Boolean FPGA size in memory

Similar Questions

• T430 - maximum size of memory supported?

  Hi all!

  I got the thinkpad with lenovo 23511 t430 has 8 motherboard, I have also 4 GB of ram...

  What is the maximum size of memory ram support?

  THX...

  You should be able to use 2 strips of 8 GB of RAM for a total of 16 GB.

• What happens when managed, segment size of memory the server has

  Hi all

  Can anyone provide some information on what happens after reaching the size of memory managed server segment by... We are on 11.1.2.3. Our is a compact deployment with EAS, APS, RA, WA, web applications deployed on the single managed server work space. Our chunk size is set to 8 000 MB (8 GB) and I'm trying to understand what happens once the limit is reached, I tried searching for an answer in the forums of Weblogic, but did not find anything. So maybe if someone could shed some light on what would help a lot.

  Thank you
  Ted.

  I expect the Dungeon of increasing size until the segment maximum + fresh General, the gc must retrieve the memory to be allocated again and is not released to the OS.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• "IO Module\Reinitialize' IO NŒUD FPGA resets my memory default block (as defined on Project Explorer)

  I would like to reset my memory block to all zeros (only once) using the FPGA code. In my past experiences, it did not by the FPGA e/s 'IO done Module\Initialization' NŒUD.  To compensate for this, I used a SCTL that passes through each address of the memory block and stores a zero. The approach works fine, but I want to save space since we will quadruple the size of the code in a few months.

  FPGA: 7954r

  I/o module: 5761r

  Thanks for the research!

  

  Hey Denn_Mann,

  You should be able to set your memory to initialize to zero in the memory properties. Here is a link that should help you:

  http://zone.NI.com/reference/en-XX/help/371599G-01/lvfpgadialog/fpga_define_memory_db/

  Hope this Helps,

  Doug B

• In the parameter of size of memory to the CBD

  I was at the parameter inmemory_size 200 MB, when I bounced my database the value show is 208 MB. Can you help me understand why it turns into 208 MB while that bounce?

  sys@CDB1 > alter system set inmemory_size = 200M scope = spfile;

  Modified system.

  Elapsed time: 00:00:00.09
  sys@CDB1 > display inmemory_size

  VALUE OF TYPE NAME
  --------------------------------------------- ----------- -------------------------
  inmemory_size big integer 0
  sys@CDB1 >
  sys@CDB1 > shutdown immediate;
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect descr

  
  WARNING: You are more connected to ORACLE.
  sys@CDB1 > start
  SP2-0640: not connected
  sys@CDB1 >
  sys@CDB1 > exit

  C:\Users\179818 > set oracle_sid = CDB1

  C:\Users\179818 > sqlplus/nolog

  SQL * more: Production of the version 12.1.0.2.0 on Mon Mar 23 18:08:38 2015

  Copyright (c) 1982, 2014, Oracle.  All rights reserved.

  slow motion > Connect sys/oracle as a sysdba
  Connect to an instance is idle.
  slow motion > start
  ORACLE instance started.

  Total System Global Area 1660944384 bytes
  Bytes of size 3046320 fixed
  989856848 variable size bytes
  436207616 of database buffers bytes
  Redo buffers 13729792 bytes
  218103808 region in memory bytes
  Mounted database.
  Open database.
  idle >
  slow motion > Connect sys/oracle@cdb1 as sysdba
  Connected.
  sys@CDB1 > display inmemory_area
  sys@CDB1 >
  sys@CDB1 > view the inmemory parameter

  VALUE OF TYPE NAME
  --------------------------------------------- ----------- -------------------------
  inmemory_clause_default string
  inmemory_force string by DEFAULT
  inmemory_max_populate_servers integer 2
  inmemory_query string ENABLE
  whole big inmemory_size 208M
  inmemory_trickle_repopulate_servers_percent integer 1
  optimizer_inmemory_aware Boolean TRUE
  sys@CDB1 >
  sys@CDB1 >

  In addition to what others have said, I suggest that you set the value in memory for each PDB.

  If you do not have each PDB will inherit the default PIC, which means that any an APB could consume all available memory.

  See the table in the doc

  https://docs.Oracle.com/database/121/Admin/memory.htm#BABJEHAJ

  In a multi-tenant environment, the setting of this parameter in the root is the setting for the database entire container multi-tenant (PEH). This adjustable parameter in each plug-in database (PDB) to limit the maximum size of the column for each PDB IM store. The sum of the values of the PDB may be less than, equal, or greater than the value of the CBD. However, the value of the CDB is the maximum amount of memory available in the store column IM for the full CDB, including the root and all PDB files. unless this parameter is specifically set for a PDB file, the PDB inherits the value of the CBD, which means that the PDB can use all available for the CBD column IM warehouse.

  You can also specify a compression level for objects that you plan to store in memory. The compromise is compared to the performance space.

• Size of memory R830 HDD satellite

  I recently bought a Satellite R830 - 1 1.
  It was announced as having with 320 GB HDD memory size. However, the HARD drive does that 282GB total memory size.

  Anyone with this model had the same problem? How do solve you?

  There is no problem at all. Preinstalled OS uses small partition recovery, recovery partition Toshiba is it also and it is not included in quality when check you it in windows Explorer.

  Open the disk management option and there you can see the exact structure of the partitions.

• FPGA using playback memory to host VI

  Hello

  I use a PXI-7831R card and I put aside a block of memory onboard, I write it several times during the execution of the program FPGA. After everything is finished running, I would like to read this block of memory directly from the host VI with a reading of the memory. When I try to read this brief however, I get an array of all 0. I followed all the values that I store in memory during execution, and they are all valid and what I expect. I know that all the values are stored properly; the most funny thing is that when I stop running and start upward, the previous value is always in memory. The problem seems to occur in the function of reading the memory on my host
  VI.

