In preview, the images are projected on the wrong page

Similar Questions

• Why the menu link and hyperlink all go to the wrong page

  Have a site that has been active for a while and was fine when we downloaded and became operational.  Some time after, with subsequent updates to the site, one of the menu buttons goes to the wrong page, no matter what we do.  I tried "include the page without hyperlink" and then used the hyperlink tool to post a link to the page, same result.  Then I deleted the link hyper, tried "include the page without hyperlink" and inserted the link for the appropriate page hard. Same result.

  Also on an other pages, there is a hyperlink which is supposed to go to this page as we cannot return, and THIS hyperlink goes to the wrong page (the page we want to propose is equipment, and what he's constantly going to is the about page.

  I checked for additional boxes (which does not explain why the text on a completely different page link also goes to the wrong page, but check it anyway) and there is no additional text box or whatever it is.

  I think that this must be a glitch of Muse and do not really enjoy the idea of rebuilding the site.

  Please help us to understand what is happening. Site of phone works fine it's just the version of office that is glitching.

  Click here to view the site online.  No matter what page you are on, if you click on "Facilities", it takes you to "About Us" and if you go to the Contact page and click on the text "Amenities" link which will take you to the page about us.  He's allergic to the equipment page.  As I have said, when the site was first direct links menu everything has worked well.  Actively, we test each page.

  I hope someone can help.

  Hi David,

  Thanks for the reply e-mail after receiving our folder.

  We tried your suggestion (which I thought I had tried before, but didn't so I tried again) with the same result.  Still no way to access our facilities page.  Have you checked the preview site, or did you visit the site?  When see us it in the preview (in Muse) then the page is launched, and the menu is as it should be.  But it does not work after uploading on the real site.  Our site of phone works fine, however...

  We're going to look at the server and see if there's some sort of corruption which runs at this level and will post if we find anything.

  Thank you

  Michelle

  * Amended to add that we found a redirect that should not have been in the htaccess, deleted page it and now it works!  Thanks for the time and help Ankush!

  Michelle

• Link goes to the wrong page

  Hello.

  So as of recent, one of the links I have in my footer is now directing to the incorrect page. It goes to a page on the version businesscatalyst of the site.

  There is absolutely no connection with the site of BC, I Redid the link and when I have this link, I select the page directly in the same file and I also tried the direct url and nothing seems to work. It seems to do it through the home page.

  The site is landpotential.org and the link that leads to the wrong page is the one who said 'OUR PARTNERS' at the foot of page and it goes to everything instead.

  I checked the master page, the actual index page and there seems to be nothing to do.

  Help?

  
  

  I have attached a picture showing the 'Our partners' text should be linked to the same page.
  

  
  

  There are two conflicting hypertext links there. The link on the text block moves to the page on your site. On the 'OUR PARTNERS' text range within the text the link points to a page on Business Catalyst. Select the text using the text tool and remove only hyperlink and the hyperlink rest will be whatever you want.

• Link goes to the wrong page, once the site is transferred via ftp

  No matter what I do in Muse, a particular link goes to the wrong page. I tried to rename the page, deletion and recreation of the link, change the text styles, download of the whole of the site several times, you call it.

  When I saw site in the browser the link works correctly. When I upload to the server the link does not work properly.

  Links:

  Home page under menu

  Link under testimony / continue reading, to half way down the page

  Links should go to the testimonials page, but it takes you to the FAQ page.

  I just noticed the link links simply bounces back to the home page.

  Weird.

  Here is the site;

  http://www.bikramyogafitzroy.com.au/

  Hera is the code to continue reading link:

  

  I suspect that the href-data tag is the culprit.

  OK, so I deleted the page with broken links and created a new, deleted the page that the link has gone in and created a new.

  Created a new link in the menu of Muse.

  Tested the site on BusinessCatalyst and it worked.

  Downloaded the site via FTP (all files, not just an update).

  Same problem again.

  Site exported as HTML to my local HD, no problem with the link.

  Very confused.

