In regard to the centre of defence and module SFR

Similar Questions

• How to add new SourceFire to the centre of defence

  Hello world

  Recently, we got new Sourcefire and need to know how to add it to the centre of defence.

  I'm new to environment fire source.

  Concerning

  Mahesh

  Mahesh,

  Maybe it's not a matter of license, but my team and I will address your issue.  I'll meet you at the end of day today.

  Thank you
  Merv Reyes

• How could get the categories of items and Module-specific to the company?

  Could we make it point to organization and specific Module categories? At present, the same structure of flex 'Categories of elements' is used by management of orders (already implemented) and now the purchase of / iProcurement (executed). To make category and module-specific to the company, we need to attach a value based on a custom SQL?
  
  In the implementation of the OM, we used flex structure "Article catégories" for items of products finished. Thus, a finished good CEMBAG has CEMENT category. BAG attached to it. Cement bulk's CEMENT. In BULK which are related to it. In this phase, we create spare parts using the same category structure (I was wondering, if we should change it). But now, when we will implement an element, we see all categories, for finished products and spare parts in all of all businesses. So, we see Working CAPITAL. BALL.., ELECTRIC. AMMETER... OM alongwith categories. We cannot change the default category value for the management of orders or inventory (already implemented), but it looks like that we would have to change the default category for purchases of separate categories. Also need to separate the research as the reason Codes. Tell code for a reception various gives all reason codes, those created for the management of orders and purchases.

  You must make sure that the categories assigned to the entire old category also appear in the new category.

• With regard to the values in controls and indicators

  I entered a value in a control of channel 1. According to our requirements, this value is fixed. I entered the value and I closed the application and I opened the app, the next day. But there is no value I entered the control of the chain. The value must be perceived by the user. How can I do this in LabView? Thanks in advance best regards Christophe

  After you enter the value you want, right-click on the control and select "... current value default data operation. Save the VI.

• With regard to the creation of sequence and relaxation

  Hello!!
  I use oracle 10g and I have tried to create a sequence of a table called 'emp' I need to autoincrement column 'emp_id' which has a varchar2 data type. How do I?
  Help, please!

  1 sequence cannot be linked to any specific table. They generate only sequential numbers and like [url http://asktom.oracle.com/pls/asktom/f?p=100:11:0:NO:P11_QUESTION_ID:2985886242221] Tom says: there is a 100% guarantee that the values generated by the sequence will have some gaps.
  2 sequence cannot be auto incremented. You must use Sequence.Nextval (). Either use directly in your insert statement or write a trigger for this.
  3. If the emp_id column is supposed to contain sequence values (which are numbers), why are you define as VARCHAR2? Keep in a number only.

  Vivek L

• Mouse behaves badly after the update MS Mouse and keyboard Center

  I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the 2.1.177.0 version.  Any suggestions?  TIA

  PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.

  Paul

  Hi Paul,.

  Thanks for posting your question on the Forums of community of Microsoft.

  Check out the link and follow the steps in the article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398#appliesTo

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Check out the link and check the number of the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  If you are able to get the number of the update failed, try to install the updates manually.
  Reference:
  http://www.Microsoft.com/en-us/download/default.aspx

  Hope this solves the problem.

• I bring you my affected MacBook Pro (17-inch late 2011) at the centre for Apple in Algeria and they refused to cover the repair and asked to pay $ 350.

  I bring you my affected MacBook Pro (17-inch late 2011) at the centre for Apple in Algeria and they refused to cover the repair and asked to pay $ 350.

  When did you purchase the MacBook? What reason they gave for the tarp does not it? What you expect from us, your fellow users?

• What is: IDT PC AUDIO - SHANGHAI DEVELOPMENT CENTER? I get this request to declare a 'mistake' and always send the request to the 'centre '.

  In the middle of something on the internet an error request. I get this request of the 'centre' above to respond to the request to report this error

  I always send the request for postponement of this 'error '.  It does not resemble the normal application I use to get from Windows Update.

  IDT stands for "Integrated Device Technology" and is probably the company providing your audio device driver.  Something wrong with the driver or the audio material.  If this happened to me, I would remove the device in Device Manager and reboot to allow the relocation of the unit.  I would also visit the web site of the manufacturer of the PC and download the latest driver for the audio device.  Usually, IDT provides drivers for OEMs and provides no support for the end user.  This can be quite useful: http://www.idt.com/products/audio-products/audio-driver-support-for-users-faq

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• With regard to the Epson V300 scanner. I installed the current version software driver successfully. It works fine until I turned off the computer. After the reboot, the scanner is not recognized and driver not found.

  On the page of 'Uninstall and change of program' of the computer, the Epson Scan icon with a red arrow on it.   In addition, elevated Epson Support found no problem. Indicated that the problem was with the computer or windows.      I installed on another computer and worked properly.    If there is a conflict with another device, I can't find it.

