THE MONITOR FUNCTIONS

Similar Questions

• How to insulate the wait at some of the code function

  I'm building a system to applaud ecg with an external Stimulator using TTL of programming impulses to work along the side of the information obtained from the ECG. The most important of these features is the heart rate. However, whenever I activate my pulse trains in the code, the function DAQmx wait until Done.vi made a break measure everything in the code, including the part of my code that monitors heart rate, which uses time to for. What I would like, is the wait function only affects the pulse train generators without a break anything else in the code. Is this possible? And if so how can I get there?

  I will attach my vi

  Your problem is that everything is in the same loop.  If the longest operation is going to determine the flow of the loop (and therefore rates of treatment).  What you really need to do, is to separate tasks on separate loops.  Use of queues or notifiers to communicate your data and commands between the loops.

• Turn off the monitor and input block

  Hello

  I am trying to create simple VI that will turn off the monitor (or screen saver turns on) and entrance to block mouse and keyboard - user so won't be able to see the screen and do any action. I use system32.dll for this.

  My problem is that when my VI turn off the monitor, user can enable it back by simply moving the mouse or using the keyboard, similarly as these devices are blocked (by the function BlockInput of System32.dll).

  How can I do the ultimate freeze?

  Attached VI is based on Danny_Funk 'disable the monitor.vi.

  Dear bieneck,

  This is a very interesting problem you have there. I was snooping around Microsoft technical support for a bit, and the only reasonably simple method, I found was running powercfg.exe from an elevated line comand. You can query wake programmable devices with powercfg - devicequery wake_programmable poster theand disable using "Your device name" powercfg - devicedisablewake. Here you can find a more detailed documentation.

  Except that I have found no reliable method that will spare you excessive digging in the registry. Maybe some 3 rd party tool?

  One more thing: If your goal is to prevent the user from interacting with anything, it would be easier to make up a large modal window that does not workaround? At least, it seems to me that it is much simpler to use a native Windows function that is not provided for this purpose.

  Kind regards:

• My LifeCam HD 6000 displays an image in an image on the monitor, how can you get rid of the image in the image?

  My LifeCam HD 6000 displays an image in an image on the monitor. I have not been able to get rid of it and does not know how to do it.

  It is generally a function of the camera software or chat software, in order to check these options to turn on/off photo to the photo support.

• my computer hp zd 8000 laptop has a line of 1.25 verical white up and down the monitor, unable to solve the problem

  my computer hp laptop 2002 zd 8000 has a vertical white line from top to bottom, 1.25 impossible to remove, your suggestion would be useful.

  Hi, Nylachance,

  Open the menu of the monitor by pressing the button on the console for the functions in the menu. This will be one of the buttons on the face of the screen. If you encounter problems, find the button press, consult the operating instructions of your particular model camera.

  Scroll through the menu options with the '+' and '-' buttons on the screen until you find the option "Degauss".

  Press the 'Enter' to the demagnetization of the screen. It aims to realign the magnetic field of the monitor, potentially solve your problem.

  Go to your video card manufacturer's Web site and visit the "Support" page Your computer's documentation should include the manufacturer and model of your video card number. If you no longer have the manual for your computer, visit the manufacturer's website; There is a PDF version available in the Support"" section.

  Click on the section "Downloads" of the support page and enter your specific video card model number to locate your required driver.

  Download the driver and save it to your desktop.

  Double-click the installation file to start the process. Follow the on-screen instructions to update your driver, who usually has to agree to a license agreement.

  Restart your computer and your monitor.

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• How can I get an article on Monitor 2 to open the monitor 2?

  original title; Extended desktop problem. How can I get an article on Monitor 2 to open the monitor 2? Mine keep opening the monitor 1 that denies the goal to use the extended desktop.

  Using extended desktop, I can get two different articles on 2 different monitors but nothing on Monitor 2 opens on the monitor 1.

  How to open the file in Monitor 2?
  Is Monitor 2 your primary monitor?
  What is the specific program to open the file?

  The installation of the default monitor is the mirror mode, it's both monitors display the same thing, when you change Extended t - it still display mirrored for all programs? Initially when you open a program in extended desktop mode, the program opens on monitor 1, you must drag Monitor 2 monitor 1:

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  If you were able to drag the program to monitor the 2 but still shows on monitor 1 m swiped in mirror mode try setting back to mirror and then return to the expanded view.

  To change an extended to a mirrored display display

  The following procedure works only for laptops. If you are using a desktop computer, you can change a view extended to a mirrored display by using the software provided with your video card or display driver.
  1. open Windows Mobility Center by clicking the Start button, click on the Panel, clicking Mobile PC, and then click Mobility Center Windows.

  2. on the external display tile, click Connect display.

  3. in the dialog box new display detected, click on mirror, and then click OK.

