In mode Optimus (W520) high battery drain

TL; DR version:

When the BIOS is set to the integrated graphics card, the energy consumption on W520 is 10-14 watts. If you select mode Optimus, it's more than 25 watts (less than 4 hours). What gives?

---------------------------

Hi, I got W520 (2820qm, Quadro 2000 m, 16 GB HyperX) and as I was installing a new SSD drive, I reinstalled Windows 7 from zero (mode UEFI), installed the driver ethernet card and all of the installed update system you need.

The problem is that when the system is running on battery power, the power consumption is more than 25 watts, resulting in less than 4 hours of autonomy, unlike the reports + hours mode Optimus 7 comments. I suspect it is a problem with the drivers/settings/etc. to card technology/nVidia Optimus, since when I switch to the integrated in the BIOS graphics, use of power supply goes from 10 to 14 watts, which seems normal.

I have already tried:
-installed system update drivers Lenovo
-latest Intel drivers and more recent nVidia Verde drivers
-Latest BIOS
-activity nVidia icon in the status bar, he said that no programs are running on discrete GPU
-settings nVidia resetting to default values
-searching the Internet for several hours (found nothing) solutions
-juggle with the Manager of power, trying to Stretch Battery settings (got as low as 20 + watts, who is still only 4.5 hours)

Anyone have any idea what may be wrong or anything to check? Is this a known issue?

(Also, on an unrelated note: has high DPC latency with audio abandon, had to disable TCP and discharges of IPv4 on Intel wired NIC)

It works fine for me with a clean install, latest version of the bios, latest intel + nvidia drivers. Manager power shows the nvidia icon or not? The gauge must be 100% for graphics, no icon showing nvidia. The nvidia tray icon should be gray.

Tags: ThinkPad Notebooks

Similar Questions

  • E535 high battery drain when the laptop is turned off

    Hello

    I just bought a Thinkpad e535 and I have a very annoying problem:

    Whenever I have turn off the laptop (not not hibernating, not to sleep) and unplug the power cable from the power outlet the battery loses about 20% of charge every 24 hours.

    What I have done to solve the problems:

    -Always on disabled USB in the BIOS

    -Disabled Wake On Lan in Windows AND BIOS

    -Run the powercfg /devicequery wake_armed command to see if any device is programmed to turn on the laptop

    BIOS version is a later (2.08)

    Software Power Manager is 6.32

    Any help will be greatly appreciated


  • Battery drain incredible during the eve logged onto a windows Tablet 8 clovertrail

