In Windows 7 by default NTFS permissions

Similar Questions

• ColdFusion does not take into account the NTFS permissions

  I have seen some older posts who have applied this same question, but there is no resolution in the thread.  I posted on these threads asking if they have found a solution, however thought I would question myself and I hope someone has a fix/work around.

  CF10, W2008R2, IIS 7.5. With the help of a group with NTFS permissions to restrict access to pages.  Anyone can view the page if set a user name and password in the Windows Security window, click ok and immediately prompt again, click Cancel and you can see the content of the page.  Tested with an html page and html page is blocked properly.  It is my understanding that IIS passes control to cf, cf the cfm page.

  Since it comes to IIS 7.5, the checkbox to check if the file exists that worked in IIS6 it is not any longer, it is now under mappings.  I saw in a thread dscussion about editing a generic character mapping, but it is vague and did not have the parameters that I need to solve this problem, or I didn't get based on what I see on our server.  I put the .cfmHandler in 'file', and that did not work. I have a generic handler in the name column, but there are * in the path column, if it was not clear what's really magical generic mapping, I'm looking for.

  I can't believe this problem exists since IIS7, and there is no clear guidance on the subject. Someone must have thought of it... without going through NTFS permissions and not being is not able to restrict access to a group are not a small question, in my opinion anyway. I've looked everywhere, I hope that someone here knows what is the magic answer...

  Thank you!

  Tanya

  Tanya,

  Delete an e-mail to customer support ColdFusion ([email protected])

  Thank you

  VJ

• How to enable Windows Media Player default setting

  WinXP SP2 all updates from MS

  Obviously, I got iTunes my default *.wav and another file player.

  I would like to change it to Windows Media Player or as one I finally

  decide.

  How can I change the default file *.wav in WMP player?

  I looked in the HELP and the MS site, but I can't seem to glean on how

  to reset WMP as default *.wav file drive.

  Where are the other default application definitions defined anyway?  What has

  You must be one of these ultra easy questions!  :-)

  How to make your default player WMP10

  To make Windows Media Player, default media player, follow these steps:
  In Windows Media Player, click on tools, then Options.

  Formats under available file Formats tab, click Select all to select all the
  the file formats listed (or you can click to select each individual check box).
   
  Click on apply and then click OK.

  Another response of the community of Windows XP newsgroups

• How revrt to original windows vista by default for self-extracting zip files

  my vista does not automatically extract the zipped files

  How can I revrt to original windows vista by default for self-extracting zip files

  my vista does not automatically extract the zipped files

  How can I revrt to original windows vista by default for self-extracting zip files

  Take a look at this tutorial

  Support of zip files - restore

  http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html

  Recommendation:
  Try the 7-Zip program. It's free, widely used and highly recommended.

  http://www.7-zip.org/download.html

  ATTENTION: the download link is a 32-bit and one for 64 - bit. Make sure you choose one that suits.

• My screensaver to log has grown from a few more pictures of picuture of windows 7 by default

  My screensaver to log has grown from a few more pictures of picuture of windows 7 by default

  , but I need 7 default logon screensaver of windows, what can I do now?

  can anyone suggest me answers?

  Hello Arun,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  Try the following steps to set the screensaver to default Windows logon.

  1. Click Start, type regedit in the start search and press ENTER.
  2. Browse to the location:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\ LogonUI\Background
  3. On the right side, double-click the OEMBackgroundelement.
  4. Type 0 in the data of the value
  5. Click OK.
  6. Close the registry editor and restart the computer.

  You should now be able to see default logon screensaver.

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• RDM and NTFS permissions

  Hey guys. Quick question about the RDM and NTFS permissions. I have a server of physical file with a 1 TB lun presented to her. I need to convert this machine to a virtual machine. I know I can set the lun existing to the virtual machine as RDM (virtual) and retain the benefits that ESX provides, that is to say, vMotion. I tested and it works fine. However, I have 2 questions about this configuration:

  1. Actions/NTFS permissions will be still intact after I have present the lun ROW for the operating system called? Man, I sure hope that if. This test was not so easy. Anyone can check it by experience?

