator's Guide apply to transport backup storage spaces, with the exception of accountability read-only storage.

  TRANSPORT TABLESPACE does not format endian conversion. If the target platform has a different endian format, you must use the CONVERT RMAN command to perform the separate step of conversion of data files endian format portable overall.
  >

  HTH
  Aman...

• What is the right way to this cross-platform application?

  Hey y ' All

  I am a multimedia application with LV2010 and I am trying to do cross-platform (win and mac os x).

  The I need the feature requires the use of system libraries, I have access to enough similar functions in the two operating systems

  (winmm.dll in windows, coreMidi.framework in mac OS X)

  With the exception of the current system of appeals on the screws will be identical.

  I can do the work of VI in a platform by using the call library function node, but I don't want to have two copies of everything.

  I tried to do sub wrapper VI that puts the call library function node in a case statement and detects the OS but this VI will not executable due to dependencies (will not find the library referenced in one of the cases depending on the operating system you are running)

  Is there any way I can specify what Subvi to load on a project or something to get this issue sorted dependency?

  You want to encapsulate the platform-specific code in a conditional structure disable with a condition for each supported platform.  The symbol of the OS is already defined; see Help for the creation of disable Conditional Structures, which lists the predefined symbols and values.

• Rocket League cross-platform on Xbox it?

  I was wondering if Rocket League will be cross-platform with the PC, when it comes to Xbox in February?

  Hello

  Please visit this link and check that helps:

  http://News.Xbox.com/2015/12/03/rocket-League-blasts-onto-Xbox-one/

• Scalability and cross-platform Web Viewer features

  If I understand door MEA Mobile apps, our company is interested in using AEMM provided the web viewer is cross-platform capable.

  On the phone, the web viewer support a sensible overview; However, seems to want to launch the application.

  On Tablet (iPad, at least), the web viewer displays the message: "this content is no longer available.  "Download the application to enjoy similar content."

  On the desktop, the experience is good; However, what scalability is possible; as the sensitive available refining?

  This ability would be major for our society - both in the launch of new projects, as well as our full range of editions of the migration.

  The web viewer only works on desktops and laptops. It is not supported on phones and tablets.

  Extensibility for web office viewer is similar to iOS and Android apps. Creating workflow API and most APIs Cordova associated with the application, user, device and content work similarly in web viewer as they do in iOS/Android, but Cordova APIs that are specific to mobile devices (such as the camera and geolocation) do not work in Office web viewer.

• Upgrade question when on task 2-13-8: running the utility rename Data Mover

  Currently of the problems when you try to perform this task in the wizard to change.  When Assistants change automatically runs the engine program of Application UPG_REN_DMS, that fills the Data Mover rename script.  We eventually found an error.  We really do not understand why this is happening.  We also tried to launch the application in mode of two levels and still get the same error message.

  Upgrade of renaming process started: 2015-05-13 - 09.28.31.000000 (18030,8)

  The D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\rnupgrcdfld.dms file open failed: no such file or directory. (2 633) UPG_RENAMES. Utilities.OnExecute name: openLog statement PCPC:1231: 27

  Called from: UPG_RENAMES. Utilities.OnExecute name: DeleteFile statement: 73

  Called from: UPG_REN_DMS. PRINCIPAL. GBL.default.1900 - 01 - 01.CleanUp2.OnExecute statement: 2

  Game number of messages: 2

  Number of messages: 633

  Reason for the message: the file %1 failed: %2. (2 633)

  Treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Game number of messages: 108

  Number of messages: 524

  Reason for the message: treat 30055 ABENDED to step UPG_REN_DMS. PRINCIPAL. CleanUp2 (PeopleCode) - RC = 8 (108 524)

  Process %s ABENDED to %s.%s.%s (step %s) - RC = %s

  The AE UPR_REN_DMS generates the rnupgrcdfld.dms with data imported from version 9.2 on a previous step. It seems that EI is not able to find the D:\peoplesoft_update\output\HCM91to92_PI9_AppOnlyxml_HCUPG1_InitialPass\\ directory. Please make sure that the directory of output on the tools-> Options - general tab do not have a double slash reverse and also make sure that the directory exists. Please post another reply after the control if you are still not able to execute the step.

• Cloud sync problem creative cross-platform

  I have a problem with the photos on my Windows PC CC only appear file is not in my iphone app or ipad to lightroom?

  If I edit a photo on my ipad it synchronizes and is visible on the application of lightroom on my iphone but not in my folder of creative cloud on my windows PC? I thought it was cross-platform? all applications are signed on the same account.