    I do the exasperating experience draining the battery during 'connected' on a windows Tablet 8, Samsung Smart PC 500 T. I bought it 2.5 months ago, the problem has been for more than a month, after a few big OS against MS updates... I tried to diagnose any way I can, but this it it, thank you, not interested by this day before thing all connected, will no longer be a Guinea pig. I want to just turn it off.
    -How to disable connected standby mode? Don't tell me 'it is part of the windows experience' blah blah 'experience' is half cooked so far... (to put it very diplomatically). I want to close standby connected, completely - and use the sleep windows 7-style good, old, normal. Is there a service, the registry key, all I can do to disable the standby connected?
    Connected standby mode, I've got battery drain with flight mode, no user apps open (anything that can be taken out of service - shutted down), most apps metro removed, only 4 left (metro IE10, Windows Store, music, Photos, S-camera), no nfc, no bluetooth, no usb, no keyboard accessories don't dock, all the stuff from Task Scheduler not only not allowed out the computer , but disabled at all, no auto sync anything in widndows 8 (not sync tiles, tips of user account, no email push in outlook 2013), no auto updates of OS, whatever it is (except for samsung s-implementation to date clean service - weather, it was long before and it has not caused any problems) anytvirus, disabled windows Defender...
    Nothing interesting in the event viewer, with which it is related to food filtered logs of the system...
    I mean, the man... What the...? ! How to find that something that drains my battery? I was watching cycles cpu (Task Manager and ProcessExplorer) and it is not conclusive, the most programs is OS stuff... some "material interruptions and DMCs, but not nearly enough to cause this brain drain...
    I suspect drivers wifi a little... some weird newspapers I saw in the viewer the same... But I won't standby connected . WiFi off. I even checked, I disabled the wifi driver in Device Manager and on the standby battery drain connected yet,
    Yes, I updated everywhere. I would even say updated too much em... It works well in advance.
    Some powercfg - batteryreport (s) in the links below. Well Yes, played with powercfg /waketimers, power of Device Manager and parameters of wake, powercfg /devicequery wake_armed (everything is turned off, nothing here awhile loong) and powercfg-query. Clean.
    On these photos of powercfg - batteryreport, the columns are date/type of activity/lasted for how long/battery drain in %/battery drain in mWH. Which suggests you take a look at the last. That's a record... of 18% in 4 hours battery drain. "Sleeping."
    The Tablet is lying on my desk, just sitting there, doing so I have no idea what, and 4 hours more later boom, where all this battery juice went?
    ! I have a problem with the windows start button, it fires in my bag accidentally when I wear the autour tablet, but that's a separate problem how disable this button windows at home. The backup battery drain is a different thing.
    Much more serious.
    So:
    QUESTION 1:
    -How to disable this thing crappy connected standby that drains my battery and makes me crazy?
    QUESTION 2:
    s ' it is not possible to disable directly, how to go around that? I don't have a button for this. Saying what to do with the windows registry is good enough.
    QUESTION 3:
    -If connected standby cannot be disabled in some way - how to diagnose what app/process uses cycles cpu, battery juice? I've been everywhere ProcessExplorer and observer of events, but maybe you know something I don't know...
    And please spare me the clean boot suggestions, when I go back to the 'normal' State I have a ton of bloatware I don't need running with the OS... There is a reason why a little more savvy people use these things as services.msc. Bloating! No, I didn't touch the system services... Yes I know it can cause a ton of problems, it is not.
    I do not need a clean boot, I need a way which device in the Device Manager uses so much power, which driver, what app, what service, what is the process, this thread, where it has located in the file system, when he was active, how many cycles on the CPU, it has obtained since then...
    And if MS doesn't already have this app in windows, it should be a cause of issues of power on windows tablets 8 of clovertrail are... plague. For example - this is exactly the problem (a similar review victory 8 connected tablet with the same question shall) here - http://www.umpcportal.com/2013/02/connected-standby-battery-life-problem/
    When even comments from bloggers and tech write about it, you know that there is something in it.
    But I guess that applications like freshpaint stupid finger paint are more important as a selling point.

    Just to let you know all I found the registry key to disable the standby connected. So you can all stop rage and take a sigh of relief.

    Reach:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power. There is a DWORD value called "CsEnabled" that you should find the value 1 and change to 0 will turn standby connected power off.

    I have a Surface Pro 3 and can confirm that since making the change in my battery life has improved considerably. Also on the battery meter, before he just showed the remaining percentage, but now it shows the time remaining (for example 8 hours, 30 minutes) as well.

    The only drawback to it is when I close the type of cover and re - open, the logo (logo windows normally blue) surface appears and performs the old style wake up from its sleep. Of course this should not be a problem for some of you so as most laptops normally do...

    Already when I opened the hood, the screen will come back and I'll be back at my desk (or metro app, no matter what either was last opened) just like before - similar to press the lock and turned off on an iPad, tablet or by phone.

    I hope this helps all the world all that. Please like and mark as solution if it solves your problem :D

  • battery drain huge Omni 10 mode standby

    Hello

    I have a tablet of omni 10 Hp with Windows 8.1 for almost a week now. It s works well after I did all windows, drivers and bios updates, but the battery is drained quickly when I put it in sleep mode. When I left it over the weekend, the battery got completely discharged. Today, she has lost about 10% autonomy of 10 h 30 min.

    It surprises me, because I thought that the InstantOn technology would be more energy efficient.

    It s solutions possess a device that spill into the next few days without using it. What can I do to improve the life of the battery in standby mode?

    mrkkayy

    Try diabling the connected standby function, even if this is not desirable and the sleep feature will be lost.

    Reach:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power. There is a DWORD value called "CsEnabled" that you should find the value 1 and change to 0 will turn standby connected power off.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/incredible-battery-drain-during-connected-standby/92de7544-4514-40E8-B11D-3e18537f3de3?auth=1

  • high-capacity HP TES 15uo11dx battery drains quickly

    Currently, I bought a hp envy 15uo11dx on ebay and I find that drains battery in less than 2 hours even thought there is a mAh 3820 is this normal can someone help I might just have to return it I don't like it at all I only surf the internet and I find that I plugged the computer if often to cause the battery drains every 2 hours

    I did everything as stated did a test of the battery and that pass, I know it's a 3 cell battery as I bought it just like 5 days ago, I don't think the battery is ruined in so little time, I have no apps running in the background is already me powersaving mode

  • BlackBerry Smartphones battery drain with High CPU (v6.0 Bundle 3049) because of the net.rim.io.impl module

    Hello

    .

