In the box + write protect simultaneous RDM + disabling of the cluster

Similar Questions

• I have a micro cell phone memory card, I'm trying to delete files MPG and it says that the disk is write-protected, how can I disable this?

  I have a micro card.  I used to put photo files.  Today I'm trying to remove them and I get a message that the card is write protected.  How can I disable this?

  I guess you put the micro card in full-size SD card reader? Look on the side of the SD card. There is a small switch that is write protected. Put it to the other position.

• The drive - to enable or disable write protection

  The drive - to enable or disable write protection?

  Hello

   

  You can remove or add protection from writing to your hard drive using the method below:

  a. open the start menu and in the search bar type regeditand press to enter. The Registry Editor opens.

  Navigate to the following location:

  b. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

  Note: If the StorageDevicePolicies registry key does not exist, you must create it manually.

  c. double-click the key Write Protect in the right window and set the value to 0 for OFF , and value = 1 .

  d. data area, and then press OK button

  e. restart your computer and test.

   

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP
  http://support.Microsoft.com/kb/322756/

   

  Note: You can view the documentation for the hard drive for the parameters of the write protection.

  Hope this information is useful.

• How to prevent the dialog box asking how to manage PDFs in Protected Mode is disabled?

  Hello

  So I must be missing a registry key setting somewhere or something (I hope).  Need Adobe Acrobat Reader 10.1.4.  When install us Adobe Acrobat Reader, we disable the Safe_mode due to some problems with it.

  My problem is, when you start Reader or try to view a PDF file embedded in a web page (or elsewhere for that matter), it will appear a dialog box asking you how to proceed.  You are given three options:

  1. Open a PDF file while protected mode this time.
  2. Always open a PDF file while the Protected Mode is disabled.
  3. Never together open PDFs, that protected mode is disabled.

  I need to configure so that option 2 is the behavior of player.

  We are a small shop, I have only 4 people in my team (except me).  We have more than 1,500 machines as public kiosks that need to get this configured when 10.1.4 is installed.  Player is currently obsolete in our deployment, apparently because of this problem keeps pushing the newer versions.

  If anyone has any ideas I'd love to hear them.  I have manually set and looked at the hive in registry for Adobe and have not seen any change in existing keys or the new keys created so I'm not sure it's something that can be made through the registry...

  Looks like the anti-virus was the culprit.  I have to remind these exceptions!  Just a shame that you must add a source of vulnerability as an exception...

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• How do I remove the Flash DRIVE and external hard drive write protection

  Original title: A distress call

  My Kingston Traveller of 16G flash drive as my 320 G external drive HP say that they are write protected.  I'm not sure how that becomes activated but would really like to know how to disable.

  Your best bet is to consult the manual for readers, and you can also ask on the manufacturer's Web site.  For example: http://www.kingston.com/support/

  Steve

• Flash drive, write protected after the use of Ready Boost

  I have a 8 GB USB flash drive, and I've been using ~ 4 GB for Ready Boost for quite a while now. When I tried to write something on the drive recently, I get a message saying that it is write protected. I tried to change the size of the cache, but has nothing - no error and no change. Tried turning off RB for the drive and nothing. There is no protection switch on the drive, so nothing to break. Tried to restart, refomratting the drive - no joy.

  Only, I could get a new drive because they are so cheap, but this one has a MicroSD in it like a separate disk drive, so I would keep

  Hello

  You can remove your usb flash drive write protection using the method below:
  a. open the start menu, in the search bar type regedit, and then press ENTER. This wil open the registry editor.
  b. navigate to the following location:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  Note:
  If StorageDevicePolicies registry key does not exist, you must create it manually.
  c. highlight StorageDevicePolicies, and then create a new DWORD called WriteProtect (32-bit).
  d. double-click the registration key in the right window, and then set it to a value of 0 in the value data box
  e. press OK
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• How can I remove the write protection from my photos to transfer to an external hard drive?

  I have Windows XP and I want to transfer my photos on an external hard drive, but I can't remove write protection. I right click and uncheck the box, but it changes on its own. How can I transfer my photos?

  Have you seen dialogue indicating files can't be copied?
  If_Yes_what at - he say and how have you tried to copy
  the files?

  Maybe the info will help you...

  OK... when the external hard drive is connected to your
  PC... admittedly with a drive letter to start.
  My computer.

  Once you know what that is... try to drive letter the following
  and let us know what is the result.

  Select (highlight) the file names of the photos you want to
  copy on the external hard drive. Right-click on the selected group
  (or the folder itself if you want that all the photos) and the
  menu choose... Send to... and choose the drive letter of
  the external drive.

  Then uncheck "read-only" you left click... "." Apply / OK?
  (it works in a lot also selected)

• CD/DVD REFUSES TO ACCEPT THE VIRGINS DVD. SAYS THAT IT IS WRITE PROTECTED. IMPOSSIBLE TO REMOVE WRITE PROTECT

  When I insert a blank DVD dialog box is displayed.
  When I right click on the CD/DVD device and select Format, he returned with the disk is write protected.

