Inaccessible disk D:

Similar Questions

• Cleaning of the inaccessible disks Replica

  So I just browsing my data warehouses through everything to ensure that everything is fine when I came across three disks inaccessible marked replica.

  I did some research and was unable to find much on this. All of our related clones are working properly and all systems are running. My questions is there a way to tell if this is actually used or can I delete it? I have attached a ss of what I found.

  VMware View 4.6

  ESxi 4.1

  Hello
  You can check the settings of the pool to View Manager to know what line is used.  If you delete a replica that is used, you can cause serious problems for the related clones.
  When you visit account what replica, you can delete, you can use this KB:
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1008704
  Best regards
  Patricio Cerda

• I have more email for a previous Apple ID how can I get the PW?

  I have more access to the e-mail that I initially set up my Apple ID also.  I have music going to the cloud but I can't access it or it doesn't go to the cloud becase I do not access it, so be it I was stumped by the present and have a lot of recorded music on a hard but inaccessible disk via the cloud.  How can I recover this old pw, mus i lied on my date of birth, because it's the first question and I cannot answer!

  If you are unable to remember your password, security issues, do not have access to your address of rescue or are unable to reset your password for any reason, your only option is to contact the Support of Apple ID, to speak to an operator you should explain that your problem is related to your Apple ID This way you can be attributed to the assistance, even if you do not have an AppleCare plan.

  You will need to be patient with the process and to be ready to prove without doubt that the account belongs to you. Do not expect access to be restored immediately and if you are not the owner of the Apple ID saved to the device the account will not be reset.

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• Inaccessible machine always appears as the use of disk space on vCenter

  Hello

  I use an ESX 4 server as a host of a vCenter.  One of our machines has probably been removed via the ESX itself some time ago and it does not exist on the store data, but when you browse the host when it is connected to the vCenter, I see the machine appears under the name "inaccessible".  Now, when I look at the virtual host computers tab, I see that the machine uses up to 25 GB of disk space, but this machine does not really exist on the data store.  I tried refreshing and so forth, but the machine still appears as existing and too much space.  Can someone explain why this is the case?

  Also, I can remove the machine from the inventory and no block will be reserved for this machine?

  Thank you

  Ofer

  If you are sure, that concerned VM is not necessary, do a right-click the VM and remove from the inventory. It won't support a swap file lock in the data store as the heartbeat for this virtual machine is already lost.

  Usually, a VC service is restarted and the removal of the virtual machine directly from host should solve the problem.

  Thank you

  Ramesh. Giacalone,

  VCP 3 & 4, MCTS(Hyper-V).

  Please give points, so useful

• How to solve the problem of 'ASM disk group is inaccessible' slave VM rac2?

  People,
  
  Hello. I want to install Oracle 11 g RAC 2 using 2 virtual machines (VM main rac1 and rac2 VM slave) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
  
  Grid and data base RAC have been installed successfully for VMS rac1 and rac2.
  I use the slave rac2 VM test data grid and CARS because rac1 disk is full.
  The problem is that the OCR file is not available or currupted in the rac2 VM slave. To know his reasons, I check permission on disc ocr as below:
  
  [ora11g@rac2 bin] $ pwd
  / U02/11g_db/ora11g/racdb/bin
  
  [ora11g@rac2 bin] $ srvctl start asm
  
  RPRC-1070: could not verify if the ora.asm resource is registered
  Cannot communicate with crsd
  