  More laptops use FN + F5, FN + F7 or FN + F8 to cycle through the display modes. To determine what function keyboard shortcut, you will need to use, see the documentation that came with your laptop or go to the manufacturer's Web site.

  To change a mirrored display a view extended

  1. open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.

  2. on the monitor tab, select the numbered icon that represents the additional monitor that you have connected.

  If you connect only one additional monitor to your computer, its icon is identified by the number '2 '.

  3. Select the extend the desktop on this monitor check box, and then click OK.

  4. If you are prompted to keep the current settings, click Yes.

• calibration of the monitor double u2713h... need help with the same look on the two

  bought the 2 monitors at the same time and just installed the software from dell.com and calibrated to both of them using the i1 display pro.  used in step by step instructions on photographylife.com and it seemed to do what it was supposed to.  picked native and 120 in the first step for the two, crossed the two monitors and save profiles on each cal1 named 'left' and 'right '.

  However the monitors alike.  the image of my right is slightly warmer and brighter.  How can I get it so that both monitors are similar?  should I do the advanced calibration?

  TIA

  DEVELOPMENT expenses calculated that lut3d is not so precise about white point. White point DCCS target drift is an old question, it goes the same for grey neutrality. It is a software problem that Dell (& Xrite) are not willing to fix. Run a check with ArgyllCMS/DisplayCAL for each screen test, then you will see how different are the white dots.

  Order IR to match 'white' for your Dells, your best choice is to use calibration LUT of graphics card. Ned to do this properly, you can:

  -a Quadro or ATI/AMD graphics card. If you do not have one, you don't get the strips, no mater what monitor you have. So if you have an iGPU intel or a nvidia Geforce... Sorry for you.

  -a calibration & profiling software that makes use of a good spectral correction for GB - LED. Spectral correction of XRite for GB-LEDs is called 'RG_phosphor '. For example: i1Profiler or ArgyllCMS/DisplayCAL (v2.6 or v3.1, the latest is less functional, too mandatory 'clicks' to do the same thing)

  The easiest way is to do the calibration in "custom color" OSD mode which gives you access to RGB win & offset controls for each monitor.

  Uniformity cannot be resolved. This way you can get a 'better' white screen central match point (where you place the colorimeter) but if you have a more red/green shift on the left side of the screen, it may seem as if no white screens don't match not if seen next to each other.

• How to activate the monitor USB ports?

  I got my monitor connected to my surface 3 pro and I tried to plug in my phone so I am connected to the USB hub on the right side of the screen of WFP 2007 and nothing happens I have to assume I have to configure something but I don't know what.

  First of all, I doubt that the USB ports monitor downstream will provide enough power to charge the phone. Give it a shot. Second, for the monitor USB ports downstream from the function, you need the USB upstream in upstream USB port monitor. The other end plugs into a USB port on the computer.

  

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• "No signal not detected" when using the monitor.

  Original title: Second just conked monitor

  I have two LG monitors with a desktop Acer running Win7Pro: Monitor1 (M1) = W2253 Monitor 2 (M2) = 23MP65HQ. All of a sudden yesterday stopped M2 display. It is said 'No signal detected' and goes to sleep. In the devices list, it is displayed as generic PnP monitor. When I check the resolution of the screen, it shows M2 in a small gray square, but it is not identifiable or traceable.

  It is the monitor or the cable. When I unplug M1, M2 is functioning normally.  So it seems that I can't use the two together no more. Except for a little while after the blackout. I opened a program had been posted on M2 before the failure of current and for a short time while M2 has been reactivated, but with a bad resolution. When I tried to set the resolution, the screen went black again and has stay black since. The display resolution is a constant problem before that. Sometimes he'd lose the setting and I reach the screen resolution and to detect and it would be fixed - just not always. An occasional pain but is not debilitating.

  There were no cases leading up to black screen - except a Windows Update. I didn't do any cleaning, moving, or adjustment of any sort, no power bumps or other external event. He became all black while I was doing a regular job. This is my work computer and I'm the only person who uses it.

  Help?

  Click on the following link and check if it helps.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

• increase the brightness on the monitor

  the brightness on my monitor setting reduces the brightness of my screen, but I can't raise the brightness later. Anyway there?

  Hello

  (1) what is the brand and model of the computer?

  (2) don't you make recent changes before the show?

  (3) you get an error message/code?

  (4) you specify the monitor settings or settings in Windows 8?

  Method 1: Enable adaptive brightness

  1. On the start screen, type Control Panel , and select the control panel.
  2. Set the display: drop-down category menu
  3. Select the material and audio.
  4. Select the Power Options.
  5. Click change plan settings on your current plan of power
  6. Select change advanced power settings
  7. Expand the view
  8. Expand enable adaptive brightness
  9. Change the setting to enabled , and then select OK.