  What DVD writing program you have installed?  BTW, you do NOT format a DVD-Rs.

• I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do.

  I am trying to copy photos to a CD - RW disc nine, the message indicates that the disk is write-protected, what should I do

  Hello

  You can follow the steps below to solve the problem:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  1. click on Start, typeregedit in the Start search box and press ENTER.

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
  
  3. If the key exists, go to step 7.

  4. in case the StorageDevicePolicies key does not exist, you must create a new.

  a. right click on the empty field and select new > key.

  b. name the new key as StorageDevicePolicies.

  5. turn on highlight StorageDevicePolicies, and then create a new DWORD called (32-bit) as WriteProtect.
  6. double click on WriteProtectand set its data value to 0.

  7. If the key already exists, double click on WriteProtect and change its value from 1 to 0 to allow write access.
  8. exit the registry editor.

  Check whether the problem is resolved.

• Restart issues "Group Policy Client Service could not connect." "The media is write protected."

  The problem arises when a Norton message requires a reboot. It does not get me beyond the point when Windows prompts for a password. The words appear on screen reboot problems ' Customer Service Group Policy has no connect. " "The media is write protected."

  I cause the phone to crash in order to activate the Windows repair program.  It works but the custody of Norton is disabled. A program Norton Repair heals so that the fault.

  I had several chat sessions with Norton, but they now point me to Microsoft saying that it is a Windows program that is related to Norton.

  Hi ColinAW,

  Your computer is connected to a domain?

  The question could be linked to the program Norton himself. I suggest you try the following steps:

  Step 1: Disable Norton Security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

   

  Step 2: The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If this problem occurs only updated Norton software, of course, the problem is related to the Norton software, and you can check with Norton again for any patches to address this issue.

  http://www.Symantec.com/Norton/support/index.jsp

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected

  When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected. How can I solve this problem? Thank you for your time, Shawn

  You may not have the correct permissions or own the medium on which you try to perform the backup.  Here are some instructions on how to give you the right permissions and Take Ownership (if necessary).

  To view your permissions, right-click on the file/folder/drive, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/. In this csse make sure grant you full permissions and check also advanced special permissions (including the inherited permissions) which can substitute for this entry to limit your rights by assembling as well.

  To resolve this problem with folders or drive, take possession of the records or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• remove the write protection

  I am trying to remove the write protection, so I can remove and add games to a DSi game card.

  Hello

  Try putting a piece of tape on the write protect the area. Sometimes, you have to use so much that the
  card will fit into the slot.

  Memory card is write protected or locked
  http://KB.SanDisk.com/app/answers/detail/A_ID/1102/kW/standard%20card%20write%20protect/r_id/101834

  -----------------------------------------------

  Maybe something here:

  2 free tools to write protect the registry USB Flash drives
  http://thepcsecurity.com/2-free-tools-to-write-protect-USB-flash-drives-from-registry/

  Write Protect and Disable USB Drive - reverse this trend
  http://www.mydigitallife.info/2009/04/07/write-protect-and-disable-USB-drive/

  Some readers have a write protect switch on them
  http://www.Raymond.CC/blog/archives/2008/10/25/looking-for-a-USB-flash-drive-with-read-only-or-write-protect-switch/

  Sometimes you have to reformat the hard drive and it could be bad.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Write protection won't let me delete the MP3 from my MP3 using Vista

  I am running windows vista Home premium and using Player 2 GB mp3 audio South known work. I can't do anything but open the files that already exist on the with on mp3 player error telling me to remove the disk write protection. This worked fine with XP but not with vista on my pc or laptop. Thanks for any help you have. BTW, this mp3 player has no locks or switch.
  Thank you

  Hi KaplanStudent,

  First try to run a scan for viruses on your mp3 player and check if the same error.

  Second, you can remove the mp3 player ideal protection.

  1. connect your mp3 player to your computer.

  2. click on Start > calculater.

  3. right click on the drive and click Properties > Edit.

  4. check the box for the option write .

  5 try to delete or copy files.

  You can also contact audio South in this regard.

  Try these steps and let us know the result.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to format the USB write protected in windows 7

  Hi I want to format a 8 GB hp pen drive. When I format the USB key, it displays a message that's writing protected.can help you in this problem. Please help me I wait for your answer you.

  Thank you

  Hi Chantal,

  The question is limited to any particular pen driver?

  I suggest trying the steps and check if that helps.

  You can remove from the USB flash drive write protection using the following steps:

  a. open the Start menu, in the search bar typeregedit , then press Efriendship. The Registry Editor opens.

  b. navigate to the following location:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

  Note: If theStorageDevicePolicies registry key does not exist, you must create it manually.
  c. highlight the Strategies of storage devicesand then create a new DWORD called (32-bit) aswrite protect.

  d. Double click on the keyrecording in the right window and set the value to 0 inthe value data box , and then press the OK button.

  e. restart the computer and try formatting USB key.

  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Keep us updated on the status of the issue.