• CFHTTP returns the wrong page

  A CFHTTP tag began yesterday the wrong page to return. When the page is accessed through a browser, it looks like this: http://www.fosters.com/apps/pbcs.dll/section?category=NEWS26
  
  When the page is captured with CFHTTP, it looks like this http://www.portsmouthnh.com/news/fosters.cfm.
  
  The CF code is very simple:
  "" < cfhttp url = ' http://www.fosters.com/apps/pbcs.dll/section?category=NEWS26 ' method = 'GET' resolveurl = "true" timeout = "35" charset = "Windows-1252" throwonerror = "Yes" >
  < cfset fosters = "#cfhttp.filecontent #" >
  < cfoutput > #fosters # < / cfoutput >
  
  What is happening with this? No changes have been made to her see my site is virtually hosted so I do not know if the server changes were made, I wonder. Generally, the remote site requires registration, but we have an employment contract and this page was fine for months.
  
  What could cause that? TX.
  
  
  

  Apparently, the problem disappeared. I talked to the newspaper which creates the pages, but they had no idea why the problem appears or why he stopped. Another mystery of the computer... TX anyway.

  UPDATE: Oops, spoke to soon. The page noted another source, sort of processing. The page is wrong is always wrong. See
  http://www.portsmouthnh.com/news/test.cfm who theoretically catches http://www.fosters.com/apps/pbcs.dll/section?category=NEWS26

• Whenever I type in the search, the links go to the wrong page

  original title: problem with search

  When I type in my search, the list of items of fine search. When I click on one of the points of view it starts to load and then is redirected to another site like revo, puree of information or another site of sale

  Hello

  We would like to get more information about you to help solve your problem. Please answer the following questions, the better you can

  (a) what you're trying to find?

  (b) you are performing a search using a search engine (toolbars) or directly from the browser?

  (c) this happens with all the search engines or any specific search engine?

  (d) what browser do you use?

  (e) you did any hardware changes or software on your machine before this problem?

  (f) when was the last time it was working fine?

  Method 1:

  If you use toolbars, then try to search directly from the home page by typing the address in the address bar and see if the problem still occurs. If the problem does not persist then I suggest you to uninstall toolbars to add and remove program, because this could cause a problem and then reinstall it from the Web site.

  Method 2: If the search is redirected to different sites, it can be caused by a virus or other malware on the computer.

  Try running a virus online scan and check if it helps:

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

• Duplex printing on letterhead on the wrong Page and backwards!

  Hi all

  I googled this question and it seems that many have the same problem, but none of the solutions seem to work for me!

  I have a LaserJet P2055dn.  In 'tray 3', I have paper with a letterhead on one side.  It is in the status bar with letterhead down and towards the front edge of the printer, which works fine when I print a page.

  However... When I tried to print the pages back to back, it prints pages 1 to the last page, page 2 on the first page, and the two pages are in reverse!

  I realize I could exceed a flip manually the paper in the tray, but I'm evolving as to if I need to single page and pages back to back.

  I made sure the latest driver has been downloaded and installed, and I tried to change the following settings:

  Printing options > advanced > header Alternative Mode 'On '.

  Paper source: plain / header / pre-printed (have tried all)
  Print on both sides: Yes, Flip on

  Is there a way to change the settings so that I don't have to keep exchanging the paper around the status bar?

  See you soon

  Glenn

  With many printers. the 'face' paper must be loaded in the trays in a way for Simplex jobs, but in a different way to work two-sided .

  Some printers offer Alternative letterhead Mode (according to your comments, your printer seems to be one of them), in which case media that are declared with a Type of paper , letterhead can always be loaded in a sense (the necessary way for double-sided work).

  With the work front, the printer then automatically manage switching sides (probably by adding a blank page and print front and back of each front page).

• Login process passes to the wrong page

  Hello
  
  In my application, I changed the page that should be taken to the user after connection of the 1 page to another page. I have updated the login on the login page, 101 process, so that the P_FLOW_PAGE of the wwv_flow_custom_auth_std.login procedure parameter contains the correct page number, instead of ': 1'. However, after a logout and back again, Apex always present page 1.
  