  I thought that all files would be sync between pc and iOS apps winows as long as they are signed into the same account. But if I put a picture in my folder of creative cloud on my windows pc's will NOT sync to my iphone or ipad? Why?

  Help please

  Post edited by: Neil Holsgrove

  For what that this either to synchronize with devices, CC all photos must be in the CC folder not anywhere else on the computer.

  LR mobile uses no CC to synchronize photos, you can install mobile on your iPhone If you wish.

  As I said to use the CC to sync application, the photos must be in the CC folder on the computer!

• PS - Pt 8.54 - post-installation Data Mover

  Hello

  I have installed PT8.54, created the database for the application, ran 6 required sql scripts.

  now, I logged in Data Mover in bootstrap mode.

  When I start the installation of database, options below appears.

  system:

  PeopleSoft HCM demo database

  The PeopleTools system database

  Demo:

  PeopleSoft HCM demo database

  I installed for the first time on my laptop. I wonder what I have to select the two system databases in Data Mover?

  If I select only demo, I think that I will not configure peopletools system database; Please specify.

  Thank you

  RK

  A demonstration of the system database is a Peoplesoft database without any dummy data, but all the operation generally for purposes of TST, QA and PROD.

  A database system is a database of Peopletools without Peoplesoft module, generally used to performance monitor.

  A demonstration database is a database of Peoplesoft with dummy data for study and demo.

  Choose the one that is more appropriate to the use you want, very probably a demo.

  Finally and above all, whatever you choose, it will install Peopletools, you don't have to install them separately.

  Nicolas.

• Data Mover Peoplesoft HCM 9.2 error

  Hello

  I try to install Peoplesoft HCM 9.2 demo on Virtual Box. When executing the < SID > .ora (PSHRDEMO. ORA) file in data mover, the process fails when it tries to execute the statement ENCRYPT_PASSWORD *; All the previous installation steps performed without error.

  Error message: process aborted. Perhaps due to the JVM is java class not available or missing or blank password.

  I checked the psoprdefn table and the password (field operpswd) is met. I installed the JDK (Oracle JDK 7 55 of update for Microsoft Windows (64-bit) x 64) that came bundled with HCM 9.2 on delivery.

  Searched the web but found no solution. Creates a new 9.2 and loaded with old JDK VM comes with HCM 9.0, still the same error.

  Kind regards

  SID

  Please find below the solution provided by oracle and a workaround suggested that the user:

  action mod: Sorry, but the copy & paste MOS is not allowed, the content removed>

• Data Mover, lack of PeopleSoft HCM system database - shows only DMO

  I install HCM 9.2 with PT 8.53 on Windows Server 2008 R2.

  Here's what I've done so far for the installation:

  Binary database Oracle - 64-bit

  Oracle client - 32-bit

  Oracle Database patch (I applied Patch 18940194: ORACLE 11 G 11.2.0.3 PATCH 32 BUG for WINDOWS (64-BIT AMD64 AND INTEL EM64))

  JDK

  WebLogic

  Tuxedo (restart the computer after the installation of Tuxedo)

  PeopleTools 8.53

  Patch PeopleTools (I applied Patch 18495092: PT 8.53.13 PRODUCT PATCH)-minimum 8.53.02 required for HCM9.2

  Install the software of PeopleSoft - HCM 9.2 application

  Configure Configuration Manager

  Install the database

  -CREATEDB10. SQL (as sysdba)

  -UTLSPACE. SQL (as sysdba)

  -DBOWNER. SQL (as sysdba)

  -HCDDL. SQL (as sysdba)

  -PSROLES. SQL (as a manager/system)

  -PSADMIN. SQL (as a manager/system)

  -CONNECT. SQL (as a manager/system) * specify people/peop1e for the username and password login ID

  Now, I'm at the stage where I run Data Mover "Database Setup".  The question is, I don't see the "PeopleSoft HCM SYS to database - US English" option.  I returned and checked my HCM application 9.2 install logs and everything has been installed successfully.  Why is this lack?  Why do I see only the database of demonstration of HCM?  Did I miss a step?  When to update the database to reflect the PT 8.53.13 patch?  At what point can I run HCINSSYS. DMS?

  

  I discovered he is a documented Bug.  Oracle says that when we click on the option button 'System', appears "PeopleSoft HCM Demo Database - US English" but it was typo and it's really the PeopleSoft HCM system database.

  On MOS, see: list of Application Peoplesoft in DB installation appears not HCM HR database

  What points you:

  Bug 16636276 - DCW SAYS DEMO WHEN TRYING to INSTALL the SYSTEM DATABASE

  has been created to solve the problem