  [ora11g@rac2 rac2] $ pwd
  / u01/app/Grid/log/Rac2
  
  [ora11g@rac2 rac2] $ cat alertrac2.log
  
  Last lines:
  [/ u01/app/grid/bin/cssdagent (5779)] CRS - 5822:Agent ' / u01/app/grid/bin/cssdagent_root "disconnected from the server. Details at (: CRSAGF00117 :) in u01/app/grid/log/rac2/agent/ohasd/oracssdagent_root/oracssdagent_root.log.)
  2012-03-20 13:44:55.914
  [ohasd (5149)] CRS-2112: the service ODE started on node rac2.
  2012-03-20 13:44:58.588
  [ohasd (5149)] CRS - 8017:location: / etc/oracle/lastgasp has 72 Advisory reboot log files, 0 were announced and 0 errors
  2012-03-20 13:45:07.555
  [ohasd (5149)] CRS - 2772:Server "rac2" was awarded to 'Free' the pool.
  2012-03-20 13:45:10.108
  [ohasd (5149)] CRS-2302: failed to get profile negotiators. Error CLSGPNP_NO_DAEMON (the demon GPNPD does not work).
  2012-03-20 13:45:10.251
  [gpnpd (5368)] CRS - 2328:GPNPD began the rac2 node.
  2012-03-20 13:45:13.037
  [cssd (5443)] CRS - 1713:CSSD daemon is launched in cluster mode
  2012-03-20 13:45:37.132
  [cssd (5443)] CRS - 1707:Lease acquisition for node rac2 number 2 completed
  2012-03-20 13:45:37.727
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK3; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:37.986
  [cssd (5443)] CRS - 1625:Node rac1, number 1, was closed manually
  2012-03-20 13:45:37.991
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK2; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:38.633
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK1; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:56.956
  [cssd (5443)] CRS - 1601:CSSD Reconfiguration is complete. Active nodes are rac2.
  2012-03-20 13:46:00.557
  [ctssd (5834)] CRS-2403: the time synchronization Service on rac2 host Cluster is in observer mode.
  2012-03-20 13:46:00.576
  [ctssd (5834)] CRS-2407: the new Cluster Time Synchronization Service reference node is host rac2.
  2012-03-20 13:46:01.000
  [ctssd (5834)] CRS-2401: time synchronization Service Cluster started on host rac2.
  2012-03-20 13:46:11.097
  [crsd (5856)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:12.085
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:13.338
  [crsd (5925)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:14.217
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:15.438
  [crsd (5940)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:16.313
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:17.539
  [crsd (5955)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:18.392
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:19.537
  [crsd (5988)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:20.468
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:22.636
  [crsd (6003)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:23.615
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:24.781
  [crsd (6022)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:25.713
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:26.885
  [crsd (6037)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:27.799
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:29.021
  [crsd (6052)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:29.925
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:31.136
  [crsd (6067)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:32.040
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:33.247
  [crsd (6082)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:34.172
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:34.173
  [ohasd (5149)] CRS - 2771:Maximum attempts to restart the resource 'ora.crsd '; does not restart.
  [ora11g@rac2 rac2] $
  
  The output of alertrac2.log, we have seen disk group ASM is inaccessible. So my question is:
  
  How to solve the problem of "ASM disk group is inaccessible" in the rac2 VM slave?
  
  
  Thank you.

  user8860348 wrote:
  People,

  Hello. Thanks much for the reply.

  Yes. I put the entry "SQLNET. AUTHENTICATION_SERVICES = (NTS)"input file sqlnet.ora.

  I ran the commands below:

  [ora11g@rac2 bin] $ pwd
  / u01/app/Grid/bin

  [ora11g@rac2 bin] $ ps - ef | grep pmon

  16219 ora11g 8602-0 12:29 pts/2 00:00:00 grep pmon

  [ora11g@rac2 bin] $

  [ora11g@rac2 bin] $ export ORACLE_SID = + ASM2
  [ora11g@rac2 bin] $. / sqlplus / as sysdba

  SQL * more: Production version 11.2.0.1.0 Fri Mar 23 12:33:15 2012

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Connect to an instance is idle.

  SQL > startup pfile = ' / u01/app/grid/dbs/pfile ".
  ORA-01031: insufficient privileges
  SQL >

  Sign in as SYSASM as

  . / sqlplus / as sysasm
  >

  As we see above shows the command $ ps - ef | grep pmon, my question is:

  First of all, are ' 16219 8602 ora11g 0 "process ID?

  Secondly, we need to kill one by one? For examples: kill-9 ora11g? Kill-9 16219?

  Laughing out loud. It's not the running process.

• Drive is inaccessible: power outage when the decryption of the disk encrypted by using BitLocker Drive encryption

  Original title: bit locker drive encryption

  Hi all...

  I encrypted my 1 TB with the bitlocker drive encryption drive and while I was decoding, there is power failure my disc got screwed up... now I can't even format my drive, not to mention to recover all data of this...

  the drive is displayed in the my computer and disk management sometimes but when I try to do something with it my system hangs...