    I have improved my Torch (9800) a week ago and have been noticiing battery drain issues.  The problem is NOT persistent, but is most of the time that goes well.  I am currently on OS v6.0 bundle 3049 (v6.0.0.706, Devils 6.6.0.246).  My Wifi and Bluetooth are always TURNED off.  Only by using the Bell network, for which I have all 5 bars available.

    .

    I investigated further and found that the Blackberry system software was running with more than the processor - usually in the 1970s high, 90 same high.  And this corresponded over the hours until the battery was dead.  I have since deleted all the apps I have suspecpected - such as the Office of Nice and LinkedIn.  But the problem persists.

    .

    Battery pull was made several times, as I checked and there is no update of the OS.

    .

    Now, currently, only the Basic apps are loaded (Alt-Back): home, BBM, phone, Messages, Borwser.  All other applications are closed or exit.

    .

    Further study in the modules of the system software of BB, I found that the net_rim_io_impl, is her consuming ALL the CPU.  I don't know where/what this module does - so I'm not clear on this service within the BB I can disable (OFF) to get rid of the issue.

    .

    Please see the following screenshots, the CPU for the system a little, drops as Options use a part, otherwise it goes back 90 years, if left alone: -.

    And in the system software of BB: -.

    .

    Please help and guide, with either a fix to the module, or via a workaround solution, in which some service can be stopped or a setting can be changed to avoid this battery drain.

    .

    Thank you!

    I think it could have been resolved in a second thread.

    http://supportforums.BlackBerry.com/T5/BlackBerry-torch/pls-help-100-high-CPU-utilization-V6-0-bundl...

  • BlackBerry Z30 battery draining high after update 10.3.2.2474

    The battery drains quickly after the 10.3.2.2474 update.  The monitor of the device shows that it is the standby process that uses between 25% and 40% of the battery.  This process uses a good amount of CPU.  I tried to restart the unit a couple of times to see if that solves it, but it doesn't.

    Is there a fix or the means to return to the previous version of the OS?  I can't even make at 15:00 without having to recharge my phone.  So much for the famous BlackBerry battery life...

    It does not allow that BlackBerry charger provided with the new phone is only 850mA and the phone does not recognize as a BlackBerry charger (aka, it takes a long time to load in the middle of the day, when it is low).

    Bob

    I have confirmed that the problem disappears when it is not connected to the TLS - based EAP wifi connection.

    I am currently in direct contact with the support of BB.

    Bob

  • BlackBerry, BlackBerry Z10 Z10 - battery drains very quickly even in sleep mode

    My BlackBerry Z10, model number: STL100-1 v10.3.1.1565 of running operating system is suddenly cause battery drain issues. Earlier it used to happen very often that the battery begins to elapse without reason to a very fast pace, say, 100% to 20% in 2 hours standby.
    From last 3-4 days, which happens all the time, I'm charging my Z10 to 100% and the battert runs in an hour or two with the phone gets hot as hell. Seriously, the temperature of the phone rises as it is boiling. It wasn't even a year and I am facing this problem. I was never tired of BlackBerry despite its app support deficiency compared to Android and iOS smartphoned but now I want to throw the phone in the river.

    What Android apps you have installed?

    Try first, do a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

    Look at your device sometime and see how it goes.

  • BlackBerry Smartphones Blackberry 9810 battery drains in mode 'sleep'.

    Hello to all of you guys, I have a problem with my blackberry torch 9810.

    If you please, look at the screenshots of the Blackberry device Analyzer and recommend me, why the battery drains so fast. I bought a used e - bay. The software version is the last: Bundle 2807 7.1. I have a stable discharge to 4 percent at the time. It's normal rate? Please, help, comrades.

    http://S020.Radikal.ru/i705/1407/39/5d2c52aa8532.jpg
    http://s018.Radikal.ru/I501/1407/Fe/2978cbbe8f6c.jpg
    http://S003.Radikal.ru/i202/1407/4E/b42fed6111c0.jpg
    http://S019.Radikal.ru/i634/1407/EC/6530ad374cef.jpg
    http://S019.Radikal.ru/i637/1407/4F/f76fa015bd5b.jpg

    I don't think that there is nothing wrong with your device.

