Application of computer Virtual Image precompiled App development database: start of the CBD fails with ORA-12514

Similar Questions

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• Hello, I bought Creative Suite Master in October 2014 and my computer was stolen from my car to that effect the license associated with this machine, therefore, is more accessible to me. You have a function to disable this computer with my purchase if I c

  Hello, I bought Creative Suite Master in October 2014 and my computer was stolen from my car to that effect the license associated with this machine, therefore, is more accessible to me. You have a function to disable this computer with my purchase, so I can reinstall it on my newly purchased machine?

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help", https://helpx.adobe.com/contact.html , and request activation reset account.

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• App does not start on the Simulator, error: (this file could not be opened. Make sure you have the proper permissions and try again).

  I get an error when I try to run my application after packaging and loading on the Playbook Simulator.

  When I try to start my application, I get a white screen for 1 second, it flashes black for a second before leaving white and then I get this error message: "this file could not be opened. Make sure you have the proper permissions and try again. »

  

  I have in my source folder:

  config. XML

  Icon.PNG

  Index.html

  Load.js

  Progress.CSS

  I don't think that my code using anything that requires permissions. (that is to say, does not use the shared files, or camera, etc.)  At the moment it is simply a text box and a button that calls code that retrieves data from the database I have. API reference, he said that I don't need permission for the use of the HTML5 and sql database.

  This is my config file:

  
  http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="1.0.0.0">
  
    Test
  
    
      A simple test app.
    
  
  My Name
  
    
  
  access_shared
  
  
    
    
  
  
  

  I don't have any uses which I put in the "access_shared" to test, but it did not help.

  My app works very well in the Opera browser, and also in the training Simulator, I don't understand why it does not work on the playbook Simulator.

  I read something on the extension of the Javascript and exporting to a JAR file. Do I need to do? I have only a single .js file with a few defined variables and functions that implement the functionality of database/sql.

  I can't think of anything...

  Make sure that the index.html file referenced in your config.xml file has exactly the same name as the index.html file in your application.  You list all of your files with the 'I' for 'Index.xml' in capital letters.  The Tablet OS applies a case-sensitive file system.

  If this is the case, I suggest rename Index.html index.html, reconditioning and try again.

• I just installed a SSHD and cloned my old SATA HDD through him. My CC 2015 apps work okay but the creative cloud app does not start. The circle of rotation right guard go. What should I do?

  I just installed a SSHD and cloned my old SATA HDD through him. My CC 2015 (Photoshop and Lightroom) apps work okay but creative application cloud does not start. The circle of rotation right guard go. What should I do?

  Sorry to have troubled you. I rebooted and everything works now.

• Machine virtual Windows does not start on the MBP retina with 10.9 Mavericks DP3

  Mavericks 10.9 DP3 running on a MacBook Pro 15 "with Retina display 2012 and the TP2013 merger causes the following problem:

  None of my virtual machines created in Fusion 5.0.3 will begin.  I have Windows 2008 R2 and Windows 8 x 64.  I also tried to create a new virtual machine from Windows 8 x 64 with all defaults under the technology preview, and the same problem occurs just after the BIOS screen clears, and above all expected Windows 8 installer would (do not press any key to start from DVD, etc.).

  VMware Fusion has encountered an error and has stopped Windows.

  Click on restart Windows to start Windows again. Click report to collect data and to ask the support of VMware.

  [Ignore]     [Report...]     [Restart Windows]

  Ignore everything stops the system down

  I have reports of existing Windows Server 2008 R2 and Windows 8 x 64 virtual machines as well as the test of the virtual machine.

  Windows 8 x 64 gives this error in a black translucent dialog box appears when starting a VM Windows 8 x 64, nine (before installation) or not:

  No 3D support is available in the host.

  3D virtual machine functions will be disabled.