  What should I do? Help, please!

  Try http://support.microsoft.com/kb/928201 Bitlocker repair tool and see if that helps.  Make sure you use the right download for your version of Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to open firefox, it says "cannot load your Firefox profile. It may be missing or inaccessible. » ?

  The reason why I deleted my firefox profile on my MAC and uninstalled firefox is because it was not appearing in the application menu or the dock and I have found whenever I wanted to use it. I couldn't put it on the dock or anything like that.
  When I downloaded again and tried to start it, there was the error message, "unable to load your Firefox profile. It may be missing or inaccessible. "And now I can't use it at all.

  You must remove the file profiles.ini so because Firefox registers all the profiles you see in the Profile Manager in this file and delete the file on disk, Firefox will display this error message.

  • http://KB.mozillazine.org/profiles.ini_file

  Otherwise, you will need to use the Profile Manager to create a new profile.

  • https://support.Mozilla.org/KB/managing+profiles

• Boot volume inaccessible when trying to install W2000 - 6000 SP

  We bought a Satellite Pro 6000 for work and it had Windows XP. The devices we use with it require Windows 2000 so I uninstalled Windows XP with the startup disk and started the installation of Windows 2000 using a USB floppy drive. Once the first 4 discs have been run and the CD starts as a blue screen appears showing the inaccessible boot volume.

  Any ideas of what hurts?

  Hello

  Use you able to install WXP recovery CD? Is there a message inaccessible boot volume or the inaccessible boot device?

  By the way here's something very useful for users to W2K
  http://mcpmag.com/features/article.asp?EditorialsID=133

  Good bye

• HP TouchSmart 610 BIOS, all elements are gray and inaccessible?

  Hello

  HP TouchSmart 610-1010sc

  BIOS HP version 6.09 (FRIEND BIOS 2.6 x)

  I am able to get into the BIOS with F10, but every time he asks: ' "user CURRENT password:".

  When I type the password (empty) computer gives 2 long beeps and it enters BIOS.

  But the PROBLEM is that all the elements are disabled...

  Which means that all the items are grayed. If I look at the instructions of the BIOS (HP bios for motherboard F01 settings) there are many editable parameters (BLUE) as boot disks, lan onboar elements, load default configuration etc.

  But in my computer, everything is visible, but GRAY and inaccessible. I can't access or modify anything even not "Load setup defaults". Only active items are "Exit ignorant changes" and "Exit save changes."

  What's not here?

  How can I access BIOS so that I can change the settings normally?

  Finally the BIOS and boot LOGO obtained works!

  I noticed that, after CMOS, reset all the product data in the SYSTEM IDs inside the HP BIOS section me wiped out.

  So I had to enter my BIOS by CTRL + F10 instead of normal F10, so that the ID SYSTEM fields are editable.

  Then just re-typed all the information of two stickers found the back of the computer.

  First content SERIES only and PART SKU No.. Second was BUILD ID, BYTES and NAME OF THE PRODUCT FUNCTIONALITY.

  NOTICE! Note that you can type BYTES of FUNCTIONALITY that once, when recording it will be grayed out out/no editable.

  After saving these changes to the BIOS and restart the computer, the LOGO is the settings the computer BIOS and fully accessible back once more

• M1V66UA: problem with recovery media disk drive

  my laptop is HP envy x 360 bought around December 2015(it is still guaranteed).

  Today, I had a problem with my laptop (inaccessible boot device error) and a HPteam even could not able to solve it and told me that the recovery order media disk.

  the problem is:

  I bought the laptop in the United States when I was a customer place and now I am in India .

  HP India has informed me that they will not consider my request for recovery media order disk since I bought the laptop outside the India and told me to contact them.

  My question is

  How can I order the disc of recovery in India?

  Hello

  First of all, you can download microsoft iso and burn it to DVD or USB without needing a key, so do a good job of it for future use.

  If you have a real Windows 10 installation the system map is saved as your key with microsoft, so you do not need a new.

  Once you have fixed starting problems, MAKE YOUR OWN RECOVERY MEDIA IMMEDIATELY.

  Jelly Beanstalk will find your product key for future use, but it is locked to the system board.