  • Solution of as influenced by identityservices battery Drain / Messages

    iOS9 battery draining - in regards to the identityservices and Messages - affects IPhone, look at and OS X Devices

    Some people have problems with the battery drain on their iOS devices. We have two sets of iPhone (each a 6s +) / Watch combinations - each running the latest versions - 9.3.1 and 2.2 respectively. On watchmaking and the iPhone battery drain has been noticed about five days after the release of the 9.3.1. I took the devices in the genius bar - they have worked on them for three hours - have many things to watch - restored like new. They also have to reset all the settings on the IPhone - all to nothing does not. Both devices had abnormal battery drain. They agreed to leave the ticket open for problems not solved.

    I found a post that suggested the signing of all services. I tried on the first combination of iPhone and watch. It seemed clear the issue. I tried it a day later on the second phone - battery drain still very badly on the second set - it did not work. Tests showed that the watch itself (corresponding iPhone not tuned on) not not drain - drain you only while the iPhone is in. And the iPhone itself drained.

    Next step: I ran Xcode instruments on iPhone still questions. I ran the monitor of activity several times for different periods. Run the latest showed the system task: identityservices consuming more than 5 HOURS CPU time in a period of 9 hours sleep. Safe to say that the task system was draining the battery. The iOS log lists the iPhone that task in the form of your CPU time excessive - and that the thread, the cause is linked to a message store. I did more research and found that this system task seems to have created problems of battery in another version of the IOS too.

    I also found that the OS X version of this task (identityservicesd) created a countless number of error messages in the console log on two of our OS X devices (iMac and MacBook). He also ran the battery down on the laptop - quickly. Weapons of this information I instrumented again iPhone. I started to stop every iOS device - (two iPhones and two iPads) one by one - when three of these aircraft have been closed the identityservices task fell to minimal use of CPU - is no longer than 50-90-105%. In addition the corresponding task on the OS X iMac and MacBook stopped spitting out error messages.

    I rebooted each iOS a device once they have been fully charged. The task of "runaway" system (identityservices) is back to very low use. On the iPhones battery life now - after being in mode standby for five hours - very low consumption 'use '. Not doing much with phones as five hours. Previously, its use was almost equal to the wait time - it was a low ratio. Now, it's an a very high ratio - about a 1 to 10. For those who like % - after five hours, it is 97%.

    Regard to watches - we turn those and soon back on IPhones and see how they do. I'll post a report on those later in the day.

    UPDATE: watches are now running to the normal battery level.

    Error messages identityservicesd on OS X machines indicated that the error was associated with a particular 'ID of Machine' (not the same as the serial number appearing on). I'll see if I can track this number down to a specific device. I don't know how to find the Machine ID on the devices iOS - or watches also. Perhaps one of the devices was a problem - most likely turn off all devices and caches of posts offset by a reboot.

    I think that some people may have the same problem - but perhaps do not realize it because they are used for a certain battery life level - or maybe they don't have it not as bad. In any case, I don't think that this particular system should continue to work and consume high CPU when there is a problem.

    I hope this note helps people who seem to have battery problems. This isn't for everyone - I consider the following to determine if she could help.

    • Check your iOS log (settings |) Privacy | Diagnostics & use) for an entry that starts with: ExcResource_identityservicesd-2016-MM-DD...
    • If you have one or more of the above - the chances are that this may help you
    • Turning off all IOS devices (and maybe your OS X devices too - not sure if this is necessary) and feed them back on one by one.
    • Simple - for us it was very efficient
    • My concern - this can happen again if the tasks system is not changed.

    My plan is to submit a bug report to Apple to document this behavior as son

    For reference, here is an example of messages that have been continuously (~ 5/s) being produced in the log of OS X console during periods of exhausting high battery.

