in my images, try to add the new folder without result
I'm doing a new folder in my pictures by pressing the "new folder" button nothing happens
See this thread and respond to Bruce Hagen.
Tags: Windows
Similar Questions
-
I was cleaning some ad/bad/spyware on the computer of a friend. It runs XP Media Center 2005. When I restarted it, it wanted a password. He put never, ever. The only work around was to reinstall XP without deleting any of his files (more than 8000 music files) because it is not anything save. I put the new XP in a different folder, I named. After searching around, all of his stuff is there and I can access, but this new folder is take a LOT of resources/mem. There is almost nothing in this record, I can delete the new folder without compromising each other, installation? I think I would need to get rid of mode safe mode with command prompt. I did it so many times, but it's never happened to me. Help!
Once you get the drive installed, simply use xcopy or Robocopy to copy the files, with a fairly large music 8000 drop these command-line utility will be faster than to try to copy them through the Windows Explorer GUI. Xcopy is integrated with Windows XP, Robocopy is available for download from Microsoft.
John
-
Could not add the new folder to a new Library_Windows 7
I get a dialog box that shows the following notification (see below) whenever I try to add a folder to the new library in Windows 7. I tried to get to a point where the notification is not display and add a folder to the newly created library but I am unable to.
Dialog box:C:\Users\my name\Documents\ Embroidery\New Classes_Digitized adorable folder refers to a location that is unavailable. It could be on a hard drive on this computer... could have been moved to a different location.This new library is not related to the classes cunning. I create a library of classes adorable some time ago and added a new folder. I don't have to use the library and so I removed it. Probably not the right way to remove a library and thus the reason for the problem earlier. Any advice would be much appreciated.CarolCarol
See if my answer in this previous thread helps.
-
Try to add the new user account
I had three user account and I deleted an a TI won't let me add more. I can use my guest account annd. He wants to let me log in if I do createpne
Hello
Are you logged on as ADMINISTRATOR? If so the account could be damaged.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).----------------------------------------
Or use the hidden ADMINISTRATOR account:
BE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Hello
I try to add the new provider (HP P2000 G3 MSA FC) storage for VMware vSphere Web Client 6, then these steps vSphere 6.0 Documentation Center
What is the "URL" or where I can find it? I used http://192.168.190.30/ which is the web storage console IP, but get error "the specified provider URL is not valid.
TIA
Hello
VASA Provider URL is accessible via HP OneView plugin for VMware vCenter...
See details in the section "Support of VASA" on page 37 of this white paper from HP to address official:
http://WWW8.HP.com/h20195/v2/getpdf.aspx/4AA1-0290ENW.PDF?ver=8.0
-
Add the new SCSI controller and new drive - powershell SDK
Hi all
I'm trying to add the new disc of paravirtual to my VMs. There are two types of virtual machines in the environment; a Paravirtual controller attached and others are without controller; so my task is to set the new drive of paravitual using powershell SDK.
So far I am successful with my code if the controller is already present but the script fails when I try to attach the controller. with the error.
RecommendDatastores: The method call failed because [System.Object []] contains a method named "RecommendDatastores".
C:\NodeDeployment\Inprogress\Add_newPVScsiDisk.ps1:111 tank: 44
+ $generatedkey = $SRM. RecommendDatastores < < < < ($storageSpec)
+ CategoryInfo: InvalidOperation: (RecommendDatastores:String)], RuntimeException
+ FullyQualifiedErrorId: MethodNotFound
I know that this script is not good enough to post here because it is an initial draft, but in the script attached please help me with the present part-
The Script requires a csv with VMname entry; Disksize to be attached and store cluster data
else { Write-Host "Paravirtualized SCSI Controller Not Found in $vmname.. Trying to add new scsi controller and additional Hard-disk..." $NewSCSIDevice = New-Object VMware.Vim.VirtualDeviceConfigSpec $NewSCSIDevice.operation = "add" $NewSCSIDevice.device = New-Object VMware.Vim.ParaVirtualSCSIController $NewSCSIDevice.device.key = -222 $NewSCSIDevice.device.busNumber = ($allScSiController.BusNumber.Count) $NewSCSIDevice.device.sharedBus = "noSharing" $NewDiskDevice.device.controllerKey = -222 $NewDiskDevice.device.unitNumber = 0 $NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024)) $storageSpec.configSpec.deviceChange += $NewDiskDevice $storageSpec.configSpec.deviceChange += $NewSCSIDevice $generatedkey = $SRM.RecommendDatastores($storageSpec) $key = $generatedkey.Recommendations[0].Key $SRM.ApplyStorageDrsRecommendation_Task($key) }OK I have it myself; I guess busnumber was the problem. He converted to INT working like charm...
Now, I have to work with storage Drs IE. with the ReconfigureVM_task method. hoping that will work also...
else {}
[int] $busnumber = $allScSiController.Count
Write-Host "paravirtualized SCSI Controller not found in $vmname... Try to add the new controller scsi and extra hard drives... »
$NewSCSIDevice = new-Object VMware.Vim.VirtualDeviceConfigSpec
$NewSCSIDevice.operation = 'Add '.
$NewSCSIDevice.device = new-Object VMware.Vim.ParaVirtualSCSIController
$NewSCSIDevice.device.key = - 222
$NewSCSIDevice.device.busNumber = $busnumber
$NewSCSIDevice.device.sharedBus = "noSharing".
$NewDiskDevice.device.controllerKey = - 222
$NewDiskDevice.device.unitNumber = 0
$NewDiskDevice.device.capacityInKB = ($diskSize * (1024 * 1024))
$storageSpec.configSpec.deviceChange += $NewDiskDevice
$storageSpec.configSpec.deviceChange += $NewSCSIDevice
$generatedkey = $SRM. RecommendDatastores ($storageSpec)
$key = $generatedkey. Recommendations [0]. Key
$SRM. ApplyStorageDrsRecommendation_Task ($key)
}
---
Concerning
Sanshis -
Add the new entry name of folder of bookmarks does not
(There's a reason I'm fool the previous thread on this subject, as well as my response to this: I couldn't find a way to add FireFox 10.0.2 to the tags of the thread.) If the thread tags may be edited/added, I wouldn't highlight problems with FireFox 10.0.2 by launching this new thread.)
RE add new bookmarks folder, can not enter the name of the new folder:I am now having this problem with FireFox 10.0.2, 11/03/2012
When I click on add a folder, a new folder appears in the tree view and the folder name field is highlighted for the entry. But when I start to type characters in the field, I can only type 1 or 2 characters at the most seized stops accept input. I then go to the bookmarks menu, locate the new folder, right-click it, click Properties and complete the registration of the name of the folder.
At worst, the folder name field will cease to accept entry as soon as I type the first tank, in which case the name of the folder will remain as "new folder." I find the new folder in the bookmarks menu to change the name, as described above.
It is very annoying because it adds a number of additional steps just to add a new folder in the bookmarks menu. Add the new folder through the "Show all bookmarks" and navigate through the folder hierarchy are an alternative workaround, but that records all the steps.
Any ideas or solutions?
Hi John99,
It has worked well in Mode without failure. Thanks for the suggestion!I'm going offline a bit to understand what add-on, plugin, etc., could be causing it. In the meantime, I have marked your suggestion to use Mode safe as useful so that anyone else coming here could get the clue.
I should probably drop another line in the thread for the guy who in (or has been) using FireFox 7...
I'll post my results if I can understand it.
UPDATE:
I went after any add-on which had nothing to do with bookmarks.
It was the first add-on I tried, SortPlaces 1.9.1 that automatically sorts bookmarks in various ways according to the parameters. When I disabled it, the problem disappeared.
I re-enabled it and checked the options to see if I could understand why she was stop to add the new folder. In the 'Options' tab, there is a time limit for how long interval SortPlaces will wait before you sort a bookmark changed or added. It was set to 3 seconds.
It is not long enough for old men by typing the new name of folder. I put it in 10 seconds. Then, I created a new folder of bookmarks and start typing a name long nonsense, while I looked at the clock. After that 10 seconds it stopped accepting the entrance, right on the mark. What this hidden for me earlier, it was that when he stops to accept input, you don't see the new folder to place in the position of sorting on the menu add a folder. You will see that if you expand the folder later. It's probably why I didn't connect the two.
Anyway, problem solved. I'm leaving the delay to 10 seconds. If I ever need to be longer, I'll just increase it.
Thanks again for the suggestion of Mode safe and enjoy the next season of mud.
Alan Mintaka
-
I have itunes 12.4. When I try to add a new song to icloud music library I see the following message: "Genius results cannot be updated because the iTunes store does not recognize your iTunes library." He then ordered me to turn off Genius, and then turn it back on. There is no option. Othe impossible of access devices correspond to these songs via itunes. Any help would be appreciated.
Hello Subocz E M.
Thank you for using communities of Apple Support. I see that you had problems adding pieces and turn off Genius. I know how it is important to be able to add music to iTunes. I'm happy to help you.
Since you are being invited to turn off Genius, you can add music, please use the following information to resolve these two issues:
Turn on or off the Genius
If iCloud music library is enabled, you cannot disable Genius.
Choose file > library > Genius (toggle Genius).
Turning off the Genius Genius Genius Shuffle shuts and and the Genius Mix.
12 iTunes for Mac: use Shuffle Genius, Genius or Genius Mix playlists
Have an amazing day!
-
What does offline or online when you say: servicing an image Windows 7 to add the new application online? and what is the difference between the online and offline maintenance image
Your question it will be better answered in forum Windows 7 installation and deployment on TechNet:
-
Hi guys, I have a problem with my cc of muse, sometimes I try to add a new widget that I downloaded, but my muse says 'check if a new version of muse is out' what could be the problem because most of the widgets I want to use cant load in my library
Hello
Muse 2014 is actually not the most recent version. Adobe has recently released the Muse of 2015. Your Adobe Creative Cloud application should notify you when new updates are available.
I uninstall Muse 2014 and install Muse 2015 if you have the required hardware and software.
Kind regards
Thomas -
I have purchased Adobe Design Standard CS6 2013 with serial number, but can't find the to no download on a new mac laptop. When I try and add the serial number to 24 digits on my account it doesn't seem to work?
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
I got the new tab next to open tabs button, but with a recent update of Firefox, the tab button disappeared. Went through all the help points, but how do I add the new Help tab is not listed. The only way to open a new tab is manually using the buttons on windows/t or opening the file and choosing the new tab.
Hello
It could be that he is hidden behind another icon. Please try this: right click on the empty space after the last tab and Customize.... With the mini window open, you can move the other toolbars and icons to check if the new tab button is hidden. You can also check inside the mini window customize the icon named new tab or click Restore Default Set that will be hopefully restore back. Please note that if nothing is uninstalled or disabled when you click on restore by default, you will have to redo all changes to manual/personal toolbar.
-
Using script - library locked when you try to add the file to it
Hello
I'm just a simple script that I can run with my engines of the action, so if I add new enum values I can create new wrappers quickly. I am able to create a new VI on disk, but when I try to add the the VI to the library, I get "error 1562: library, or the specified project is locked." Just before adding the article, I tried to adjust the State of the library "Not locked", but has not been the tower.
Directions to see the error:
Open attached zip file
Open 'Engine.lvlib Action '.
Run "Script - Create Wrapper.vi.
Please let me know how to get around this, I thank you,
Gregory
There are two reasons at least a library locks: 1) something he possesses is running, 2) is open in two or more instances of the application. (This applies to classes too.)
I started a project and took your scripts out of the library (to avoid the #1) and then open your Library Reference by path in your script, be sure to include the reference of the application (to avoid the #2).
Works now. (With the exception of the Init.vi but you mentioned earlier that you knew about it. But point 1 and 2 of article work fine.)
-
Add the new Application. 4.0 (4) OF THE IPCC
I try to add two new applications for my express box of the IPCC; Here's what I did.
I created two new applications, said the two new corresponding Scripts and adds an extension JTAPI to each application. In my script of IPCC main that I put it when someone makes a certain selection, it is assumed the pass to the new application JTAPI extensions, updated all scripts and applications. This is not the case. I tested each application manually by calling the associated JTAPI extension and they work. The line that I use in the main script is "redirection of call (- trigger Contact - to"8782"). What Miss me?
If a refresh is not up-to-date, I don't know what to say. Looks like this has not only to take the update. How do download you the new version, check-in directly in the repository or download it via the website? If you did it's a way he try the other. Is it possible this is a variable parameter? You manually set the value of the application page or simply in the script?
First thing I would do, is re - download the thing and then run a responsive script after refreshing everything to make sure that its running the version you just downloaded.
Good luck
Jim
-
I get a "cannot add that email address" when you try to add a new user. I have enough licenses available and was able to add more users later without error. I have 3 email address that returns this error message. I tried to add each several times that produced the error message every time. Connected out of the session and back on and the error message every time.
It is likely that these e-mail addresses already exist in the eSign environment and you are not allowed to add these emails.
Please contact support about it, which can help with that.
Maybe you are looking for
-
Replacing the battery on HP envy 15-j049tx
Is the battery on HP envy 15-j049tx removable? If it's not removable is it replaceable? for how many years the battery will work properly without any problem? http://WWW8.HP.com/in/en/products/laptops/product-detail.html?OID=5448975#! tab features =
-
Noise noisy fan on Satellite L555-12V
Two days ago, I bought L555-12V to MediaMarkt. The fan noise is terribly strong.The fan runs at 70-80% with a CPU load of only 2 or 3%, surfing with firefox and not other open programs. It looks like a hair dryer. It is so strong that you can't stand
-
No software in my new hp audio beats not divided ultrabook
I have new hp split ultrabook 13 r101dx... I formatted by windows 8, once again I format it by windows 8.1... I need software audio beats... How can I get it?
-
Satellite A500 - remote control drivers for Windows 7
Hello world I bought the Satellite A500, very happy with it, but I change the operating system (vista) to the RC of windows 7, it works very well, the only thing is that I can't find the drivers for the remote that came with the laptop. It works quit
-
Hello I need to write a program that reads an Omega Counter DPF940120. I want to read/commuincate using a serial RS-485 connection. I'm not sure if I have to use Modbus for this. Can someone help me? Thank youEbiosa