Windows server 2012 default behavior services

Similar Questions

• BSOD Windows Server 2012 starting MSMQ service

  Hello

  We have a problem with a server get BSOD when we start a service related to MSMQ. Whenever we start the service as a user on the field, we get the noexecute BSOD memory execute attempt. When we start the service as local system, it starts without a problem. I got the crash dump here:

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * c:\symbols* http://msdl.microsoft.com/download/symbols

  Microsoft (R) Windows debug 6.3.9600.17298 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\170\120314-11828-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: Server, suite: TerminalServer SingleUserTS
  By: 9200.16912.amd64fre.win8_gdr.140502 - 1507
  Computer name:
  Kernel base = 0xfffff800 '48476000 PsLoadedModuleList = 0xfffff800' 48742aa0
  The debugging session: Wed Dec 3 14:41:01.892 2014 (UTC + 01:00)
  System Uptime: 0 days 0:04:09.904
  Loading the kernel symbols
  .

  Press (cdb, ntsd, kd) ctrl-c or ctrl-BREAK (windbg) to drop the charges of symbol that take too much time.
  Run! SYM noisy before .reload to track symbols loading issues.

  ..............................................................
  ................................................................

  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Verification of error CF, {7f982e340e0, 791000010fdb1025, fffff8800485a5e0, 80000005}

  Probably caused by: mqac.sys (mqac! ACCreateQueue + a77)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)
  An attempt was made to execute non-executable memory.  The guilty driver
  is on the stack trace (and usually the current instruction pointer).
  When possible, the name of the guilty driver (Unicode string) is printed on
  verification error screen and saved in KiBugCheckDriver.
  Arguments:
  Arg1: 000007f982e340e0, virtual address for the execute attempted.
  Arg2: 791000010fdb1025, content PTE.
  Arg3: fffff8800485a5e0, (reserved)
  Arg4: 0000000080000005, (reserved)

  Debugging information:
  ------------------

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT_SERVER

  BUGCHECK_STR: 0XFC

  Nom_processus: mqsvc.exe

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17298 (debuggers (dbg). 141024-1500) amd64fre

  TRAP_FRAME: fffff8800485a5e0-(.trap 0xfffff8800485a5e0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 000007f982e0c950 rbx = 0000000000000000 rcx = 0000005dff1fecd0
  RDX = 0000005dff34e988 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = 000007f982e340e0 rsp = fffff8800485a778 rbp = fffff8800485ab80
  R8 = fffffa800e623980 r9 = 0000000000000521 r10 = fffffa800ec547a0
  R11 = 0000000000000006 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI pl nz nc
  000007f9'82e340e0?              ???
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80048661ef1 to fffff800484d0540

  STACK_TEXT:
  fffff880 '0485-408 fffff800' 48661ef1: 00000000'000000 fc 000007f9 '82e340e0 79100001' 0fdb1025 fffff880' 0485a5e0: nt! KeBugCheckEx
  fffff880'0485 has 410 fffff800'48588980: fffff880'0485a5e0 ffffd8e9 '9e6056e2 fffffa80' 0ec547a0 00000000' 00000000: nt! : FNODOBFM: 'string' + 0x33f2d
  fffff880 '0485-450 fffff800' 4850aabd: fffff880 '0485 a 500 00000000' c0000016 fffffa80 '0e603b00 fffffa80' 0e623980: nt! : FNODOBFM: 'string' + 0x33e85
  fffff880 '0485a4a0 fffff800' 484cdfee: fffff880 00000000'00000008 00000000'00000000 00000000'00000000 ' 0485a5e0: nt! MmAccessFault + 0x3ed
  fffff880 '0485a5e0 000007f9' 82e340e0: fffff880'00dc5297 fffffa80 '0ec54770 00000000' fffff8a0 00000000' 011ce7c0: nt! KiPageFault + 0x16e
  fffff880 '0485-778 fffff880' 00dc5297: fffffa80 '0ec54770 00000000' fffff8a0 00000000' fffff980 00000000' 011ce7c0: 0x000007f9'82e340e0
  fffff880 '0485-780 fffff880' 00dc60d7: 00000000' 0000005d 00000000 ' ff34e988 00000000'00000000 00000000'00000000: mqac! ACCreateQueue + 0xa77
  fffff880 '0485a7f0 fffff800' 488ab127: fffffa80 '0e5ed520 fffffa80' 0d50ecf0 00000000'00000521 00000000'00000000: mqac! ACDeviceControl + 0x62b
  fffff880 '0485-890 fffff800' 488c02f6: 00000000 00000000' fffff8a0'00000080 00000000 '00000000 00000000' 00000000: nt! IopXxxControlFile + 0x7e5
  fffff880 '0485aa20 fffff800' 484cf553: 00000000'00000000 00000000'0000000 c fffff6fb '7dbed078 fffff6fb' 7da0ff30: nt! NtDeviceIoControlFile + 0 x 56
  fffff880 '0485aa90 000007f9' 8a702c1a: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceCopyEnd + 0x13
  0000005d 'ff34e928 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007f9'8a702c1a