  Method 2: Check the settings in the power options:

  1. press the key Windows + X to display the system menu, and select Power Options.

  2. in the power Plan that you're using, click Change Plan settings .

  3. click on the link change advanced power settings .

  4. in the options dialog box, scroll the screen and expand this option.

  5. search for the parameters of brightness and the brightness of the display.

  Method 3: The computer screen. Laptop displays is not brightness or contrast buttons on the front. For the majority of laptops, there is not a control for adjusting the contrast. However, you can set the brightness of many laptops by pressing on and the Fn key, and then pressing a function key to reduce brightness () or increase brightness (). Calibration of the color display on a portable computer, set the display for setting the maximum brightness.

  For more information on the definition of the brightness and contrast of your display, see the documentation that came with it or go to the manufacturer's Web site.

  For reference:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  Please report if you are still having the problem. I will be happy to provide you with additional options available that you can use to get this problem resolved

• Can I output the monitor program PremierePro CC (only) to a 2nd video screen?

  I already have (years) used PremierePro on an edition of PC system. At this time, I used a box of cards and small groups of Matrox - it was so easy to put in place a 2nd monitor to display the program output (only).

  I started using new PremierePro (CC version) but this time on an iMac 27 "retina 5 k (max for the ram, processors and graphics functionality). I'd quite like to discover the program output only (or at least mostly) on a 2nd 1080HD video monitor. Is it possible to do? With no junction box, I guess that this cannot be done. Is this fair?  I know I could set up an iMac HDMI output, but that would be out of the whole office. I just want to really take a power of video output (monitor of the program only) rather than the entire desktop. Is it some sort of break Thunderbolt to send with a HDMI or DVi connection, which can display only the monitor program (like those old buttons)?

  Of course the iMac screen 5 k and the video monitor will be quite different devices - so I can't really just the range double configuration screen. A 2nd screen Mac is expensive - and it would be another screen to the retina, 5 k.

  As background information, for now I'm only editing content 1080HD that thus the 2nd monitor should be consistent 1080HD. I have various computer and video monitors available if this configuration is possible. I'm not too concerned about the quality of the image in the 2nd monitor - its more about speed reading to check for sync and motion - changes especicailly when a customer sits the long side (and Yes, I hate too). The iMac 27' is a good size screen, but I'm edition multi channel animation graphics and pictures (no animated videos), it fills the screen fast enough. If I want to program a monitor window half-decent size, I am constantly scrolling and minimization / maximization of the channels that I can see detailed work areas easily.

  If I ask a stupid question here, please don't shoot me :-) As I have said for a while I used the PP, but now I use it everyday - so just going back to it.

  Thanks for reading - and advice you might have would be welcome.

  Thank you.

  Pete

  If all you need is a program-monitor output to a second monitor, woudn't integrated two-monitor process work? No, is not the release of calibrated equipment which is often sought for high range editing, but it works for most cases... just have a second monitor mounted on your card system and on the Preferences tab, select it as shown...

  

  Just make sure that your operating system 'sees' your normal monitor as a screen, and then they will appear in this dialog box as your operating system lists them. PrPro always default to sending the output of the program monitor to monitor 2.

  No box necessary engine... and many who have the outboard motor to run a high-end TV, also use it for their treatment of General works.

  Neil

• How can I get the CONTROL function, click ON work?

  The CONTROL function, click ON does not work when I have my extra monitor plugged into my laptop. Any ideas on how to get this to work outside to unplug my extra monitor of my laptop to work?

  It works any differently if you switch to the external monitor as the main screen?

• Using the interval function works well for the end of the month

  
  I need to be able to get 1 year, 2 years, etc and also 1 month 2 months ago for each date in the calendar.  I can use the function of the INTERVAL for the most part, but it does not work if there is 1 month (year) would produce an invalid date.

  For example, the monitoring generates an error.

  Select TO_DATE (February 29, 2012 ')- INTERVAL of '1' YEAR  FROM DUAL; 

  Select TO_DATE('31-MAR-2011') - MONTH INTERVAL '1' FROM DUAL;

  Is there a way to get chosen to return on February 28, 2011?

  Thank you for your help.

  Sandy

  Hi, Sandy,

  ADD_MONTHs always returns a valid DATE.

  ADD_MONTHS (TO_DATE ((29 février 2012 ', «DD-MON-YYYY»), 12 * n))

  will return on February 29, n years after 2012, if this year is a leap year and February 28 this year, if it is not a leap year.

  In general

  ADD_MONTHS (d, m)

  Returns the date months after DATE m d.  If d is located near the end of his month and months m months in the future is for several days, then ADD_MONTHS returns the last day of that month.  By example, if d is on 31 March and 1 m, then ADD_MONTHS returns the last day in April (1 month after March), because there is no day 31 in April.