In the application of FDM data protection

Similar Questions

• Value of FDM Data Protection - may refer to the HFM account defined field by the user?

  Dear experts,
  
  regarding the Protection of FDM data feature, is it possible to set as the value of protection all accounts with a given UD1?
  For example, I want to protect all the accounts that have been defined in the HFM with UD1 metadata = Form_Input. Is this possible?
  If so, what should I put in the field of Protection value 1 FDM?
  
  Thank you!

  It is unfortunately not possible. You can consider using one of the custom dimensions that you probably have hard-coded on the form as protection value instead.

• Problem server standard weblogic that does not detect the application of ADF data side

  Hi all

  I use the jdev11.1.1.7.0 version.

  I have deployed an adf on oracle weblogic server application. When to test a page server-side it dispalyed but with blank fields. When I try to insert the data, it shows an error like "lines cannot be created in the entity xxxx.eo (name of the entity with path mentioned on Jdeveloper). This same code is deployed in the weblogic server local and works very well.

  For DB connection: I created a JNDI connection and used on the configuration of the application module. DB connections are tested. they work very well on the server side.

  Could someone help on why the error comes from the side server.

  Thanks in advance,

  Suresh.

  Hi all

  Thanks are for all of your support.

  Problem is solved. It is may not be bounce oracle weblogic server.  After the rebound of the server, the database data is displayed in pages.

  Thank you

  Suresh.

• Failed to create the application of FDM

  Hi all

  I am a newbie in FDM Hyperion, I installed and configured HFM and FDM 11.1.2.3 2008R2 in VM window.

  Installation went well and the configuration went all very well for the Application Server, Load Balancing Manager, the Task Manager and web config Manager

  I am able to create a HFM application, but I am not able to create an Application <>FDM.

  I am creating the application using the Workbench. So I give all the details like name of the application, description, App Path & App group under general tab Oledb Provider, the service name, user and password in the database of the tab and click on 'OK '. After a while, I get a pop up message "unable to connect to the database. Please check the information of database and verify that the database is accessible."

  I did a search and found the following two links, but still no luck.

  http://Hyperion-Mady.blogspot.in/2013/11/unable-to-connect-to-database-please.html

  https://community.Oracle.com/thread/3538368

  Please help me!

  Hello

  have you given a static IP to your VM.

  If so, then open the hosts file and put an entry for that IP with FQDN.

  It seems also that you have installed new oracle client according to the PATH variable, you don't have it?

  Kind regards

  -DM

• Problems installing System Center Data Protection Manager 2010 in Server 2008 r2 DataCenter

  I try to install DPM 2010 and I installed all 4 of the installation of packages and they are all in the same folder according to the installation instructions on Microsoft Technet for DPM site 2010 and I clicked on the 1st package install and it unpacks the original installation package and it brings up the install window install data protection manager and clicked on install and I get the following error on the redistributable Visual C++ - Redistributable package Installation of Visual C++ has no... Run vcredist_x64.exe \redist\vcredist\ to install vcredist and re-run Setup.

  Whenever I tried to install the vcredist_x64.exe which was provided with the download I get the error that it cannot install, tht, there was an unexpected error.

  I downloaded the redistributable Microsoft and tried to install it, but the 2010 version is already installed and I could not install the version of 2008 on the 2010 version. I tried to download Visual C++ 2008 redistributable sp1 and installed correctly but when I come back and you try to install the System Center DPM 2010 setup.exe it always tries to go to the folder with the not redistributable sp1 provided with the download and it freezes in half way through even though the correct redist "is installed for server 2008 r2 x 64.

  Anyone got any suggestions? I've been searching and trying to figure out for hours and I don't see anything in the KB for DPM 2010 or technet.

  Hi osiguy,

  Since the problem is related to the Data Protection Manager, I suggest that you post your question in the following forum.

  Forum for Data Protection Manager

• Update IDSM2 5,0000 S225 to 5.1 using the application partition

  can I switch an IDSM2 (WS-SVC-IDSM2-BUN) in a 5,0000 S225 5.1 6513 by copying the partition of 5.1 application on the sensor

  [Correction to the userguide cisco]

  Chapter 10 Configuring the sensor using the CLI

  Modules and devices available

  Reimage on JOINT-2

  This section contains the following topics:

  Catalyst Software, page 10-124

  Software Cisco IOS, page 10-126

  Catalyst Software

  To reimage the application partition, follow these steps:

  Step 1 get the file from the software Center on Cisco.com and copy application partition

  it to a FTP server.