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Mqac! ACCreateQueue + a77
  fffff880'00dc5297 85 c 0 test eax, eax

  SYMBOL_STACK_INDEX: 6

  SYMBOL_NAME: mqac! ACCreateQueue + a77

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: mqac

  Nom_image: mqac.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 5010abc2

  IMAGE_VERSION: 6.2.9200.16384

  BUCKET_ID_FUNC_OFFSET: a77

  FAILURE_BUCKET_ID: 0xFC_mqac! ACCreateQueue

  BUCKET_ID: 0xFC_mqac! ACCreateQueue

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0xfc_mqac! accreatequeue

  FAILURE_ID_HASH: {d1daca31-6256-358c-65b5-69af54392880}

  Follow-up: MachineOwner
  ---------

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• 6 of WSUS on Windows server 2012

  Hello

  I am trying to configure SCCM 2012 (painfully)
  I get a lot of error messages.
  WSUS does not work: can not synchronize updates.
  wsusservice (in services.msc) will not start (error 193 oxc1)
  If wsus works 50% (you can see some Update Manager wsus on windows server 2012) because some service: do not start WSUSservice and ContentSyncAgent!
  In sccm 2012 config console manager, status of the status/component system, I get a critical error for SMS_WSUS_Control-Manager:
  Failures have been reported on the "our FULL domain name server" WSUS server for WSUS 'ContentSyncAgent, WSUSService' components,.

  Solution: Check that the failing WSUS components are installed and running.
  another mistake criticism for SMS_AMT_operation_Manager:
  The service point of band off unable to connect at the point of registration.
  Our config:
  WindowsServer 2012, sql server 2012, sccm 2012 sp1 on hp proliant Server
  It really painful
  Thank you if you have an idea

  Hello tomy13,

  Microsoft Community is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. As your question is about 6 of WSUS on Windows server 2012, your question would be better addressed in the TechNet for ITPros forums.
  Click on the link here to transfer your question in TechNet in the Windows Server forum.

  Sincerely.

  Marilyn

• Unable to use the service Windows Server 2012 EAP - MD5

  Hello

  I tried using MS Windows Server 2012 the authentication server installation, I turned on the NPS server, installation and set up roles. Then I followed https://support.microsoft.com/en-us/kb/922574 thread to add support of MD5 by default it is obsolete.

  Now I'm able to see the added registry entries and you can select the MD5 method, but I do not know where to give the password of the application. I added the InvodeUsername and the InvokePasswordDialog in regedit but its only gives me such an option to select the user name and password.

  I'm getting MD5 challenge sent by 2012 to the authenticator switch and finally Reject-request.

  Can you know me how to provide the password in 2012.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Put into service Windows Server 2012 R2 takes a long time

  I created a simple bluerpint with Windows Server R2 2012 machine and the deployment of the Clone related vCAC. The whole process of commissioning is to take a very long time (> 1 hour). It seems that most of the time is passed to the workflow to work CustomizeOS stage. What could be the problem? I have not found the newspaper to find out where she is spending time. Can you help me solve this problem?

  I could solve this problem. There is a new Agent for Windows Server 2012 R2 guest. See VCAC 6.0.1 agent 2012 comments stuck Windows

• Image acquisition turns off in Windows Server 2012

  I am running Windows Server 2012.  Kind of a necessity, that I also hosts the website of our company.  All updates are installed, and desktop experience is enabled.  Image acquisition Windows is listed in Services, but was originally set to manual by default.  I tried just to start the service, but it stops automatically after about 30 seconds.  I tried the automatic configuration, but it does not start on its own.  I get no error message, and I checked dependencies, which seem fine departure, because repeatedly referenced in many other assignments.  Fresh ideas?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• WAAS for RADIUS and Windows Server 2012 NPS server configuration

  I have trouble getting our WAAS to authenticate devices and connection via RADIUS.  Running NPS on Windows Server 2012.  Confirmed that my device WAAS can ping the IP address of the RADIUS server.  Using the attribute Type of administrative service under network policies.  Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »

  Right now, I can connect with only the local default user and password name.  Here are a few config for WAAS, running version 6.2.1:

  RADIUS server key *.
  Server RADIUS auth-host 10.194.10.13 port 1645
  !
  connection of local authentication enable secondary
  enable login authentication RADIUS primary
  local authentication configuration enable secondary
  Service radius Authentication configuration Select primary
  failover of authentication server unavailable

  I confirmed that my shared key is entered correctly on the WAAS and the NPS.  I have the switches/routers Cisco works well on the same RADIUS server.

  Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS?  If so, please share additional measures you have taken to get things to work.

  Hi Paul,.

  Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.

  To confirm, you can check the corresponding error in syslog WAAS:

  authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius: RADIUS server did not respond (timeout 5 (sec))

  Also, this defect would not affect peripheral on software 5.x WAAS.

  The problem will be solved in 6.2.3 to come free.

• Unable to print a PDF with adobe reader 10.1.12 Windows Server 2012 R2 RDS session

  Situation: My users are connected with RDP on Windows Server 2012 R2 Datacenter Remote Desktop Service and when they connect, their share printers are installed.

  When users open a pdf file, they cannot print it. When trying to print a file, nothing happens... Any file sent to the printer...

  I saw a difference between the shortcut icon of the adobe reader for users who have this problem and other software.

  No problem:

  

  Problem:

  

  If anyone can help me

  Thank you!

  Hi Ajlan,

  To solve my problem, I uninstalled adobe reader X with "Adobe Reader and Adobe Acrobat Cleaner Tool", rebooted the server, installed Adobe Reader XI and restarted again.

  For some users, this fixes the problem, but with a few others, I had to define default Adobe Reader again.

  I tried without using 'Adobe Reader and Adobe Acrobat cleaning tool' front and the adobe reader X software was not really uninstall.

  Thank you

  Kind regards

  Sullyly

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• Active directory Migration from Windows Server 2003 to Windows server 2012

  Hi all

  Currently, I use the windows Server 2003 R2 Enterprise SP2 with AD, DNS and DHCP server. I want migration of these services to new fresh Windows Server 2012 R2 Standard machine. I migrate to active directory after this statement: http://social.technet.microsoft.com/wiki/contents/articles/22249.migrate-active-directory-from-windows-server-2003-r2-to-windows-server-2012-r2.aspx, he gets with success, but the IP configuration on the source server not migrated to the destination server. So, all of you know that why the source server IP configuration cannot migrate to the destination server?

  Help please give me an advice.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• R2 Windows Server 2012

  Hello

  I use windows server 2012 r2 and have some difficulty at the start of services such as, AenService, gupdte, the windows module installer does not start, I tried to start it manuely but the result was the same, please give me the solution

  Concerning

  Jean baby

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Can not remove the print server role (Windows server 2012)

  I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

  

  but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

  

  I try to stop a link of service in this role (as a spooler, printing...) but samething.

  If anyone can help me, I really appreciate it.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error message from Windows Server 2012

  Hello

  We have an application that runs on multiple virtual machines of Windows Server 2012. The same version of the application runs correctly on all machines except one. On the race we get repeated .NET runtime, error messages in the Windows Event Viewer.

  Application: Vsop.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception info: exception code c0000005, exception address 6C3A23B7
  Battery:

  I checked the windows crash dump and you can observe the message.

  "the thread attempted to read or write to a virtual address to which he has no access.

  I couldn't find a reason for this behavior on a specific system. Can anyone provide some tips on why or how to fix?

  Thank you!!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Prerequisites for domain controller promotion is not for windows server 2012

  For windows server 2012 check of preconditions for the promotion of domain controller has failed. TCP ports required by Active Directory Domain Services are already in use on this computer. You must remove or reconfigure the services that currently use these ports (88, 389, 636, 3268, 3269).

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  This particular configuration is with Coldfusion 11. There is no errors in newspapers and the w3 service still works as are application pools. All websites and app pools run with transmission of authentication request.

  ColdFusion does not work with windows authentication and may be enforced as if reconfigured integrated instance to do this, if this isn't a matter of colfusion.

  Here is what I tried:

  1 I created a new user account with admin rights and disconnected and logged in as them and then make changes to the password on the server, and that didn't make a difference.
  2. I checked that all Web sites using the request pass through authentication.
  3. I checked that the application pool is also using the application-pass-through authentication.
  4. I looked to find errors in which case newspapers but don't see anything there either
  5. I also searched a failure in coldfusion logs and saw no more relevant here either, but I got colfusion running without IIS in any case.
  6. search of the roots of web for coded passwords hard and found nothing.

  If you have any ideas or any ideas let me know.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer