In what concerns the Elimination of roles in the Administration of IOM and Console user

Similar Questions

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• What is the purpose of locallib and localconfig in DYNAMO_HOME?

  What is the meaning of locallib and local config in DYANAMO_HOME?

  What is their contribution to the overlay?

  Thanks in advance

  locallib can be used to add class files and that they would be added to the classpath variable when the application is built with runAssembler. Localconfig can be used to layer on the properties of the files. Probably better design to add class files in a directory lib of custom modules.

  Home/localconfig can be used to store files of properties that are common to all servers.

  Concerning

  David

• What is the difference between EPMA and Essbase Studio

  If the two are not used to design applications?
  
  And a really need Essbase Studio?

  What is the difference between EPMA and Essbase Studio

  ^ ^ ^ It's a little confusing, isn't? As far as I understand the role of EPMA, it is a way to share dimensions and common data between several products Oracle EMP including Planning, Essbase and HFM. In fact, I don't know if other products live in EPMA. What is EPMA not have is a great way to supply or manipulate the dimension and fact tables (or files). Oh, there are tables of the interface, but you will write the code/use the utility of dimension EPMA to load dimensions. I must say that I never tried to load through EPMA data so that someone else will have to pronounce on it. Once the dimensions are built, you can deploy Essbase (and other products) of common and specific to the database dimensions.

  Studio is the tool you will use to go against a data warehouse, or something terribly close a data warehouse to build Essbase databases. Just for Essbase - HFM, planning, etc. are not the targets of the Studio release.

  What gets confusion / intriguing, is that when EPMA deploy Essbase apps, it uses Studio under the covers to do. So the interesting implementations where people use Studio (which is much more flexible than EPMA because it is a development tool as opposed to a dimension/data management application) to read the tables, EPMA interface (and as far as I know, the EPMA base tables) and create Essbase applications like that.

  If you think that there is overlap, I agree with you, but you can see that they are not the same.

  And a really need Essbase Studio?

  ^ ^ ^ Do not use Studio to build Essbase databases. You can go hog wild in EAS with loading SQL rules if you want, even if at some point it will be probably easier and simpler to build in the Studio. Although the Studio has been mentioned as the replacement of EAS for awhile, I suspect the effort required to build a database in Studio will keep around for quite a while EAS or Studio Lite will be out. There is a lot to say (sometimes) for the incredible flexibility EAS/Essbase-Studio requires a more methodical approach and EPMA has a very formal set of standards and methods.

  Phew, I'm sorry, I wrote a book on this subject and I bet you get a lot of differences of opinion on that.

  If you are interested in the Studio, you could do well to take a copy of 'Look smarter than you are with Oracle Essbase Studio 11' of Glenn Schwartzberg. I don't get a penny from the sale while I was among the writers of copy (Hey, I got a mention in the acknowledgements). It's a good book and an excellent introduction to the tool.

  Kind regards

  Cameron Lackpour

• What is the difference between onMessage and Receive and PICK FLOW

  Hello
  What is the difference between onMessage and reception, ice AXE, and FLOW.
  
  the FLOW and FLIGHT?
  
  Thank you.

  Hello

  Please refer to this.
  http://download.Oracle.com/docs/CD/E12839_01/integration.1111/e10224/bp_appx_ref.htm

  You will get the pick activity message.
  Choose and receive almost serve same purpose.
  But in the choices that we will get OnMessage and OnAlarm branches and it runs branch OnMessage if he receives the message of partnerlink before the expiration of the time for the alarm. Otherwise, it executes OnAlarm branch.

  The activities of flow and flow N also serve the same purpose, but flow N, we can define number of streams running

  Concerning
  PavanKumar.M

• What is the best between Firefox and Aurora?

  What is the best between Firefox and Aurora?

  Hello DarshanK, that depends on what type of user you are probably: https://www.mozilla.org/firefox/channel/

• What is the difference between extensions and Plugins and Add-ons?

  I'm sorry if here is not the right place for this post.

  What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

  Kind regards
  Danesh

  Hi Danesh,

  You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

  Hope this helps!

• What is the Arch of fire and what is its function?

  What is the Arch of fire and what is it ' s function?

  Do you mean FileVault?

  If so, it is a method of encrypting the data on the hard drive to prevent access to the data by others. It is of first importance for mobile devices that take place around with you rather than office devices that tend to stay in a safer environment.

• What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

  What is the difference between Firefox and Namoroka 64-bit?
  I have a 64-bit computer. Which should I use?

  The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

  http://www.Mozilla.org/en-us/Firefox/new/

• What is the difference between dawn and the beta?

  What is the difference between dawn and the beta?

  Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.

• What is the tool to bless and why it prevents a clean reinstall?

  I'm helping a friend who has erased his internal HD due to a problem thinking it was a startup disk. She also didn't

  have a backup.

  I made an installation on a USB disk using diskmaker. When I try to start now the Option button, I get the recovery partition disk utility.

  When I select the bootable as the boot floppy installation disk, I get a message that it cannot be used as the startup disk. The Bless tool was unable to put the current startup disk.

  What is the tool to bless and is there something that can help me to do a clean install of El Capitan?

  Thank you

  Well, first of all, if you used your identifier Apple to download the operating system and then using your license to install on the machine of someone else will not work because the license is not transferable and is linked to the Apple ID used to get. the recipient would not be able to update the apps or reinstall because they need your Apple ID and password.

  If you use recovery, why not just use to reinstall the OS - have you tried designate the hard drive? I would try disk utility to repair the hard drive and the re-partition/format. As far as I know, bless tool is part of the operating system and tries to find a boot disk; I looked, and although I found a lot of questions, I was not able to find a definitive answer.

• iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

  iCloud often ask a security code 4 digits.  I have no idea what it is, my code is six digits.  What is the 4 digit version and where I put or find it?

  Have you implemented 2-step audit on your Apple ID? If you do this, then whenever you connect to icloud.com you are likely to be asked for the security code, which will be sent by SMS to your device of 'trust' - mainly the mobile phone you have registered with Apple.

  The six-digit code that you think is probably the password in your iOS device, which is quite distinct.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What is the difference between tear and Brüning cd

  What is the difference between tear and Brüning a cd.

  Hi SirNickLong,
  Here are a few links to explain the difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-burn-a-CD-or-DVD
  hope this helps,
  Eddie B.

• What is the difference between nc6320 and nx6320 laptops?

  What is the difference between nc6320 and nx6320 laptops?

  Can I use the same drivers for each of them?

  Hello:

  There is not much difference.

  If you want to compare all the details you can check this link:

  http://h18000.www1.HP.com/products/QuickSpecs/12428_div/12428_div.PDF

  You can probably use the same drivers for either, but they all have both their own support pages and separate driver.

  nc6320:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839154&lang=en&cc=us&TaskID=135&prodSeriesId=1839146&prodTypeId=321957

  NX 6320:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839169&lang=en&cc=us&TaskID=135&prodSeriesId=1839144&prodTypeId=321957

  Paul