  Piriform Speccy and Belarc Advisor will also add your serial number for a knowledge need.

  If in doubt please ask.

• Qosmio G20: XP Installation disk & SATA USB

  Hello

  I have Toshiba Qosmio G20 and I have the following problem:
  When I try to install new windows using the SATA drivers via the floppy USB drive as a process of installing classic XP SATA drivers are needed 2 times:

  First time as usual, you will need to press F6 to specify drivers via the USB floppy drive, that this is no problem. The works of diskettes.

  Afterworlds it is the second time that when the same SATA drivers are required from diskette (drive A :). After the selection of the 1 install Windows XP blue screen 3 options, before the first reboot. The installation starts copying the files required for the instillation process and asks AGAIN COPY THE SATA DRIVERS for more usage of the system.

  On this stage the USB Floppy is see inaccessible computer cant that it has USB floppy A:.
  So I can't continue with installing XP because for the next reboot is no SATA driver and no hard drive is detected.

  I tried this several ways and several versions of XP Setup, but the same result.

  Please tell me how to fix the problem will be updated firmware available which can see the USB floppy plugged into this scene.

  Kind regards
  Konstantin

  Hello

  Did you install the RAID driver?
  Well, I put t know if it because of this problem, but as much as I know the Toshiba RAID driver must be added during the installation, when prompt to 'press F6 if you need to install a third-party RAID or SCSI driver.

  To do this, please download the Toshiba RAID driver from the web page of Toshiba driver download and extract the zip to a disk file. Connect the floppy drive to your computer before starting the installation.

  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for XP or 2000 as required.
  Press 'Enter' to continue the installation.

  When you use Windows Setup to partition or format the HARD drive, the RAID driver is deleted in the process.

  Please tell me if you have resolved the problem.

  Best regards

• How can I friendship recovery disk size D?

  Computer of Gateway comes with Vista Home Premium, I added 1 SP.  He got a HDD GB 116; divided into a player of Local 'C' GB 106 with 70 GB of free and a RECOVERY drive "D" of 10 GB which is full.  How can I increase the size of the RECOVERY disk?

  Hello gydcgreen54,

  Thank you for using the Microsoft Windows Vista Forums.

  What kind of computer Gateway do you have?  You made a copy of the a ' drive for a restore point?  Most of the OEM (manufacturers) include a restore on the computer partition. This partition contains 'all' on the computer at the time, it was built and is used to restore the computer to its original state - in some cases that a CD/DVD is also provided. Recovery is to start from a CD or «Press F11...» "message at startup.  Some manufacturers make the partition hidden or inaccessible to protect.

  I also recommend to check with gateway support based on your make and model under/forums.  Please state councillor.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Access removable disk error... "Z:\ is not accessible. Access denied»

  1. my (2) flash drives have been available last week

  2. this week, they are inaccessible (on a single computer only)

  On the second computer, I can access the drives normally.

  Clearly, I changed something on the computer problem, but I don't remember what it is.  Probably a registry setting.

  I can't open the drive.  I get the error 'Z:\ is not accessible.  Access denied'

  Although he is running as an administrator ,attempts to format the drive are unsuccessful.  This error is: "You have not sufficient rights to perform this operation"

  Attempts to access the drive through the command line are unsuccessful on the problem computer.

  The drive can be seen in disk management, but may not be formatted or partitioned here (computer problem only)

  On the first computer, everything is normal.  ERGO, the problem is with the second computer.

  Can anyone suggest where I should look in the registry (or elsewhere for that matter).

  Thank you for your help.

  Yaacov

  I don't have an answer after all!

  I just find ControlGuard Endpoint protection had been installed over the weekend.

  Time of work of hacking wee turn it off! :-)

• I'm recovering using vista recovery disks.

  I'm tring to get using vista recovery disks, after disc 2 is done, it comes out saying there is lack of disk space for the temporary files needed for the operation. It said that windows was able to start and tells me to insert the windows installation disc, choose the language and click on repair computer. Status 0xc000000e code, the boot selection failed because required device is inaccessible. How can I get out of it and what to do next?

  Hello

  First question is why have you tried to do a recovery?

  You may have a hardware problem or on your recovery media may be corrupt.

  See you soon.