  I've created a demo here application:
  
  http://Apex.Oracle.com/pls/OTN/f?p=46094:101
  
  The login page is defined on page 102. The first time your connection, you are taken to page 102. However, if disconnect you and newspaper insert it again, you are now taken to page 1.
  
  How can I make sure that the user is always taken to the 102 page after login?
  
  Robert

  Hello Robert,.

  OK, I found it (again).

  Within the APEX Application Builder > Application # (number request) > shared components > authentication schemes

  Choose to edit the "schema of current process" and go clear at the bottom of the screen for the logout URL definition: change the item at the end of this chain to be the page number, you want to go, in this case 102... If the string is as follows:

  wwv_flow_custom_auth_std.logout? p_this_flow = & APP_ID. & p_next_flow_page_sess = & APP_ID.: 102

  Good luck
  Don

• Firefox makes the wrong page

  Hello. This page makes it strangely with Firefox. It seems correct in Chrome
  http://support.Apple.com/kb/PH3956

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• On the detail page dynamic image gallery

  I have a page master listing 8 products. I inserted a picture gallery dynamic on the details page that looks ok, but has a major flaw: when you click on a thumbnail for the main picture opens on the wrong page. for example if you click on the page... dragons.php? id = 3 the main image opens on... /dragons.php/ID=1 and shows the following url:.../dragons.php?image=btf.jpg (or whatever the name of the image file).

  I have just started using php and I would appreciate some advice on how to solve this problem.

  The following are the relevant sections of the code?

  $vardragon_dragons_species = "1";
  if (isset($_GET['id'])) {
    $vardragon_dragons_species = $_GET['id'];
  }
  mysql_select_db($database_cjwebsite, $cjwebsite);
  $query_dragons_species = sprintf("SELECT dragons.Order, dragons.family, dragons.Latin, dragons.English, dragons.Img1, dragons.Img2, dragons.Img3, dragons.img4, dragons.Img5, dragons.text, `dragons gallery`.filename, `dragons gallery`.caption, dragons.id, `dragons gallery`.image_id, dragons.id FROM dragons, `dragons gallery` WHERE dragons.id = `dragons gallery`.image_id AND dragons.id=%s", GetSQLValueString($vardragon_dragons_species, "int"));
  $dragons_species = mysql_query($query_dragons_species, $cjwebsite) or die(mysql_error());
  $row_dragons_species = mysql_fetch_assoc($dragons_species);
  $totalRows_dragons_species = mysql_num_rows($dragons_species);
  
  if (isset($_GET['image'])) {
    $mainImage = $_GET['image'];
    }
  else {
    $mainImage = $row_dragons_species['filename']; }
  
  <body>
    
    <div class="main_image"><img src="../images/dragons/<?php echo $mainImage; ?>" alt="<?php echo $row_dragons_species['caption']; ?>" />
    <div class="capt"><?php echo $row_dragons_species['caption']; ?></div>
  
  <ul class="gallery">
          <?php do { 
                    
        if ($row_dragons_species['filename'] == $mainImage) {
                   $row_dragons_species['caption'];
                 }?>
    <li><a href="<?php echo $_SERVER['PHP_SELF'];?>?image=<?php echo $row_dragons_species['filename']; ?>"><img src="../images/dragons/thumbs/<?php echo $row_dragons_species['filename']; ?>" alt="<?php echo $row_dragons_species['caption']; ?>"  /></a></li>
    <?php } while ($row_dragons_species = mysql_fetch_assoc($dragons_species)); ?>
    </ul>
  

  Thank you very much

  CJ

  I think I see what is the problem. If I understand correctly, you get the thumbnails to the right when the page is loaded first from the master page, but not when you click on a thumbnail.

  What is happening now is that $_GET ['id'] is defined when the page reloads after clicking on a thumbnail. Thus, you must add the correct ID in the miniature link like this:

  ?image=&id=">
  

• Overview - but only the current page

  Is it possible to enter the preview of the overlay creator where it jumps immediately to the current page - or even just previews the current page only? For example, there is a modifier key such as Alt/Opt + Preview? If this isn't the case, should not be a?

  For example, I'm working on the last page of a photo-lourds document and I want to get a glimpse just this page that I make changes to an HTML animation or other. Currently I have to wait for the entire document to be delivered and then drag to the bottom. Maybe there will be unexpected results if the rendering could be circumvented, but wouldn't make sense to go automatically to the current page?

  But please, tell me that there is a way.

  John

  No, it's not a way at this time, but this is a good feature request.

• A lot of images. How to select by using the preview window (work area)?

  I have 15 images that I put on a background (picture 16) in the style of a collage.  Each image has an adjustment layer bound to her for me to mix an image manually in the next.  This worked fine, but now I have 15 images with rounded edges and I learned how to change them, I hit a problem, that I wasn't expecting.  My planned process is to move these images in a variety of sizes and positions until I got the look I love.    The only way I could work on that's too painful (scrolling up and down my palette of layer until I find the picture i took for target, select the layer, Ctrl + to highlight in the preview window and then move and size).  With 32 layers, it is very tedious.  It makes more sense for me to select in the preview window (even if it means hitting a hotkey multiple times until I select the picture I want to work with).

  Maybe I approach the task entirely the wrong way.  I'm willing to try any suggestion.  I like to do this kind of project, and I moved to Adobe because I thought that I could take advantage of its extra power to do a better job.

  I am relatively new to PSE 8, but not new for photoediting.  I, are looking for an answer on this forum and the web in general, but can not get close to a solution.  Thanks for your help!

  Edit: Using the technique I describe above, when I move to the work area (what I called window preview), the layer I selected off the coast of the Layer palette has a finely dashed around it, there is another area apparently random, highlighted by a blue line and line dotted yet another seemingly random area highlighted with a heavier white.  These hold the key my solution?

  To make it more clear what I'm trying to do-, here is a brief description of it: the final result is a print for a friend who was a torch for the relay of the Olympic flame to 13 x 19 inches.  I have a map of Canada with the road on this issue and 15 images are pictures of his 15 minutes of nirvana.  I want to fuss around with transparency, size, rotation, each of the images.  I am very happy with the adjustment layer feature (which allows to paint me with transparency).  the rest, I thought would be easy, but...

  Yes, that's the downside of the technique, it's that you need move the brush and gum to get your mask just a clipping mask.

  No way around that.

  As far as being able to see what your paint before painting, make a copy of your image layer and put it at the bottom of your layer stack

  Then, set its opacity to say 75% or so to be semi-transparent.

  Now you can paint on your layer mask to bring your full image. Hide or display the background layer let's you see the result and quickly return the Semitransparent 'outline '.

  See attached screenshot.

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• whenever I try to download or preview and the image, I gives me the message "licensing for this image are no longer available" Why am I doing this?

  whenever I try to download or preview and the image, I gives me the message "licensing for this image are no longer available" Why am I doing this?

  He was going on with all the images. Using chrome, I disconnected and then reconnected and still had the same problem. I have signed in using firefox and had no problem. I bought 3 images of the last week with the help of chrome and downloaded successfully, the problem seems to happen after that. Right now I use firefox for preview images, I can't use chrome. I have not yet tried to make an additional purchase.

• How do I place what the images are RGB using the separations preview?

  2 questions: 1. how to spot what the images are RGB using the separations preview? 2. is there an easy way to convert those to CMYK without opening each to the PS? I've done it before all the time but I'm rusty and don't remember how I did it. I'm on CS6.

  One of the many methods to discover, you can:

  (1) you can use the links Panel.  Open the links Panel. Go to the menu of the Control Panel, and then choose Panel Options. In the dialog box Options Panel, under Show column check 'color space '. Now, when you view your links Panel it will show the color space of all related images.

  (2) you can use the preflight and set a preflight profile. In the profile, go to the section color > color spaces and unauthorized Modes and check RGB. Then all RGB images have reported.

  (3) If you need to know before you place the images, use Adobe Bridge. Open the folder where the image. Use the metadata Panel and view the color space of images.