  Windows Server 2008 R2 VM will display the EFI boot screen, then if you press F8 and choose recovery it will start loading the recovery files, but when it gets to the point where windows graphics loading screen with the Windows logo would be (after "Windows is loading files" text screen with the bar at the bottom, but before the GUI) you only ever see the graphic display and it crashes

  Opening of Fusion 5.0.3 and closing the Tech Preview, the virtual machines will be load without problem; no boot time error either.

  Seems to have something to do with the graphics, but still - no similar problems with 5.0.3

  Hi Siobhan,

  Thank you for reporting this issue. I checked your vmware.log and found this problem has been reported by an internal user, the internal PR is 1047175. Now it is fixed in the latest internal version. Since 10.9 comes after tech Fusion preview release, the issue is expected. Please be patient to wait for the next release of Fusion. Thank you.

• Help me REMOVE the duplicate folders My Documents and others created automatically when I install Virtual PC in XP Mode to run older programs. I removed the computer virtual and XP, but it does not remove the My Documents folders duplicate.

  While trying to run some older programs (Corel) in characteristic as advertised XP mode from my new Dell laptop and Windows 7 PC, I created Virtual PC and XP mode Setup.  Somewhere during this process, the system created in double My Documents, my pictures, my videos, files etc. that you can not (no authorization) access through Windows 7.  I understand that they may is accessible while you were in Virtual PC.   I came to my senses after the poor performance of Windows XP/Virtual PC and decided to remove remove these programs (and buy Corel for Win7).  I followed the instructions for a good dismantling of Microsoft who think in the end, these inaccessible files would disappear and I would have a struture of own file again.  However, duplicate inaccessible folders still remain and I can't get rid of them.  Believe me - it's a pain because it's very confusing when you browse folders.   There is no files in these folders, so there is nothing that we need to go.

  Please, for the love of peace in my family, tell me how I can get the PC back where it was when we first install Windows 7.   And - what's the problem of not having a complete control of my pc?  Personally, I'm offended that Microsoft has locked the users so that they cannot use their own brain - apparently I'm not the only one...  If you are willing to share, I would appreciate a detailed response.

  Hello, SuperMomNot

  Where are these records?

  Virtual PC will create only shortcuts to installed applications in XP mode, no records. The ability to open and save files that are stored on the host computer is made via the network sharing of files between the two.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I wore a work Application TV live Android-based BlackBerry App. When I run the app on simulator.iam BB10 see the following error

  When I run the app it shows first of all my wallpaper or the Welcome screen

  as shown in 1st.jpg

  

  Then after a few seconds, second page will display the page connection as 2 .jpg

  

  After loggin with my facebook account it will show the list of channels like 3rd.jpg

  as below

  

  When I click on the above content as stated in the 3rd.jpg

  IAM, seeing the error as below: correct my problems and guide me how to run my application perfectly.

  

  You must test with the Simulator 10.2 as well, absolutely.

  Yes, you need to download Android 2.3.3. Since the SDK Manager.

  Then, choosing it as a target in the properties for your project you can expect to get compilation errors. It will indicate the parts in the source code that must be changed or adapted to be compatible with the level of the API 10, respectively to allow your application Android runs correctly on the 10.1 BB Android Runtime (and probably on PlayBook as well).

  Here you have an article about it on the ActionBar compatibility in Android:

  http://blog.imaginea.com/Android-handling-ActionBar-compatibility-issues/

• Developer module shows that the blue square with a white cross, the images are displayed in the library ok but not im Module Developer

  Ive just updated to LR LR 5 6.

  The app seemed to run ok but as I was looking around any of my pics opens in the developer module, they have just a blue box with white cross?

  I have already mentioned this problem to the Lightroom engineers, and they are studying. In the meantime, the best thing to do is to ensure that your graphics card drivers are up to date, which can solve the problem.

• What happened to the "bookmark this page" in my bookmarks drop down box? I need! I am not computer savy and want to just scroll through all the pa marked with a bookmark

  The toolbar previous at the top of the screen re: bookmarks had the easier and is more agreed for me (and I'm sure MANY OTHERS) to just click, scroll, stop and click and fact! I'm on page that I bookmarked. So now, no? and what happened to the "mark this page" option initially drop down list? It's so easy. I have to develop records, files, plugins, etc...
  What in is he developed a method for people who are geeks high tech click on something that will lead THEM to last orders?

  Add code to the file userChrome.css below default @namespace.

  • http://KB.mozillazine.org/userChrome.CSS

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  /* move "Show All Bookmarks" to the top of the Bookmarks drop-down list */
  #BMB_bookmarksPopup #BMB_bookmarksShowAll {-moz-box-ordinal-group:0}
  
  /* move "Show All History" to the top of the History drop-down list */
  #PanelUI-history > * {-moz-box-ordinal-group:3!important}
  #PanelUI-history > label.panel-subview-header {-moz-box-ordinal-group:1!important}
  #PanelUI-history > #PanelUI-historyMore {-moz-box-ordinal-group:2!important}
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor such as Notepad to create a userChrome.css (new) file in this folder (the names are case-sensitive)
  • Paste the code in the userChrome.css file in the Editor window and make sure that the userChrome.css file starts with the default @namespace line
  • Make sure that you select "All files" and not "text files" when you save the file via "save file as" in the text editor as userChrome.css. Otherwise, Windows can add a hidden .txt file extension and you end up with one does not not userChrome.css.txt file

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• How to save an Image on a Sql database without losing the Vision Info?

  Hello

  is it possible to save an image with the info of the vision in a Sql Server 2005 database? I tried the method of ImagetoArray and saved table in a varbinary field, but the info of the vision is lost.

  Kumi-

  You can do something like this (assuming that you already have the Image):

  imageString of object = null;
  CWIMAQFlattenOptions options = new CWIMAQFlattenOptions();
  Options. Type = CWIMAQFlattenTypes.cwimaqFlattenTypeImageAndVisionInfo;
  axCWIMAQVision1.FlattenImage (Image, options, imageString Ref);
  Byte [] imageData = imageString (byte []);

  and then imageData will hold the content of the image.  You can pass this to CWIMAQVision.UnflattenImage () to restore the data.

  Greg Stoll

  Vision R & D

  National Instruments

• Need to Smartphones blackBerry help-apps does not connect to the internet, even with UMA

  Yesterday for a strange reason my app fmylife, even my aim and msn messenger does not connect to the internet. The blackberry browser connects either, only opera mini-tout this time I am connected to my wifi at home and I UMA. Calls and texting works fine. I tried several times to switch off the connection and then turn it back on, I restarted the phone, I took out the battery but nada.

  Any suggestion or help is greatly appreciated!

  -Hillary

  Hello!

  Official information is available here:

  • http://blogs.BlackBerry.com/2009/12/new-version-of-BlackBerry-Messenger-available/

  See you soon!

• Just installed CC - Apps does not start after the App Manager v7.0 update

  I get a few different error messages after installing creative cloud for the first time.

  I should mention that I accidentally uninstalled Adobe Application Manager, but then upgrade v7.0

  

  Hi DannLedwick,

  Please perform the following steps according to how you use.

  Mac OS X 10.7 and later versions

  1. Remove AdobeAAMDetect.plugin HD/Library/Internet Plugins /.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud.
  4. Sign in using your Adobe ID and password and download the creative cloud Application.

  Widows, 7 and 8 (64-bit)

  1. Using Explorer, go to \Program Files (x 86) \Common Files\Adobe and OOBE and rename it OOBE_old.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud.
  4. Sign in using your Adobe ID and password and download the creative cloud Application.

  Windows 7 and 8 (32-bit)

  1. Using Explorer, go to \Program Adobe and OOBE and rename it OOBE_old.
  2. Restart the browser.
  3. Go to https://creative.adobe.com/products/creative-cloud
  4. Sign in using your Adobe ID and password and download the desktop CC application.

  I hope this helps.

  Kind regards

  Sumit Singh