  Step 2, connect to the switch CLI.

  Step 3 start the JOINT-2 to the maintenance partition:

  cat6k > (enable) reset module_number cf:1

  Step 4 connect to the partition maintenance CLI:

  Login: guest

  Password: cisco

  Step 5 Reimage the application partition:

  [email protected] / * /# ftp://user@ftp server IP/directory update

  file access/image path

  Step 6 specify the FTP server password.

  After the application partition file has been downloaded, you are asked if you

  you want to go forward:

  The upgrade will scan the content on the hard drive. Do you want to

  Continue to install [y | n]:

  Step 7 type y to continue.

  When the application partition file has been installed, you are returned to the

  maintenance CLI score.

  Out of step 8 maintenance partition CLI and go back to the switch CLI.

  Step 9 reboot the JOINT-2 for the application partition:

  cat6k > (enable) reset module_number hdd:1

  Step 10 when the JOINT-2 has restarted, check the version of the software.

  Step 11 in the partition CLI application log and initialize the JOINT-2.

  Page 10-2, in view of the procedure, see initialization of the sensor.

  IF NOT, THEN IS IT SHORTENED 4.1 to 5.1?

  I was in the middle of editing my answer when he entered, check again. There is the question of "fact the maint.". partition must be upgraded? "and I have identified patches and GIS level to apply later.

• Can CSA produce an inventory of the applications?

  Can produce CSA and an inventory of the applications installed on a protected host?

  Yes, if you enable investigation of Application deployment, you will get an inventory of installed applications (what you see in Add/Remove programs on the PC).  In addition, CSA also follows the processes running on the machine, then you will see applications that are not "installed", but run as just transient process.

  Thank you
  Josh

• Change adapter HFM after the upgrade of FDM 11.1.1.3 to 11.1.2.1

  Hello
  
  I've updated the FDM since version 11.1.1.3 to 11.1.2.1. The last step I think is to re - register the adapters to 11.1.2.1 FM11x-G5-E - version
  All know how with rebuild them the maps?
  
  Or pointers appreciated!
  
  Thank you
  PM

  The adapter is not related to the mapping table. Simply import the XML adapter and then save and configure the adapter on each application server in FDM in the environment:

  (a) to connect to the application of FDM via the established customer
  (b) choose file > import and select the file FM11x-G5 - E.XML and choose 'open '.
  (c) click on "Select all" and click "Import" to import the card in the application
  (d) copy the folder "AdapterComponents" which appeared in the card .zip file in the Oraclle\Middleware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents directory
  (e) choose file > adapter register and choose the AdapterComponents\fdmFm11xG5E\fdmFM11xG5E.dll file and choose 'open '.
  (f) make a right click on the FM11x-G5-E adapter and choose 'configure' and enter username/password / confirm password/domain of FDM Service account and click OK. * NOTE: This is the account that was used for the configs FDM (App Server, server load balancing, tasks, Web Config Manager)
  (g) choose Tools > Application settings and change the adapter FM11x-G5-E installation Code

  You can then syncronzie the settings of the adapter from the old to the new card by right-clicking the adapter Fm11x-G5-E and choose "Synchronize" and choose the adapter FM11x-G5-C as a source and click OK to copy the settings of the new card.

  You may need to update the target periods and categories in the Control Board on the web.

  That should be all.

• Oracle data protection

  Can someone tell me please in the right direction. Is there a difference between the Oracle Data Protection Tivoli, Tivoli Storage Manager, and Data Protection. What I need to figure out what I need to get working with TDP RMAN. The environment is R2 AIX and Oracle 10 g

  Tivoli Storage Manager (TSM) is the main software.
  Data protection (there are several for Oracle of the different dbs, SQL Server etc.) is specifically designed for backup and restore of the databases.

  You can not install NT without installed first TSM.

  Hope that helps.

• Cannot create the application under "C:\programData\Application Data" directories.

  I am trying to install a program, but it fails to install with error "Unable to create directories of the application under"C:\programData\Application"features.". It sounds like a permissions issue, so I compared the permissions on another installation of Windows 8 who did install correctly and it appears to be identical.
  Only the "ProgramData" folder is visible. The ApplicationData folder is hidden and I can't display to check the contents of the folder or permissions.

  Any ideas?

  Hi Ken,

  Please answer the following questions so that we can get a better idea about the issue.

  1. what application are you trying to install?

  2. What is the exact error message you get?

  AppData is a hidden folder. The Appdata folder in the program data is a super hidden folder. We should not make any changes in this folder as it effects the behavior of other applications as well. You can view the file by following these steps.