  2. Any way to hide the lun ROW of the Wizard "add storage? When present you a lun to a host ESX group and use as RDM, it still shows upwards in the wizard when I try to add storage. Now, I know that I can keep track of the ID lun that prevent me from potentially selecting and formatting as VMFS... but my co-workers my not be aware. My point is, I wouldn't see it kill himself accidentally. Am I the only person annoyed with this?

  Any help is most appreciated, as always. Thank you.

  Hello

  1. Actions/NTFS permissions will be still intact after I have present the lun ROW for the operating system called? Man, I sure hope that if. This test was not so easy. Anyone can check it by experience?

  Yes

  1. Any way to hide the lun ROW of the Wizard "add storage? When present you a lun to a host ESX group and use as RDM, it still shows upwards in the wizard when I try to add storage. Now, I know that I can keep track of the ID lun that prevent me from potentially selecting and formatting as VMFS... but my co-workers my not be aware. My point is, I wouldn't see it kill himself accidentally. Am I the only person annoyed with this?

  If logic unit number is defined as a ROW, add storage won't be able to use it, or even see. It does not to my RDM.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Now available on Rough Cuts: ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment '
  Also available "VMWare ESX Server in the enterprise"
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• Windows Vista Home Edition: The permissions of Reseting back to zero/all around, or default system restore reset. ?????????????

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: 2 Questions actually & I have Windows Vista Home Edition...:

  (1) I begun to change some permissions under the Security tab of the properties, and now they are screwed... How can I reset just all permissions to the default settings? Help, please! Boy, I'm arrested for murder... My laptop about to be thrown through the window of a building-sky.

  (2) is there a way to reset or restore my system? I don't like to lose anything it all. I saved what I want or need. I just want to start from scratch...

  In fact, I have 1 other question... Whole reason I messed my permissions first is because I've had this laptop second hand and I did EVERYTHING to get rid of the old owners as a user name and I IMPOSSIBLE... It drives me crazy. I am the owner / administrator and there is no other user accounts, but still all my programs and files have this other names of people on them.

  * Thank you very much to all those who can help me!

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You must always wipe a used computer and start over.

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• External hard drive with Windows NT File System (NTFS) Format

  I bought an external hard drive Samsung M3 about a year (1 to). I used a lot for about 3 months on my mac and then left it stored until I need it again. I then tried to use it today and for some reason, the format converted to Windows NT (NTFS) file system. Looking at other forums, the only way to change what has been suggested is to erase and format it in NTFS for Mac. However, I have 500 GB of data on what I don't want to erase. Does anyone have any suggestions, or any reason that the format has changed all of a sudden, do my hard drive now ReadOnly cannot think?

  1. the format has not changed

  2. There is no such format NTFS for Mac

  Would you like to start your story please?

• Windows server 2012 default behavior services

  Hi all

  I recently installed Windows server 2012 R2 on my PC and found that the Windows update service "wuauserv" starts and stops automatically after a certain time. I think the same happens for Windows 8 and 10 more. The startup type indicates that automatic (early release). Through various articles and forums, I realized that this is the default behavior, introduced in Windows where inactive services will stop automatically and works only when triggered by certain policies.

  I want to change this default behavior and want Windows update services to be able to run always. Could you please tell how to make these changes.

  Kind regards

  ADI

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How can I automate the NTFS permissions?

  Our directory structure has redundancy: C:\Project1, C:\Project2, C:\Project3, etc.
  Under each folder of the project, the subdirectories are similar: C:\ProjectX\Sub1, C:\ProjectX\Sub2, C:\ProjectX\Sub3, etc.

  We would like to allow to assign permissions to subfolders different NTFS, once the main project folder is created. By example, if I create C:\Project1, I want these subfolders to create and with these permissions:

  • C:\Project1\Sub1: Write privs to Group1
  • C:\Project1\Sub2: Reading only privs for group2
  • C:\Project1\Sub3: Write privs to everyone

  I think that this should be done either through Group Policy or script (even if other alternatives would be appreciated). Could someone give us help on how this started? References would also be appreciated.

  Thanks in advance.

  Hello

  The question you asked is best answered in the Technet Forums.

  You can post your questions here:

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

• Where can I find and download Windows XP Pro to repair my "Windows Update by default places"?

