In Hotmail, after the sign in still displays this 'error on page', cannot check emails

Similar Questions

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting.

  connection problems on hotmail through msn

  After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnecting

  Hello richardcatchpole,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• my free student program has just ended and I sign a membership paid creative cloud. After the payment, I still can't open my photoshop.

  my free student program has just ended and I sign a membership paid creative cloud. After the payment, I still can't open my photoshop.

  is this normal? How can I get my open photoshop application after completing the payment?

  Please use the following steps.

  1. Download creative Cloud desktop application from the link Download Adobe Creative Cloud apps | CC free trial Adobe
  2. Sign in using your Adobe ID and password.
  3. Go to the applications Panel and install the CC 2014 of the required application.

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  My win xp sp3 displays this error 0X000000F4 (0 x 00000003, 0X80ED4020, 0X80ED4194, 0X805D2970) in the start time menu some time pc works without error after 2 or 3 p.m. shows this message what solution help me please

  This problem is solved replaced smps problem is resolved. Maybe the smps is not given the correct voltage

• Hi, I tried to download the trial version free photoshops and after I sign in I get this pop up message saying ' unable to reach adobe servers, please check your firewall settings ", I checked the and there is nothing wrong with the firewall, is

  Hi, I tried to download the trial version free photoshops and after I sign in I get this pop up message saying ' unable to reach adobe servers please check your firewall settings ", I checked them and there is nothing wrong with the firewall, is there a problem with the adobe servers? can someone help me?

  Please try the steps mentioned in: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System

  

• After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9

  After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9... my East of 1366 X 768, so the games are run with black screen on the left and right sides... What can I do? He has run well in Vista =]

  1366 x 768 is the strangest resolution that I've ever heard of. Your video card drivers helped "keep the proportions" and decided to not to stretch imagine because I assume that you can't choose this exact resolution in the game. If your monitor has an overdrive video or image format option, you can enable or disable that or if you have a NVidia card, you can change the picture format option in the properties of the video card.

  If you have an ATI card, then you're stuck with a proportional image: P
  

• I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received and after the British insatalling encyclopedia and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem? IM using Vista Home Basic 32-bit.

  It comes with Vista, upgrade install and activate Forum.

  Try in Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon. Mick Murphy - Microsoft partner

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• My backup recently stop working and displays this error message: "failure irremediable 0x8000fff.

  I have recently, I lost all of my info by e-mail and went to try to recover from a backup. discovery of my backup has stop working and displays this error message: "failure irremediable 0x8000fff.   Doesn't sound good!  What happened and how can I solve this problem?

  Hello

  Method 1:
  You can follow the steps provided and check.

  Check the VSS service. Follow these steps:

  a. Click Start and type services.msc in the search box.

  b. Locate the VSS service and make sure that the startup type is automatic.

  i. right click on the service

  II. If the service is stopped, then start the service

  III. Select Properties

  IV. and in startup type, select automatic.

  c. click Ok.

  Method 2:

  
  You can also perform a clean boot and check:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:

  I also suggest to run the disk clean tool and check if it helps.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• I got this message: error. Page cannot be displayed. For more details, please contact your service provider. (9)

  When I tried to access the site stationeryheaven.com , I have a white page with this error message. Error. Page cannot be displayed. For more details, please contact your service provider. (9)
  It has been long since I have been on this site, but why I would get a message like this?
  INIE

  Broken website, same error here on FF or IE.

• When I go online for Age of Mythology the titans dilation I get this error message "there is an age of mythology update version must play" even if I updated it!

  When I go online for Age of mythology the titans expansion I get this error message "there is an age of mythology update version must play" I've updated the expansion and the original version. I don't understand what is happening.

  This sounds like the game that you are trying to reach has either some modules additional (mod/maps/scenarios) installed to which you don't have not or have some sort of update (once again that you do not have). Try to join another game or create your own.

  In addition, this can happen if you have changed your game executable by installing the hotfix that is not supported.