In the tutorial renders Sub unanswered question slides

Similar Questions

• 8 video on the question slide and how to play and to pause the video in a Captivate question slide

  
  Hello

  I use 8 Captivate and want to make a video on a question slide which I can do, but I want to play and pause the video.

  Is this possible?

  See you soon

  Erika

  Perhaps.  You can try to insert the video as a video synchronized multiple slides (even if it's on a single slide) which will then translate the video editing is locked in the timeline of the slide. You can drag the length of the blade of quiz and set the point of break of the quiz slide to where you want the video to pause.  Try in a quick experimental project and see if it does what you want.  The other way to pause the slide would be to use a smart shape button as other types of interactive objects can be added to the quiz slides.

• Multiples, fill the empty words on a question slide in Captivate 8?

  Is it possible to create a question slide to "fill the void" with more than one word?

  In other words, a question you 'most popular pets's _ and _. (With the answers being 'dogs' and 'cats'.)

  I've seen some old posts about this, but nothing recent - and I hope that there is now a solution in 8 Captivate.

  Thanks in advance for any help you can provide! I'm learning - slowly!

  Keith

  Of course, has always been possible, but there is still no possible partial score for this type of question slides. What should you?

  For this reason that I'd personally create a customized to FIB, using BER question slide or possibly dropdown training interaction.

• Need to turn off the yellow button highlight on question slides

  The highlight of yellow button that appears on question slides can be disabled? In addition, no one knows what the yellow highlight is tryng to tell the person answering the question? I think that it is displayed when the answer to a question can cause your score fall below the pass mark established for a test.
  Thank you for any assistance.
  

  Thanks for the suggestion of wedget. It will turn off the yellow highlight in the quizzes. I'll put it to work and see if it works.
  medmgmt

• The pre-rendered video - workflow question?

  I feel like I should know this, but good... I don't have.

  I finished the editing of a film to 90 minutes, many effects and layers in the timeline panel.  I have to make 3 different export the final video - one with stereo sound, an ac3 and other in 5.1.  But the video takes forever to render, some 60hours - and I wish I didn't have to repeat the video renderer for each of the audio versions.  Is it possible to render the video quality possible max and then just swap the audio tracks on it without re-rendering video?

  I know that I can make my calendar in the first, but if rendered or not - which seems to have no effect on the rate of permanent export... ?

  Thank you

  Matt

  You may export to a high-quality intermediate codec to create a 'master' video. Use something like AVID DNxHD or Lagarith Lossless, which are both free. Then, drag the resulting file in the top rail of the existing scenario. Export multiple H.264 it, but with audio files different on each. You can and probably should make COPIES of the sequence for each different output to keep them separate. Using the intermediate video, you will make all the effects, only once. Export in H.264 format from the intermediary will probably take just a couple of hours each then, rather than the 60 hours. According to the preview of the sequence rendering parameters, you cannot use any pre-rendered material because the preview codec might be a lower quality. Go DIRECTLY to the intermediary from the original sources of the timeline.

  I assumed that PC - if on a Mac, then export as ProRes 422 HQ for the intermediary.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• How to get an overview of the effects of the question slide?

  Captivate 5
  Win XPSP3

  
  Problem: how to have an overview of the effects (such as drop shadow) applied to the objects (jpg) on a question slide.

  Situation: Quiz to tell 5 random questions drawn from a pool of 50 questions multiple choice.

  
  Questions pool Panel:
  I'm building the Quizzing question slides workspace.
  I can view the slide and add questions and answers + jpg images that may be necessary.

  If I want to add a shadow to an image, I select the object (img) and place you in the effect controls panel.
  I add a drop shadow and can make adjustments, BUT the effect is not visible on the slide.

  
  The Live Preview button is grayed out and unavailable.

  
  Overview of the toolbar options are...
  F3 slide... Does not show the effect.
  F4 project... would take too long AND would be not safe to view the slide at which I had added the image effect.
  F12 browser... shows the entire project with 5 random questions but not necessarily the specific slide.

  Am I on the Filmstip Panel:
  There are several options preview...
  F8 this slide... If I select a blank Question slide at random, it shoots a question of the pool of 50, but not necessarily that I'm working on.
  F10 then 5 slides... same problem as F8

  Unacceptable workaround solution:
  I can create another pool 'test', containing one question.
  Copy slides edited to "test the pool and the preview with F8 or F10.
  A lot of extra work...

  Then the effect works and would weigh on the finished quiz... BUT... I can't (without a lot of P'ing on) Preview and adjust effects applied to a question slide.

  Someone at - it ideas?

  Concerning

  Frank

  If you want to test the effects on a particular slide of your pool of the Question, and you don't want to publish all slides to see it, just click with the right button on the slide in the question pool and select move Question to > the project main.

  Then, you will be able to preview the effects as with any other slide.  When you know that the slide is over, just get him back in the Question pool.

• Sanitation in a course with several slides contained and question slides

  My goal is to build a course that consists of 20 ~ content slides (each has a small video conference), followed by several questions each to compose a great quiz, each answer is counted toward the degree.