  I'm unable to receive Microsoft updates. Fix Windows - it says: "the default Windows update locations have changed and must be repaired. For change to repair windows update locations for window by default parameters". So I ran ' sfc/scannow' in the command prompt, it says I have and missing or corrupt files and I need to insert my XP Professional cd-rom to correct. My XP Pro CD has been lost long ago. I have Internet Explorer 8 on my system. Here is some info on my computer system. Any help to fix this would be greatly appreciated, thank you.

  Operating system	Microsoft Windows XP Professional
  BootDevice = \Device\HarddiskVolume1 BuildNumber = 2600 BuildType = multiprocessor Free Caption = Microsoft Windows XP Professional CodeSet = 1252 CountryCode = 1 CreationClassName = Win32_OperatingSystem CSCreationClassName = Win32_ComputerSystem CSDVersion = Service Pack 3

  You can run checkdisk from a command prompt, but it would be better to burn Hiren's boot cd a copy or burn a bootable cd with the recovery on her console.

  Open the cmd prompt

  type chkdsk c: /r press on enter

  type y for Yes, press enter

  Type exit press on enter

  restart the pc

  It is a long process, percentages fluctuate, it is normal, let checkdisk finish

  If errors were found and corrected then run again until no error

  You can view the report in the event viewer.

  go to start, run, type eventvwr.msc and click ok

  in the event viewer go to the application directory by clicking on applications in the left pane

  in the right pane, scroll to Winlogon and double-click

  After this do the following please:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

   

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  Remove all found, restart, and run again until analyses race clean, these can be removed later if you wish.

  ====================================

  also answer the following prayer:

  What is your current antivirus?

  What browser and version are you running?

  Please don't give the EXACT error message, no paraphrasing, thank you

• Windows administrator existing default user profile does not

  My profile for the default administrator in my Windows XP computer account doesn't work anymore. I see everything when I explore the drive, my documents, desktop, Favorites, etc., but it does not bind to the administrator account any longer. I logged in fine yesterday, but today when I connected, the profile didn't work anymore. It has affected Outlook, My Documents. etc.

  I am to bind those to everything he does tp the Admintsrator account.

  Hello

  1. are you able to connect to the default Administrator successfully account?
  2 could you give me the exact error message that you meet?
  3. What do you mean by 'Windows XP computer not working anymore'?
  4. What do you mean by the "does not attach to the administrator account over '?

  If you are able to successfully start using the default administrator you can restore your computer to a previous state.
  Reference:
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows zero as default game

  I have a Belkin Wireless USB adapter for my XP desktop. It comes with software that is buggy and hard to use. However, if I right-click on the icon of the software in the in the taskbar notification area, I choose the option "activate Windows Zero Configuration (WZC). I can then use the normal, built-in-to-XP Network Manager. When I unplug and replace the card, however, or when I restart or start the computer, the software will automatically launch and I have to configure it to use Windows Zero new. Is it possible to allow zero default Windows?

  I have a Belkin Wireless USB adapter for my XP desktop. It comes with software that is buggy and hard to use. However, if I right-click on the icon of the software in the in the taskbar notification area, I choose the option "activate Windows Zero Configuration (WZC). I can then use the normal, built-in-to-XP Network Manager. When I unplug and replace the card, however, or when I restart or start the computer, the software will automatically launch and I have to configure it to use Windows Zero new. Is it possible to allow zero default Windows?

  Hello

  You can activated by the services control panel:

  Open a command run and type:

  services.msc , click [OK]

  On the Service control panel to locate the Belking Service and Disbale it.

  Locate the Windows Automatic Configuration and Automatic start. Close the Service Control Panel and restart your machine, does that help?

  NASS - http://www.nasstec.co.uk

• How to configure the Windows Vista Firewall default

  How can I configure the default windows firewall

  Hello

  If you use a 3rd part firewall uninstall it

  or if you are using an internet security suite that includes a firewall, disable/turn off the firewall

  then that;

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security and then click Windows Firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended) and then click OK

  and you should have only ONE firewall running

  more than ONE firewall running can cause blockages of the system, etc.

• Cannot install the files .exe or Windows updates, "you may not permissions appropriate to access them.

  I completely downloaded from the internet does not run or install .exe files. I get this message: Windows cannot access the specified device, path or file. May not be the appropriate permissions for access you to them.

  Also, I can't get updates to Windows, such as Windows Defender. And even if I manually downloaded updates, always I can't install them.
  Help, please.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off