    APR 17 20:31:20 identityservicesd XXX - MBP [288]: [warning] received the message ID is empty, does not produce B4DAF3C4-515F-477B-943F-6CF3B92643BB com.apple.private.alloy.thumper.keys
    APR 17 20:31:20 identityservicesd XXX - MBP [288]: [warning] No. broadcast you want to order 227 subject com.apple.private.alloy.thumper.keys - delete message with the B4DAF3C4-515F-477B-943F-6CF3B92643BB guid
    APR 17 20:31:41 identityservicesd XXX - MBP [288]: [warning] received the message ID is empty, does not produce 9542E416-5CC5-4377-B3D6-BB1444BD7FBC com.apple.private.alloy.thumper.keys
    APR 17 20:31:41 identityservicesd XXX - MBP [288]: [warning] No. broadcast you want to order 227 subject com.apple.private.alloy.thumper.keys - deleting message with guid 9542E416-5CC5-4377-B3D6-BB1444BD7FBC
    APR 17 20:31:41 identityservicesd XXX - MBP [288]: [warning] received the message ID is empty, does not produce F9CE360D-9705-4DE6-8E5C-EBB930BCD62D com.apple.private.alloy.thumper.keys
    APR 17 20:31:41 identityservicesd XXX - MBP [288]: [warning] No. broadcast you want to order 227 subject com.apple.private.alloy.thumper.keys - delete message with the F9CE360D-9705-4DE6-8E5C-EBB930BCD62D guid

    I have this same problem on my iPhone running iOS 9.3.1 6. I have not noticed any additional drain on my Apple Watch if. My iPhone battery life was fine before today where he went from 100% to 0% after having not used 8 1/2 hours. The only thing I did differently from any other day, it's Add airtime to my phone (I use Tracfone prepaid service). But this type of battery drain is not never happened before.

    It doesn't look like my iPad 2 Air, MBPr 2014, and iMac 2013 (all updates running) seem to have no effect on my iPhone (and vice versa). My Apple Watch seems to have an effect minor on it, where the identityservices process will draw upward when the watch is connected at the start and then things will calm down back with occasional changes, but nothing drastic or "abnormal" (compared to the iPad).

    One thing I noticed is that my old Apple devices (a 2009 iMac and a MacBook Pro 2008) send the process identityservices on my iPhone skyrocket as soon as they are turned on and connected to the wifi, and then once they are off the process comes back down. And with the iPhone locked, connected to Wifi with Bluetooth, when you are connected to the activity of Instruments monitor. Turn my iPhone market again (several times) has not changed anything. Even after the phone is dead earlier battery drain is always the same.

    Thanks for all your advice! I'll try and see if I can get it working again "normal."

    I'll also try to restore my iPhone and set up as nine (do not restore backup) since I restored recently to go to a backup and thought he could have problems with the backup that I restored from the phone display incorrect numbers for the size of the backups and what was actually be saved. I will update this post to see if things change after restoring my iPhone.

  • Satellite A200 - 1 H 2-1 hour battery drains

    Hello

    I bought a new Toshiba Satellite A200 - 1 H 2 2-3 weeks. Sound obtained by T5440 Core3Duo, 2 GB of RAM, ATI Mobility Radeon HD2600GT 256 dedicated (up to 1025 with turbomemory).
    I am aware that I got a fairly good CPU and GPU and they cost power.

    But is this normal when POWER safe mode on my battery drains completely in a little more than 1 hour?

    Elwin

    Hello

    Battery working time depends on the use of the laptop!
    But as far as I know the A200 runs approximately 1.15 hours on battery

    In addition, the laptop came with a standard battery.
    If you need more power, you should buy a stronger battery with 6000mAh or higher.

  • Battery drains after put 10.0.2 update

    Since the update of my iPhone last night (10/01/16) my battery drains very quickly. Do not have this problem before the update.  All the patches?

    Greetings Willie9100,

    Thank you for using communities of Apple Support.

    I see that since the update your iPhone last night 10.0.2, your battery empty very quickly. You don't have this problem before the update. I can imagine trying to stop draining your battery. I'm happy to help you with this.

    Please take a look to maximize the life of the battery and battery life and display battery usage information and to see what proportion of your battery used by each application, specifically, this section:

    View the battery information

    iOS 9 is designed to be the most efficient battery iOS ever. And it gives more specific ways to manage your device's battery life, because you can see the proportion of your battery used by each application (unless the unit is being charged). To view your usage, go to settings > battery.

    There are messages that you can see below the applications you use:

    Background activity. This indicates that the battery has been used by the application while he was in the background - in other words, while you were using another application.

    • To improve the battery life, you can disable the feature that allows applications to background refresh. Go to settings > general > background App refresh and turn the switch to Off.
    • If the Mail app lists substantive activities, you can choose to manually recover data or increase the recovery interval. Go to settings > Mail, Contacts, calendar > retrieve new data.

    Location and the location of the background. This indicates that the app uses location-based services.