  Here are the steps to display the folder.

  a. press Windows key + W , type: Hidden

  b. click on settings under the search box.

  c. click Show hidden files and folders and drives on the left side of your screen s.

  d. then click on Show hidden files, folders and trainings and uncheck Hide protected system files.

  e. click OK

  In Windows 8, the default location of user data has changed. To enable interoperability with existing applications, junction points are used in the deprecated locations and point to the new locations in Windows 8. A junction Point is a physical location on the local hard disk that points to another location on the drive or another storage device. So, here the application is not able to find the point of junction. There could be two reasons for the question. One is the application is unable to find the path and other permissions.

  I suggest you run the installer fix and

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/?WA=wsignin1.0

  Note: when it gives you the possibility to solve the problem by itself, or manually, manually select and then continue. This will help you in the installation of the application.

  Given permission, we know which you try to install the application. It would be better if you contact the manufacturer of the product for this particular application permission issues.

  Let us know the status of the issue. We would be happy to help you.

• I am facing some problems with the installation of data protection. Please see below for details

  We use the data protection in our project.  The research that I have done in protecting data, I realized that the FDM adds the data in protected intersections to load the file that is created by FDM via the import process. The problem is that there are actions given in HFM and I get an error that says: "error: load the file cannot contain action data according to user option." I'm pretty sure that some user option (it would be great if you have an idea where I can find this user option) prevents data already present of shares to be loaded via FDM. Have faced this kind of error before? Is there a work around on this?

  Thank you

  Rohit

  Hello

  The user option which is the origin of the problem is 'File Contains Data property'. You must make sure that this load option is enabled when you start loading in FDM process if the dataset that you present must contain data of shares.

  Kind regards

  Simon

• Managed provider: the operation of data protection has failed.

  We just tried deploy a .net web 4 with the supplier managed to beta. When you try to open a new connection, we reached this exception:
  
  The operation of data protection has failed. This may be due to not having no user profile not loaded for the user context of the current thread, which may be the case if the thread borrows.
  
  Is there an app pool IIS framework that we need to change to make it work? Locally, it works fine, so I guess it's a certain type of permissions issue.

  You are able to check if 'Load user profile' is set to true or false for the identities that do not work?

  If necessary, you can find the value in the following way in the IIS Manager:

  -Select the Application Pools in the tree view under the name of server
  -Under the Application Pools listed, right click on the pool of interest and select Advanced settings... from the context menu
  -Scroll up to the process model section and check the value "load user profile.

  I think you may encounter this situation if "Load user profile" is set to "false".

  As always, additions, corrections, clarifications etc are welcome.

• How to protect my plugin (for the player) before the application of Adobe

  Hello

  I would like to know how can I protect my plugin technology before showing it to Adobe employees through the application process. Is there a risk of having the stolen idea? Thank you

  You need ot the document than the parts where it interacts with the drive itself.  We want to make sure that you are not adding features to the reader that are already in Acrobat.

  From: Adobe Forums [email protected]<>[email protected]>

  Reply-To: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Date: Wednesday, October 26, 2011 04:30:47-0700

  To: Leonard Rosenthol [email protected]<>[email protected]>

  Topic: How to protect my plugin (for the player) before the application of Adobe

  Re: How to protect my plugin (for the reader) prior to application of Adobe

  created by DevAcrohttp://forums.adobe.com/people/DevAcro> in Acrobat SDK - see the discussion complete onhttp://forums.adobe.com/message/3990776#3990776

• How do MANUALLY enter you data into the application of health 10 IOS? There is no symbol and touch edit only gives you the option to delete existing data.

  I checked in the application of the health and read the Apple support page. They show the screen for 10 IOS on an iPhone, but their instructions don't work. There is not a Plus symbol to add data manually. It has only an editing tool that you can touch and only allows you to delete data.

  Hi, rmetzker!

  To manually enter the data points in the application of health, first go to the display of data on health as shown below.

  

  Then select category to which you want to enter data in (I'll use body measurements for example), then press on what data you enter (measurements > weight). In the upper right corner, it will be a plus + icon for you to manually enter your own data points.

  

  I hope this helps!

• How do you add the test results in the application of the health data?

  I had a medical test yesterday, and I want to keep a record of the results.

  I want also to a record running of my blood pressure, pulse and hemoglobin, I take each week.

  Hello

  To add data manually, open the application health and go to: data on health (tab) > choose a category (or select all) > tap on a data type (for example, blood pressure) > add a data Point > add your data.