  So my current configuration is as follows:

  • Each slide of the Conference is followed by question slides 1-3.
  • An attempt is allowed by each question.
  • All questions must be answered correctly before a user can move to the next slide content.
  • Each conference is preceded by another slide of content and has a button 'Next' with 'Back to the Quiz' on measures of success.
  • Failure to answer a question correctly, the user is redirected to the previous slide in conference at the Review Conference. Then the user is redirected to the slide in question failed (via a button 'Next') and the next attempt to answer the question.

  I understand the scenario of reclamation and was able to set up the first slide of the Conference, followed by 3 question slides, and everything works as I want. Button 'Next' on the slide of the Conference works properly depending on where the user came to the Conference slide of.

  However, when the user finally arrives at the next Conference slide, as soon as they click on the 'Next' button on this slide, they are brought back to the last slide in question answered: in my case, it's the third question slide after the first slide of the Conference. The loop closes just here.

  Basically, there is no way for the user to pass the second slide Conference.

  Why the button 'Next' on the second slide Conference not to go to the first slide of the following question?

  What I am doing wrong?

  Thank you.

  Lyolya

  Captivate sanitation with failure - part 1 - blog of monkeylogic

  Captivate sanitation with failure part2 - monkeylogic blog

  Lilybiri, I think that the solution to my problems is very well explained in the posts above I found last night. With a few changes, I could get my course work just as I had originally planned.

  Here's what my structure/feature class now looks like in my test file:

  Title slide

  Video conference 1

  Questionnaire1 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 1 first incorrect answer; go to video conference 2 success OR the second incorrect answer.

  Video conference 2

  Questionnaire2 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 2 as soon as the first incorrect answer; go to video conference 3 success OR the second incorrect answer.

  Video conference 3

  .. and so on.

  The notation works, too!

  I'm actually very happy to have found a solution to what seemed to be an impossible feat. Thank you for your help, I appreciate the time you took to answer my questions. As a completely new Captivate user, I think that I learned a lot in the last week, thanks to your contribution, and that of many other generous people on the web.

  Thank you

  Lyolya

• Clickbox success legend appears as Question slide success Caption

  Is there a way to make the success of clickbox display captions as the legend of success of question slide?

  Specifically, I want to require that the legend of success clickbox displays until the user clicks anywhere on the screen to continue.

  It is a problem because I have several click boxes that use transparent success legends.  If a user clicks on several clickboxes quickly, the legends of success overlay above the other.

  For now, I won't use it legends of success.  I will create several scripts that show specific autonomous legends with a custom icon 'X' / click on the box for captioning.

  Thank you

  Micky

  I would never use a legend of success for something I want to display the time it will remain limited. This should be done with show/hide actions. Now, it depends on whether you want to hide a text automatically when another click box is clicked?

  Lilybiri

• Questions of question slide

  Hiya,
  
  First of all, I have to go back to something I know has been asked before:
  
  Is there no way to change the default Format Question slide or do we really format each question individually?
  
  Secondly, after going through the pain of each question, origins, places of text & colour setting etc shaped. Is it possible to format the review question area? The pots of black and white default horribly with our experience in business.
  
  Finally for now, the examination area itself - it doesn't seem to behave, it is not limited by the placeholder that appears on question slides? We need to give it the width of a blade to appear without hitting the other items on the screen?
  
  See you soon
  
  Mountainboy - unfortunately, miles away a decent mountain right now...

  Hi MountainBoy

  Yes, each question must be formatted individually. However, if you want to make developers aware that you want to see more customization with these, please click here and complete the form of wish.

  No way I know to influence the study area. See above.

  See you soon... Rick

• How to separate the question slides?

  I'm working on a tutorial. I wish it was questions all the tutorial to reinforce what is taught. The order would be kind of like 2 content slides, 2 question slides, 2 content slides, slides of question 2. Unfortunately, all the question slides get mix and cannot be separated even when I try to add two slides in question at the end, they automatically appear just after the first 2 question slides. How can I solve this problem?

  What version do you use? This has been the case in the very old versions, but for some time, you should be able to have the content of the slides between the question slides. Unless you don't talk about normal question slides but pre-test slides: who should be in the sequence at the beginning of the project.

• Introduce the tool button is not available for a question slide

  When I try to insert a button using the "Insert button" icon from the toolbar, the icon "Insert button" is not available. It happened in the background and is not an option for this slide. But it is for my other slides. Can someone advise me please? I don't know what happened, but let's assume that I've done something wrong along the way.

  Thank you!

  Scott, if you look a little closer at the Lynda tutorial, what happens is that they have set up an action if the user has not replied to the question correctly. The action led them to a slide in the presentation. Note that the blade they edited after the fact (it was slide 5) was a typical shift, NOT a question slide. Thus, the option was there to insert a button.

  See you soon... Rick

• Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

• How can I change the default setting for the objects in question slide?

  When I insert a question slide objects are displayed for the "rest of project".  Where would I go to change the objects of the main question to display for the 'rest of slide"slide instead of the"rest of project "?

