in my device it says 'no device.'  What should I do?

Similar Questions

• I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  Hello

  I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.

  http://support.Microsoft.com/kb/310575

• When writing to my administrator password it says has expired, what should I do?

  I have a Hp G60 when I immediately I can't connect to the internet, because his request a password for the connection in the network. But, when I try to log into my password it says timed out.

  Hello

  1. what operating system do you use?

  2. do you use the domain network?

  3. have you made changes on your computer?

  I suggest you follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• at the end of the installation of creativecloud, the message says "pending". What should I do to make it finish installing?

  I installed creative cloud. However, the message it says now "waiting." what can I do to complete the installation?

  Hi Thomas,

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• "This copy of Windows is not genuine" that's what says my computer, what should I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi ose431,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. What is the version of Windows installed on the computer?

  Usually, this would happen if the copy of Windows is not activated.

  I suggest that you check and activate the copy of Windows.

  Activating Windows: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  Description of the behavior of reduced functionality in Windows Vista mode

  http://support.Microsoft.com/kb/925582

  Error message when you try to activate Windows Vista: "an error has occurred."

  http://support.Microsoft.com/kb/931276

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I had sound earlier, had a power failure double system is back but no sound, saying: "no audio output device".What can I do?

  No sound

  I had sound earlier, had a power failure dual system is back, but no noise saying NO AUDIO OUTPUT DEVICE.what can I do?

  Hi DocBecker,

  What operating system is installed on the computer?

  I suggest you try the steps from the following link:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• I get a msg saying windows media player cannot delete a file from the device. What should I do?

  I put an album on my sansa fuse. The synchronization process has not finished now correctly the album does not work on my mp3 player. I tried to remove it so that I can re sync and im getting this msg saying "windows media player cannot delete a file from the device." I also tried to delete the album directly from the mp3 player and it does not always remove. What should I do?

  Hi danat4489,

  You can follow the steps described in the article below and then check if it makes a difference

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

• I recently had to re - install Windows XP on my computer and lost all my stored programs. Now my speakers do not work. The control panel says no audio device. What should I do to recover my audio? None

  My audio does not work. It worked before I re-install Windows XP. What should I do? I'm supposed to have an audio installation disc? I'm new on the technical aspect of computers, so I know only the basics?

  Using the Device Manager is a good way to get the drivers, but if you do a clean install on a computer or laptop, you must download the supplied drivers initially installed on the computer or laptop to the manufacturer. that is, if you have a Dell, then go to the Dell website.
  the site Web of HP/Compaq
  the Site of Asus
  Acer site
  Alienware website (Now owned by Dell)
  eMachines Web site
  IBM Web site
  Sony Web site
  Toshiba Web site

  Have I no all the em? Anyway, if you have a driver supplied with the computer disc, use this cuz he'll have original manufacturer drivers and the software that you get on the website anyway.
  Also, if it's a Dell, you would like to have a look and print their Instructions on how to install the drivers, Dell cuz drivers must be installed in a specific order.
  Good luck.

• When I open the Device Manager there is no ' sound, video...» "in the menu. What should I do for intal vista audio output device?

  My computer says "no audio output device is installed" when I open the Device Manager there is no 'sound, video game... ". "in the menu. What should I do to get a new installed audio device?

  Stan

  Hello

  
  1. What is the brand and model of the computer?
  2 did you and changes before the show?
   
  Method 1:
   
  I suggest you open recognition of the device by using Device Manager.
  
  (a) click Start and type Devmgmt.msc, and then Enter. The Device Manager window opens.
   
  (b) click on your computer as the location for the scan.
   
  (c) on the Action menu, click Scan for hardware changes.
   
  (d) to close the Device Manager window, and then restart the computer.

  Method 2:
  You can try to download and install the latest drivers for the sound from manufacturing sites and check.
  Check out the following link.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3:
  You can see the following link.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
   
  For reference:
  
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  Sound cards: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/sound-cards-frequently-asked-questions
  It will be useful.

• Why is it not my DVD drive appears in my computer folder, but it appears in Device Manager, what should I do?

  I have a windows vista. The DVD player has been working great until today, I used yesterday for 2 CDs rip. When I turned it to play a song from a CD but autoplay ever came I went to the tab of the computer in the start menu and my DVD Player wasn't there! I went to the manitger of the device and he was there with a sign of cation on it. I click on it and the device status says "windows cannot load the diver of this hardware device. The diver may be damaged or missing. (code 39)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is solution available. "but I do not have Internet so what should I do?