    • You can optimize your battery life by disabling the location Services for the tour app in settings > privacy > location Services.
    • In location Services, you can see each app listed with his permission setting. Applications having recently used location-based services have an indicator next to the on/off switch.

    Home & lock screen. This indicates that the home screen or the lock screen has been posted on your device. For example, the display was awakened by pressing the Home button or by a notification.

    • If an application frequently wake up your display with notifications, you can disable push notifications for the app in settings > Notifications. Push App and set allow Notifications to Off.

    No cell phone coverage and low Signal. This means that either you are in a poor cellular coverage area and your iOS device is looking for a better signal or that you used your device in conditions of weak signal, which is reached in your battery life.

    • You can optimize your battery life by turning on airplane mode. Drag up to open Control Center and press airplane mode icon. Note that you can not make or receive calls in flight mode.

    Let us know if that helps.

    Have a wonderful day!

  • Messages of the 10.0.2 iOS app question (heavy battery drain!)

    Hello

    I noticed a problem with the Messages app iOS 10.0.2. Since the update, this app is highly draining the battery...

    for the English people (10 minutes on screen, 5, bottom of 5 h;).

    I do not use Message as well!

    Is there a work around for this problem? I've lost 30% of battery in 2 hours on an iPhone 7 +.

    Stone

    Hi pierrezep,

    Thanks for the update to iOS 10.02! I understand that after the update your Messages application uses a very high amount of your battery. You can try to force quit the Messages app and relaunch.  Force a nearby application on your iPhone, iPad or iPod touch

    If this does not resolve the problem, try the advice contained in this link to maximize the life of your iPhone's battery. Maximize the life and the life of the battery

    This should solve your problems for sure battery drain! Please use the Apple Support communities to post your question.

    Have a great day.

  • Battery drains too fast

    Hello

    After the transition to macOS Sierra, I see that my macbook pro battery drains too quickly. Also pointed out that in the mode 'sleep', he gets very hot. Any suggestion to solve this problem?

    I have a s 6 + 6 oversized Apple. Half of my strings and do not plug ins will no work with this phone. Everything becomes hot/warm/hot. Does anyone have this problem.

    My phone is locked also up for ALL THE TIME especially when I try to use the contacts.

    Now, even though I rarely use chrome, I went in tonight and this company - Loginemailnow.com trying to download their software. I went into the Apple applications, and they say they do not know. Supposedly, it turns out emails in format doc. It seems that you will allow them to get into your computer and I've made this mistake before and I still don't want to do this again. If anyone can help me with any of these problems = I would appreciate it a lot.

  • Watch the battery draining quickly from ios3 in update

    Since the new watch iOS 3 update on my Apple Watch, my battery drains very quickly.  I don't have a lot of notifications, I've changed my face color to be just white, my activity level is the same as what it was before the update (30 minutes of work per day - using my watch).  More tips on preserving my battery?

    I have the same problem. I noticed in the usage statistics, it seems that the watch is not going into standby mode when the screen is off. I don't understand how to solve this problem yet. My guess is that it will be a software update to fix it.

Maybe you are looking for

  • Designjet HP T2300: T2300 no magenta

    Magenta fades gradually in printing. After reset and aligning the printheads magenta appear for one or two runs then fades. Same thing happens when copying and printing.I tried 2 new printheads without result. New inks as well.Magenta appears on the

  • New rig of the shoulder

    After months of circling solutions shelf that I cooked up this platform balanced shoulder that puts the balance point in the middle where it belongs. I have the top plate Berkey and he returned so the viewfinder is mounted correctly. The base is the

  • HP - Pavilion (15-f010dx): HP Pavilion f010dx 15 - module WLAN and battery upgrade options

    Hello I recently bought the HP Pavilion 15-f010dx and let me know if I am able to upgrade the WLAN module that has bluetooth? If it is possible, what drivers I need? This laptop came with a battery 3 cells. Are there options for a 4 cell? I appreciat

  • Adding a new MBR on the drive where is installed Vista Ultimate

    My computer has the following configuration.   (.. .and works very well!) = Player disc-1 =.* (Vista Boot Manager)* XP (C :)) = Player disc-2 =.* Vista Ultimate (e :)) (when I installed Vista, he installed BOOTMGR to drive hard-1)) My question/proble

  • Find and replace all occurrences of a string within the current paragraph.

    I did so much work, and it's my last method to implement.I want to get the current active doc the current paragraph and replace all occurrences of a string inside this paragraph with another string.For example, say I have the following paragraph in a