  Hello

  ·         You did changes to the computer before the show?

  Step 1: I would say you put the computer to boot and check that the software or conflicting drivers:

  http://support.Microsoft.com/kb/929135

  Note: Place the computer to normal startup by following step 7 from the link above.

  Step 2: Download and install the software driver in a clean boot state, and check to see if it helps:

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=113127&prodoid=63077159&infoType=downloads&platform=all

  Also turn off "allow the computer to turn off this device to save power" in power management for scanning.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Note: Valid also for Windows 7.

• RV180 need some advice/Suggestion regarding the rules of access and Services

  Hi, I expected to get some advice or suggestion with a RV180 question.  I have a cable modem connection that connects to my port WAN RV180 and we have a single static IP address on the WAN port and everything works great.  We have an internal Exchange Server, so we have a few inbound rules access allowing for ports 443 and 25.  It all works.

  This is the question that I encounter.  We have now another service internal now needs outside inside access on port 443 (https), but I already have this configuration on the router for Exchange and when I have both sense, of course, it won't work correctly because the router just takes the first rules of access and use the one that works very well for traffic Exchange , but not my other service.

  Is there another way to get this job where I can have two internal services on port 443 and the router can forward traffic appropriate to each of them since my first IP? (it doesn't really matter if I had two IP addresses because it always hits the same access list for internal services)

  All advice or suggestion would be great

  Hi, yours is a general networking, not specific to RV180 problem.

  As you have only one IP public (on the WAN port), you only have a single port 443, you can support two services outside-to-inside.

  The cheapest solution is one of the services to another port, if the service permits.

  The most expensive solution is to have public IP addresses.

• Why no response regarding the lack of background and text colors?

  Although I see that two posts asking why this happens, the only answer has been asked which PC they had. I'm having the same problem (background colors and text are ignored) with this pavilion ze4900 (IE9.1). Pages display properly on my desktop PC but not on this laptop. Driver chart updated today but no change. I'm not formatting HTML simple like bgcolor = text color and black lime green = talking (even if the format #00000). I do HTML (no java, no flash, but a simple formatting) for my web sites and ebay auctions and have never had this problem other than on this laptop.

  After the search for other sources mentioning accessibility features, I thought about it. The IE Options for accessibility and the colors were not the solution, but by going to control panel, I found other accessibility options and had the function of "High contrast" which forced most of the elements without color and also made most of the invisible extra boxes (no border).

• Need a clarification on the concept of 'World' and 'Group' with regard to CPU reviews

  All-

  I am investigating questions of CPU usage for one of my guests with esxtop. Can someone clarify the concept of 'World' and 'group '? Many of my guests have a 7 or 11 NWLD and I'm trying to figure out exactly this means. What I gather is the following:

  A guest has many worlds

  There is one guest per group

  A group contains many worlds

  Can someone also explain the purpose to describe the use of the processor in this way?

  Megan

  Hello.

  Check it out "[interpretation statistical esxtop | ]. "[http://Communities.VMware.com/docs/doc-9279.pdf]" document.  «[The planner of UC in VMware® ESX 4 |]» [ http://www.vmware.com/files/pdf/perf-vsphere-cpu_scheduler.pdf] "white book is also a good reference.

  Good luck!

• With regard to the deactivation of the program and installed

  At first, I installed Adobe Creative Suite 6 on both my desktop and laptop, after I found the capacity on my notebook isn't enough to carry them. So I turn off notebook and installed in my lab - top, but my lab - top was not working. The reason why I said I installed the program for two times. Please please tell me we should do? It's urgent! I need to do this weekend.

  If you can open one of the programs on your laptop computer, see help in the top toolbar and select Disable.

  If you are not able to open any program, you will need to contact the Support from Adobe and explain your problem.  They should be able to take care of necessary disabled.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• with regard to the convening of the lov by the corresponding button and pressing f9

  Hi all
  I use forms [32 bit] Version 6.0.8.24.1 (Production).
  Let me explain my problem with an example.
  Consider a text element that is database required field (in which a LOV is attached to it)
  so to call lov, I wrote 'list_values' k-listval Trigger.
  so that every time you press the key corresponding to the LOV (say f9) the corresponding lov will be displayed.
  I have a requirement that I should show a button so that when the user presses this button the LOV must appear and values must be assigned when the user selects the value in the list.
  trigger of w-b-p wrote

  go_item('item_name');
  do_key('List_Values');

  In essence I provide an option that the user can bring the LOV by pressing f9 or by pressing the button said above.
  My problem is that I am getting error oracle when the user does not enter this field. (which I am trying to solve.)
  If I put 'required' to above said article property to 'Yes' then the error we can avoid, but it does not allow to select the list with the key.
  
  Note: i have set the property post in list to 'yes '.
  
  Thank you...

  Your article defined on mandatory, but when click on your button LOV - you try to navigate out of the element.
  Be sure to set your property of navigable mouse button = False