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• How can I connect to my firefox sync account? When I press 'Sign in', it shows me a security code, what should I input on another device, but I need to synchronize this device.

  When I press 'Sign in', it shows me a security code, what should I input on another device, but I need to synchronize this device.

  I also had this problem until I deleted my sync account in the site and created again.

• Does not see the utility Airport Airport Extreme or any other device in the House on the network. However, all devices are getting internet.  Backups on external hard drive are going wireless, too. Yosemite day and other software. What should do?

  Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?

  What should do?

  All you can do is to try to circumvent some of the bugs crawl into El Capitan.

  Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...

  Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want

  Wait a minute

  Turn on the modem first and let it run by itself for 2-3 minutes

  Then, switch on the device connected to the modem and leaves turn a good minute

  Keep power devices one at a time about a minute out until the entire network is back

  Recheck the AirPort Utility

  If still no luck, we will have to try some repellent on Mac.

• hardware device: what is the code 43?

  hardware device: what is the code 43?

  Hi Timothy,.

  Thanks for posting the question in the Microsoft Community!

  According to the description provided, looks like you want to know the description of error code 43.

  However, we need more information about the issue to help you better. Please help me to answer these questions.

  1. what operating system do you use?

  2. when exactly you get this error?

  3. were there any changes made to the computer before the question?

  Visit this link for the operating system you are using.

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  This problem occurs when an engine control unit notified the operating system that the device has failed in some way.

  Visit this link to learn more about Device Manager error codes.

  http://support.Microsoft.com/kb/310123

  Hope this information helps. If you have any questions with Windows do not hesitate to answer and we will be happy to help.

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• Bytemobile kernal Network Provider this device is not present, does not work properly or does not have all its drivers installed. (Code 24) What should I do?

  Kernal Bytemobile network provider: this device is not present, is not working properly or is not all its drivers installed. (Code 24). What should I do about it?

  Hi Arthur,.

   
  You have made any changes to your computer recently?
   
   
  I suggest you to follow the steps and check if it helps.
   
  Method 1: Make a convenience store and check if it helps.
  Open the hardware and devices Troubleshooter
   
   
  Method 2: Updated check and network provider kernal Bytemobile if device driver that can help.
  Updated a hardware driver that is not working properly
   
   
  Method 3: You can check out the link and check if it helps.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
   
   

  Note: This link applies to Windows 7.

• My SRW2008 'falls' the link to other devices, what to do?

  Hello

  I have a SRW2008 who worked without problem for several years. It is installed as the main switch in my local network.

  Recently, I've enabled the jumbo frames, but regretted and he subsequently invalid.

  During the turn it off, I was asked to click on a webview restart button to restart the switch, which unfortunately resulted in an infinite loop.

  I found a fix online and made as described, connected using serial connection and deleted a file 'config '. Now the button started again.

  Devices, however, do not know if this is a result of resetting, but now the switch removes the link to.

  Usually less than an hour, I can't any traffic through the switch, at least on some ports. If I can still access it on wearing my workstation, I can simply open the Web display, disable the port, on which, I want to connect (out) and and turn it back on. That's all working again. Same result if I unplug the unit on the outgoing port and plug it back. It is simply not acceptable to do 10 times a day.

  The device, which is generally "disconnected" is a ReadyNas NVX. I've seen the same behavior for my workstation-map port switch 5 which is also connected to the SRW2008. The link lights simply turns off on my 5 switch ports, and I have to unplug it and re - plug for a link again.

  It could be a problem caused by delays due to no traffic, or may be related to resetting the config, I have no idea.

  What should I do from here?

  See you soon,.

  -Michael

  Hi ml_cisco_support

  Maybe a long shot and my calleagues may disagree.

  I love the SRW2008, I use a SRW2008P in my applications and would not lose the use of it.

  It might be interesting to perform a software upgrade even with the version currently available code, just to update the operating system in flash memory.

  Then, perform a factory reset to initialize the configuration and records.

  It might be a waste of time, or it might not.  My thoughts are that something got corrupted which can happen to flash memory.

  Just a thought.

  Best regards, Dave