  A model is something totally different, as I explained in this article. Save over and over time (with different names) could more easily corrupt your workflow with the 'model' is even quite dangerous Maybe it's what happened.  A model is a file of cptl where you want more than a simple design, have blades with placeholders, shares advanced, variable etc.. It can be used only with file, new project model and which means its resolution are solved.

• The title of the TOC for the random question slides

  I want to create a quiz that randomly pulls a pool of questions.  I think I know how to do that (rightly), but when I do, the table of contents is only show (title "Slide") the name/title of the question slide to chance itself, which is not really give any useful information.  I wonder if there is a way to show rather the title of the question which is selected (and present) of the random question slide.  This, in my opinion, would be much more useful to users taking the quiz.  Is there a known way to get there?  Thank you!

  

  Project files cannot be attached to these messages in the forum.

  Lilybiri has already answered your question.  The table of contents only shows the name of the random Question slide and can't give you the name of the slide of the random quiz question slide that is picked up from the Question pool when running dynamically.

  Essentially the Random Question slide is just a placeholder.

  However, I think that your idea of being able to have the selected slide display its name in the table of contents if you wish has some merit.  Then I suggest that you connect to an enhancement with Adobe for this request.  You never know...

• [JDev12.1.2, ADF, GlassFish 4] A few questions on the tutorial of Shay "Deploy Oracle ADF Essentials Applications to Glassfish"

  Hallo (Shay),

  I want to deploy my application Web ADF to GlassFish that is installed on a different server from the development computer.

  The application interacts with a MS SQL Server database.

  I have some doubts/questions on the tutorial of Shay https://blogs.oracle.com/shay/entry/deploying_oracle_adf_applications_to

  So far in the development phase, I deployed the application only to the JDeveloper-itegrated WebLogic Server on the development computer.

  Creating a connection pool

  • I could successfully creates a pool of connections only by copying the sqljdbc4.jar library in the C:\glassfish4\glassfish\libdirectory. Is this OK or should the library remain in C:\glassfish4\glassfish\domains\domain1\lib?
  • Is there a way to hide the password in the additional properties?
  • Is there any setting for the property should do (especially for MS SQL Server)? For example, somewhere I read that the isolation of transactions should be set to read uncommitted... but I did not understand why.
  • What is the difference between types java.sql.DataSource resources and java.sql.XADataSource?

  In JDeveloper application configuration
  

  • Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) set to java: comp/env/jdbc/MyDatabase_DB_SQLServerDS. If I change this field value to jdbc / < name_of_jdbc_resource_created_in_GlassFish >, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What's wrong?
  • JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?

  Taking care of the libraries used by the application

  • In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files I put in C:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?

  Other questions

  • What is the difference between putting a library in the lib of GlassFish folder and put it in the folder lib of Domain1?
  • Deployment procedure used by Shay in his tutorial might also be used to deploy the application on a remote production server?
  • Is there a way to manually delploy an application, for example by copying manually under GlassFish project folder?
  • My final goal is as follows. I have a clean Setup that allows me (1) to continue to run the application in JDeveloper on its built-in WLS, (2) to test the application to the GlassFish that I have installed on the computer development and (3) delploy the application on the remote production server. Could help me do that?

  These are a lot of questions.

  I thank in advance all the users who want to respond and I hope that the answers to these questions will help also others.

  Ciao,.

  Federico

  Federico - most of your questions is generic Glassfish questions that do not specifically have anything to do with ADF - I recommend that you post on the forum of Glassfish. (Or read the Glassfish documentation for things like the difference between directories and deployment/admin console).

  >>

  • Since the beginning of its development, the local configuration of the application Module has the name of data source (JDBC data source) parameter tojava:comp / env/jdbc/MyDatabase_DB_SQLServerDS. If I change the value of this field of jdbc /, as in the tutorial of Shay, it is not longer possible to run the application in JDeveloper (so using the WebLogic JDeveloper-itegrated server). Why? What is the problem?

  This is because JDeveloper uses an integrated WebLogic when you run and therefor cannot use the data source of Glassfish.

  I suggest that make you this change only when you go to deploy on Glassfish.

  >>

  • JDeveloper offers only the choiche GlassFish 3.1 as a platform for the deployment, but I'll use GlassFish 4. Perhaps this cause problems?

  We don't know, as the matrix of certification for the ADF will show that we have not tested/certified this combination.

  Oracle JDeveloper and ADF 12 c (12.1.3) supported systems

  >>

  • In the project properties, between the libraries and railways class there are a few additional libraries I've used in applications. Here's the JAR files that I put inC:\JDeveloper\lib. I copy these libraries on the production server? If Yes, where?

  Use the properties of project-> libraries and class path to add the jar or create a library and add it to your project.

  Make sure that this library is deployed by default.

  >>

  • Deployment procedure used by Shay in his tutorial can also be used to deploy the application on a remote production server

  Yes

  > Is there any property setting should do (especially for MS SQL Server)?

  Oracle ADF business with several databases components