  Do you have a suggestion or explanation? Is used to Read the working memory of the host VI normally, or the fact that they are running on the host system, modify or alter the functionality?

  Thank you much for the help.

  Hello

  You can access your memory of targets directly from the host VI. You will need to read the memory in another loop on the FPGA (preferably another loop) and write to a FIFO dma for communication directly to the host Interface as described above. Basically writing to the DMA fifo is identical to writing from memory, except in the case of memory, you have addresses that you can access individually and the DMA is a fifo (first in first out) so you can access individual pieces of information out of use.

  Here's a good tutorial on this.

  Kind regards

  Andrew

• [Labview FPGA]: block of memory use Xilinx HDL integration node

  Hello

  In my project, I would be developed my own VHDL module and integrated in my project of LV FPGA with a knot of integration.

  But for an evolution of my code, I wonder if it is possible to use in my own code VHDL, Xilinx library (as a block of memory).

  Thank you.

  You can use any Xilinx IP (or IP and others) in your external code. For example, if you generate a block of memory using block memory generator you can instantiate this IP in your own VHDL.

• Maximum size of memory card from blackBerry Smartphones.

  I was wondering what is the maximum memory capacity that the OS is capable of reading / acknowledging.  I know that the 2 TB SD micro card is not programmed to be released for almost a year or two, but our storms would even be able to use this much memory size?  Thank you

  Support memory card max depends on your operating system devices.

  Please find below the details-

  Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  BlackBerry Device Software media card size limit

  BlackBerry Device Software 4.2.0 up to 2 GB

  BlackBerry Device Software 4.2.1 up to 4 GB

  BlackBerry Device Software 4.2.2 up to 4 GB

  BlackBerry Device Software 4.3.0 up to 8 GB

  BlackBerry Device Software 4.5.0 up to 8 GB

  BlackBerry Device Software 4.5.0.81 and more up to 16 GB

  BlackBerry Device Software 4.6.0 and later up to 32 GB

• BlackBerry smartphones what type and size of memory card the "BOLD" support?

  I would like to replace the 1 GB memory card that comes with my "BOLD" with a larger size. What type of card, should I try to get, and what is the maximum size supported? I have been informed of stories contradictory on what I should look for any help would be appreciated. Thank you

  You are welcome!

  Here is a link to the Wiki entry that gives a good discussion on SD cards...

  http://en.Wikipedia.org/wiki/Secure_Digital_card

  So, this coupled with the information of KB of RIM, would say that BB must be compatible with SDHC cards... because they are (according to the level of the OS) compatible with SD cards 4 GB in size (for vs SD SDHC cutoff point.

  See you soon!

• What is the size of memory and what is the speed of the creative cloud?

  What is the size of the memory of the creative cloud and it's a replacement for a bigger hard drive?

  Please check: size of the installation file. CC and CS6 apps

• Custom partition sizes and memory system for ESXi 4.1

  With ESX 4.0, I would customize my partitions during the installation (see below). With ESXi 4.1 GUI there is no option to customize the scores.

  Now is the best practice to take default values? If not, what are the ESXi 4.1 recommended sizes of partition and how do you custtomize them?

  What memory system. In the past, I would rise to 800MB (1/2 of the swap partition). ESXi 4.1 design requires no it more? I can't change that vcenter as I could before.

  Who wish to understand best practice in this version build information.

  root (/) 5120

  swap 1600

  var 4096

  Home 2048

  opt 2048

  tmp 2048

  You cannot change the size of the partition. If this is embedded (installed to USB) then ESXi will use total 1 GB. In the case of installation (installation on a hard drive) ESXi will use 1 GB and create a separate partition from scratch 4 GB.

• View the size of memory for Equium A100-233

  Hi I have laptop very an Equium A100-233.
  In the specifications, it indicates that the built-in display memory can be up to 128 MB.
  The problem is that the driver has 64 MB max.
  As the memory is shared with the system memory, I guess I do need a MEMORY larger bar, so I put a 1 GB DIMM in there now, but it still says 64 MB max.
  So is there a setting I need to change to make 128 MB?

  I also think that you have the Satellite A100-233 and not a satellite.
  I put t found any unit Equium bearing that number.

  However, the specification says the laptop supports an Intel 950GM 8 MB to 128 MB shared memory.
  Upgrade memory max could be up to 4 GB. Then perhaps you need to install more memory to use the 128 MB

  But if it is not a special option for graphics memory changes so I assume that the driver will check the value of memory.

• Cannot change the size of the video memory in Satellite L30-113

  I have a Satellite l30-113 which has 1 GB memory and windows Vista.

  The size of memory that has been attributed to the vga is 319 MB.
  How can I decrease the video memory?

  Hello

  do you really mean 319MB? This machine only supports a maximum video memory 256 MB shared memory. So if you might have 32 MB (which is how I imagine rather memory assigned to your VGA) you can increase the video memory of this machine by changing the value of memory assigned in the bios of your machine.

  Do you know how to enter the bios?

  Welcome them

• Size MAX Sansa Fuze 2 GB Memory card?

  In a post, ask questions on the Maximum size of memory card that the Sansa Fuze can manage the response has been

  "32 GB cards works perfectly. 32 GB micro SDHC cards are not available yet. »

  In 2008, it was this changed with firmware updates?

  It's for the v1 and v2 or only v2? If a single v2, then what is the MAX for v1?

  also what is the difference between v1 and v2, this isn't the memory card SD card Maximum size it can handle?

  Whatever internal memory capacity, all rockets (v1s and v2s) work with cards up to 32 GB.